Link in PS and MM for BW

Hello Gurus,
Is there a link that can be established between PS and MM modules for BW in the datasources. For eg. if I require a report to find the material requirements and consumption status for a particular project maintained in PS.
Help is highly appreciated. Thanks in advance,
rgds
TR PRADEEP

Hello Pradeep,
I think, it is not possible to define link between two datasources in BW. But your stated reporting requirement can be furnished by using multiprovider on top of the two infoproviders (PS and MM).
Thanks and Regards,
~Ketan Patel

Similar Messages

Link between EKBE and EKET for the below scenario

Hi all
We have a requirement to display schedule line number(eket-etenr) for purchase order and for each history of quantities in table EKBE (ekbe-ebeln ,ekbe-ebelp). Please suggest how we can link these two tables,
As i need to display the eket-etenr upto the quantity confirmed on latest date..
The example is below for quantity 81.
If Purshase history is
EKET-menge EKET- etenr
81 --- 0001
5 -
0002
10 --- 0003
date move-typ EKBE-menge ***-sum ETENR
01/26/2004 101 10 10 0001
01/26/2004 101 10 20 0001
01/27/2004 101 20 40 0001
01/27/2004 101 20 60 0001
01/30/2005 101 10 70 0001
03/31/2005 101 1 71 0001
03/31/2005 101 10 81 0001
04/01/2005 101 9 90 0001
11/20/2006 102 -9 81 0001
06/04/2006 101 3 84 0002
06/05/2006 101 1 85 0002
06/06/2006 102 -1 -1 84 0002
06/07/2006 101 3 87 0003
06/08/2006 101 9 96 0003
We need to display EKET-ETENr for each ekbe entry whenever the quantity is delivered til that line.
Pleae suggest possible ways.
Regards,
Latha.

Hi,
Pls chk this relations-
EKBE-> EKKO->based on EBELN
EKKO -> EKPO based on EBELN
EKPO->EKET based on EBELN, EBELP
First try to get the Purchase order numbers into EKKO from EKBE based on this get their itmes from EKPO from this we can get the EKET values based on both documnet number and theier items.
To get the history of the PO(EBELN) check this select statement -
SELECT
     ebeln      "Purchasing Document Number
     ebelp      "Item Number of Purchasing Document
     gjahr      "Financial year
     vgabe      "Transaction/event type, purchase order
     belnr      "Number of material document
     bwart      "Movement type
     budat      "Posting date in the document
     menge      "Quantity
     wrbtr      "Amount in document currency
     waers      "Currency Key
     matnr      "Material number
     werks      "plant
     charg      "Batch
     FROM ekbe
     INTO TABLE i_ekbe
     WHERE gjahr IN s_gjahr AND
           budat IN s_budat AND
           werks = p_plant.
SORT i_ekbe BY ebeln gjahr matnr vgabe bwart.
if i_ekbe[] is not initial.
SELECT
           ebeln    "PO
           lifnr       "VENDOR
      FROM ekko
      INTO TABLE i_ekko
      FOR ALL ENTRIES IN i_ekbe
      WHERE ebeln = i_ekbe-ebeln.
endif.
SORT i_ekko BY ebeln.
if i_ekko[] is not intitial.
SELECT
            ebeln    "Purchasing Document Number
            ebelp    "Purchasing Document ITEM
            matnr    "Materail No.
            menge    "qty
            meins    "unit
              umrez    "Conversion factor                 "MOD-005
              umren    "conversion factor                 "MOD-005
        FROM ekpo
        INTO TABLE i_ekpo
             FOR ALL ENTRIES IN i_ekko
        WHERE ebeln = i_ekko-ebeln.
endif.
if i_ekpo[] is not initial.
    SELECT   *
           FROM eket
           INTO TABLE i_eket
           FOR ALL ENTRIES IN i_ekpo
           WHERE ebeln = i_ekpo-ebeln
           AND   ebelp = i_ekpo-ebelp.
endif.
Hope this solves your issue. Chanegethe WHERE conditions wherever necessarry as per your requiremnets.
Regards
Lekha

Break the link between IT0007 and IT0008 for Capacity Utilization Level

Hi Gurus!
We have a system that connects the field "Employment Percentage" from IT0007 with the "Capacity Utilization Level" from IT0008. That means that every change in the Employment Percentage changes also the percentage in the Capacity Utilization level.
Our idea is to disconnect those two fields and make them independent, because the HR Department preffer to introduce this information manually twice (once in each infotype).
Do you have any idea of how I should do that?
Thank you in advance!
Abel

I know what it means... The problem is for what they are using this infotype.
For them IT0007 has the schedule of the person, and the percentage can change (<100% means part-time employee)... but in IT0008 they WANT ALWAYS the 100%, because for them this percentage is based in how many hours of all the hours informed in IT0007 the employee worked.
In other words, if the employee has a Work Schedule Rule of 8 hours a day, but he is contracted part-time for only 4 hours a day, In the IT0007 he will be informed with an Employment percentage of 50%, but in the IT0008 he will have a Capacity Utilization Level of 100%, because he will work the 100% of the hours informed in the IT0007 (the 4 hours informed in Daily Working Hours).
I know it is a little bit confusing, but it's the way they are working now... probably in the future they will correct their processes, but now we must adapt to their requirements and work in this way.
Any Idea will be welcomed
Edited by: Abel Raya on Jan 27, 2011 11:21 AM

Linking address book and msn for mac

I've just recently got the new macbook pro, and I was wondering if there is a was I can put my contacts from address book, into msn?
matt

Probably, but first you need to export them from Address Book to a CSV file, then use the Import function of MSN Live to import them. You can get more info from their web site here.
Mulder

Link between IT0014 and IT0015

Hi,
i created one wage type in IT0015 with amount 5000$, So that 5000$ payment made to associate. Now the same i want to recovery as 500$ in 10 installments through IT0014. Can u pls help me how will create the link between IT0014 and IT0015 for the advance wage type?
Please give me the detailed information,so that i can configure in my system own.

Hi,
Please follow the below steps:
1. Copy the WT (XXX1) from MD70 as a Balance WT
2. Copy the WT (XXX2) from MD80 as a Recovery WT
3. Copy the WT (XXX3) from MD90 as a Total WT
4. Maintain the link in the table V_T51P1:
indicator 10: Recovery WT to Balance WT
Indicator 11: Balance WT to Total WT
After you Paid the Advance Just decide the installments star date and amount and then maintain
1. WT XXX2 in IT0014 with same start date (End date can be 31.12.9999) (Installment amount needs to be maintained)
2.WT XXX1 in IT0015 with same start date (One time entry only) (the Advance amount needs to be maintained)
3. WT XXX3 no need to maintain in any info type AND just you run the payroll ,system will deduct all installments until the total advance will deduct.
Please let me know if you have .........
Thanks
Cheera

Link between KONA and VBRK/VBRP and KONP and VBRK/VBRP

Hi
please suggest me the link between KONA and VBRK/VBRP and
KONP and VBRK/VBRP
I want to give link of rebate agreement and invoice no/Inv Qty
My requirement is I want a report where i can see Under one Rebate agreement ,how many Commercial Invoice use
e.g. Rebate Agreement no -125 ( for 10 Rs / unit)
I have created 10 Invoice for 10 qty each so accrual Amount is 10* 10= 100
I want such report where for agreement No 125- 10 Invoice No should be reflected.
I don't want to go into VBO2 and go to verification level that concept i know
i want one report where i will see all
Regards
Hemant

Hi
In my case i want commercial invoice no (billing type F2) but if i try to find link between KONA and VBRK for field KNUMA i can only see credit Memo No(Billing type-B3-rebate billing type) ,
I want to display commericial invoice and not rebate credit memo
Pls advice
Regards
Hemant Gaikwad

Updates and Hotfixes for DirectAccess 2012 R2 and Windows 8.1

for some of you who use DirectAccess probably familiar with the following link
Recommended hotfixes and updates for Windows Server 2012 DirectAccess
as far as I know and according to TechNet, DirectAccess hasn't change a bit from 2012 to 2012 R2 servers.
I use DirectAccess on Windows Server 2012 R2 and I'm surprised to see that there is no single update from that list the applicable with either Server 2012 R2.
if it's true - shouldn't there be a documentation that talks about the differences of the DirectAccess Client\Server from 2012\8 to 2012 R2 \ 8.1?
I'm asking because I want to make sure those updates are already include or not needed for 2012 R2\8.1 and not "forgotten" or something.
Tamir Levy

I was afraid that you'll said that
I hate to be the annoying guy but take a look at this KB article:
http://support.microsoft.com/kb/2787534
Applied to: Windows 8\2012,
Doesn't Apply to: Windows 8.1\2012 R2
and - for a fact, doesn't include in Windows 8.1\2012 R2 as this bug still exists in those operating systems.
another annoying fact - No other update was released for these version yet.
this example approves that not every hotfix \ updates that was released for 8\2012 before 8.1\2012 R2, is already included in 8.1\2012 R2
and allow me to add another fact.
when you configure DirectAccess via the remote access wizard it creates a WMI query called
DirectAccess - Laptop Only WMI Filter.
after you create it in Windows Server 2012 R2 - look at the WMI Query and you'll see that by default it doesn't apply to version 6.3! the version for Windows 8.1.
if you want to add the support for Windows 8.1 you have to modify manually the query which is of course, not supported by Microsoft.
That is just another symptom that makes me wonder if Microsoft did ANY change or update to DirectAccess 2012 R2
Tamir Levy

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

Install from scratch 3 times Mavericks but cannot used my restore it will just start for ever. After first install and restore mail and link between folder and files didn't work anymore. Now cant see my disk in finder. Help?

First install through regular update : never finishing the start after automatic restart
First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
So far no Mac since 3 days ...
Any help is welcome

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

Link between Class and characteristics created for that class

Hi All,
Is there any table that I can look at to find a link between class and the characteristics created for that class. For all the list of characteristics created I am refereing to CABN table but my requirement is to find the logic to see all the characteristics created for a class. Can anyone suggest me the right table to look at?
Regards,
Shane

Hi,
I would like to thank you for your quick response. So based on your thoughts, here is the process i followed to find the characteristics for a existing class, took the Internal class number and used the KSML table to find all the Characteristics created for that class.
To find the list of values assigned to that characteristics, used the AUSP table for that characteristics internal number.
Thank you again for your inputs
Shane.

ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
can you please help, as I also tried to re-install it but pr

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Using Reference Mode and checking for broken alias links

I use iPhoto 09 in reference mode (where it doesn't import the pictures into the library). I'm aware of the pitfalls of doing this but, long story-short, it's better for my needs this way. I just wanted to know if there's a way to tell iPhoto to check for missing photos or broken alias links. It seems to just pop-up randomly some time after moving or deleting anything and I'd rather take care of business when it's convenient for me not for iPhoto. I don't move my pictures very often but when I do I want to be able to re-link them immediately and not wait for iPhoto to randomly ask me and then I don't know what album or date the picture is from that its asking me about. Thanks in advance!

I thought you were aware of the pitfalls of running a Referenced Library One of which is that if you move the files iPhoto will lose track of them.
Unfortunately, iPhoto has no mechanism for checking the integrity of the links - another reason I would not use iPhoto in Referenced Mode.
You could try use an app like [FileBuddy|http://www.skytag.com> to check and repair broken aliases. However, if you continue to manage your files without reference to iPhoto then you will continue to have problems.
Regards
TD

I am trying to link our xbox and PC into our wireless network. I am using an apple airport express and it is asking me for a WEP Key. Where can I find my wep key?

I am tyrying to link our xbox and PC int oour wireless network. I am using an apple airport express and it is asking for my WEP Key. Where do I find it?

You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
**Edit
Airport does support the WEP protocol.
Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

[svn] 2703: Fixes for bad links in seeTag and inheritance link.

Revision: 2703
Author: [email protected]
Date: 2008-08-01 08:45:08 -0700 (Fri, 01 Aug 2008)
Log Message:
Fixes for bad links in seeTag and inheritance link.
@seeTag was causing duplicate entries for package name in the array - which was causing a bad link..
Bugs: SDK-9440, SDK-14265, SDK-12745
QA: Yes
Reviewed by: Paul
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-9440
http://bugs.adobe.com/jira/browse/SDK-14265
http://bugs.adobe.com/jira/browse/SDK-12745
Modified Paths:
flex/sdk/trunk/modules/compiler/asdoc/asDocHelper.as

Revision: 2703
Author: [email protected]
Date: 2008-08-01 08:45:08 -0700 (Fri, 01 Aug 2008)
Log Message:
Fixes for bad links in seeTag and inheritance link.
@seeTag was causing duplicate entries for package name in the array - which was causing a bad link..
Bugs: SDK-9440, SDK-14265, SDK-12745
QA: Yes
Reviewed by: Paul
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-9440
http://bugs.adobe.com/jira/browse/SDK-14265
http://bugs.adobe.com/jira/browse/SDK-12745
Modified Paths:
flex/sdk/trunk/modules/compiler/asdoc/asDocHelper.as

Link in PS and MM for BW

Similar Messages

Maybe you are looking for