Link in the video to a external site

Hello, I want to link places in the video to a external site. Does adobe have tools for this other than flash? I was hoping that PP would offer function for this....

I don't believe the video file itself can contain a link. It's usually the player that handles that type of functionality.

Similar Messages

What if I want to link to an image on an external site, such as Pixentral or Flickr, instead of uploading the image to the Forum server?

Flickr's Terms of Service state that if you post an image hosted on Flickr on another site you have to link back to the image page on Flickr. To do that you need to go to your image on Flickr, click on the All Sizes link above the image, select the size image you want, then Copy the HTML code from the first box of code underneath the image. Then, in the Forum's Rich Text Editor, click on the >> button/icon and select Insert Raw HTML. This will open a frame within your message where you paste the HTML code you copied from the Flickr site. Then continue on with composing your forum message and click “Post Message” to post the message to the forum system.
For Pixentral images, you will need to go to http://www.pixentral.com and upload your image following the instructions there. You do NOT have to check the box to make images public. Once your image is uploaded there copy the HTML code from the box below your image. Then, in the Forum's Rich Text Editor, click on the >> button/icon and select Insert Raw HTML. This wil open a frame within your message where you paste the HTML code you copied from the Pixentral site. Please note that there is an extra "/" character in the Pixentral URL that will prevent the image from showing up, so you need to make one change to the HTML that you copied from the Pixentral site. The beginning of the HTML code will look something like this:
<a href="http:www.pixentral.com/show.php?picture=16xx5748rt9fhd"/>
Please remove the slash that appears between the quotes and the greater than symbol so that this part of the HTML code looks like this:
<a href="http:www.pixentral.com/show.php?picture=16xx5748rt9fhd">
Then continue on with composing your forum message and click “Post Message” to post the message to the forum system.

@ adobe-admin (J.C.?):
Thanks for fixing the "backslash" error. Accuracy is important, and doubly so when presented as an F.A.Q.
The sad thing is how prevalent the usage of "backslash" is when a plain old slash is meant (generally, the "forward" attribute is assumed and unneeded), and by people who should know better. It's a direct result of people knowing just barely enough about the Windows file path naming protocols, and then applying the only terminology they're familiar with incorrectly to URLs.
I went about 10 rounds—TWICE!—with a labyrinthian succession of people at the Discovery & History cable TV networks because they were saying "backslash" in voice overs whenever their commercials promoted their websites. It took some doing, but I finally got in touch with somebody who was savvy enough to recognize that it was a rookie mistake made by a clueless marketing copywriter. The voice over person just read the copy they were given, oblivious to the difference. It amazes me that it wasn't caught by somebody early in the recording/production process and rectified.
They then had it correct for about a year, until new commercials started popping up with the same error. Unfortunately, the person I had talked to previously no longer worked for the History channel and I had to go through the process of finding someone who understood all over again.
Yeah, you can call me a nitpicker with nothing better to do.
But I've earned that dang badge, and I wear it proudly!

After installing 8.2 update i can't see the video on my favorite site dmax.it.why?.please help

the video is mot charging i can go on the site dmax.it but the video is not working.i tried from my ipad mini retina and iphone and the problem persists.what can i do?is there an option to enable or disable or soma app to install?

I Had this same problem but just found a fix.
1)turn off Touch ID for App Store purchases
2)turn your phone or tablet off and then power it back on
3)go into settings iTunes & App Store and then password settings and make sure you have a purchasing time option selected
4)turn on Touch ID
Touch ID should now work for App Store purchases.

I am getting a certificate error message and there is no link on the page to add this site as an exception.

I am trying to open up the web page where we log into our employee email. Evidently the security certificate has been changed. I am getting a certificate error message, but I am not seeing a link provided where I can click to add this web site as an exception.

This is a user to user forum. You are defintely in wrong place.

I need to make a menu open once the video is finished playing

I am using AS3 becase it's the only way i could figure out
how to make a video play and stop with the buttons. I am not
married to using AS3. Basically what i want to do is make a video
player that is very similar to the one used on youtube. I want a
video to play (intro video to my website) then at the end, a menu
will appear giving links to other pages and other videos. I want to
have a link on the video that will take you directly to the menu in
case you have already seen the video and just want to view links or
whatever is on the menu.
So in order: video plays upon visiting site, video ends, meny
shows up giving links
Link to skip video and go directly to the menu
link on the menu to go back to the video

It didnt work, perhaps I did something wrong...of course I
havent added the menu thing yet...it just says:
Access of undefined property VideoEvent
and then it lists this as the problem:
myVideoPlayer.addEventListener(VideoEvent.COMPLETE,doCompleteVideo);
Here is a link to my project file:
http://cid-d697031667893e80.skydrive.live.com/browse.aspx/Flash%20Project
There is a .rar and a .zip, they both contain the same stuff,
I just wanted what was convenient to you.
Here is what my vid looks like so far ( without the menu )
http://www.myspace.com/wissenshaft
I have included my code below

My home page is firefox. Today when I signed on firefox I recieved a message from my antivirus that mozilla attempted to download the following file from your site. Trojan-Downloader.JS.Iframe.cgq

When I clicked on Firefox to start and as it opened my antivirus immediately named the Trojan, keeping the Trojan from downloading to my machine. The Trojan was found within Mozilla at C:\Users\nameofmachine\APPDATA\LOCAL\MOZILLA\FIREFOX\Profiles\8m239aat.default\Cache\2\BD It appears subsequent attempts have not happened.

Thank you very much Computer Whiz. I suspected the the pop-ups should be allowed & I made saure the box was not blocking in"Tools> Unfortunately I went back to CBC Archives on line but the window had no change. There was no "pop-up" from HDS Link Detector. The video clip just played as it normally does in the "on-line" player. The HDS icon in the lower right hand corner of the window is red (meaning"enabled", so it seems the "pop0up" should appear when I go to the CBC site. Maybe it's an extra difficult video to get a pop-up? I don't know how those other guys manged to download the video using HDS Link Detector. Here is the link to the video that I've tried to capture for a year:
http://www.cbc.ca/player/Digital+Archives/CBC+Programs/Television/Tabloid/ID/1404668920/
Anyway, THANKS very much for the courtesy in trying to be so helpful. Best wishes!

Premiere Elements 11 is adding a red tint to all the video out create

I have put two clips of .mts video on my timeline. When I watch the video from the timeline, it looks great. However, when I output the video (in any format) it has an awful red tint. I've tried several output options (different version of mpg as well as different version of avchd). They all have the red tint.
Here is a link to the video. You can easily see the red tint. This is not the way the video looks from within Premiere Elements. Also, I know that Youtube is not the source of the tint, because the tint appears on all the files that I output from Premiere Elements onto my hard drive.
http://www.youtube.com/watch?v=p6zimlsmJdI&feature=youtu.be
What is causing this, and how can I prevent it?

OK. Here are some screenshots that I hope illustrate the issue I'm dealing with. This first picture shows what the video looks like on the preview screen from within PRE. The image is taken from my Acer external monitor at home. Notice the natural looking skin tones.
After creating an .mpg version of the file and saving it on my hard drive and viewing it with Windows Media Player on my Acer external monitor, this second picture shows what the image looks like. Notice the red tint on the skin.
This third picture shows the same .mpg file as it appears on the built-in screen on my laptop. Notice that the skin tones look a little more natural, but they still display some red tint. They definitely don't look as natural as the skin tone in the first picture (as the image appears from the preview screen within PRE).
A few extra notes: I realize that these images may appear differently to other viewers whose monitors will display them differently. However, I think that comparing the first image in the series with the second two will show a significant change in skin tone.
A second note: When I view the .mpg file on my ViewSonic monitor in my office, the red tint on the skin tone is almost gone.
A third note: Because the ViewSonic external monitor doesn't seem to have the red tint problem, it seems to point to a problem with my Acer external monitor. However, as the images above show, the built-in screen on my laptop also shows the red tint. But, more importantly, if the problem is with my Acer external monitor, then I don't understand why it shows such natural skin tones on the image displayed within PRE preview window.
A final note: I attached a screen clip from the image as it appeared on an .mpg file. However, the same red tint appears on several version of .mpg as well as .mp4 files that I created with PRE.
Thanks for helping me figure this out.
Danny

I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV. I have checked all connections and the video is xlnt. Have also toggled thru every possible Dolby/Audio combination in settings. Help! Any suggestions?

I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?

Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
     HDMI from the Cable Box to the Receiver
     HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
     HDMI from the Receiver to the Monitor
     RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
     S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
     S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will

HT3678 I purchased Quick time pro, went through the steps above. When I go to save the video save is grayed out and it says I need to purchase quicktime pro.

I purchased Quick time pro, went through the steps above to install.
When I go to save the video save is grayed out and it says I need to purchase quicktime pro.

Quicktime Pro will do full screen streaming videos that are compatible with Quicktime installed Codecs. If the video of the Olympics on the website has a specific URL to go straight to the video, then yes, you can call upon it with Quicktime Pro's player and then watch it fullscreen.
If the video of the Olympics was embedded such a way that you can't find the direct link to the video, then the limitation is how the webpage is designed. Thanks to Flip4Mac, there is now also a Windows Media codec you can install for Quicktime as well:
http://www.flip4mac.com/wmv_download.htm
Although some video software like Elgato's EyeTV don't work with it yet. If you are using Elgato's software, don't download it, and rather download Windows Media Player for Mac OS X:
http://tinyurl.com/26pxg
if the video is in Windows Media.
If the video is in Realplayer, click on the Realplayer Free button on the upper right corner of:
http://www.real.com/player/?src=realaudio
You can enter a dummy address and password if you don't want Real's offers.
If it is still a question of not being able to determine the true link to the video, try using different Mac web browsers to see what result you get:
http://www.macmaps.com/browser.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Why the videos load to slow?

why the videos from any web site load slow with fire fox?? and how can i fix it?
== This happened ==
Every time Firefox opened
== i update to the fire fox 3.6.3

Which security software (firewall) do you have?

I built a website with imac. When i upladed and looked at it with firefox the video i put on it jumped to the bottom of the page. I thought it was the way the page was designed but it works fine on Safari and Explorer

when you go to the my albums page the link to the video is at the bottom of the page. The link takes you to the movie page and when the page loads the video shoots to the bottom of the page

Hi Aikipappy-
Sometimes, the video or audio content in a web page cannot be properly downloaded and displayed in Firefox. A required plugin may be missing, outdated, blocked, in conflict with another plugin or extension, or the content may be blocked for some reason. This article will help you solve these problems.
[[Video or audio does not play]]
Hope that helps!

Problems posting Video into Social Network Site

Many social networking sites don't allow audios or videos to
be posted to their blog via the use of iframe. I've successfully
used the following code on a ning.com blog:
<object type="text/html" data="
http://www.deskping.com/PlayWeb.aspx?IsPlayList=False&MediaId=6c12a24d-af46-4ed5-b947-b778 53b6e3c2&width=320&height=265&playerStyle=V001&scrollingText
= " width="320" height="265"> </object>
That code will not post the video to a social site called
yuwie.com.
I've contacted Yuwie support about how to post to them. All
they say is:
"Your object type is text/html we don't show objects of that
type because you're basically trying to embed another web page into
your profile. We don't allow this for security reasons. What other
sites do is irrelevant... You can easily just embed it with the
standard flash embed code."
Can anyone give some guidance here on how to configure code
that would work in the listed social site?
Your help appreciated.
Rob

expert painter wrote:
.. So does anybody have any suggestions on how to get a video to play on a WordPress.org post
why not asking the experts at http://wordpress.org/support/ ?
your prob has little to do with 'video production on a Mac', but 'supported codecs, plugins and embedding video on wordpress.org' ..
the Search-word 'video' at the wp-support spits out some good discriptions ..

Can't see embedded youtube videos, just a blank space where the video should be

As question says embedded youtube videos do not show outside of youtube. I'm using firefox 23.01, have cleared my cookies, seen if my flashplayer is up to date etc and still no luck.
I've put up with it for a few months now but its really starting to get annoying
any help would be appreciated cheers

Hi.
I know this sounds stupidly simple - but it worked for me.
Sometimes, when you copy and paste the embed link from a YouTube video, the actual link to the video DOES NOT START WIth.....
http:
If this is not there it will fail.
For example THIS WILL NOT WORK
<pre><nowiki><iframe width="560" height="315" src="//www.youtube.com/embed/sCsjfE6Mabs" frameborder="0" allowfullscreen></iframe></nowiki></pre>
BUT THIS WILL
<pre><nowiki><iframe width="560" height="315" src="http://www.youtube.com/embed/sCsjfE6Mabs" frameborder="0" allowfullscreen></iframe></nowiki></pre>
Took me ages to figure this out.
hope it helps.

Can't see any video from Apple Web Site and some others, MacBook Air 13"

i need help, i cant see the videos on the apple website and some others. I can hear the sound of the video but the video seems all black nd i cant see it. I was watching some other videos that needed a program called DivX, i first thought it was because of that but then i unistalled it but it still doesnt work. Hope anyone can help me
Thank you

I had the same problem... very simple to solve...
With Safari open, click "SAFARI" on the top bar, scroll down and click "PREFERENCES"...
With Preferences open, mouse over to "EXTENSIONS" and click to move the slider to turn off extensions created by third-party developers...
That's all I did and when I tried to open the videos on Apple's site everything worked normally again...
Hope that helps!

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

I have not changed any of my preferences and they look like they are as I would have left them.
I tried resetting Firefox and deleting the preference file, no change.
By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.

Link in the video to a external site

Similar Messages

Maybe you are looking for