Link in mail is not working anymore

When there is a link in a email in the mail program it isn't working directly. Only when dragging the link to f.e. Safari it will open. What can be the solution for this problem. I already installed osx again but this doesn't work.

https://bbs.archlinux.org/viewtopic.php?id=111867
Since upgrade to 4.8 there's been quite many threads about this, but I think the above link give you answers on most questions, including trash in Thunar.

Similar Messages

  • Photo browser in Mail does not work anymore

    Since upgrading from Leopard to Mt Lion, the photo browser in Mail does not work anymore and I also cannot drag and drop photos from iPhoto into Mail. Any idea how to solve ?

    Have been working with LarryHN in an iPhoto thread. He posted this SOLUTION. Yes!!!
    Try this - Download and reapply the latest iLife support update - iLife support 9.0.3 - http://www.apple.com/downloads/macosx/apple/application_updates/ilifesupport903. html
    LN

  • So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.

    So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
    anybody can help me ?

    So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
    anybody can help me ?

  • HT6147 ios 7.0.6 exchange mail account not working anymore

    since upgrading to ios 7.0.6 my exchange mail account is not working on my ipad anymore. any suggestions? can i role back?

    Hi mattyoc,
    If you are having issues with your Exchange mail account since updating to iOS 7.0.6, you may find the following article helpful:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    - Brenden

  • Apple Mail aliases, not working anymore

    Hi,
    I have a problem since upgrading to the last update of Apple Mail 5.3.
    I'm using Apple Mail with my Gmail account; and I can't anymore use my other aliases to sending an email.
    When I use an alias, it doesn't work anymore.... The recipient see the same than the principal account.
    Gmail is not the problem, because, Thunderbird, Gmail Online Client and Sparrow works correctly.
    My configurations are the same....
    Anyone to help ??
    Thanks !!

    Acivate Secondary click in the settings (click on right side). Then use right click to enter numbers. It stop duplicating digits.
    I have the same problem and attribute it bad programming. I have installed other calc widgets and had the same problem with duplicate numeral entires when using the mouse.
    It seems like upon releasing the mouse, the calculator reads another click. If you press down on the mouse and drag off of the calculator to release it does not duplicate.
    Apple just looks dumb when programming bugs like this happen and go unaddressed. Even the track pad on my MBpro does it. I even tried another wired mouse and the problem still persists.
    Good luck

  • Mac OS X 10.8.3 Mail notification NOT WORKING ANYMORE!!!...PLZ HELP

    After upgrading my os to 10.8.3 os x, my mail notification bubbles/alerts / right sie notification menu does not work....this is highly frustrating.
    Is anyone else experiencing this problem?
    More importantly, has anyone found the solution and is so kind as to offer the steps here?
    Thanks very much

    Thanks for replying so quickly pal, but I actually seemed to have solved my own problem.
    For anyone who has been having the same issue that I did, follow these steps:
    1) go to your 'contacts' app and remove your email address from your own 'card'
    (not sure if this is necessary) 2) remove apple id from user & preference profile
    Cheers

  • Help! Mail program not working anymore!

    Hi there-
    All of the sudden my mac mail program is not working. I click on it, and it appears to launch, but then never starts up or anything, and I can't see the menu bar at the top when I click on the application icon.
    Could this be because I have too many mail messages? If so, how do I fix it???
    Help! I need my email account back!!
    Thanks.

    Hello Heidi.
    Check Multiple applications quit unexpectedly or fail to launch. Although this indicates when this occurs with multiple applications, the same troubleshooting steps apply.
    Perform the troubleshooting steps in the order provided with the exception of re-installing the Mail.app if you get that far. If the previous troubleshooting steps do not resolve it, IMO it is best to target the Mail.app preference file first and if you need the instructions for doing so, let me know.

  • (urgent) mailbfr -f   mail server not working anymore

    i ran mailbfr -f in the morning,  i found it took  like 40 hours to run and also it disable all the services. i got 1000 users using the mail server, so i searched on line it said it doesnt harm if i stop the mailbfr -f anytime i want. so i stopped it, but after that i found all users` old mails are gone. and i tried mailbfr -m username, to reconstruct the single account, it worked again, so i kept reconstructing some users but all of sudden, the mail server doesnt work any more. and i have no idea why this happen. i have to continue the mailbfr -f to finish the whole reconstruct of the database.
    i read many posts, they all say mailbfr is a good command and no harm, but it brought me big trouble. is there anyone had same problem before? anyone could help me with this? thanks so much.

    i ran mailbfr -f in the morning,  i found it took  like 40 hours to run and also it disable all the services. i got 1000 users using the mail server, so i searched on line it said it doesnt harm if i stop the mailbfr -f anytime i want. so i stopped it, but after that i found all users` old mails are gone. and i tried mailbfr -m username, to reconstruct the single account, it worked again, so i kept reconstructing some users but all of sudden, the mail server doesnt work any more. and i have no idea why this happen. i have to continue the mailbfr -f to finish the whole reconstruct of the database.
    i read many posts, they all say mailbfr is a good command and no harm, but it brought me big trouble. is there anyone had same problem before? anyone could help me with this? thanks so much.

  • Click on a mac appstore link in safari does not work anymore

    Hello,
    I'm on OSX Yosemite 10.10.1 using latest versions of Mac App Store, Safari, Iron and Firefox.
    In a recent past, in Safari, Iron or Firefox, when I clicked on "view in Mac App Store" link, the Mac App Store app opened.
    I clicked by mistake on "No" in a box.
    Now, when I click on "view in Mac App Store", nothing happens.
    Where in MacOSX or elsewhere in my Yosemite, can I get the setting to open the Mac App Store app from a browser.
    Thanks in advance.
    Regards,
    Marc.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • E-mail links in Mail are not working

    None of the links in e-mail will work. I shut down all of the add ons but that didn't work.

    I was able to fix the problem by disabling the extension 'Garmin Communicator 2.9.3' (a browser that allows communication between web sites and garmin gps devices). Sounds like there is an issue with certain extensions (since everybody who has posted so far has a variety of extensions installed) that is causing the problem.

  • Does "sysctl -w net.link.ether.bridge_ipfw=1" not work (anymore)?

    Hi,
    According to the ipfw man page I should be able to use:
         sysctl -w net.link.ether.bridge_ipfw=1
    in order to route the bridged packets to ipfw.
    When I try that on (Mountain) Lion though I get:
         net: class is not implemented
    I am missing something?
    Regards,
    Dutch

    Hmmm, looks like what I am trying to do is a dead end in OS X.
    https://discussions.apple.com/message/7724509#7724509

  • Links in Mail signature not working, please help me

    I have created the signature in preferences + added the links
    when I go to create a new message the signature is there and formatted BUT NO LINKS
    do you know why this would be happening?

    Hi There,
    By default you can’t add links but there is a trick to it that can do just that:
    Write a new email, add the urls in the new email as if its a signature.
    Then select the text that you wish for it to be a link and go to Edit then Add Link.
    Repeat that process for all your links then Copy and paste the manually created footer with links in the signature section under preferences...
    Good Luck
    Hardy

  • After 5 months now push mail is not working

    I have a nokia lumia 820 and everything works fine, but form last sunday push mail is not working anymore.
    I tried an factory reset but nothing is working. Is there somebody who knows how to fix it ?

    We are talking about an Microsoft Exchange ActiveSync (EAS) account with Direct Push enabled, don’t we? Because you cannot do much right (or wrong), have you double-checked with your mail provider?

  • Get mail button not working can not receive any mail

    Hello
    my mail stops working half way. I can sent messages but suddenly my get mail is not working anymore. not through the button and not through the mailbox menu.
    any help
    regards

    Who is your ISP, how is your mail configured - POP or IMAP and do you get any error messages and if so what are they?

  • HTML links in Vibe Feed and digest e-mails do not work on GW 8.0.3client

    I have GroupWise 8.0.3hp1 on NetWare 6.5.8 and a Vibe 3.3 install on
    SUSE 11 (the downloadable Vibe demo virtual machine from Novell's site).
    I have recently started upgrading GroupWise clients on Windows 7 PCs
    (64bit), and have been testing Vibe. I have run into a problem with
    HTML links in GW clients not working on PCs where the GW client has been
    upgraded.
    This problem occurs using the GroupWise 8.0.3hp2 and 8.0.3hp3 clients,
    but does not occur on a 8.0.2hp2 client, so it appears to be GroupWise
    client related. I haven't tested any other client versions.
    1. When using the GW 8.0.3 client, if I select any of the "Novell Vibe
    OnPrem", "Favorites", or "My Teams" folders, I can see the Vibe Feed
    display showing entries for sites I'm following. But clicking on the
    links in these entries does nothing, so I cannot use the Vibe Feed to go
    directly to files, profiles, etc. The same Vibe Feed links from the
    Vibe web browser interface or from a GW8.0.2hp2 client works fine.
    2. If I have e-mail digest notifications setup to let me know when
    changes are made to a folder or file in Vibe, the e-mails are delivered
    to me just fine. But once again, none of the links in the e-mails work
    when using the GW8.0.3 client. Clicking on them does nothing. If I
    look at the e-mail message source, I can copy-and-paste the URLs
    directly into a browser and they work fine, so the URLs themselves are
    correct. Again, these links work fine if I use the GroupWise WebAccess
    or a GW8.0.2hp2 client.
    Is the GW 8.0.3 client is blocking these HTML links? I receive no
    notification from the client asking whether to "unblock" any
    links/scripts/images when viewing messages with these Vibe links.
    Any suggestions for getting these to work on GW 8.0.3 client?
    Thanks,
    -Greg
    former e-mail for posting:
    [email protected]

    Greg,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

Maybe you are looking for