Link of FI Postings and CO Postings
Hello experts!
I have got a question:
How are FI and CO documents linked clearly?
In the CO-table COBK is an entry in the field REFBN, which contains the FI document number. So, in my opinion, there should be a 1 to 1-link between FI-Document number and CO-Document number, linked via this field.
Is it possible that the relationship of this field is not always clear and therefore a clear assignment is not possible? In this case, are there any other clear connections between FI documents and CO documents. My target is to link FI documents with CO documents without any unsharpness.
Thanks for your comments!
RoBr
I think a sure-fire way to link the FI doc with the CO doc is the combination of the four key fields in BKPF table (MANDT, BUKRS, BELNR, GJAHR) and the fields MANDT, REFBK, REFBN, REFGJ in table COBK, in the same order.
Similar Messages
-
Collapsible Panels - Links to open one, and close others
Hi,
I am new to Dreamweaver and have been creating my site by
learning as I go along. I have already read through all the other
related topics associated with Collapsible Panels on this blog and
have still not found an answer. I have been able to open and close
Collapsible Panels by using links - but unfortunately, I need more
than just opening and closing.
On my site i have approximately 5 pages, all with the same
header and Menu bar. The Information (that i have presented in
numerous Collapsible Panels) does however vary from page to page.
What I need to try and figure out is:
How can I open one collapsible panel and close all others? I
have seen the one example which leads to my next question:
How can I group Panels? Some examples of how to open one and
close all others use this grouping. Is there any other way of
opening one and closing all others without grouping?
Lastly, is it possible to set up a link that can be viewed on
one page which when clicked opens the relevant page and collapsible
panel? i.e. on my About Us page there is a link (using the Menu
bar) for one of my several services on the services drop down menu
(but services is on a different page with the same setup). When a
viewer clicks on the specific service, is it possible to get the
site to open the services page, and open the relevant collapsible
panel (with all other Panels closed)?
Any assistance would be greatly appreciated - I have been
searching for days now and cannot seem to find any
answers/directions in laymans terms.
Kind regards,
Johnwlsjoh013 wrote:
> Hi,
>
> I am new to Dreamweaver and have been creating my site
by learning as I go
> along. I have already read through all the other related
topics associated
> with Collapsible Panels on this blog and have still not
found an answer. I
> have been able to open and close Collapsible Panels by
using links - but
> unfortunately, I need more than just opening and
closing.
>
> On my site i have approximately 5 pages, all with the
same header and Menu
> bar. The Information (that i have presented in numerous
Collapsible Panels)
> does however vary from page to page. What I need to try
and figure out is:
>
> How can I open one collapsible panel and close all
others? I have seen the one
> example which leads to my next question:
This page has an example that has a link that can open and
close a panel:
http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/collapsible_panel_sample. htm
One way to do this would be to have a single link that would
open one of your panels using the code, but then add to it code
that closes each of the other panels, for example:
<a href="#"
onclick="CollapsiblePanel4.open();CollapsiblePanel5.close();CollapsiblePanel6.close();">O pen
4, close 5 and 6</a>
To make this work, you'll need to look that the panel
constructors at the bottom of your page and make sure to match up
the panel variable names i.e. "var CollapsiblePanel1 =...." the
variable is CollapsiblePanel1.
You could also write a function that gathers together the
various panels you have on the page and then pass to it only the
panel that you want kept open. For now, though, it might be best to
use the above method, given your expertise. And taking that even
further, you could apply the function call unobtrusively. Both the
function call and the unobtrusive part you can work on later to get
this working for now.
> How can I group Panels? Some examples of how to open one
and close all others
> use this grouping. Is there any other way of opening one
and closing all
> others without grouping?
This is a little confusing, on one hand you ask about how to
group, but then ask how not to group. There is a concept of a
collapsible panel group:
http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html
But there is another type of group, that may be more what
you're looking for, and that's an Accordion panel, which is similar
to the collapsible panel group, with the exception that it can only
have one panel open at a time.
> Lastly, is it possible to set up a link that can be
viewed on one page which
> when clicked opens the relevant page and collapsible
panel? i.e. on my About Us
> page there is a link (using the Menu bar) for one of my
several services on the
> services drop down menu (but services is on a different
page with the same
> setup). When a viewer clicks on the specific service, is
it possible to get
> the site to open the services page, and open the
relevant collapsible panel
> (with all other Panels closed)?
Probably the easiest way to do this particular one would be
to make sure that you have all of the panels set to be closed when
the page loads, and then take a look at the code for the last
example on this page:
http://labs.adobe.com/technologies/spry/samples/utils/URLUtilsSample.html
That example uses a tabbed panel, but the concept is the
same, use a URL parameter to determine what to show. You'll need to
link in the SpryURLUtils file in the Spry download package (look in
the includes folder):
http://labs.adobe.com/technologies/spry/home.html
Essentially, your link will look similar to:
sample.html?panel=1
Then your code could look something like:
var params = Spry.Utils.getLocationParamsAsObject();
var CollapsiblePanel1 = new
Spry.Widget.CollapsiblePanel("CollapsiblePanel1",
{contentIsOpen:(params.panel==1 )} );
var CollapsiblePanel2 = new
Spry.Widget.CollapsiblePanel("CollapsiblePanel2",
{contentIsOpen:(params.panel==2 )} );
Basically what this is doing is creating an object from the
URL parameters. Then for each of the panels the constructor has
code that determines whether or not to expand the panel when the
page loads. So it checks the value of params.panel to see if it
matches 1 (for the first one), if it does, then that means that
contentIsOpen is set to true, if it is some other number or is not
present at all, then that means that the panel is closed. This
would then be repeated down the line for how ever many panels you
want to operate like that.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
Adding link to the photo and Name in the outlook contact card -Enterprise wide
How can I make the name and photo in the outlook contact card link to my profile page? I read articles where it is mentoined that the URL is set in Registry, currently my organization does not have any link associated with photo and name in contact card.
I want to implement this across the organization , any deployment or changes that I need to do to implement this across?
Appreciate if you can provide details on how this is done. The url will look like this:
https://www.produrl.com/userid={userid}
How can I dynamically add respective userid in the link?Appreciate your response on this.So you want to redesign the contact card in Outlook? Are you using SharePoint? If signed into sharepoint via the social connect, there is a link to the mysharepoint page under View source. I don't think you can change the link or customize the card,
beyond what is listed here:
http://technet.microsoft.com/en-us/library/ff631135(v=office.15).aspx#BKMK_ContactCards
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter -
An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?
For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions. -
Can't Find ODBC drivers to link MS Access 2013 and MySQL
Can't Find ODBC drivers to link MS Access 2013 and MySQL.
Is one available?
Thanks,
LarryCould to associate the problem at Office 2013?
I just installed the ODBC Driver; The data source machine was available; When selected I had received the message. When it was selected I had received the message:
"ODBC -- falha na chamada.
[Microsoft][ODBC Driver Manager] O DSN especificado contém uma incompatibilidade de arquiteturas entre o Driver e o Aplicativo (#0)"
In english, could to say: "ODBC -- fail on call.
... The specified DSN contains a architectural incompatibility between Driver and App (#0)"
I don't know yet the reason for this. Anyone knows? -
I downloaded a movie from itunes on my ipad. In the downloaded area where the movie should be, I only get a link to "iItunes Terms and Conditions", no movie. There is nowhere to accept the terms and condotions.
Nevermind, the movie was there in the Videos app, not itunes downloads. Thanks.
-
I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get my music and don't even see available downloads in the iTunes Store
Check this link, http://www.apple.com/support/itunes/ and go to the contact page.
Sorry, here you go https://ssl.apple.com/emea/support/itunes/contact.html
Message was edited by: ChrisJ4203 -
How can i create link between ipad(xcode) and webserver?
Hi, I'm a new to iPad development and i need help,
i'm not good with english but i try to explain my question:
how can i create link between ipad(xcode) and webserver?
(the webserver ".NET" with driver odbc is connected with DB Oracle)
so, how can my ipad application access to the Oracle DB?
Create a webservice (.NET) to be place between iPad and DB, is this correct?
how can i do it?
which are libraries to include in the xcode's framework?
thxI think the following URL will be your best answer:
http://stackoverflow.com/questions/3510468/connecting-iphone-to-an-odbc-database -
Click on link in one portlet and open in another portlet
how do you click on link in one portlet and open in another portlet?
Hrmm... This is a IBM Question..
Officially this is a meaningless buzzword promoted by IBM. Portals are some sort of Servlet but IBM incapable of explaining how they differ from ordinary Servlets. Some speculate they are used to present a webpage with many services on it such as a search engine, and news that come from diverse sources. The user is able to dynamically configure the contents and layout of the page much like Netscape home pages
I don't understand what yhour asking..
I am assuming you want to call another servlet (portlet)? That would be absurd to do .. You let the HTTP request and XML file to deal with the response of the portlet -
Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Link between Schedule lines and delivery quantity
Hi all,
At the item level in a sales order, can anyone tell me the link between schedule line data and delivered quantity.
Schedule line data can be found in VBEP and delivery qty can be found in LIPS. But I want the link between the two. For which partcular date in the schedule line item the delivery qty is displayed.
Thanks in advance.Hi Amol and Rahul,
Actually I dont want the link between sale order and delivery, I want the link between schedule line dates and delivery qty.
Hope I am clear.
Thanks in advance.
Edited by: Rajini R M on Sep 11, 2008 6:12 AM -
Is there any link between movement types and documents
hi
is there any link between sales doc and movement types ?
is it the only source dependig on schedule line movement type will determined?
if with out order we are doing delivery how system will determine movement type
Thanks in advanceHi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM -
Link between Inbound Delivery and Sales Order for Third Party
Greetings Gurus,
My client is using a third party business model in a retail setting that fulfills sales order via purchase req --> PO --> Inbound delivery with GR posting --> customer billing document created through batch based on the delviery quantity ('G' in item billing relavence) --> vendor invoice reciept happens subsquently.
My question is this, is there an inexpensive (performance wise) way to link the customer billing and the inbound delivery?
Since the inbound is not in the doc flow i don't think VBFA will suffice. I think the best route would be via schedule line back up, but i have yet to find a link.
There are process implications for this link for reporting and customer service which are a critical to the business. Point will be rewarded for sound advice.
Thanks for your help.Hi Daneil,
Through the document flow VBFA you can capture the PO number and the link for what you have asked can be found from table EKBE. check out for field BELNR.
regards
prasad -
Link Between Service Notification and Sales Order
Hi All,
In our business process, we will create sales order from Service Notification and we can see the same in the Document flow. But when i check in the VBFA table, there are no entries. I would like to know how the document flow is updated without updating the VBFA Table or is there any other table gets updated for this flow.
Please guide me.
With Regards
Vinu.NHello Vinu
For one Sales Order # figures in Notification header table- VIQMEL-VBELN.
Similarly Notification # figures in Sales Order Header table- VBAK-QMNUM
That is a solid link right there.
I Also guess technical objects like Equipment, Serial number also form link between the Sales and Service Documents.
Also check out the logic in document flow program RIBELF20, may be it will give you the clues to the problem.
Hope this helps. -
Link between process order and sales order for planning strategy 52
Hello,
I investigate the possibility of a link between "sales order" and "planned order / process order" for the usage of planning strategy 52 (planning w/o final assembly, make to stock).
I know, this is not conform to the basics of planning strategies (EITHER make to order OR make to stock) and I suspect it would be a modification. Of course we have the alternative "make to order" - strategy 50, but we do not want to use individual customer stocks.
Is anybody there with similar customer requirements or project experiences?
Thanks in advance,
Joerg
Message was edited by:
Jörg DemtschukHi Jorg,
To my understanding if you need hard pegging then in SAP only Individual requirement is possible.
Or else you need to create a custom transactions/table to identify Sale order and when ever a process order is created by selecting the sale order record, the process order detials should also get updated against that.
You need to take the help of ABAP expert for this,
Regards,
Prasobh
Reward points if this was useful -
Crystal report link between sales order and picklist
Hi,
Good day!
I am making a picklist document using crysal report. My requirement is to show the sales order number, cardcode, cardname, itemcode, released qty in the picklist. the tables i linked in crystal are the ff:
RDR1.DocEntry linked to ORDR.DocEntry and ORDR.DocNum linked to PKL1.OrderEntry.
I have a sales order with 2 items and then I processed picklist for it. When I run the report, my problem is that it shows the items twice.
Scenario:
Sales Order 1:
Item A 2
Item B 1
When I run the report, it's like this:
Item A 2
Item A 1
Item B 2
Item B 1
I'd already tried adjusting the links but still can't get it.
Please help me.
Thanks so much.
SIncerely,
JackilouHi,
could you please describe how you solve this issue?
Thank you very much!
Regards,
Tobias
Maybe you are looking for
-
I am able to make it to the site for about 2 seconds and then I am quickly logged off and the statement, "There is a problem with your authentication, possibly due to inactivity. For your safety, you have been logged out and must sign in again to con
-
Drop shadow on font in pie charts
I cannot figure out how to remove the drop shadow on the font in pie charts. It looks ok if I have the font remain in white, but if I change the font to black, it looks really fuzzy. No, the shadow box is not checked. Yes, I have checked out the text
-
Failed to run the action: Install Software Updates. CI Version Info timed out?
Hi, I have a task sequence that runs on servers to automatically install the advertised updates in software center. I have one server that is not installing these updates and from the smsts log I see an error about "CI Version times out" Does anyone
-
Logic songs won't open or are corrupted - FW 400 - 800 problem!
Been having all sorts of problems not being able to open songs, or they say they are damaged and when I repair them they're empty. Worked out, through trial and error, it had to be a hard drive problem, then realised I'd just changed the cable on the
-
My ipod kicks me out of almost every app i own how do i fix it?
I use an old iphone for my ipod. Almost every app i own kicks me out when it is loading something. Is there any way to fix this?