Link indicator in hierarchy node

Hi All,
I have extracted a hierarchy from ECC. I need to store a sub level of this hierarchy as a new Hierarchy. Can you please suggest me the best approach?
Also,
The linkID (Link indicator) is disabled. How can I enable this selection.
Regards,
Rajendra.

Hi,
A customer (a global retailer) wishes to create a master data repository to store information about the locations it is active at. The data includes information about states, regions, counties, and cities (for example, the state capital, county population) and specific outlets. Each outlet is associated with a geographical hierarchy (state, region, etc.) Itu2019s expected that it will be easy to search and maintain information using the MDM Data Manager, and that the repository will be designed in a way that will ensure data integrity.
The information to store includes the following objects and hierarchy:
1. States u2013 each state holds a name, postal, traditional name and capital.
2. Regions u2013 a region is associated to one state. It holds the name of the region.
3. Counties u2013 a county is associated to one region. It holds the county name, population, FIPS code, and the county code.
4. Cities u2013 a city is associated to one county. It holds the city name.
5. Outlet u2013 an outlet is associated to one city. It holds a unique identifier, a name, outlet manager name, and contact information (address and phone number.)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
Regards
Sudheer
Edited by: SUDHEER on Dec 30, 2008 9:57 AM

Similar Messages

Status & Tracking System: Link responsible person-hierarchy node

Hi experts!
Where does SAP store the link between hierarchy nodes, responsible persons and web layouts for STS? In the relevant tables for STS starting with UPS* you find only an orgvalue, which seems to be some kind of hash key, which is only used in tables which don't provide the necessary information (resp person and so on).
Any help would be greatly appreciated.
Thx Michael

Santosh ,
its necessary that you have it as text node.
but not very sure why you would want it to be other than text.
Sai Vishnubhatla

Create link or dropdown for hierarchy nodes.

Hi friends, I need your expertise in solving my senario. We have a costcenter with about 10+ hierachy levels. The customer wants to bypass the query varible screen (hierarchy node varible, year, month,mandatory) by selecting the node either from dropdown box or radio button or link from the intranet web page. This is little bit challenging for me. How can I create nodes, level by level and pass to the queryString. What is the best way to implement this.
Thanks for your help.
Ram

Moorthy -
A dropdown or radio button will work but you will need to use JavaScript to pass the hierarchy and node values and build the command through URL parameterization. First you will need to set the hierarchy, this can be done by passing a hierarchy value to a hierarchy variable using the "Set Variable Values" command. Then you can filter to a specific node using the "Set Selection State Simple" command. This link is a good place to start and get familiar with the fundamentals.
http://help.sap.com/saphelp_nw70/helpdata/en/43/ef05462480025ae10000000a1553f7/frameset.htm
A bit of advice learned the hard way. When filtering the node, you must use the "Set Selection State Simple" command and include the controlling area as part of the string.

DSO or ODS "Insert New Hierarchy Nodes" under Data Fields

When you insert info objects under the Data Fields in DSO right mouse click on the Data Fields icon and you will find Insert New Hierarchy Nodes . I created a hierarchy node with infoobjects associating with it which will be visible under the Filters Folder in BEx Query designer as a seperate folder. I can add them to the infoobjects from this folder into the query. I did not know how to apply this functionality in Queries and what it really does. My guess was you can create dynamic hierarchy using characteristic infoobjects from transactional data.Any ideas or links to documentation. This option was available from 7.X in DSO's and i think even in 3.x ODS.

Hi,
May help you:----
http://help.sap.com/saphelp_nw70/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
You could feel the flexibility of using this hierarchial display in the Query. Try to create any Query on this DSO.
Regards,
Suman

How to pass a hierarchy node variable value over OpenDocument?

Hello,
I have been unable to link to an instance with matching parameters with opendocument with hierarchy node variables.
Has anyone attempted this or been successful?
Please reference this post I had in the Web Intelligence forum. sInstance=Param not working for sap bw query based reports (FWM 02020)
Here's some background information
We've created 2 new crystal reports based of sap queries.
Report 1, single prompt, no hierarchy.
Result : Can link to specific instance with matching parameters. Great!
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters
Parameter list for report 2
[!V000001} : Cost Center/Gr{oup (Multiple) = {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
However when I go into the history and look at the successful instance parameters used, it seems to be picking up an extra parameter ( my guess is node)
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We have attempted to use the entire string, the first portion, second portion, and just the technical response. No luck.
Any help or pointers would be appreciated!
Nick

Hello Ingo,
I'll explain the situation more clearly,
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters with a response from the Bus Objects server
An error has occurred: The object with ID -1 does not exist in the CMS or you don't have the right to access it (FWM 02020)
We have 1 parameter for report 2
{!V000001} : Cost Center/Group (Multiple)
We selected a single value:
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
(The XXX, XXX, & XXX is the description)
We ran a successful instance.
However when I go into the history and look at the successful instance parameters used it displays the following:
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
An extra description seems to appear (The first XXX, XXX & XXX;) Our original selection was only {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We attempted to build variations of the open document strings
1. We tried the entire parameter response,
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
2. The first description that was not part of the original selection,
XXX, XXX & XXX
3. The technical name and description
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
4. The technical name
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE}
Please let me know if you need more details.
Regards,
Nick

Exclude a hierarchy node by using exit variable (not in query designer)

Hi gurus!!
I have a hierarchy for the infoObject 0COSTELMNT. Depending on the user who executes the report, the node '0599ADJUSTMENTS' must be displayed or not.
I am trying to solve it by using an exit variable:
Varible Type: Hierarchy Node
Processing : Exit
On the exit, I have entered the following code:
      IF ( sy-subrc = 0 ).
          l_s_range-sign = 'E' .
          l_s_range-opt = 'EQ' .
          l_s_range-low = 'AJUSTES'.
          APPEND l_s_range TO e_t_range.
     ENDIF.
But unfortunately does no work!!
Any ideas?
Thanks in advance
Regards.
Carmen Rodríguez

Hi,
Check the below link gives good knowledge on variables:
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/579b3c494d8e15e10000000a114084/content.htm
Reg
Pra

Hierarchy Node Intial load from R/3 to CRM 5.2

Hi
I have this problem when download form R/3 4.6c to CRM 5.2 hierarchy node.
Can you help me?
It's very important because we are blocked.
Thanks
Best regards.
we downloaded the following customer hierarchy:
0002189004
- 0002199004
- 0002190509
- 0002010050
using the object DNL_BUPA_KNVH.
In this way the table CRM_KNVH_TEMP has been filled correctly with all
the structure.
We executed the BPH_DNL transaction selecting only the hierarchy type
D,
and the sales org D468, distr chann 01 , divsion 99.
After saving the hierarchy we created all the hierarchy structure in
CRM but there are not any customers linked to the related hierachy node.In particular we found the followng situation:
table BUT_HIER_NODE, filled with all the hierarchy node
table BUT_HIER_NODE_D fille with all the descrption of the hiarachy
node in english language
table BUT_HIER_STRUCT filled with the structure and the link between
node
tables BUT_HIER_TREE,. BUT_HIER_TREE_d filled with all our hiearcy type
table BUT_HIER_NODE_BP empty
also:
the method "assign_bp_to_node" is only executed in the the private
method
"change_record" but it is commented in the method "create record" and
also
"build_crm_tree".
In conclusion the method "start_initial_down_load2 (executed int the
function CRM_BUHI_INITIAL_DOWNLOAD) call the method 2build_crm_tree2,
but this method never execute "assign_bp_to_node".

I have found a propoer articulation of my problem in SAP note 429423. It goes as follows:
<i>"No entry exists in one of the queues, but the status in R3AM1 remains 'Running':
In this case, probably no reply is sent to the CRM Server after the data selection in the source system.If this is the case for an adapter object but not for others, contact the respective application component which can analyze why the source system does not send a reply and correct it.
If this system response occurs for all adapter objects, create a message for component CRM-MW-ADP."</i>
However, I am unable to act on the above. Kindly suggest what exactly needs to be done as suggested in the note.

BW Hierarchy node Variable - Value help Issue in Crystal Report

Dear All,
1. We have created the BW-Query with Hierarchy node Variable .
2. On the above query we have preapred Crystal Report.
3. We have published the Crystal Report using BW Publisher ( Through Content Administrator in BW).
4. Followed the steps as below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements
Problem:
When we are accessing the Crystal Report in the InfoView BW-Hierarchy node variable is not appearing in the value help as a tree structure ( It is appearing as a list ).
Please suggest me the solution.
Thanks & Regards,
Kiran Manyam.

Classic Crystal Reports and Classic SAP connectivity questions
Classic Crystal Reports and Classic SAP connectivity questions

Use of filters and aggregations based on hierarchy nodes in an update rule

Hello,
I need to calculate some indicators from a ODS (BW 3.5) that contain raw data to another one that will contain indicators. These figures are the results of the use of filters and aggregations based on hierarchy nodes (for example: all sales accounts under a node).
In fact, this is typically a query but I want to store these figures, so I need
I understood I have to use a start routine. I never did that before.
Could you provide me with easy-to-understand-for-newbies examples of:
- filtering data based on the value of an infoobject (value must be empty, for example)
- filtering and aggregation of data based on the appartenance to hierarchy nodes (all sales figures, ....)
- aggregation of the key figures based on different characteristics after filtering of these
Well, I am asking a lot ...
Thank you very much
Thomas

Please go through the following link to learn more on aggregates:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
Also go through the very detailed documentation:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
Regards,
Mahesh

Attaching document on hierarchy nodes

Hello,
I have problems with attaching documents on hierarchy nodes. I have created a hierarchy with only postable nodes. Now it is possible to attach documents on nodes, but here I don't see any practicable option for the users to attach the document on only a node, because when they select a node and want to attach a document, in the selection of the document is this node and all nodes and leafs beneath. So the document would be shown on all nodes beneath.
Is here a good option for the users to attach documents?
I also tried to disable the resolve of hierarchy nodes as described in note 627907. Now it is no problem to attach a document on a node, but in the query the document-links aren't shown any more.
Has anybody any experience with this?
Thank you in advance for your help.
Alex

Hi,
Have you set the "Display documents for masterdata/data" in Web Application Designer?
This is a setting you make on your Table-Item.
Silje

Calculation in hierarchy nodes

BW Experts,
We have a situation where an account can appear in an account hierarchy twice (i.e. an account is assigned to 2 nodes in the hierarchy). When we run the BEx report, the subtotals for the 2 nodes which contain the account are calculated correctly, but the parent node of the 2 subtotal nodes only includes the value of the account once, and not twice. For example, assume that we have 2 accounts with the following amounts:
Account Amount
A10         100
A20         200
and a hierarchy structure with 2 subtotal nodes, one containing A10 and one containing A10 and A20. So the hierarchy looks like this:
Total
   Subtotal 1
      A10
   Subtotal 2
      A10
      A20
In BEx, the report displays the following result:
Total                      300
   Subtotal 1           100
      A10                 100
   Subtotal 2           300
      A10                 100
      A20                 200
So BEx is not adding the A10 amount in to the Total node twice, which would give an answer of 400 instead of 300.
I did read in the BW Documentation that in cases like this, BEx recognizes that there is a duplicate entry in the hierarchy and so removes it from the totalling. But in our case we do not want the amount to be removed, we want it to be counted twice.
I have tried to use the link node function, but it returns the same result.
Does anyone know how to include a leaf in multiple nodes in a hierarchy and have BEx include the key figure amount in the all higher level nodes, even if it means doubling, tripling, etc. of the key figure amount?
Thanks very much for any help.

Hi Alberto,
Would you please post the resolution of the issue with the hierarchy node calculation? I too have a simillar requirement. It would be helpful if you share the solution for tha issue that you had.
Saravana

Link Column in Hierarchy Flat file

Hi Gurus,
Good Evening.
Can anyone please let me know the significance of the Link column (in between Node name and Parent ID) while doing the flat file extraction for Hierarchy.
Warm regards,
Warnie.

Hi
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4dae0795-0501-0010-cc96-fe3a9e8959dc
A customer (a global retailer) wishes to create a master data repository to store information about the locations it is active at. The data includes information about states, regions, counties, and cities (for example, the state capital, county population) and specific outlets. Each outlet is associated with a geographical hierarchy (state, region, etc.) Itu2019s expected that it will be easy to search and maintain information using the MDM Data Manager, and that the repository will be designed in a way that will ensure data integrity.
The information to store includes the following objects and hierarchy:
1. States u2013 each state holds a name, postal, traditional name and capital.
2. Regions u2013 a region is associated to one state. It holds the name of the region.
3. Counties u2013 a county is associated to one region. It holds the county name, population, FIPS code, and the county code.
4. Cities u2013 a city is associated to one county. It holds the city name.
5. Outlet u2013 an outlet is associated to one city. It holds a unique identifier, a name, outlet manager name, and contact information (address and phone number.)
Hope it is clear and helpful

Process to change the order of the hierarchy nodes

Hi,
What is the process to change the order of the hierarchy nodes ( and associated attributes) through import manager? any pdf's or doc's regarding this?

In Import Manager it is not possible to change the order of hierarchy nodes or the order of the linked attributes.
Regards,
Ronen

Restrciting the hierarchy nodes in the transformations

Hi
I have "0ACCOUNT' InfoObject in ODS and it's hierarchy.
And it(0ACCOUNT) has some accounts(4001, 4002, 4003) and other reamining other fileds values .
I want to restrict the '0ACCOUNT' values for some hierarchy nodes . How can i do this one in transformations .
pls let me knpw
kumar

Hi kumar,
use this link
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a563fe09411d2acb90000e829fbfe/content.htm
with hopes,
Raja singh

Using a hierarchy node variable in a BI 7 web template

Hi all,
I am searching for a way how to use a hierarchy node variable in a BI 7 web template. I have seen that there is a hierarchy web item, but I can only link that to a characteristic. I need to link the navigation item to a hierarchy node variable as I want to use the chosen variable value in a customer exit as well. Therefore the hierarchy web item is not working for me.
Is there any web item that can be used to offer hierarchy node variables as navigation options in a web template?
If you have any idea, every hint is highly appreciated!
Cheers
Tatjana

The Filter panel will only display you the characteristics and key figures available in the query.
If you want to add a combo box to make "on the fly" currency conversion, you'll have to do that by another way.

Link indicator in hierarchy node

Similar Messages

Maybe you are looking for