Link for MSEG and EBELN for Mvt 541.

HI,
Actually I need link to get the mataerial document numbers against Sub contract Po for mvt 541.
I need to develop a program to capture the material document nos against Subcontract PO and calucate reamain components against each po with respect to GR for that PO and line item.
Please provide link for MSEG and EBELN link for mvt 541.
Thanks
Venkat

Hi Venkat,
Check EKBE table. U will find Material doc no corresponding to the PO no.
Reagrds,
Amitava

Similar Messages

  • Are there any alternatives for mseg and mkpf

    I had to display from table S032...following fields.
    S032-LETZTABG --> Date: last (i.e. most recent) goods issue
    S032-LETZTVER --> Date: last (i.e. most recent) consumption
    However the data was not properly filled in s032 table.  So I went for mseg and mkpf table to get budat based on moment types.
        SELECT   MSEG~MATNR
                 MSEG~WERKS
                 MSEG~LGORT
                 MSEG~BWART
                 MKPF~BUDAT
                 INTO TABLE IT_MSEG
                 FROM MKPF AS MKPF  INNER JOIN MSEG AS MSEG
                 ON
                     MKPFMBLNR  =  MSEGMBLNR  AND
                     MKPFMJAHR  =  MSEGMJAHR
                 FOR ALL ENTRIES  IN  T_OUT_TMP
                WHERE MSEG~MATNR  EQ  T_OUT_TMP-MATNR
                  AND MSEG~WERKS  EQ  T_OUT_TMP-WERKS.
    Are there any other alternative table for mseg and mkpf...
    Because my above coding  ( which includes above  SELECT of mseg and mkpf )got performance issue...
    Could you please suggest me anyu other alternative for mseg and mkpf ...

    Try to include the BUDAT in the selection of the MKPF.. if you don't have any restriction in MKPF than just pass an empty range.
    RANGES: S_BUDAT FOR MKPF-BUDAT.
    SELECT
    MKPF~BUDAT   "<<<
    MSEG~MATNR
    MSEG~WERKS
    MSEG~LGORT
    MSEG~BWART
    INTO TABLE IT_MSEG
    FROM MKPF AS MKPF INNER JOIN MSEG AS MSEG
    ON
    MKPF~MBLNR = MSEG~MBLNR AND
    MKPF~MJAHR = MSEG~MJAHR
    FOR ALL ENTRIES IN T_OUT_TMP
    WHERE
    MKPF~BUDAT IN S_BUDAT   " <<<
    MSEG~MATNR EQ T_OUT_TMP-MATNR
    AND MSEG~WERKS EQ T_OUT_TMP-WERKS.
    Regards,
    Naimesh Patel

  • VoFR PVC for data and PVC for voice with FRTS

    Dear friends, It is my first experience configuring VoFR. My access rate is 128 Kbps and the CIR is 64 Kbps. I configured the router following some cisco examples using "vofr cisco" and FRTS into my "map-class" for voice. You can see my config in the attach file.
    It works fine, the quality voice is good (2 calls)when the link is congested up to 100% through bi-directional ftp download.
    However, I cannot get a speed upper to 64 Kbps. I understand that it is as FRTS works and it is necesary to QoS for voice. But I`m paying to my service provider a price for 128/64 and I never won`t get a speed greater than 64 Kbps.
    How can I solve this problem without increase my CIR?. It has a additional cost.
    I`m reading that some solution could be create two PVCs: one for voice and one for data. How should I configure them to get a burst traffic for data upper to 64 Kbps without affect my quality of voice?
    Thank you for your suggestions.
    Edwin.

    The following document has some explaination on the queueing on frame relay interfaces. This might help you understand how to configure different pvcs for voice and data and utilise the given cir fully.
    Understanding Queueing on Frame Relay Router Interfaces
    http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a00800a4754.shtml
    VoIP over Frame Relay with Quality of Service (Fragmentation, Traffic Shaping, LLQ / IP RTP Priority)
    http://www.cisco.com/en/US/tech/tk652/tk698/technologies_configuration_example09186a0080094af9.shtml

  • Difference between BPC for MS and BPC for NW

    Hi All,
    I'm looking for some comparative analysis between BPC for MS and BPC for NW. Can you please give me your points or direct me to some link/material where I can find such stuff.
    Primarily I'm focusing on following two points:
    - How would the integration to SAP BI work (=differences between SAP BPC (NW) and SAP BPC (MS))?
    Could the same degree of automation be established?
    - I was told that  SAP BPC (MS) could be much faster implemented than the NW version. Is this really the case? Why?
    I would really appreciate your earliest response.
    Regards,
    Shabbar

    Hi,
    BPC for MS runs on Microsoft platform where as BPC for NW runs on SAP Netweaver.
    BPC for NW is tightly integrated with SAP BI all the dimensions and applications created in BPC NW can be seen in BI system in the form of Infoobject (dimensions) and Infocubes (applications).
    Performance depends on the complexity and scalability of the project. BPC for NW may undergo lots of improvements and developments in future versions.
    search SDN u will get help.
    Hope this helps
    Regards

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

  • HT204053 i use one apple id for icloud and one for itunes  and now it wont let me since i reset my phone now  i up graded to iphone 4s still the same problem

    please help me fix this problem I have one id  for icloud and one for itunes that i share with my husband

    If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Can you have two Apple IDs on one IPAD? One for school and one for home?

    Can you have two Apple IDs on one IPAD? One for school and one for home?
    If so do you know how to do it?

    It depends on what you want to do.
    You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
    But if you are looking for a way to flip everything between different appleIDs, then no.

  • Idoc for materials and service for same contract.

    Dear All
       I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01  and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
    Regards
    Somnath

    Hi,
    It is not clear to me if you are working with sapscript or smartforms.
    You have only to find a variable which identifies the kind of invoice
    I do not know that variable so i use an example variable
    for sapscript:
    /: IF &VBDKR-FKTYP& = '1'
    /  INVOICE
    /: ELSE
    /  SERVICE ORDER
    /: ENDIF.
    In a smartform you can also do something like that.
    but There you work with conditions (eq, BOOLEAN)
    You have only to find the right variable
    success,
    Gr., Frank

  • I bought 4 apps 1. the sims 3 for £4.99 2. fifa 14 premium pack for £2.99 3. plauge inc for 99p and monopoly for 69p i bought a £15 app store voucher and i only have £1.66 left but i should have £5.34 left please help me

    i bought 4 apps 1. the sims 3 for £4.99 2. fifa 14 premium pack for £2.99 3. plauge inc for 99p and monopoly for 69p i bought a £15 app store voucher and i only have £1.66 left but i should have £5.34 left please help me

    Three possible causes:
    - You got charged twice. On a computer go to iTunes Store>View Account>Purchase History and see what you got charged for
    - Maybe the difference is due to tax. Again the Purchase History will list the total price including tax for each purchase.
    - You had a negative balance (you owed money) before you redeemed the card.
    If problems contact iTunes:
    Contact iTunes

  • I have multiple devices (imacs, lap tops and ipads) all connected to a NAS server.  Can I create a user for myself and one for my wife, and each have our own apple ID, and Itunes accounts, but all share the same media on NAS drives?

    I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive.  Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives?  So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?

    You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs.  (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.)  This will prevent you from ending up with merged data.  You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
    This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

  • How can I have one "family" Apple ID and two icloud accounts one for me and one for the wife?

    MacVirgin!Just got new Air and iMac (iphones on the way). How can I have one Apple ID but two iCloud accounts (one for me and one for my wife)? I have set up one iCloud account and am attempting to share contacts between iMac, iCloud and Air, however iMac and iCloud are not in sync? I must be missing something very simple.

    ok. I set up the imac and Air with one user account. this was used to activae iCloud on both machines and I have now se up one iCloud account and managed to share calander and contacts between the two. Ultimately both me and my wife will have an iphone and we wish to share calenders and contacts. We both also use the imac and air on one user account. It looks like I need to set another user account then activate iCloud in my wifes Apple ID

  • Can I have 2 itunes accounts on one computer, one for me and one for my wife.  We want to synchronize different content to our iPhones.

    Can I have 2 itunes accounts on one computer, one for me and one for my wife.  We want to synchronize different content to our iPhones.

    HELLO EVERYONE,
    WELL I HAVE TWO ACCOUNTS TOO... ONE FOR MY BROTHER AND ONE FOR ME...
    THIS IS WHAT YOU WILL HAVE TO DO..
    EVERYTIME YOU OR YOUR WIFE LOG ON TO ITUNES YOU WILL HAVE TO GO TO THE TOP LEFT AND AT THE TOP IT WILL SAY STORE..
    YOU WILL HIT LOG OUT AND LOG OUT OF YOURS..
    THEN GO TO THE SAME PLACE AGAIN AND HIT LOG IN AND THAT SHOULD HOPEFULLY HELP..
    ANYTIME YOU HAVE A QUESTION JUST GO TO MY PAGE AND ASK ME[:
    THANKS,
    BK[:

  • I have two iTunes accounts, one for music and another for audiobooks.  I want to merge them and maintain only one iTunes account.  How do I do it?

    I have two iTunes accounts, one for music and another for audiobooks.  I want to merge them and maintain only one iTunes account.  How do I do it?

    You cannot.

  • I have set up two users, one for myself and one for children.  The computer automatically logs in for the children with no password required.  When the children go to spotlight and type in a search criteria all of my files show up.  How do I prevent this?

    I have set up two users, one for myself and one for children.  The computer automatically logs in for the children with no password required.  When the children go to spotlight and type in a search criteria all of my files show and open up.  How do I prevent this?

    Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
    Make sure your kids' account(s) do not have admin privileges.

  • Can windows xp use a different sound card for itunes - I want to use a sound card for itunes and another for all other apps

    Can Windows XP use a different sound card for itunes - I want to use a sound card for itunes and another for all ther apps

    To the best of my knowledge, Windows is not capable of setting a specific sound card based on the app being used, it's all or nothing.
    Try a google search or search the Microsoft site.

Maybe you are looking for