Link of ISOs for ESXi 5.0 update 2

Hello Folks,
I am not able to find this particular ESXi iso image on Cisco or Vmware Websites.
ESXi 5.0 update 2.
Can someone help with the link or details .

Deepak,
From Padma's link, I found 5.0 U1, and found U2 here:
https://my.vmware.com/web/vmware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere_hypervisor_esxi/5_0#product_downloads
I want to say, that U2 is not the customized image though
-Kenny

Similar Messages

Vsphere/ESXi 5.0 update 2 iso for Cisco Blade and Rackmount Servers.

Hello Team,
Can someone provide me details of Vsphere/ESXi 5.0 update 2 iso for Cisco Blade and Rackmount Servers.
I tried to find it on both Cisco and Vmware websites but without success.
It would be good if you can please share the links.
Regards
Deepak Jha
+91-9873005405

Deepak,
From Padma's link, I found 5.0 U1, and found U2 here:
https://my.vmware.com/web/vmware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere_hypervisor_esxi/5_0#product_downloads
I want to say, that U2 is not the customized image though
-Kenny

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models

What is the latest version and updates available of Firefox for Mac system 10.3.9? Can you provide a link of this for downloading.

What is the latest version and updates available of Firefox for Mac system 10.3.9? Can you provide a link of this for downloading. I am currently using Firefox 2.0.0.20 but need to upgrade to use Bell.net email.
== URL of affected sites ==
http://

Firefox 2.0.0.20 is the last version that works on OS X 10.3.9
You may want to consider using another browser if 2.0.0.20 does not work for your email. You could try using Safari for your email. If that does not work or prefer an alternative, a couple of options are [http://www.icab.de/dl.php iCab 4.8] or [http://www.opera.com/download/?os=mac&ver=9.64&local=y Opera 9.64] (Opera 10 does not work on OS X 10.3.9)

Where i can get a Cisco VMware Vsphere ESXi 4.1 update 1 installable media

Hi All,
can someone from cisco tell me how to get cisco vmware vsphere ESXi 4.1 update 1 that was certified by Cisco ?
because the last release from the vmware website still 4.1 without update 1.
http://downloads.vmware.com/d/details/esxi41_cisco_oem_iso/ZHcqYnRkdHdiZCpwcA==
Thanks.
Berwin H.

Sorry for any spelling errors:
What is working well for us, is to always get the latest ESX(i) release from vmware, apply all patches and then make sure to install the newest drivers for Cisco fnic (hba) and enic (lan) that can be found on the vmware site.
During our first UCS upgrade (we did not have installed the Cisco drivers) we experienced some issues. A lot of our VMs lost connectivity to storage for about 2-3 minutes during the reboot of the primary FI. After opening a support request at vmware and Cisco, vmware sent us a newer fnic driver, as the standard driver included in the ESX iso did not handle hba failover very well.
Since that upgrade we always keep up to date the enic and fnic drivers for Cisco UCS. They can be found on the VMWare ESX download site.
Newer drivers are also available on the Cisco UCS driver CD, but those are not yet signed by vmware, so it may be a better idea to use those tested by vmware.
Since we are handling ESX updates like this, every UCS upgrade and everything else worked like a charm and my pulse during upgrades got divided by 2
BTW: Also with other server manufacturers we could have saved us a lot of trouble if we simply had upgraded adapter drivers earlier.

Windows 2008 R2 will not install on ESXi 4.0 Update 2

Hello,
I am attempting to install Windows 2008 R2 from an iso downloaded directly from Microsoft on ESXi 4.0 update 2. The server is a C210-M2. The iso is booting to the initial install screen properly, but when electing to install I am immediately prompted with "A required CD/DVD drive device driver is missing." (See attached image)
Wondering if anyone has come across this issue yet and what steps need to be taken to install the OS properly.
Thanks!

Guys,
What you want to do is ensure you have the driver loaded in virtual media when installing the OS. See step 12 in the link below from the Cisco support page.
http://www.cisco.com/en/US/partner/docs/unified_computing/ucs/sw/b/os/windows/install/2008-vmedia-install.html
Hope this helps.

Cisco Customized ESXi 5.5 Update 2 Image

When can we expect to see the new ESXi 5.5 Update 2 custom image? I just checked VMWare's site and I see Update 1 but not Update 2. Is there a supported/recommended method for updating UCS servers to ESXi 5.5 Update 2 in the mean time?
Thanks

1) use this utility to figure out which enic / fnic is required. eg.for ESXi 5.5 U2
Adapter Driver = 1.6.0.12 (FNIC) / 2.1.2.59 (ENIC)
Adapter Firmware = 2.2(3)
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
2) Install ESXi 5.5 U2, regular iso (Non OEM version) from VMware website
3) get the above fnic / enic driver from ISO image of UCS-related drivers
ucs-bxxx-drivers.2.1.3d.iso
4) update the fnic/enic driver either manually with CLI or VUM.

I need help to recover after Link uninstalled during attempt to download updated drivers

I bought a new unlocked Classic. I planned to switch from my Q10 to the Classic using the device switch option in Link. I think that I had Link v. 1.2.3.56 (or maybe .58?) installed on my Windows 8.1 Pro PC.
Using Link I backed up my Q10 and then connected the Classic with the USB cable. The Classic reported that it needed new drivers. Soon I got the option to download BB Blend, Link and drivers. I chose the option to install Blend and update Link and the drivers. The installation/update operation failed. I can't remember exactly the error message, but I believe it said that need to try again.
I was stunned to see that the desktop shortcut to Link was gone! The programs list in Windows Control Panel shows only BlackBerry Device Software updater installed. The RIM folder on the hard drive contains only \BlackBerry Link\en\help_files. I can't find an executable anywhere.
I downloaded Link and attempted to install it, but after I received the message that a newer version was already installed on my PC, I canceled it.
How do I recover? I'd like to get Link back, the new Blend software and the current Windows drivers required for the Classic. Fortunately, my last backup of the Q10 is there in the folder \users\username\documents\BlackBerry\backup.
Finally, I considered using the Device Switch app on both devices, but I couldn't download it. On both devices, I got the error message: "An error has occurred and BlackBerry World will be closed. Try waiting a few minutes and reopening BlackBerry World." That was hours ago. I'll search the hardware forum for information about BB World.
Thanks in advance for your help.
C W Byrd
Solved!
Go to Solution.

You can also try a Refresh if you wish.
http://windows.microsoft.com/en-US/windows-8/restore-refresh-reset-pc

After AVG PC Tune up, software update message for security and stability update is available FireFox 3.6.18. Should I Update?

My Dell laptop (Operating on Windows XP) was hit with multiple viruses - I could not open Mozilla Firefox or any other applications for that matter. After much time and many attempts, I was finally able to install and run an AVG Scan and then an AVG PC Tune up. 4,559 problems found and repaired. After the repairs, I received the following message:
"Software Update - A security and stability update for Firefox is available: Firefox 3.6.18 - It is strongly recommended that you apply this update for Firefox as soon as possible. - an underlined link reading, "View more information about this update" and then 2 choices - "Ask Later" or "Update Firefox." Since part of the problem was with Firefox and some error messages pointed to that, I'm hesitant to click on any of the three options above. Can you help me to get past this error message, please. I am sending this from my home computer. Thank you. Diane

Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer

Where can I download a Windows 8.1 iso for Bootcamp?

I bought Windows 8.1 Pro Retail, but my MacBook Pro doesn't have a DVD drive, and on Microsoft's website I could only find a download section for users who are already on Windows and want to upgrade. I got a valid key, I just need the iso for Bootcamp.

I was in the same boat, Leatherhide. I disagree with what others are saying as you and I both navigated to the Windows Store and purchased full versions of Windows 8.1. We are not trying to do anything illegal here, we simply want to install the product we paid for!
Bootcamp assistant won't recognize the link that we download from Microsoft, since it is only executable on a PC, hence our dillema. Again, we are people who bought this software directly from Microsoft, and Microsoft won't give us the ISO!
Anyway, sign up for this trial program and you will get the ISO download. After you install it via Bootcamp you can register your own unique product key to activate it.
What I did, was install the trial version just so I could use my legit Microsoft download to create the ISO for my personal copy of Windows, then wiped everything an installed from my own ISO.
I hope this helps as I had to comb the internet for hours to figure this out.
Link:
http://technet.microsoft.com/en-us/evalcenter/dn237247

HT3702 Itunes charged for free app download (Update).

Itunes charged for free app download (Update). No clue why this happened. Can anyone tell me what could be the problem?

If you mean the temporary store holding charge, as described on the page that you posted from, then that is only temporary, it should disappear off your account within a few days or so.
That 'charge' is made each time that you change your card details to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account.
If you mean a 'proper' charge, and it appears on your purchase history and on your credit card, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Where is the link to OS X 10.5.8 Update and 10.5.8 Combo Update?

Where is the link to OS X 10.5.8 Update and 10.5.8 Combo Update?
Normally, you can do a Google search for 10.5.8 and the link will pop up right away, but I've tried searching Apple.com and Google.com to no avail.
I don't want to use Software Update and I want to keep a copy of the updater on DVD.
Thanks for any help.

That was a fast reply! Thank you!
I also found them here:
http://support.apple.com/downloads/MacOS_X_10_5_8Update
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
I found them by going to this website:
http://www.macrumors.com/2009/08/05/apple-releases-mac-os-x-10-5-8/

HT5569 My computer is not updating to the new itunes 11.1. Is there a link that you can give me to update it specifically? Because my ipod won't work on my laptop unless itunes is updated.

My computer is not updating to the new itunes 11.1. Is there a link that you can give me to update it specifically? Because my ipod won't work on my laptop unless itunes is updated. I unistalled the 11.0 version because when I tried to update it through itunes it wasn't working. HELPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Try:
http://www.apple.com/itunes/download/
ALso maybe:
Trouble installing iTunes or QuickTime for Windows

How to configure 7120 array for ESXi 4.1?

Hi,
Just taken delivery of a 7120 which has some issues (see previous post!), I need some guidance on optimum config for ESXi 4.1 - I keep reading conflicting info about how to set it up! Here's my config:-
2x Dell Powerconnect 6224 switches (solely for iSCSI traffic), in a stacked config, 6x Dell R710 ESXi servers with 2x Gbe LAN interfaces on each server (one to each switch), Sun 7120 array with 8x Gbe NICs, using 4x of these for iSCSI traffic (2x to each switch). The plan is to have a few LUNs accessible via iSCSI to all the ESX servers, what is the best way to configure this? I'm being told to set up the 4x links on the 7120 as a LACP aggregate but other people say not to use that for iSCSI. If I configure the 4x links as LACP, what config needs to be done to the stacked switches? Do I need to have all the ESX uplinks in one big LACP group, or do I group the uplinks of the individual servers? I believe these support cross-stack etherchannel. Do I then need to set up IPMP?
Each of the ESXi hosts has a separate vSwitch for iSCSI traffic with 2 uplinks configured with jumbo frames, and a vmkernel port on each NIC all bound to the iSCSI SW adapter - each uplink is configured with no standby adapters, and each vmkernel port is in a separate subnet.
Help! I'm used to Equallogic gear and this is just weird :)
JD

Hi Pklos
Thank very much for helping me it worked User Roles>Standard CCM User then add users.
Than very much.
Walter Flores

Duplicate entries for contacts after BB update 10.2.1.2102

Hi,
This is in regards to my boss's blackberry q10.
I recently updated the OS to 10.2.1.2102 (done via phone update not via BB link).
After the update, i noticed that all contacts had a duplicate entry with only one of them containing the proper details while the other was blank. I have uploaded the pics through the dropbox link below.
pictures for BB Q10
If i delete the blank contact, it solves the problem but I have to do it individually for each contact.
Is there a better way of doing this? Would really appreciate your help here.
Thanks,
Brennan

If you open the blank one and go to the bottom and hit "Link" does it show what contact list the blank one is in?
Also, where was the source of the contacts to begin with? Did they come from an Exchange mailbox? Another email account? Wired sync from Link?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Link of ISOs for ESXi 5.0 update 2

Similar Messages

Maybe you are looking for