Link not Reachable in Etester

Hi
When i playback a script with "test the frame" as enabled, one of my pages fail and when i get to the frame properties for the reason, it shows as "Link Not Reachable". What is the property that the tool is checking here that is the failing?
Thanks in advance
Subu

Gramps,
I'm relatively new to web development and I'm afraid I don't understand what static address I'm supposed to change. I tried substituting the http://www.externalsite.com with clickLink() but that resulted in a "page not found" message. I don't understand what "http://www.externalsite.com" represents since there is a different address for each logo. Could you please be more specific?
Thanks for your help.

Similar Messages

Status Agent Not Reachable - How to set a fix port number?

My EM 10g was working fine http://localhost:5500/em
Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
I had even installed another DB called REPOS other than the default ORCL.
All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
Thanks in advance.

Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
I did not uninstall the db.
Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
Everything is on my local machine.
Following is from the portlist
Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (orcl) = 5500
Enterprise Manager Agent Port (orcl) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Enterprise Manager Console HTTP Port (ORCL) = 5502
Enterprise Manager Agent Port (ORCL) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831

Node Manager Not Reachable

Hi Everyone,
I'm very new to WebLogic, so I apologize if this is a dumb question.
I'm trying to install WebLogic as server for OBIEE. My environment is pretty simple. I have two Oracle Red Hat Linux 32-bit physical machines, let's call them WLS_SERVER and OBIEE_SERVER. I installed OBIEE on the OBIEE_SERVER and tested it using the out of the box OC4J container and that worked fine.
Then I installed WebLogic 11g on the WLS_SERVER machine and I ran the config.sh script. I used the configuration GUI to register the two physical machines and an additional server object called BIServer. Out of the box, web logic comes with AdminServer server object. I heard it's a bad practice to deploy applications to the AdminServer, hence why I created the BIServer object. I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."
How do I setup a Node Manager on the OBIEE_SERVER? Do I also need to physical put the WebLogic install file on the OBIEE_SERVER box and also run the installer there? Or there a copy paste thing I do? What am I missing here?
I appreciate the help!
-Joe

I'm trying to install WebLogic as server for OBIEEI have not heard about OBIEE, but if your aim is to use weblogic as a server for hosting this then you definitely need to install weblogic on the physical box where OBIEE will be hosted.
I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."Again not sure what is BIServer but I think you are missing a number of steps here. If you are trying to run BIServer
on weblogic you definitely need to install WLS on this physical machine [OBIEE_SERVER]. You will then need to configure a node manager on OBIEE_SERVER machine to enable it to start remotely from the admin machine.
Link for Node Manager. Since you are in Linux you can try setting up script based node manager.
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/server_start/nodemgr.html#wp1099239

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Adobe Edge links not working

Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
The hosts file is in /private/etc/hosts and can be accessed through the terminal:
sudo nano /private/etc/hosts
If you see a bunch of adobe servers in there, that is your problem.

IOS Remote Desktop App resolves hostname but throws Host is not reachable error.

Hello,
I am trying to use the Remote Desktop app on my iPad running iOS 7.0.2 to connect to a server through our Juniper VPN. When I type the hostname or IP address I get an error that say "Host is not reachable". If I connect through my Mac I have no
problem when on the same VPN. I have looked through all of the setting in Junos Pulse and it is setup to route all traffic through the VPN, and I do not know of anything that would be blocking it on the network end.
Edit: I am connecting to a Windows Server 2008 R2 box with RDP turned on with all types of connections.
Here is the log data for my latest attempt.
[2013-Nov-19 11:23:42] RDP (0): *** Application lauched ***
[2013-Nov-19 11:23:43] RDP (0): Application became foreground application
[2013-Nov-19 11:24:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2013-Nov-19 11:24:30] RDP (0): client version: 8.0.24094 on iPad3,4 (iPhone OS 7.0.3)
[2013-Nov-19 11:24:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:30] RDP (0): Showing credentials dialog
[2013-Nov-19 11:24:49] RDP (0): Final rdp configuration used: {
    activeUsername = "DOMAIN\\UserName";
    arcTimeout = 1800;
    cacheId = BEBD1725D63BB841;
    configurationVersion = 8;
    console = 0;
    host = "server.mysite.com";
    label = "Server";
    mouseMode = "-1";
    port = 3389;
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    kCFProxyTypeKey = kCFProxyTypeNone;
[2013-Nov-19 11:24:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): lo0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2013-Nov-19 11:24:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): en0 af=30 (AF_INET6) addr=fe80::66:9d3c:3d77:5cce%en0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=2 (AF_INET) addr=192.168.114.44 netmask=255.255.252.0
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=30 (AF_INET6) addr=fe80::3c11:d7ff:feb2:7a82%awdl0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en2 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=2 (AF_INET) addr=10.100.01.01 netmask=255.255.255.255
[2013-Nov-19 11:24:49] RDP (0): --- END INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): Not using any proxy
[2013-Nov-19 11:24:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:49] RDP (0): Resolved 'server.mysite.com' to '10.100.01.01' using NameResolveMethod_Unknown(0)
[2013-Nov-19 11:25:09] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/cftcpendpoint.cpp' at line 242
    User Message : Host is not reachable
[2013-Nov-19 11:25:09] RDP (0): Error message: Host is not reachable(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2013-Nov-19 11:25:09] RDP (0): ------ END ACTIVE CONNECTION ------
Cameron

Hi,
According to the log, your iPad tried to connect the remote server with IP address 10.100.01.01/32. Please check if it is the correct IP address of the server.
Also, please make sure that your iPad can connect to your VPN network successfully and get a valid IP address so that it can remote your internal server.
Thanks.
Jeremy Wu
TechNet Community Support

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

How can I get the link not to override my style sheet formatting?

I have an html page with text that has a style sheet applied
to it. When I insert a link into parts of the formatted text, the
style sheet formatting is lost in the linked text (the text for
mylars, shapes and number shapes becomes smaller: see code below).
How can I get the link not to override my style sheet
formatting?
Here is the html code I am referring to:
<span class="bodyheader20pt">Fall into winter's biggest
celebration with our New Year's Day <a href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&sc=184&PageNumbe r=1"
style="text-decoration:none">mylars</a>, <a href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=184&PageNumbe r=1"
style="text-decoration:none">shapes</a>, and 2-0-0-9 <a
href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=166&PageNumbe r=1"
style="text-decoration:none">number
shapes</a>.</span>
I am using Dreaweaver CS3 on a Mac running OSX
10.4.11.

Show us this rule --> bodyheader20pt?
Also, having this in your three anchor tags -
style="text-decoration:none" -
will prevent your anchors from displaying any stylesheet
style for
text-decoration.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ellfwar" <[email protected]> wrote in
message
news:geqiph$foq$[email protected]..
>I have an html page with text that has a style sheet
applied to it. When I
> insert a link into parts of the formatted text, the
style sheet formatting
> is
> lost in the linked text (the text for mylars, shapes and
number shapes
> becomes
> smaller: see code below).
>
> How can I get the link not to override my style sheet
formatting?
>
> Here is the html code I am referring to:
> <span class="bodyheader20pt">Fall into winter's
biggest celebration with
> our
> New Year's Day <a
> href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&
> sc=184&PageNumber=1"
style="text-decoration:none">mylars</a>, <a
> href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
> sc=184&PageNumber=1"
style="text-decoration:none">shapes</a>, and 2-0-0-9
> <a
> href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
> sc=166&PageNumber=1"
style="text-decoration:none">number
> shapes</a>.</span>
>
> I am using Dreaweaver CS3 on a Mac running OSX 10.4.11.
>

The system is not reachable, the login data could not be considered

Hello
I'm trying to connect via Hana Studio to a Hana One instance I have configured in AWS, following the guides & videos in the Hana Academy.
When adding the system in Hana studio, I get an error message after inputting the SYSTEM password:
The system is not reachable, the login data could not be considered
I've seen another post in the forum where the user solved the issue by resetting the SYSTEM password to a password without special characters, but mine is already "special character" free.
Are there others who have had difficulties when adding a new system?
Regards
Yann

Hi Swapan,
Thank you for your attention and message.
I downloaded the SAP HANA Studio from "Get your own SAP HANA, developer edition on Amazon Web Services (http://scn.sap.com/docs/DOC-28294)", specifically at SAP HANA Studio, developer edition and SAP HANA Client, developer edition, for Windows XP 32-bit. Is this HANA One? How to know the version of HANA server? How to make my Internet or firewall allow me to go out to the JDBC port? I am just learning to deal with these computer-science issues.
Regards,
Beiwei
Date: Wed, 4 Sep 2013 20:52:41 -0700
From: [email protected]
To: [email protected]
Subject: Re: - The system is not reachable, the login data could not be considered
                                                                                SAP HANA
    The system is not reachable, the login data could not be considered
    created by Swapan Saha in SAP HANA One Platform on AWS - View the full discussion
Hi Beiwei,
I suppose you are using HANA One (which you can only launch today from AWS Marketplace and HANA costs 99 cents/hr). If it is HANA One, which version of HANA One you are using? Please make sure you are using the same version of HANA Studio with HANA Server? Instance number in HANA One is 00.
If you HANA One, by default, it will open all the necessary ports. Please make sure you are Internet or your firewall allow you to go out to the JDBC port. If not, you cannot connect your studio behind your firewall with HANA server in the cloud.
Thanks,
Swapan
     Reply to this message by replying to this email -or- go to the message on SAP HANA
     Start a new discussion in SAP HANA One Platform on AWS by email or at SAP HANA

Officejet Pro X476dw MFP not reachable

Hi,
out of the blue my Officejet Pro X476dw MFP turned 'not reachable' from my MacBook. Device is still connected to my Wifi network, no changes there since last use. I can print ok from my iPhone. I turned the device off and on again - no success. I turned the MacBook off and on again - same. I reconfiguered Wifi connection at device - same. I deleted printer from MacBook and tried to re-add but installation program couldn't find device. I tried to connect manually using IP address that was shown on device - 'device not reachable'.
I am running out of ideas, appreciate any help!
Thank you!
Maik.

@weirdharrell
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Photosmart C4385 "Device Not Reachable"

I know this has been addressed in other threads, but none of the solutions have worked for me and my configuration is a little different. So here goes:
I'm running OS 10.6 Snow Leopard with my C4385. My computer is connected to a wireless network via an extender. I don't know anything about the router other than it's probably a Cisco since that's in the network name. The router and extender are both in my landlord's house, so I don't have access to them to reboot, check settings, or anything. Until this morning my printer was associated with the main network, which worked fine, but the signal is very weak and I would rather have it associated with the extender network. I went through the HP Setup Assistant and now all I get is the "Device Not Reachable" error message, whether I use the extender or main network.
I printed a Network Configuration Page and typed the printer's IP into my browser, and it shows up just fine, saying it's connected to the main network. Print & Fax under System Preferences disagrees and I can't print at all anymore (except with the USB cable). The only thing I changed recently is switching to a manual IP address for my laptop since I had lots of connectivity issues with automatic IPs, but after that everything worked until this morning when I ran Setup Assistant.
Sorry for writing a novel. I wish I had more information about the hardware but my landlord's not very helpful with these sorts of things. Any advice would be great! I've tried scrubbing software and reinstalling it and resetting the printing system, with no luck.

I see a couple of potential problems, here.
First, adding the printer by IP is dicey. If the router changes the printer's IP (actually WHEN it does, because eventually it will), then your Mac may lose track of it. Plus, adding by IP usually only enables printing, not scanning.
Second, HP printers don't seem to play well with wifi extenders. Is there a way to move your printer so that it is connected to the main router, not the extender?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Fresh Install HCM 9.1 but Links not working. Help please

Dear All,
I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
I downloaded all software from eDelivery.
HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
First Try:
Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
Second Try:
Installed Virtual Box.
Installed Windows 2008 R2 and applied the SP1.
Installed everything all over again.
Ensured the PTWEBSERVER password similar the username.
Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
Tried to login again, no error message and everything looks fine but... links not working.
Logs also looks normal to me.
Does anyone ever encountered similar issues before?
Does this is a normal behaviour before tools patch 85211 being applied ?
Thanks,
aLuNa
My APPSRV Log:
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

alunwawa wrote:
Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
Nicolas.
PS: @Jim, thanks for the kind words.
My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

CUE Website not reachable

Hello,
we've configured a UC560 with Cisco Standards. So the CUE has the IP-adress 10.1.10.1 (Gateway .2).
The CUE successfully answer a ping ! The CCA CUE diagnostics ended successful.
I also can connect to CUE through CLI of the UC560.
BUT : The Webinterface of the CUE does not answer. The webiste ist not reachable.
Here the http config of the UC560 :
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/GUI
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services
http://10.1.10.1/voiceview/common/login.do
url authentication
http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
and the telephony part :
telephony-service
video
fxo hook-flash
max-ephones 138
max-dn 600
ip source-address 10.1.1.1 port 2000
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
system message Cisco Small Business
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
cnf-file perphone
user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
network-locale U4
load 7941 SCCP41.9-1-1SR1S
load 7941GE SCCP41.9-1-1SR1S
load 7961 SCCP41.9-1-1SR1S
load 7961GE SCCP41.9-1-1SR1S
load 521G-524G cp524g-8-1-17
time-zone 23
time-format 24
date-format dd-mm-yy
dialplan-pattern 1 5909.. extension-length 2
keepalive 30 auxiliary 4
voicemail 39
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:/media/music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern .T
transfer-pattern 0.T
transfer-pattern 6.. blind
secondary-dialtone 0
Can the problem be based on corrupt http CUE files or the wrong version ? Which files are required ?
May the Firewall ACLs block this traffic ? But ping works !
Please help !
Greets
Huck

That usually happens when your PC is using a default gatway that doesn't know about CUE address subnet.
So you have to fix your routing.

ISE NODE NOT REACHABLE when building distributed deployment

I am trying to build a distributed deployment with the following personas:
2 policy admin nodes
2 monitoring nodes
4 policy service nodes
This was a project that was partially implemented but never in production. It was in a distributed deployment, but half the nodes were no longer working (http errors or devices weren't reachable or could not sync). I decided to start from scratch. All nodes were:
-de-registered
-application was reset to factory defaults on all nodes
-upgraded all 8 nodes to 1.1.4.218 patch 1
-installed all new certs and joined all nodes to the domain
-added to DNS forward and reverse lookup zones
When I make 1 admin node primary and register the other nodes (secondary admin, monitoring, policy services) the nodes successfully register and show up in the deployment window of the primary; however, all the nodes show as NODE NOT REACHABLE. After registration, I've noticed that the registered nodes are still showing as STANDALONE if I access the GUI. I've tried rebooting them manually after registration and they are still unreachable. I have also tried resetting the database user password from the CLI on both admin nodes and the results are always the same.

Originally I had added them all at the same time. I thought that maybe I just wasn't waiting long enough for the sync. I waited an entire day and all the nodes were still unreachable. At this point, I've de-registered all the nodes, rebooted all the nodes, converted the primary back to standalone (the remaining nodes never converted from standalone to distributed even when I rebooted them after registering despite a message that they were successfully registered), converted one node back to primary and tried to register just the secondary admin node giving it plenty of time to sync; this node is still not reachable from the primary.
I've quadruple checked the certificates on all the nodes, these certs were all added on the same day (just last week) and the default self-signed certs were removed.
I had restored from a backup on the primary so I might just rest the config on that node and try joining the other nodes before I restore again.

ISE 1.1.3.124 secondary node not reachable after registration

G'day All,
I'm constantly seeing that the sync and replication status for my secondary admin/monitor node in the primary node as node not reachable. The secondary still thinks it is in standalone mode. When I run the ISE diag tool connectivity tests I am able successfully ping the devices from each other using both hostname and ip and the nslookup also works fine between both nodes. Ping and nslookups also work from different networks within the environment. The two nodes are in the same vlan on a 6500 vss pair but on different switches of the pair. I'm new to ISE so any help is greatly appreciated.
Thanks All.
JS
Sent from Cisco Technical Support iPhone App

Hi Saurav,
Thanks for your prompt repsonse...
I have worked through that section of the document. The registration completes successfully, I've got NTP sync on both nodes and the system time on both nodes is identical.
I am only using the self signed certificates, but following the user guide instructions I have imported the secondary's cert into the primary node.
Just as of about 30 minutes ago, I saw an alarm on the Secondary ISE node stating that a Slow or Stuck Replication has been detected...
As I said in the original post, I can ping the fqdn's from each other so it appears that the DNS requirements have been satisfied.
I've changed the admin account password, I am certain that the ISE DB passwords are correct and the same on both nodes and the timezones for both nodes is the same also....
It looks to me that registration is fine, but the first full replication isn't completing successfully
Thanks,
JS

Link not Reachable in Etester

Similar Messages

Maybe you are looking for