Link iview - organise entries

Hello,
I have created a km link iview and it's working fine. However I need to remove the 'organize entries' option that appears on it. I know the option to remove is in the layout set but I can't find it when I open the set ! Any clues please.
Cheers,
Phil.

Hi Phil,
Try to restrict permissions for the "EveryOne" group. Just give the "EveryOne"group only Read permissions to the KM folder where your Links are stored.
hope this helps,
harman

Similar Messages

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

How to display related links iview in content area?

Hi,
I have created Related links, but they are opening in a separate windows even though I have set the attribute of the iviews to "open in portal content area".
Please let me know how I can display the iviews of the Related links in the content area.
-Ashwini.

Hello Ashwini,
I don't think you have changed the property at the right place.
Open the iview for which related link is added. Now from the drop down box at the top right select Related Link. The related link editor will open which will show the related link iview. Select the iview and click the EDIT button at the bottom. The related link iview will open. Now Change the "Launch in new WIndow" property.
When you add an iview as reletd link to some other iview, a delta link is created and added to the iview.
This will solve ur problem.
Regards
Deb

Create a document link iview

Hello,
Can anybody please tell me about how to create a km document 'link' iview ?
I mean i want to create a document iview that can be link to a url, but this is not a url iview.
In this case, i will create a document iview that show a .jpg file, and it will open a certain url if we clicked.
Regards, and Thanks in advance
Lusi

Ok Roy, I see. Thanks for ur reply.
I think there is a simple way to do it, just like create a standart document iview, without any effort in it source.
Or anybody could tell me the simple one to do this ?
Thanks and Regards,
Lusi

Linking iViews

I know this is probably a stupid question, but for some reason it's stumping me. I have a par project and have created multiple portal components inside it. The pages are simple and I just want to hyperlink navigate between the pages with as little scripting/coding as possible. Can someone tell me the easiest way to do this?
I have created iviews for all of the various components and have tried linking straight to the iview using ?NavigationTarget=portal_content/<foldername>/<role>/<iview> but that doesn't give the behavior I need as I just want simple navigation inside of a single project.
Edited by: Michael Nicholls on Mar 12, 2009 5:45 PM

Hi Toby,
1) Try to implemnt the concept Workset mapping iview. This might be a similar thing to your requirement.
2) Otherwise, is it not possible for you to create a Webdynpro Java iViews? Because, most of the times you just Drag and Drop instead of coding in webdynpro java. For linking iviews you can use the out-bound and in-bound plugs and link the plugs with Navigation link. I hope this helps you. Let me know if you have any issues.
Regards,
Gopal.

How to find the Delta Linked iView's Origin ?

Hello all,
How r u ?
We found some new Delta Linked iViews in the Workset, but these iViews are not available in the Portal Content under the mentioned Folder. How do we find the origin of that iView ?
Best Regards....
Sankar Kumar
+91 98403 47141

Hi Maran,
Please follow these,
Content Admin -> Open your Workset.
Now your workset will display names of the iView that assiged to that workset.
If the iview is copied without delta link means that will mentioned as<b> (changed)</b> near by the iView Name.
   Example: Content Admin -> Open your Workset Object
         <MyWorkSet>
> MyiView1
> MyiView2(changed)    [This means this iView copied w.o Deltalink)
> MyiView3
Here MyiView1,MyiView3 are deltalinked iViews.
Regards,
<b>Ramganesan K</b>

Link iView Name to URL property in EP5 SP6

Hi All,
I am having a problem with the Link iView Name to URL property in EP5 SP6. In our portal all the iviews are having help links added to the title of the iview using the "Link iView Name to URL" property. The iview is a Standard.URLComponent which has a link to a webdynpro component. This url link works in EP5 SP4 environment but its not working in the EP5 SP6 environment. It works for all other iviews in both environments.
Can anybody tell me why this is happening or it does not work for an iview pointing to a webdynpro component?
Thanks in advance.
Regards
Prakash

Hi all,
I found there have a object URICodec with method encodePath in library com.sapportals.wcm.util.uri.URICodec which can do what I needed.

Link between Service Entry Sheet and Material Document

Hi
I am busy with developing a report where i am required to find the link between the Material Document and Service Entry Sheet.
I am aware that on the Purchase Order Data tab of the Material Document has the service entry sheet number and line item. However the problem I have picked up here is in the event I create a Service Entry Sheet with a service in line 1 and for some reason Delete that Line and then capture the service again, it is saved in table ESLL as line 2. This is correct. However when I have a look at the material document, it references it as line 1 of the service entry. Is there any way to get this in sync?
Thanks
Vinesh

Thanks
This table does show the service entry sheet number and line item however the line item does not correspond with the line item on the service entry sheet.
Eg.
I create a service entry sheet where I capture a service in line 1.
I delete Line 1
I recapture on line 2.
Post Service Entry
The Material Doc reference document is the service entry however the line item for the reference is 1.
I need to try and link the line items
Thanks
Vinesh

Translation of standard SAP iviews such as the related links iviews

Hi,
does anyone know how to translate he default iviews such as the related links, dynamic navigation, drag 'n relate targets? These iviews do not exist in the PCD. They are available only in the Inner Page on the Default Framework Page as a copy of the com.sap.portal.navigation.targets (Drag 'n Relate) iview.
But I cannot translate the text "Related Links" using the Content Translation or via the PCD. Where are these translations stored and how do I change them?
Marcel

Hello,
You can connect sap to .net using .net libraries.
Kind regards
Ash Thomas
Sap Consultant
<a href=http://www.ashpeople.com>Ash People, Sap Consultants & Sap Consultancy</a>
<a href=http://www.ashpeople.com>www.ashpeople.com</a>

Linking iview to iview

Hi
We have three iviews we have the requirement to link those iviews
1) We have a button in one iview. after clicking that iview a Bex Report will appear which is created through BW Report iView.
2) and we are chaching the user information in other iview after the BW Report iView is peformed
Now we want to link three iViews one after the other
Can any one can help me in which way can we perfom this links. And Secondly how to capture the data of the user in ivew, are there any API's to perform the link between the iview's

Hi Samik,
I know u tried to explain ur situation but itz not clear(atleast to me).
Iam sure u have no problems in opening a new window with BEx report upon clicking the button.
You can use EPCF's Databag API to store information and read it later(Sort of cache/cookie).
If u can, try explaning more with an example..Hope it helps.
Plz don forget points if it helped.
Regards,
P.

Adding a "forward to friend" link on blog entries?

I've setup a blog for myself using iWeb '08. Is it possible to add a link that readers can use to forward my blog entries to their friends?
Ideally, this feature would forward both my blog entry and a link back to my site, which is similar to the forwarding feature on the nytimes.com website.

I've discovered that feedburner has a service called feedflare that will insert "Email Article" links into your blog. It seems to be what I'm looking for, but I can't make it work. I'd be quite grateful to anyone who can point me in the right direction.
I'm supposed to enter in the following code into every blog entry:
<script src="http://feeds.feedburner.com/~s/myfeeduri?
spaceUrl=http://feeds.feedburner.com/~s/myfeeduri?i=POST-URL-HERE" type="text/javascript" charset="utf-8"></script>
I tried doing this and replaced "myfeeduri" with "mydomain". I am also supposed to replace "POST-URL-HERE" with "your blog’s template tags to dynamically insert the URL of the current post. " What would that tag be for an iWeb created blog?
I pasted the code into iWeb using the HTML snippet function thinking that the links would at least show up when I published to my site (even though they wouldn't be working) but there was nothing there.
Many thanks to anyone who can help me out with this one.

How to Create a hyper link iview in portal

Hi Guys,
Can any one help us to create hyper link url iviews ( I want to open a iview when click on the link of another iview )
Thanks in advance

Hi,
Its very easy.
Step1) Go to content admin -> pcd content -> Create a folder in pcd content.
In that folder create an iview. you will get so many iview templates -> select your desired template iview.
(If you still confused, search in the sdn for creating an iview in pcd content).
After creating that iview, open the same iview as object. check the quick link property. intially it will be blank. set the quick link property as iview1(as an example).
Step2) go to content admin->km content and to go to ur desired folder, say documents.
Create a folder abc and inthat create an external link iview1. give the url as /irj/portal/iview1.
Step3) create a KM Navigational iview(iview2) and open as object. set the property 'path to document' as /documents/abc.
Preview that iview2 . you will get an hyper link iview1. on clickink that iview1 details will display.
Search in the SDN for creating KM navigational iview or any other iview.
Hope that helps.
Raghu

Iview Km, Entry Points.

Hi,
I've created a Iview type Km Entry Points. I've my Desktop and my theme. When I show the Km Iview into the standard theme, the iview show Ok but when i show de Iview into my theme, the text into the iview is very small, if i show another iview, the text show ok. Why the Km Iview Entry Points shows different into my theme and into standard theme?
Thanks.

Hi Guillermo ,
Try checking this in some other theme also , i pressume for KM iviews it refers to some other Css files .Just create a theme out of standard theme , dnt change anything and assign the new theme to the portal desktop .
Check what is the impact on this .
Thanks
Pankaj

Link in JTable entries

Hi,
I have coded a very basic table (JTable) that shows some rows.
Each row contains Employee# which I want to show as a "Link" which should be underlined and if it is clicked, a Window should be popped up showing more details of the entry.
How to make Employee# values underlined as links and how to capture Click event in the table?
Any help is appreciated.
Thanks in advance....
Rajeev.

This may be good enough for your purposes:
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#selection

Address Book...LINKS between Contacts Entries

I'm not sure if this is a question or a suggestion, but I'd sure like to link contact names together and then leap from from one entry to another .
There's an entry field for "related names." Is there a way link those names to their own
entry cards?

<http://support.apple.com/kb/HT3677>

Link iview - organise entries

Similar Messages

Maybe you are looking for