Link GLPCA Ref doc to BSEG (ABAP Table Logic)

Hi, We are trying to link GLPCA to BSEG via the Reference Doc No in GLPCA. This is to get the reference field in BSEG.
All seems to work well for finance documents, but when we work with GLPCA Sales Doc Types RV the REFDOC Line has the line of the sales doc and not the BSEG Finance Doc. (our Sales Doc # is the same as the invoice). So now the only way we can think of to link GLPCA to BSEG is to go to BSEG by Ref Doc No. and loop through all of the BSEG entries for the document and compare the value to get the correct BSEG line.
Can anyone think of a better way to get the BSEG Line from GLPCA when working with Sales Docs?
Thanks for any help or comments..

HI
1 ) Billing Document Number (VBRK u2013 VBELN)
2 ) Accounting document Number (BKPF u2013 BELNR)
VBRK u2013 VBELN AND BKPF u2013 XBLNR BOTH ARE SAME
Rgds
SumaMani

Similar Messages

ABAP Table - Invoice number & accounting doc date

Hi ,
In which ABAP Table i can get invoice number and Accounting document date ?
Srini

Hi Srini,
I guess what you're really asking is "How can I find the tables that contain certain fields". So, if that is really your question you should check out a blog like this;
/people/martin.english/blog/2010/01/13/finding-what-tables-and-fields-lie-behind-an-sap-transaction
Otherwise, every time you need to find a table for a field you don't know you'll have to ask the forum.
Regards,
Nick

Dynamic configuration in ABAP tables

Hi,
is there any ABAP table in XI containing the dynamic configuration's xml of a message (or an equivalent information in any format)?
Thanks,
Daniele

hi
Dynamic configurations will be a part of the xi message header
chk these tables
1.SXMSPMAST: (Integration Engine: Message Queue (Master)) The table is the master table for the monitoring information. You can get the timestamp, interface status, message id, and many more information.
2.SXMSPEMAS: (Integration Engine: Enhanced Message Queue (Master)) The table provides the namespaces, the business systems and message interfaces involved in the interface.
3.SXMSMSTATT: (Exchange Infrastructure: Message Status Description) This table provides a message status description.
4.SXMSMSTAT: (Exchange Infrastructure: Message Status) This table is helpful if you want to show the process status icon for the corresponding message state.
refer this for code sample
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
rgds
arun

Access ABAP Table using Java (NWDS/JCO)

All,
I am trying to setup a jco connection from java program through NWDS to ECC abap table.
However I am getting the following error in NWDS:
Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:\Program Files\Java\jdk1.6.0_45\bin\sapjcorfc.dll: Access is denied]. java.library.path [C:\Program Files\Java\jdk1.6.0_45\bin;.]
and a parity error on my system:
"Parity blocked an attempt by javaw.exe to run sapjcorfc.dll because the file is not approved. If you require access to this file, please contact your system administrator. Scroll down for diagnostic data."
Here is the Java code...per the SAP website:
package com.sap.pi.updateAbapSxmbAdminParams;
import com.sap.mw.jco.*;
public class ReadPiAbapTables {
private static JCO.Client theConnection;
private static IRepository theRepository;
public static void main(String[] args) {
   createConnection();
   retrieveRepository();
   try {
    JCO.Function function = getFunction("RFC_READ_TABLE");
    JCO.ParameterList listParams = function.getImportParameterList();
    listParams.setValue("BSAUTHORS", "QUERY_TABLE");
    theConnection.execute(function);
    JCO.Table tableList = function.getTableParameterList().getTable("SXMSCONFVLV");
    if (tableList.getNumRows() > 0) {
     do {
      for (JCO.FieldIterator fI = tableList.fields();
      fI.hasMoreElements();)
       JCO.Field tabField = fI.nextField();
       System.out.println(tabField.getName()
         + ":t" +
         tabField.getString());
      System.out.println("n");
     while (tableList.nextRow() == true);
   catch (Exception ex) {
    ex.printStackTrace();
private static void createConnection() {
   try {
    theConnection = JCO.createClient("aaa", "aaa", "aaa", "aa", "aa", "aa");
    theConnection.connect();
   catch (Exception ex) {
    System.out.println("Failed to connect to SAP system");
private static void retrieveRepository() {
   try {
    theRepository = new JCO.Repository("saprep", theConnection);
   catch (Exception ex)
    System.out.println("failed to retrieve repository");
public static JCO.Function getFunction(String name) {
   try {
    return theRepository.getFunctionTemplate(name.toUpperCase()).getFunction();
   catch (Exception ex) {
    ex.printStackTrace();
   return null;

Hi Vicky,
You need authorization to the S_TABU_DIS object, talk with the ABAP basis team about this to find the more restrictive role.
It's not a good idea to use the RFC_READ_TABLE, for the wide permissions needed. You could think to develop a Z RFC for this. You can check pros/cons in this document: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a83ec690-0201-0010-14ac-bd1d75e24a7d?overridelayout=t…
Regards.

InfoPackage - DataTargets - Abap Tables

Hi experts,
i have "standard" InfoPackage, I would like to obtain the informations about "Data Targets". I need to know the name of ABAP tables. where is saved this info ( "Updating the data target", "Technical name", ... )
Thanks in advance
Martin

Hi,
The info regarding Data targets will be available in the tab " Data targets".
These are the different tables related to Infopackage:
RSLDPIO Links datasource to infopackages
RSLDPIOT InfoPackage Text Description
RSLDPRULE ABAP source code for InfoPackages
RSLDPSEL Hardcoded selections in InfoPackages
RSMONICDP Contains the request-id number by data target
RSPAKPOS List of InfoPackage Groups / InfoPackages
Please refer the link for the important tables
https://wiki.sdn.sap.com/wiki/display/BI/ImportantTablesinSAPBI%28NW2004%29
Regards,
Tinkugeo

Access ABAP table in Webdynpro Java application

Hi All
Is it possible to access ABAP table in Webdynpro Java application
Please provide your input
Thanks
Karthi D.

Hi you will connect to the remote SAP system, the
backend, using an Adaptive RFC MOdel. To access database tables, you can make use of existing functions in terms of RFC function modules. For each function module you need, the system generates a corresponding Java proxy class. All the generated proxy classes and interface are bundled together in the RFC model and treated as part
of your Web Dynpro project
In WebDynpro java you RFC by using Model :
Adaptive RFC Model
1. automatically adapts to changes in function module signature
2 provides support for data types and extensibility
3.support for different structure definitions in different backend
systems (release dependent structures, custom adaptation)
Basic principles and guidelines
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
See this blog
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2brfc
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/11f1f29526944e8580c5e59333d96d/frameset.htm
Thanks,
Tulasi

How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table

Hello,
How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table ?
Thanks

hi,
Check out this link for sorting in Table.
Sorting option in WebDynPro ABAP UI Table
steps to follow :
->Have the data in internal table (itab).
->Now use sort command for the particular column which ever you want to sort.
e.g sort itab descending by <Column>.
->Now you can bind the internal table with the Context Node which is binded to Table.
I hope it helps.
Thanx.

Communication Channel information in abap tables

Hi ,
Could you let me know any abap table which contains information about communication channels in PI 7.0.
I have checked the following link
Re: XI--Table for communication channels
But the table SMPREL3 is not active in our data dictionary. is there any other table which stores this information.
My requirement is to get the list of all channels which have quality of service as EOIO in the processing tab of the comm channel.
Let me know if there are any other ways of checking this.

Hi,
Some tables in following blog:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0366444450DB00849302769976173098End?blog=/pub/wlg/2754
Regards,
Giuseppe

Load copy of abap table into PI/XI

Hi,
My scenario is as follows:
I need to make a lookup in an abap table to determine the receivers of incomming messages. Instead of making a RFC call to the SAP Backend System to request the data each time I would like to move a copy of the abap table into PI/XI.
Could anyone tell me how to do that and perhaps give me some links to relevant documentation.
Thanks.
Regards,
Morten

Hi,
>>>his is not an advisable practice to do this as it wuld increase the workload in XI. Lookup is the recommended.
My point of view is, that you should look to the bottlenecks. A lookup from each mapping could be a bottleneck as well. If you have a great number of messages, but only a small number of receivers, which neednt be updated each 5 seconds, a copy of the R/3 table could be good alternative to a lookup.
Create a change pointer at the ERP (from S11 - table maintenance generator) table and transfer the whole table (if there are not too much entries), to have a simple algorithmus and to be shure that there are no inconsistence. You can create a seconc client at PI which is receiving the message as ABAP proxy, so you have a proxy -> proxy communication (good perfromance).
Regards,
Udo

How to biod Crystal Reports based on ABAP Tables/Views

Hi,
Can any one post me some document stuff on building Crystal reports based on ABAP Tables/Views please!
Thanks,
Madhu.

Hi,
Check out the links below for Crystal Reports :
Re: Crystal report in SAP BW
http://support.businessobjects.com/documentation/product_guides/
http://help.sap.com/saphelp_nw04/helpdata/en/86/06a8d3be17fc47aa8d850e50cf5f24/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/46/dfd33b1ed4b47de10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/34/c0523e83464644e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5f72b7c0e943d99f4f5cef2bfacfe1/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/06/00a63b60f26e3be10000000a114084/frameset.htm
Hope this helps.
Cheers,
Kedar

Could you please send me the links to get an idea on Custom table controls

Hi Friends,
           I am working on custom table controls, Could you please send me any links on Custom table controls or documentation.
   Thanks and Regards,
   Sandeep Kumar Bonam

Hello Sandeep,
See here for the latest table features in 2004s.
<a href="/people/bertram.ganz/blog/2006/07/03/web-dynpro-java-foundation--whats-new-in-sap-netweaver-2004s:///people/bertram.ganz/blog/2006/07/03/web-dynpro-java-foundation--whats-new-in-sap-netweaver-2004s
This link also has a lot information on tables
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d43bb0e5-0601-0010-3a97-d9760726bf4c">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d43bb0e5-0601-0010-3a97-d9760726bf4c</a>
Regards,
Sudeep.

Open qty errin Selection list For Ref Doc. screen while converting to order

Hi SAP Gurus,
For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order.
Can you please help me?
Thanks,
Ketan

Hi Senthilkumar,
I really appreciate for your kind Hint of SEL ID.
I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
Regards,

Regarding Link to URL UI Element in a table

Hi All,
I am using "link to url" UI Element in a table column. I have mapped the column (i mean the "reference" property of "link to url" UI to a bapi node). Now, when I am populating the table, for some rows the bapi is not returning the url links. So, the column is getting disabled and not even showing the links for the rows which are getting the url link from the bapi.
Is there any way to set the mapping row wise, so that the rows which have data get enabled with the link and which do not have data will be disabled.
Also, can I make the whole table readonly, except for one column.
Please help me in this regard.
Regards,
Murthy.

Hi Armin,
Thank you very much. The problem is solved. 10 points for you.
Another Question.......
Can we make the table readonly, leaving just one column to select.(that is the column with link to url). Is it possible? If so, please tell me how....
Also, can you tell me the reason for the following exception.....
<b>com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(CreateTemplateComp.Zad_Bapi_Get_Template_Details_Input.Output.T_Template_Details): structure field Ad_Height not found
    at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
    at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
    ... 49 more</b>

Dynamic configuration- Is file name stored in any abap table in PI

Hi.
Is there any ABAP table in XI containing the dynamic configuration's xml of a message.
For any file scenario Can I get the file name from any of the abap table in PI
Regards,
Deepak

Interesting ABAP tables in XI
Interesting ABAP tables in XI Part I
Regards,
Phani

How to handle BLOB field in receiver JDBC adapter into ABAP table

Dear Experts,
I am working in a synchronous scenario with Sender ABAP Proxy to Oracle Database as receiver via SAP PO 7.4.I will be calling a stored procedure view with fields ID, NAME,Age,*** and BLOB (Image binary).
1. The response from Oracle Database field BLOB is to be stored in ABAP table.Would I have to write any JAVA program to read the BLOB or the receiver JDBC adapter will handle it and store in a table by using ABAP proxy once it reaches ECC.
2. If yes, would the JAVA program have to deal with other 4 fields.
3. Can I use a UDF mapping to this BLOB field.
Regards
Rebecca...

Dear Praveen,
Thanks for your response...
Please correct me if I am wrong.
1. For 1-1 response mapping for BLOB field, I will use just use the below UDF code.
public static byte[] hexStringToByteArray(String s) {
            int len = s.length();
            byte[] data = new byte[len / 2];
            for (int i = 0; i < len; i += 2) {
                        data[i / 2] = (byte) ((Character.digit(s.charAt(i), 16) << 4)
                                                                                     + Character.digit(s.charAt(i+1), 16));
            return data;
2. ===Using the byte data, create binary attachment in mapping for abap proxy response===
Could you please share how to create the binary attachment.. I am not clear
Regards...

Link GLPCA Ref doc to BSEG (ABAP Table Logic)

Similar Messages

Maybe you are looking for