Link Multiple AAF files (used to work in cs6)

Hi,
On importing multiple AAF files it used to be possible to link all aaf files at once...
Now the import function only links "one original files folder" a time.
This means I have to locate every AAF (with different original files folder) manually
All files to be re linked are in the same folder...
Am I overlooking something.
I would like to downgrade to cc 6.? but i can't find a download link?
Thank you
Regards
Hans

I'm not sure I understand. Did you move the files from their original locations into a single folder? Are you trying to relink files that have already been imported into a project? Or are you trying to import files for the first time?
Here's the download link for CS6: Download CS6 products
Cheers,
Jeff

Similar Messages

Link multiple XML files stored in oracle database

Link multiple XML files
Can any one give some code example regarding my issue:
If I have for example file1.xml stored in one relational table and another file2.xml stored in another table ….etc
And I want to put link and reference which will make me able to link these files and make query or insert…etc
May be I need to use Xlink, Xpoiner or Xinclude . But if this is the solution to this problem please can you give a simple example that will help to understand the solution especially that I want to develop my project in oracle and I will register xml schema to insert the xml files in the database
Thanks lots and I am waiting for your solution

no answer for my question
is this thread is a write place or I have to move my query to another part of the forum
thanks

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Export to PDF - Can a single report (rpt file) create multiple PDF files using the export command?

Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?

Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha

Can I link multiple project files together?

I'd like to link multiple project files together so that they will play one after another. Can you do that in Captivate?

Hey Leslie,
Yes, you can create several projects in Captivate and publish them as Flash (SWF) format. There is an aggregator project in Captivate where in you can combine all these published projects (SWF) into a single output.
Do you have any other requirement as well?
Thanks,
Anjaneai

Open multiple pdf files using Acrobat Reader?

Can we open and switch between multiple pdf files using Acrobat Reader?

Of course, but if it's Reader X or later each file will appear in its own window. This can't be changed.

IS THERE ANY WAY TO EMBED LINKS INTO THE FILE YOU ARE WORKING ON?

IS THERE ANY WAY TO EMBED LINKS INTO THE FILE YOU ARE WORKING ON?

Ha! Perfectly classic case of XY problem! Pointed out by Jongware in some other thread recently - couldn't find an exact link right now...
In short:
    User wants to do X.
    User doesn't know how to do X, but thinks he can fumble his way to a solution if he can just manage to do Y.
    User doesn't know how to do Y either.
    User asks for help with Y.
    Others try to help user with Y, but are confused because Y seems like a strange problem to want to solve.
    After much interaction and wasted time, it finally becomes clear that the user really wants help with X, and that Y wasn't even a suitable solution for X.
Maybe it worth to add to a list of tips and best practices of the forum:
Avoid XY problem!

How can I re-link multiple "missing" files from my iTunes without doing each one manually?

All of a sudden, hundreds of my songs can't be played because iTunes can't find the files. They are all still on my computer and I can link each of them manually, but that would take days! Is there a way to re-link multiple files at once?

Something must have been done to break the link. Did you manually move files or folders, rename files or folders, or otherwise change where iTunes thinks the files are located? Did iTunes crash at some point?
I haven't seen any truly successful tools to re-link tracks. You can check on Dougscripts website where there's one that uses Spotlight. There's also one that tries to re-link based upon your file being in a logical folder structure.
You could re-link by adding the files again. Of course they will be added as brand new files and not in playlists, and won't have ratings, etc. You can then use one of Dougscripts to automatically remove dead links.

How to create multiple output files using TrAX?

I am new in this field. I'm trying to create multiple xml output files using TrAX. I have to parse a xml source file and output it to multiple xml files. My problem is that it only creates one output file and puts all the parsed data there. When i use saxon and run xsl and xml files, it works fine and creates multiple files...it has something to do with my java code...Any help is greatly appreciated.
Here's my XSL file
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.1"
<xsl:template match="data_order">
<data_order>
     <xsl:copy-of select="contact_address"/>
     <xsl:copy-of select="shipping_address"/>
     <xsl:apply-templates select="ds"/>
</data_order>
</xsl:template>
<xsl:template match="ds">
<xsl:variable name="file" select="concat('order', position(),'.xml')"/>
<order number="{position()}" href="{$file}"/>
<xsl:document href="{$file}">
<xsl:copy-of select="."/>
</xsl:document>
</xsl:template>
</xsl:stylesheet>
xml source file
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE operation SYSTEM 'data_order.dtd'>
<data_order job_id='00-00-000' origin='PM-ESIP'>
     <contact_address>
          <first_name>ssssss</first_name>
          <last_name>sssss></last_name>
          <phone>2323232</phone>
          <email>dfdfdsaf</email>
     </contact_address>
     <ds ds_short_name ='mif13tbs'>
          <output>
               <media_format>neither</media_format>
               <media_type>FTP</media_type>
               <output_format>GIF</output_format>
          </output>
     </ds>
          <ds ds_short_name ='mif15tbs'>
          <output>
               <media_format>neither</media_format>
               <media_type>FTP</media_type>
               <output_format>GIF</output_format>
          </output>
     </ds>
</data_order>
My java file
import javax.xml.transform.*;
import javax.xml.transform.stream.*;
import java.io.*;
public class FileTransform {
public static void main(String[] args)
throws Exception {
File source = new File(args[0]);
File style = new File(args[1]);
File out = new File(args[2]);
TransformerFactory factory = TransformerFactory.newInstance();
Transformer t = factory.newTransformer(new StreamSource(style));
t.transform(new StreamSource(source), new StreamResult(out));

Saxon has specific extensions. In this case it is <xsl:document>. That looks like a standard XSLT element, but it actually isn't. The history behind it is this: There was a proposal to create a new version of XSLT, called XSLT 1.1. One of the new features of this version was to be this xsl:document element. The author of the Saxon product, Michael Kay, is one of the people on the W3C committee directing the evolution of XSLT, so he upgraded his product to implement XSLT 1.1. But then the committee decided to drop XSLT 1.1 as a recommendation. So that left Saxon in the strange position of implementing a non-existent extension to XSLT.
The other outcome of this process was that XSLT (1.0) does not have a way of producing more than one output file from an input file. And so the short answer to your question is "Trax can't do that." However, XSLT 2.0 will be able to do that, although it is not yet a formal W3C recommendation, and when it does become one it will take a while before there are good implementations of it. (I predict that Saxon will be the first good implementation.)
One of the problems with XML and XSLT is that what you knew a year ago is probably obsolete now, because of all the evolution going on. So being new in the field is not a disadvantage, unless you get stung by reading obsolete tutorials or magazine articles.

Link to a file doesn't work anymore

I repeteadly made this experience: I link some text to a file and upload it via .mac. However, when I change the file, the link doesn't work anymore. Even if I set up the whole thing again and upload it, it doesn't work.
Seems like I get one chance per link and that's it.
Does anyone know how to get the link working again?
Message was edited by: Christian Stahl

I just started using iWeb last night for the first time and ran into the same (or similar) problem. I did it kind of backwards but that shouldn't matter I wouldn't think. I also came across another problem with text which was not supposed to be a hyperlink but ended up being one and one I couldn't turn off.
I created a text field, typed in some text, then made the text an active hyperlink and attached the link to a file. That first one worked OK. Then I copied and pasted that text field about ten times, changed the text slightly and set each text field to another different file link. I then published and tried the links using Safari. The first few links worked fine and the files were automatically downloaded to my downloads folder. However, clicking on the last few links downloaded files from the other previous text links instead of the ones they were supposed to even though the inspector shows the correct files. I even tried doing new text fields and new links but they still don't work correctly.
The other problem is that I created some more text fields to be used as descriptions for the file downloads by copying a hyperlinked text field. I realized after the copies were made and I had spent some time changing the text that these text fields carried over the linked hypertext attribute. Since I didn't want to type everything out again from scratch, I just turned off the hypertext link attribute in the inspector. However, after I saved the web site and then published the site, I discovered that the text was still linked to a file download. I went back into iWeb and that hypertext checkbox was now checked. I turned it off several times but every time I publish, it turns it back on by itself.
I am going to create the entire page over again from scratch and try the method of dragging files from the finder to initially create the link (got that from the help file).
Also it would be nice to have better/more file download features in iWeb such as being able to access a file picker where the web user could select files s/he wanted to download instead of requiring one button per file. Also, some way to automatically compress into one download a selection of several files.
-R

How to read data from analog input and export it to a file using Components Works

I've made a simple application (Delphi 5 using the activeX) that read data from analog input channel 0. After I read the data, I want to export it to a file using the Components Works on a 6035E NIDAQ. (I'm not using labview and don't want to use it)
How can I do that???
Regards,
Francis

Here's a sample code to do this...
P.S.: If you read only one channel this code won't work.
function MyFunction: Integer;
var
Low, High, i, j, ChannelCount, RowCount: Integer;
Po: P;
begin
//you are reading multiple channel
ChannelCount := VarArrayHighBound(Buffer, 1);
RowCount := VarArrayHighBound(Buffer, 2);
for i := 0 to ChannelCount do begin
for j := 0 to RowCount do begin
WriteToDisk(Buffer[i, j]));
end;
end;
end;

Create- combine multiple pdf files has stopped working? Adobe Acrobat Pro on Mac

Hi It's my first time on this forum. I'm a regular user of the create pdf by combining multiple pdfs. It always works no questions asked, but just a few days ago when I'd click on create and select Combine files into a single pdf nothing happens. Usually a pop up would let me identify the files to combine.
Any help would be appreciated.
Thanks

Hi Anne,
If all you need to do is combine the PDFs, and Acrobat continues to give you problems, you can have a go at the free program PDF Split and Merge. You will need Java installed on your computer to run it (Java apps run on all systems -- Mac, Windows and Linux, and mobile systems like Android and iOS). Acrobat hangs for me sometimes when trying to combine multiple PDFs, especially if the individual PDFs are of considerable file size. PDF "Sam" works fine for me when Acrobat won't. It also uses less memory and resources than mighty Acrobat, on my RAM-challenged (Windows) machine. As stated above, PDF Sam is a Java program, so it should work also on Mac. There are also system-specific downloads available on the author's web page.
Have a look-see at PDF Split and Merge at pdfsam.org/download (Go to "Other Platforms and Versions" to find the Mac-specific version).
Download Java (if it's not installed!) at java.com (Go to java.com/download/manual.jsp and scroll down for Mac OS X). *Java 7 requires at least Mac OS 10.7.3 to install; check "About This Mac" at Apple menu -> About This Mac... to see your system version.
Good luck

How to create list items with multiple attachment files using rest api javascript

In one of user form I am using javascript rest api to create a list item with multiple attachment files. So far I am able to create list item and once created uploading an attachment file. But this is two step process first create an item and then upload
a file.
It create an additional version of the item which is not desired. Also I am not able find a way to attach multiple files in a go. Following is the code I am using.
createitem.executeAsync({
url: "/_api/web/lists/GetByTitle('UserForm')/items(1)/AttachmentFiles/add(FileName='" + aFile.name + "')",
method: "POST",
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
binaryStringRequestBody: true,
body: fileContent,
success: fnsuccess,
error: fnerror
So somehow I need to combine item attributes along with attachment files in body: param. I visited https://msdn.microsoft.com/en-us/library/office/dn531433.aspx#bk_ListItem but no success.
Appreciate any help.

Thanks Mahesh for the reply and post you share it was useful.
But this does not solve the core of the issue. You are uploading attachments after creation of item and multiple files are being attached in loop. This is kind of iterative update to an existing item with attachments. This will end up creating multiple versions.
What I am trying to achieve is to create an item along with multiple attachments in a go. No item updates further to attach a file.
Please suggest how this can be done in one go. SharePoint does it when one creates an item with multiple attachment.
Thanks for your reply.

Soundtrack Pro making a LOT of files - used to working in Logic, need help

So I'm used to working with Logic Studio/7.2/etc, and it's my first foray into working with Soundtrack Pro at work. My questions are this: When I use the razorblade tool (since I can't find an equivalent to the split tool in logic) in soundtrack to cut up a sequence, it seems to be creating a LOT of extra files:
http://www.1217design.com/pics/stp_question.png is an example of what I mean. Is this supposed to happen? The recorded files themselves were done in FCP and sent to Soundtrack Pro via the Send to STP Multitrack session function.
What I'm trying to find out is: Is this supposed to be happening? How can I stop this from happening? Are all of these extra files necessary in order to export the final project? And what will happen if I delete them?
I just want to know because the folder is now 4.71gb for a 30 second audio file (the final aif export is roughly 30mb), and there's over 200 of these extra files that have been created in the process of working on this project.
If this is what is necessary to work in Final Cut then I won't be able to work with FCP due to size issues (which is a shame as I feel so much more comfortable working within that environment than I do working in FCP).
Thanks for the help in advance,
Sean

Sean A wrote:
By doing this, will it still create all of those extra files? That's what I'm trying to figure out. Is it just from the blade tool being used?
For all edits, yeah, baby, STP will generate more files than cows create methane.
First, I know what works for me, but I'm still learning, so I strongly encourage you to keep a COMPLETE BACKUP of all projects until you know your workflow. Also, you may have Preferences set up differently than I do, so you may not find the same paths as what I describe here.
When you have an audio file the way you want it, and you're confident that you won't need those edit files again (be SURE) Process > Flatten All Actions (or Audible Actions) and Save that audio file. Then -- as I understand it so far -- you can safely trash all the edits related to that file. (If you use Photoshop or similar visual programs, it's the same idea.)
During my first few weeks of intensive STP work, my drive grew more and more sluggish, for no reasons known to me. I saw disk space shrinking rapidly. Finally I figured it had to have something to do with STP, so I started searching and eventually I found my edits piling up in home/Documents/Soundtrack Pro Documents, especially (for me) in Edited Media. Since they all came from projects I'd finished and exported to AAC and MP3, I was comfortable trashing them all. Suddenly, whoa, I had an extra 12 GB of disk space available.
Just keep those edit files until you are CERTAIN that you know what you're doing and that you're DONE. Otherwise, when some project needs one precious little 3MB turn of a phrase, you may find yourself confronting suicidal or homicidal tendencies.
I welcome further clarification and/or correction from people who know more and can explain it better.
Best,
chuck

Creating IPA file with Multiple SWF files using ADT

Iam successfully able to create ipa files using the ADT package but my next requirement is to create an IPA file with multiple swf files.I think it might be easy if your SWF files are regular the tough part is my swf file has lot of action script in it so the only option is to through the command prompt and using the ADT package of Adobe AIR.So now i have 10 SWF files like this and iam creating ipa file for each swf seperatly but now I want to put all of the swf files into one ipa file.Please let me know if i was not clear in my description

I think you are trying to explain how to load two swf's one with action
script and loading an other swf file which should be non action script.If
you read my requirement carefully.I have all the same type of swf's and
these swf are automatically created as a form of output for xcelsius dash
board software.Iam capable of creating individialu ipa files from these swf
files.So when I try to combine the same kind of swf files the first error
its giving is the file name which I have used in the xml.in the main file
name for the swf file its not considering the two swf file name in the
initial window.so the adt package in the command line is not understanding
the file name from the xml and the command prompt and giving error this swf
file does not exist.So please consider how to combine two swf files with AS3
into one ipa file.These swf files are not editable,Let me know if you find
any idea to achieve this

Link Multiple AAF files (used to work in cs6)

Similar Messages

Maybe you are looking for