Link Highlight Postitioning Problem

I know just enough about Flash to get me into trouble...and
here's proof.
I purchased a Flash web site template and modified it with my
images and information. (Unfortunately I do not have time to become
proficient with Flash. That's why I purchased the template.)
Everything looks good except for one thing. I have some links
at the top of the page that when you rollover them with your cursor
the highlight size is the wrong size and the active link is not in
the correct position. I'm sure this occurred when I changed the
text of the link on the template. I've tried changing what I
thought was the solution, but I think I just made it worse.
Can anyone tell me where to start?
The site is located at...
http://rls.net/photos
The links are near the top of the main page. They are titled
ARCHITECTURE, ACTION and NATURE.
The rollover highlights on the "About Me" page and "Contacts"
page also appear to have shifted to the left.
Appreciate any help you can give me.
Regards,
Randy

Hi,
You can try Ctrl + c to stop the process or try Stop + a
to get to the Ok prompt.
I encountered the same error when I installed Solaris 2.6
on a Ultra 10.
Regards
Karen

Similar Messages

Visited Link Highlight Removal

In Dreamweaver MX. I created a journal title list for my
website. I used a table to do that. For each alternate rows, I have
its background in grey. Then, I keyed in the titles and linked them
to their own websites. However, after I visited the linked sites,
the titles in the no background rows are hightlighted in grey. How
can I remove the highlights and keep the original color for the
words of the linked titles.
The browser I use is Internet Explorer 7.

Thank you very much for your reply. I tried your suggestion.
However, my Dreamweaver MX does not allow me to change in the very
page. I had to change my template which I went in and found that my
template does not indicate any visited link color. After I changed
the visited link color in my template. It came out that the color
of words I used to link the website did change; but the highlights
are still there.
In fact, this problem only happens in a table. All visited
links outside the table are normal. I visited my CSS style file. I
cannot find any item for visited link highlighted color.
Would you please help me solve the problem? Thanks.
In fact, I just want to get rid of the

Where is the link for submitting problem to apple?

Where is apple link for submitting problems?

Hi,
Was this the link your looking for
http://www.apple.com/feedback/iphone.html
Dale

Solaris 8 says: "Link down, Cable Problem?"

I have these on my home LAN:
1. Sun Ultra 5 Solaris 8
2. Win 2000 PC
3. Win NT laptop
They are all hooked into a LinkSys Router.
The Router is hooked into my Motorala Cable Modem.
Here's the problem:
The PC and the laptop can see each other on the LAN.
The Solaris 8 is only visible on the Lan INTERMITTENTLY.
The lights on the Router for the PC and laptop are always ON.
When I reboot the Solaris box, the lights on the Router sometimes come ON, and sometimes they stay OFF. When they stay OFF, I see the message: "Link down, Cable Problem?" during reboot.
I have tried different cables, and tried various combinations of the 4 avalable ports on the back of my Router.
If I plug in the Sun box DIRECTLY into my cable modem, then I don't see the above message. (but then I don't have a LAN anymore)
Please help, I've been struggling with this for a while now.
Thanks,
Irshad Ahmed (I am relatively new to Sun)

Hi
You have not indicated if you have the router ethernet ports working
at 100Mbps or 10Mbps. Depending on this sometimes, Sun systems may
not be correctly auto-negotiating their ethernet port settings.
You may set these parameters to force Sun Ultra 5 to a 100Mbps mode or a 10Mbps mode.
For forcing it to 100Mbps, Full Duplex mode and disabling the auto-negotiation, put these entries in /etc/system:
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100T4_cap=0
set hme:hme_adv_100fdx_cap=1
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10fdx_cap=0
set hme:hme_adv_10hdx_cap=0
Conversely, if you want to force your Sun to work on 10Mbps, Full
duplex mode, (if your router does not support 100Mbps) in the same
/etc/system file, put the following entries :
set hme:hme_adv_autoneg_cap=0
set hme:hme_adv_100T4_cap=0
set hme:hme_adv_100fdx_cap=0
set hme:hme_adv_100hdx_cap=0
set hme:hme_adv_10fdx_cap=1
set hme:hme_adv_10hdx_cap=0
One of these should solve your problem. You need to reboot the system
after putting these entries.
You can also check the port at the OK prompt using the command
"watch-net". This test the onboard ethernet interface.
You may also apply the hme patch released by Sun that fixes many
known problems with hme ethernet driver. The patch id is 108981-03.
It is available from the site :
http://sunsolve.sun.com
HTH
Shridhar
Sun-DTS

Hme0: Link Down - cable problem?

i've a problem i've buyed an ultra 10 (used)
i've reinstalled solaris 10 01/06
when it boot the o.s. it give this error message "hme0: Link Down - cable problem?"
and network don't work.
i cannot ping my router but i've gave to my sun an ip of the same netmask (sun ip 192.168.1.88 router ip 192.168.1.1)
i've checked the cable and it's good (it work with a normal pc)
the led on the switch is on (it's green)
maybe i need some patch
how can i do?

gio,
You didn't necesarily do anything wrong.
You do not necessarily have any broken equipment.
There may just be somthing that is incomplete in the setup.
Begin by checking if your network settings were set up correctly by running:
# ifconfig -a
(it's usually best to troubleshoot while you are root user)
If the output from the ifconfig command seem to be complete, you could always think about reconfiguring the NIC all over again.
If you are not sure, then just paste the entire output results back here.
Also, use the forum search function, using keyword sys-unconfig.
Next, read the Solaris man pages for sys-unconfig.
That command will force you to repeat the setup of the connection.

Howto Link Down-Cable problem?

Hi,
I am having a Ultra Sparc 5 with a hme interface and a quad card. When the machine boots it checks at boot prom level all 5 interface and reports for all qfe interfaces "Link Down-Cable problem?". All qfe interfaces do not have a ethernet connx but I also do not want to deinstall the quad card. Is there any possibility to turn thoose "interface checks" off.
Thanks Marcus

Never mind I just figured out that thoose checks just run after the boot cdrom command.

HT204088 I am receiving unauthorised billings for purchase from application Kingdom Age from seller Funzio, Inc . I can't find a place/link to cancel the billing neither report this problem. The link REPORT A PROBLEM only links you to Apple Store without

I am receiving unauthorised billings for purchase from application Kingdom Age from seller Funzio, Inc . I can't find a place/link to cancel the billing neither report this problem. The link REPORT A PROBLEM only links you to Apple Store without a hint/directions whre you can report the problem.
I've been surfing all parts of the website and didn.t find a manner to REPORT A PROBLEM with purchases on my behalf not authorized.

Hi..
Just to be on the safe side if you have not already changed your Apple ID password, probably should do that.
How to change your Apple ID password
And you can use the email form for contacting Apple here > Apple - Support - iTunes Store - Contact Us

I recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me! :)

i recive email from itunes to veritify my email adress and is said...''Click link below'' The problem is that i cant see the link plese help me!

Hi Maastricht2014,
Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
Hope that Helps!
~ Arpit

Encore CS4 export to Flash, link highlights not correct

Hi,
I'm building a DVD project in Encore CS4.
I have many of the links set to highlight a specific menu item upon returning to a given menu.
For example, the default button on the Main Menu is "Section 1"
However, if the user clicks on one of the "extras" listed on that main menu, "about us" for example, then when they return to the Main Menu, I want the "about us" link highlighted, indicating that's where they just came from. (instead of highlighting the default "Section 1" button)
When I test the project in Encore or burn a DVD to test it the links work/highlight as expected.
When I export to Flash and run it in the browser, the default buttons are only ever highlighted upon landing on a menu, instead of the particular ones I've specified when coming from various parts of the disc.
Is this just a limitation of the Flash export?
To specify what item I want highlighted I'm simply using the drop down menu next to the "Link:" item in the Properties panel...
I select the menu I want to link to, then from the flyout, I select one of the available buttons so it'll be the one highlighted. Is this the correct process?
Thanks.

That is the correct process, and this could very well be a limitation of the flash export. Some of the features of encore only work with DVD projects and not with Flash or Blu-ray, although this particular feature does work with Blu-ray.

Link to CSS problem (in Design View)

Hello Dreamweaver experts,
In the Design View Dreamweaver CS3 is not picking up the
styles specified in a linked stylesheet. Let me explain...
I am using an application in our office that relies upon HTML
(but does not use a standard web browser).
I need to refer to linked stylesheets using a variable like
so;
[example #1]
<link href="{FILES_DIR}/path/css/stylesheet.css"
rel="stylesheet" type="text/css" />
The use of the variable construction "{FILES_DIR}" eliminates
the need to hard code a drive letter into the link which is
preferrable. Without "{FILES_DIR}" I have to hard-code the drive
letter like so;
[example #2]
<link
href="file:///K|/additional-path-details/path/css/stylesheet.css"
rel="stylesheet" type="text/css" -->
Both examples above yield the same result in the application
(the stylesheet is found and its styles properly applied).
However, only with example #2 does Dreamweaver's "design
view" pick up and apply the stylesheet. Dreamweaver cannot find the
stylesheet or apply its styles using example #1.
My question is how can I make Dreamweaver understand and
apply what "{FILES_DIR}" means.
Any tips, tricks or pointers would be most welcome...

"horse.badorties" <[email protected]> wrote
in message
news:fh9o12$80d$[email protected]..
> Hello Dreamweaver experts,
>
> In the Design View Dreamweaver CS3 is not picking up the
styles specified
> in a
> linked stylesheet. Let me explain...
>
> I am using an application in our office that relies upon
HTML (but does
> not
> use a standard web browser).
>
> I need to refer to linked stylesheets using a variable
like so;
>
>
[example #1]
> <link href="{FILES_DIR}/path/css/stylesheet.css"
rel="stylesheet"
> type="text/css" />
>
> The use of the variable construction "{FILES_DIR}"
eliminates the need to
> hard
> code a drive letter into the link which is preferrable.
Without
> "{FILES_DIR}"
> I have to hard-code the drive letter like so;
>
>
[example #2]
> <link
href="file:///K|/additional-path-details/path/css/stylesheet.css"
> rel="stylesheet" type="text/css" -->
>
> Both examples above yield the same result in the
application (the
> stylesheet
> is found and its styles properly applied).
>
> However, only with example #2 does Dreamweaver's "design
view" pick up and
> apply the stylesheet. Dreamweaver cannot find the
stylesheet or apply its
> styles using example #1.
Did you look into "design-time" styles sheets? That may solve
your problem.
It won't take care of the path in the document though...
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
http://www.divahtml.com/products/scripts_dreamweaver_extensions.php
- divaGPS - Add "you are here" highlighting to virtually any
menu
- divaFAQ - Create FAQ pages that toggle (show/hide) the
answers
- divaPOP - Easy, clean, standards-compliant popup windows.

Web link highlighted

I am using firefox web browser in Macbook pro. When i open any email or web page i see the links appear as green highlighted, i do not like this kind of appearance. I want simple appearance such as blue color for web links or other links. Some time start of the link has right mark with filled in circle around it.
I do not know it is the trouble with web browser setting or MBP. I cannot see this kind of thing in mail application. Therefore it must be with web browser setting
Kindly help me to get rid of it

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Highlight banding problems NOT encountered in Capture One

I have noticed one issue with Lightroom since I started using it that may become a deal-breaker if I am not able to find a solution (or at least an explanation). The Issue is this:
In areas of intense, sharp highlights in my images (usually when a light source is in the frame) LR interprets these highlight areas in the Raw image much less smoothly than Capture One does. I have an example of each here (an exported JPEG that basically matches what I saw when looking at the Raw files):
Lightroom:
http://farm3.static.flickr.com/2375/1600778249_58791abf02_b.jpg
Capture One:
http://farm3.static.flickr.com/2106/1600776525_2e976c1b86_b.jpg
Notice the much better handling of the blue tonal gradations in the highlights in the upper left corner of the example from Capture One.
Is there anyone with enough knowledge of both LR and C1 to explain why the difference is so striking in the upper left corner? I've tried everything I can think of in LR (Recovery, adjusting the HSL sliders for blue and aqua, changing the contrast, exposure, etc...) and nothing works to solve the problem. Is this perhaps a color space issue? The image was shot in the sRGB color space, but the images were output in the Adobe 1998 space (this shouldn't matter and I assume the highlight problems would appear in an sRGB output as well). Or maybe it is just the way LR interprets Canon's Raw data? I find this all very confusing. Help!
Does anyone have any suggestions as to how I can get the image to look like the C1 version in LR? Or is this impossible?
The image was shot with a Canon 5D at ISO 800 without flash. I made only slight changes to the image in both LR and C1 to make the man's face less saturated. Other than that, this is the default handling of the Raw file from each program.
I'm running LR and C1 on a G5 iMac with 2GB of RAM, an ATI Radeon 9600 graphic's card, and a calibrated monitor.
Thank you to anyone who can shed some (smooth) light on this issue.

Okay, so the deal is, this area is completely blown out, even in the RAW data. You prefer the way CO handles this situation on this particular image, and I tend to agree. However, in most cases, I prefer how LR handles this by adding contrast to try to recover detail from blown areas. In this case, adding that contrast is causing a problem.
I can see no way to alter this particular image using LR/ACR to get what you want (a low-contrast diffuse transition from blown to unblown). If you have more of these, or if others have similar examples, that would be helpful.

On Ticketmaster, the page titled "Box Office" where ticket information should be provided is mostly blank and on the Error Console is "ClickTrack is not defined" with a link to the problem page.

I'm using Firefox 4.0.1 on a Dell Inspiron laptop with Vista. I've had no problems before buying tickets from Ticketmaster using the same system.

Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
Have fun

Correct linking within site problem

Hello everyone, I hope you will be able to help me or point
me in the right direction:
On the webhosting server that I am using (can't change it, my
company chose ...), there is an extremely strange linking structure
(or maybe it just seems strange to me?).
When you log-in into your account to upload your site, the
login takes you to the server/domain folder, where you simply
upload your site. Naturally, all ofther files within the "site" are
linked by /otherfile.html, because they are in the same folder.
However, the server that the hosting company is using requires the
link to be of the format /domainfolder/otherfile.html.
To illustrate it with code:
a) the way Dreamweaver sets up a link within a Dreamweaver
site relative to the index.html page:
<frame src="/IndexTop.htm" name="mainFrame"
title="mainFrame">
<frame src="/IndexBottom.htm" name="bottomFrame"
scrolling="auto" noresize>
b) the way I have to adjust the code for it to work on the
server
<frame src="/domainfolder/IndexTop.htm" name="mainFrame"
title="mainFrame">
<frame src="/domainfolder/IndexBottom.htm"
name="bottomFrame" scrolling="auto" noresize>
This means that I would have to go through every single link
that I creat in my site in wordpad after I am done in dreamweaver
and update those links.
Therefore, my question is - is there a way to automatically
add that /domainfolder/ part to every link? I was thinking that
specifying the Host directory as domainfoler would solve the
problem, but then wouldn't Dreamweaver:
1. put the index file into that directory
2. create a domainfolder directory in the host directory,
esentially causing a folder structure of the format
server/domainfolder/domainfolder (because when you log in your
files get automatically placed in your domainfolder on the server)?
Thank you very much for any help that you can offer, I
sincerely appreciate it.

You'd be ever so much better off without frames. But
<sigh> it's up to you.
Frames are rarely the optimal choice for your layout because
they bring SO
MANY problems into your life, and into the lives of your
visitors.
Anyhow - which DW are you using?
And - can you point me to any page on your site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"friikazoid" <[email protected]> wrote in
message
news:[email protected]...
> Hello everyone, I hope you will be able to help me or
point me in the
> right
> direction:
>
> On the webhosting server that I am using (can't change
it, my company
> chose
> ...), there is an extremely strange linking structure
(or maybe it just
> seems
> strange to me?).
>
> When you log-in into your account to upload your site,
the login takes you
> to
> the server/domain folder, where you simply upload your
site. Naturally,
> all
> ofther files within the "site" are linked by
/otherfile.html, because they
> are
> in the same folder. However, the server that the hosting
company is using
> requires the link to be of the format
/domainfolder/otherfile.html.
>
> To illustrate it with code:
>
> a) the way Dreamweaver sets up a link within a
Dreamweaver site relative
> to
> the index.html page:
> <frame src="/IndexTop.htm" name="mainFrame"
title="mainFrame">
> <frame src="/IndexBottom.htm" name="bottomFrame"
scrolling="auto"
> noresize>
>
> b) the way I have to adjust the code for it to work on
the server
> <frame src="/domainfolder/IndexTop.htm"
name="mainFrame"
> title="mainFrame">
> <frame src="/domainfolder/IndexBottom.htm"
name="bottomFrame"
> scrolling="auto" noresize>
>
> This means that I would have to go through every single
link that I creat
> in
> my site in wordpad after I am done in dreamweaver and
update those links.
>
> Therefore, my question is - is there a way to
automatically add that
> /domainfolder/ part to every link? I was thinking that
specifying the Host
> directory as domainfoler would solve the problem, but
then wouldn't
> Dreamweaver:
> 1. put the index file into that directory
> 2. create a domainfolder directory in the host
directory, esentially
> causing a
> folder structure of the format
server/domainfolder/domainfolder (because
> when
> you log in your files get automatically placed in your
domainfolder on the
> server)?
>
> Thank you very much for any help that you can offer, I
sincerely
> appreciate it.
>
>

Linked excel file problem - Help needed

I have 2 excel files in the same directory in Content Services. The "destination" file has a link in one of its cells to a cell in the "source" file. I want to be able to open the "destination" file and update the data if any changes have been made to the "source" file.
My problem is when I try to do this i get an error that says "This workbook contains one or more links that cannot be updated" and two options.
1) To change the source of links, or attempt to update values again, click Edit Links.
2) To open the workbook as is, click Continue.
If I click Edit Links I am then presented with a screen where I can open the "source" file. When I try to do this though I am given a login screen. Supplying a valid Content Services username and password doesn't work and I cannot open the file.
Can anyone tell me how I can open the "destination" file without having to open every "source" file? I don't want to open the "source" files because there could be dozens of "source" files for one "destination" file.

setw is the equivalent of the field width value in printf. In your code, the printf version would look like:
printf("%8s", CURSOR->name.c_str());
I much prefer printf over any I/O formatting in C++. See the printf man page for more information. I recommend using Bwana: http://www.bruji.com/bwana/
I do think it is a good idea to verify your code on the platform it will be tested against. That means Visual Studio. However, you don't want to use Visual Studio. As you have found out, it gets people into too many bad habits. Linux is much the same way. Both development platforms are designed to build anything, whether or not it is syntactically correct. Both GNU and Microsoft have a long history of changing the language standards just to suit themselves.
I don't know what level you are in the class, but I have a few tips for you. I'll phrase them so that they answers are a good exercise for the student
* Look into const-correctness.
* You don't need to compare a bool to 1. You can just use bool. Plus, any integer or pointer type has an implicit cast to bool.
* Don't reuse your CURSOR pointer as a temporary index. Create a new pointer inside the for loop.
* In C++, a struct is the same thing as a class, with all of its members public by default. You can create constructors and member functions in a struct.
* Optimize your function arguments. Pass by const reference instead of by copy. You will need to use pass by copy at a later date, but don't worry about that now.
* Look into initializer lists.
* In C++ NULL and 0 are always the same.
* Return the result of an expression instead of true or false. Technically this isn't officially Return Value Optimization, but it is a good habit.
Of course, get it running first, then make it fancy.

Link Highlight Postitioning Problem

Similar Messages

Maybe you are looking for