Link for SDN TV for XI Concepts related

When I searched SDN for the same, I got the below link
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#xi [original link is broken]
But this link is navigating to some other store.
Can anybody give me the right link for XI related
Thanks
Kiran

Hi Kiran,
Please refer below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/50b3ea61-202e-2a10-9aac-b39f6c8f7357 [original link is broken]
and look for the related one
You can use the HTTP adapter. Refer to following SDN TV demo of the HHTP adapter for details steps involved into it.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
Thanks
Swarup
Edited by: Swarup Sawant on Mar 12, 2008 7:33 AM

Similar Messages

  • Feedback for SDN Day, SAP TechEd and the SDN Clubhouse for Bangalore

    So what did everyone think?

    <u><b>SDN Day -</b></u>
    I have already blogged on it <a href="/people/bhavesh.kantilal/blog/2006/11/07/sdn-bangalored">SDN Bangalored</a>. But , would like to again state that the concept was good and that the expectations for SDN Day 2007 are even higher! The fact that we are expecting more tells the fact that SDN Day B'lore 2006  was amazing!
    <u><b>SAP TechED -</b></u>
    Well, here my verdict is mixed. There were a few sessions that were marked as Advanced, but were actually sessions that were for beginners. Advanced Sessions need to be truely advanced.
    It would have been more fun and useful if there had been an open house session where the actual Developers of the Netweaver Products or the RIG from every development area had help Open House sessions to understand and address the ideas / questions and issues of us developers. Maybe something of this sort can be arranged at the techED's 07.
    There were a few sessions did actually catch my interest and were very useful as well, but overall I expected lots but got less
    <u><b>SDN Clubhouse:</b></u>
    I was there at the clubhouse every minute i was not attending a session at the Tech ED. Need I say more craig
    Maybe more quizzing and more freebies next year ( human nature to be greedy and ask for more  )
    To  the entire SDN team -- Special thanks to you people for the amazing experience! Hoping 2007 kicks off more surprises and more community events.
    Regards
    Bhavesh

  • How to find out the link for the tables for sub contract PO

    Dear All,
    How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
    Please provide the solution for the Table related to ABAP.
    Thanks,
    V.V.

    Hi,
       Make use of the table EKKO, EKPO...
    For subcontract please select the option in EKPO-PSTYP.
    Regards
    GK.

  • Eed link to the tutorial for creating a Interactive Adobe forms using WDA

    Hi Friends,
      I need link to the tutorial for creating a Interactive Adobe forms using WD ABAP

    Hi,
    Before posting search once in sdn for Blogs or articles.You will get information.Any how please look at this video demonstartion.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20029530-54ef-2910-1b93-c41608ae0c90
    and check these blogs
    https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/24b9e126-0b01-0010-e098-f46384fad9f3

  • How do the limits in cal exec for vertical sensitivity of a 5911 relate to the vertical sensitivity spec (noise referred to input) in the 5911 user manual?

    One of our 5911's came back from calibration and it failed 'Vertical Sensitivity" at...
    Range = 20V
    Sample Rate = 2.5MS/s
    Reading: 145.119 dBfs/sqrt(Hz)
    High Limit: 152.000 dBfs/sqrt(Hz)
    and...
    Range = 0.2V
    Sample Rate = 1MS/s
    Reading: 113.859 dBfs/sqrt(Hz)
    High Limit: 128 dBfs/sqrt(Hz)
    How do these limits relate to the "Vertical Sensitivity" (Input Ranges) on page A-3 on the NI PCI-5911 User Manual?  http://www.ni.com/pdf/manuals/322150e.pdf  For 20V the user manual spec is 174 dBfs/sqrt(Hz) and for 0.2V is  the same 128 dBfs/sqrt(Hz).  
    How might this impact previous error calculations?
    Thanks,
    Darrow

    Hi Darrow,
    First I will link to the Manual Calibration Procedure and Specifications for this board for reference.
    There are a couple of sources of noise on this module that need to be taken into account. One shown in the vertical sensitivity table which you have already referenced.  This is amplifier noise density which is dependent on gain settings.  The second is ADC noise density.  This is dependent on sampling rate.  These values can be found in the Dynamic Range section of the Specifications.
    The two noise sources are uncorrelated, and depending on your combination of sample rate and range, one will typically dominate and can be used as an estimate.  Otherwise you can obtain the RMS total through the root sum of squares method.  This total is what is used in the calibration tests.
    There is a VI that has been set up for calculating the noise-floor of the 5911.  You can find it here if you wish to see an illustration of the calculation (check out the block diagram).
    If your module is failing calibration for any reason, you cannot rely on it meeting the accuracy specifications. This specific type of failure will impact the dynamic range/noise floor of the board.  Likely tens of dB that you have lost given the measurements you report.  Small signal measurements will definitely be affected.  I recommend repair or replacement to ensure the quality of future measurements.
    Jennifer O.

  • Removing links in Self-Service for My Employee

    Hi
    We are trying to implement BP ESS and MSS 1.0 on EP 7 and ECC 6.0. We have imported the source code into NWDI track and are able to make changes in the source code. Now our requirement is that we want to remove the link in "Self-Service for My Employee" under Related Activities iView. We couldnt find the application which shows this iView.
    Path: MSS -> Team -> General Information under Related Activities.
    Please help.
    Regards,
    Piyush.

    Hi Sharadha,
    I have already tried modifying that DC. But I am unable to find the exact component (view). When I tried executing the application through NWDS its not showing "Related Activities" area and links. Also when we log in with a user who doesnt have any MSS rights "To display data, first select an employee" is displayed. And for MSS user whose configuration is not complete in R/3 "No data available" is displayed. Can this be controlled from R/3?
    Regards,
    Piyush.

  • Link multiple Apple IDs for Facetime

    Hello most helpful people! I'm sorry if this has been asked before but I haven't been able to find a solution.
    So, in my household, we have a "family" iPad and each one of us has our own iPhone, Macbook, etc. (we're so close to being a pure Mac family...) I was wondering:
    1) Is it possible to give each family member their own iCloud account to allow for iCloud backups for their own device
    2) Allow each device to download its own content with their own Apple ID? (This I'm willing to change to a communal ID for App downloads, etc. as I can disable automatic downloads correct?)
    3) Allow the communal iPad to ring&amp;pick up FaceTime calls for each member (I was thinking have a communal apple id and then somehow linking each email to that id? would that work?
    Currently, I tried to link another apple id to "receive messages/calls at" but it gives me an error as the emails are already associated with an apple id.
    It'd be awesome if someone can help me devise a way to go about this! I'm completely stumped on how to approach this (and really, just doubting if this is even at all possible with how apple has set itself up.)
    Thanks in advance for the input!

    You can't just make up an email address to use as an AppleID since Apple send a confirmation/validation email to that address before enabling the account. If you can't get that email, you can't verify the account, so you're hosed.
    All is not lost, though. There are many free email services you can use to get a valid, working email address which could be used as your alter-ego. Try Google's GMail for one.

  • Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Error while adding landed cost G/L account 5207010003      needs DR assignment for dimension 1;  fill in DR-related fields

    Hi Rajesh
    Go to System Initilization =>  General Settings => Cost Accounting => Check the Dimension1 has Block Posting.
    Relase the Block and add the Document it will add.
    With Regards
    Balaji

  • Using D-Link DI-624 Router for "G" Wireless Purposes

    I want to use an old D-link router in another part of the house to provide wireless "G" connectivity to my older devices, so I can use 5 GHz band for "N" connectivity exclusively via my Airport Extreme (Older version, not Gigabit).
    I go upstairs, plug the D-Links WAN port to the jack that connects to one of the Airport Extreme's LAN ports downstairs. I shut off dhcp server on the D-Link. I turn on the D-link's wireless capability (unencrypted for now, just for testing).
    When I plug a computer in to one of the LAN jacks of the D-Link, I have full connectivity to the internet. And I see the wireless signal from the D-Link which has a unique SSID. Unfortunately, while I can connect to the D-Link wirelessly, I cannot get to the internet.
    I'm sure I have something configured wrong.
    Questions:
    1. I have the Airport Extreme set to hand out ip addresses in the 10. range. Should I set up the D-Link router to get a static IP address from the Airport Extreme? How do I do that. Some sites suggest a 10 series IP address, but outside the range of the DHCP addresses that the Airport Extreme usually hands out.
    2. Any ideas on configuring the DI-624? I've shut off DHCP server (everyone says to do that). But Are there any other settings?
    3. Some tech help sites suggest not using the WAN Port at all on the D-link, but rather, connect to one of the LAN ports. Does this make any sense? Going from one of the LAN ports on the Airport Extreme to one of the D-Link's LAN ports.
    4. Once I get the wireless G network running, I'll fix the encryption.
    I think that in order to answer this question you'll need some first hand knowledge of the DI-624. Unfortunately, the DI-624 is now a discontinued product and there is little information available on D-link's web site.
    Thanks in advance for any advice.
    kenny

    If a Mac plugged into a LAN port on the D-Link gets internet access, the AirPort Extreme base station (AEBS) and D-Link are both configured properly.
    The wireless side of the D-Link should also be acting properly since LAN access is working.
    The most likely problem is that your Mac has incorrect DNS information in the System Preferences->Network preference pane->AirPort area.

  • Hello, I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    Can you describe what “the operation is failing” means?  What is happening and how is it different than what you expect?
    Also, what product are you trying to update manually, and do you have a link to the page of instructions, so we know what your attempting to do?

  • Embed a web link into an image for email

    Embed a web link into an image for email.  Anyone knows how to do this?

    Fantastic!!
    Where did you get that?!   I'll try it with the "poster frame" of a movie.  I am so grateful.  It opens a whole new world.

  • Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

    Link does not work for
    End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
    How do we get Cisco to fix?
    see attachment

    Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
    Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

  • OTL Error - Hrs - Element link does not exist for the duration of the entry

    Hi,
    We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
    Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
    However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
    Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
    I have re-run the security list generation (we are using static list).
    The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
    The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
    We are using 11.5.10.2
    Thankss

    Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
    If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

  • Link Material Document generated for material movement due to production

    Hello Expert,
    I am creating a zreport for Material Consumption during Production. I am assuming Confirmation entry in PP module as a base of this report and linking to Material Movement data in MM Module. But I am not able to link this data from tables.
    Can you pls guide me how to link Material Document generated for material movement due to production confirmation entry and actual production confirmation entry.
    Thanks
    Shailendra

    Hi Shilendra ,
    You can create a report with the logic. That all the materials which are created due to backflushing confirmation are created with movement type 131 and the component material are consumed by movement type 261.So you can create the report with this logic.
    Dont forget to award Points if it helps.
    Lekhram

  • [svn:fx-trunk] 10866: Fix broken links in ASDoc comments for TLFTextInput. as and TextArea.as, and add OverrideBase.as to ASDoc output

    Revision: 10866
    Author:   [email protected]
    Date:     2009-10-05 08:56:44 -0700 (Mon, 05 Oct 2009)
    Log Message:
    Fix broken links in ASDoc comments for TLFTextInput.as and TextArea.as, and add OverrideBase.as to ASDoc output
    QE notes: -
    Doc notes: -
    Bugs: -
    Reviewer: -
    Tests run: - checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/states/OverrideBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/TLFTextInput.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextArea.as

    Sorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
    CSS part:
    nav p {
    font-size: 90%;
    color: #FFC;
    text-align: right;
    font-weight: bold;
    background-color: #090;
    padding-top: 5px;
    padding-right: 20px;
    padding-bottom: 5px;
    border-top-width: 2px;
    border-top-style: solid;
    border-top-color: #060;
    HTML part: (bold italic is the part I added)
    <body>
    <div class="container">
      <div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
      <header></header>
      <nav>
        <p>Home | About Us | Contact Us</p>
      </nav>
      <div class="sidebar1">
        <ul class="nav">
          <li><a href="#">Green News</a></li>
          <li><a href="#">Green Products</a></li>
          <li><a href="#">Green Events</a></li>
          <li><a href="#">Green Travel</a></li>
          <li><a href="#">Green Tips</a></li>
        </ul>

Maybe you are looking for