Link of Preventive order Operation and package table
Hi guys
we are developing the form. there we are collecting the Operations, frequency, Remarks etc for preventive maintenance orders (from Maint plans). We are taking the printout from IW3D.
Now the thing is everything i have acheived except frequency. I have collected the operations from VIAUFK_AFVC, WARPL and call no (But no Package no here). Then if iam putting into MHIS table i could get the package no. Again if we are inputting the same into T351X we will get the short text of stratagy frequency.
My doubt is the order has so many operations , how could we link the which operations and which package..any link table is there..
Thenna,
I am really sorry, i am just not able to comprehend what you are referring to. Could you be a little bit more clear? If you are looking to identify the Frequencies/packages which have caused the operation to be added to the Order, the tables that i have listed out should help you to identify the same Programmatically.
From the Order you can get the Group and task list number. From PLPO and PLWP , you could get a list of all the operation numbers and the packages at which they are due for the task list number. Using the keys from this table, you could identify the equivalent operation number in the Order(The operation number might not have changed between Task list and Order, if you havent re-numbered them).
Regards
Narasimhan
Similar Messages
-
Link Between Sales Order Type and Customer/Material Exclusion
Hi,
Any one know the Link Between Sales Order Type and Customer/Material exclusion tables (Transaction: VB03 ) ?Hello,
For Tcode VB03 you can check KOTG001 for Customer/Material.
Thanks &Regards,
Abhijit -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
How to get the link between MCH1, AUSP, CAWN and CAWNT tables
Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
KumarHi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar -
1. Defining dependencies between Work order operations and Isolation Operation Steps
Hi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
MakarandHi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
Makarand -
Link between Oder number, Operations and PRT ?
Hello,
I am trying to find the link between Ordeer number (T-code IW32) , its Operations and PRT linked to Operations.
Can someone shed some light on the links for these in PM tables ?
Thanks.
Regards,
Rajesh.Hi,
Not sure of the table links..
Use the BAPI BAPI_ALM_ORDER_GET_DETAIL..to get the operations, PRT other details for the service order..
Thanks
Naren -
Link between Purchase orders created and ORCM(Recommendation report)
Hi,
In purchase orders created from MRP recommendation report, we want to change the price, warehouse and some UDF's .For this functionality we are stopping the B1 functionality and adding the Purchase orders through our coding,In this scenario once the purchase order is added to B1 the same record should not be visible in MRP recommendation for creating the Purchase order again.
we are not finding the link how can we update the ORCM table from were MRP recommendation is picking data to change the status field to "D" so that it will be not visible for creating purchase order again.
Can any one please help in this issue.
Thanks in Advance.
Thanks & Regards,
OmPrakash.
Edited by: Om Prakash Akarapu on Dec 26, 2008 6:05 AMHi
in <b>EKKN</b> table you have sales order and Item fields (VBELN and POSNR)
using these fields search for the deliveries in LIPS table
EKKN-VBELN = LIPS-VGBEL and
EKKN-POSNR = LIPS-VGPOS
<b>Reward points for useful Answers</b>
Regards
Anji -
Cost Center field in Production Order CO01 and PO tables
Hi SAP Consultants,
Is there any Cost Center field in Production Order transaction CO01 ?
What are the tables where Production order data is stored/saved ?
Any help would be appreciated.
Thanks in advance.Need to understand your purpose first. Let's not make it any more technical than it should be, talking in terms of fields and layouts.
All the replies given before mine are referring to the operational costs - which are what are passed on "for performing each operation" of the production order. These are the costs coming to the production order from the work center where the operation is performed. At the end of several operations, the production order would have collected all these costs of different operations, and also those of the materials used in the process. There may be other (overhead, etc) costs coming on to the production order too.
If you're looking for one "cost center" for the entire production order, what cost center is this? Is it the department to which you want to settle the production costs? This is possible, that all the costs accumulated in the production order over the course of its life are finally "settled" to a different cost object, which can be an inventory account, or a sales order, an internal order, or a cost center etc. (There are exceptions, where a production order need not be settled but lets leave this to save us some complexity).
What exactly are you looking for? What is the business purpose you are trying to achieve? Or is it just a purely technical reason to write a report or something? Even then we need to know the purpose and objective of the report/enhancement before being able to answer your question.
-Ram -
DMS link with Purchase order,invoices and material master
Hi, all,
Here is my ?
Can we link incoming material invoice with purchase orders for reference purpose throught DMS.
rgds,
benhi
you can link the objects through object link in dms.
go to tcode dc10 select the documnet type, click on define object link. click new entry and select object type as EBAN/EKPO
this way dms is link to purchase order.
thanks ,
regards,
nitin
award point if useful -
Mapping links wont work in Opera and IE but do work in Safari.
Hi,
What can I do to fix the code below? The links wont work in IE and Opera, but OK in safari.
The error message is:
in tag: map the following required attributes are missing: id[XHTML 1.0 Transitional]
Code
<div id="mainContentLeft1b">
<div id="mainContentArticle2">
<h3>Locate Region</h3>
<p>National Contacts</p>
<img src="Images1/MapAustralia.png" width="600" height="490" alt="stateregion" usemap="stateregion" />
<map name="stateregion" id="stateregion">
<area shape="rect" coords="508,282,554,345" alt="NSW" href="http://www.1" />
<area shape="rect" coords="421,397,506,485" alt="QLD" href="http://www.2" />
<area shape="rect" coords="233,1,389,163" alt="QLD" href="http://www.3" />
<area shape="rect" coords="220,179,372,306" alt="NSW" href="http://www.4" />
<area shape="rect" coords="379,218,597,284" alt="NSW" href="http://www.5" />
<area shape="rect" coords="458,284,509,325" alt="NSW" href="http://www.6" />
<area shape="rect" coords="-5,-3,217,227" alt="WA" href="http://www.7" />
<area shape="rect" coords="353,323,505,371" alt="NSW" href="http://www.8" />
<area shape="rect" coords="398,16,590,211" alt="NSW" href="http://www.9" /></map>
</div>
Thanks
KarinCan we see a URL to your test page where the "links don't work."
Unfortunately, code fragments don't help us help you.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/ -
Linking between Sales order data and Biling condition
Hi Bwers,
Currently we are geneating a report with Sales order Item level (2lis_11_VAITM) information and Biling conditions(2lis_13_VDKON). We have respective DSO for both datasources (Sales order DSO and Biling Condition DSO). We have to pull both information into a report.
We have sales order number (0DOC_NUM) in Sales DSO and Biling document number (0BILL_NUMber) in Biling DSO. And we found Sales order Number (0BILL_NUM_0DOC_NUMB) as an navigational attribute for Biling DSO.
We are trying to extract Billing condition type and Billing condition value from Billing DSO.
Now the question's are:
1. Can I use Sales order number as linking field for Both DSO' or not. Though It is an Navigational attribute for Biling document number in Biling DSO.
2. Is the Sales order number and Billing Document number both are same or not. What is the linking field between sales order info to Biling info.
2. How to bring Sales order info and Biling info into a report through Infoset. If infoset which link should I use bring both info into a report.
3. Or Multiprovider is the right one.
3. Please let me know if any other linking fields are existed between these two datasources other than Sales order.
All the helpful answers are awareded with full points.
Regards,
Venkat1. Can I use Sales order number as linking field for Both DSO' or not. Though It is an Navigational attribute for Biling document number in Biling DSO.
- yes you can link, Navigation attrbute does not matter
2. Is the Sales order number and Billing Document number both are same or not. What is the linking field between sales order info to Biling info.
--one sales order number may correspond to different billing number including the one which shares the same number.
2. How to bring Sales order info and Biling info into a report through Infoset. If infoset which link should I use bring both info into a report.
-- Multiprovider is the best option while dealing with such cases.
3. Or Multiprovider is the right one.
--yes.
3. Please let me know if any other linking fields are existed between these two datasources other than Sales order.
there may be possibilty of other fields also like Profit center, Controling area etc depending upon your project requirment -
Link between maintainance order reservation and pur requisition
Dear Experts,
I need link between maintainance order reservation number against a materials and purchase requisition raised against it.
Basically requirement is that i need a report in which i can c the purchase requisition against the materials of maintanace order..
Please help me out
Regards,
Vishalhey somebuddy will plz help me out ...
-
User exit for order operation and internal assignment (SAPLCY18)
Dear all,
I am currently facing the problem below, which I have posted in PLM forum. However, I have been advised to ask in EAM forum, since probably my problem is more EAM-related.
The problem currently facing is related to PM order operations. The customer's requirement is to use operations and to include the personnel numbers involved. For this solution, our proposal is to have the operations and within internal operation data to use the tab requirement assignments in order to include the personnel numbers. Also at this level, the client expects to maintain the the 'hr' (work requirements) for each personnel. For example there are used 2 personnel ids with hr requirements of 2hrs and 3 hrs respectively. Let me mention that in the operation screen, the hr requirements are initially defined equal to 1 hr.
In the above case the message "The work of all the splits is greater than the work in the operation" apperas, since 1hr 5hrs. The question is if there is any way (user exit, badi) to update the work requirements in the operation with the sum of the internal assignment data.
Program SAPLCY18 may be help, although I have not found the work around.
More explanatory details to help:
The combination using Work-Number of capacities-Duration and the Calculation key is already used, however the requirement is to use specific personnel numbers. SAP, as far as I am aware, allows you to define personnel numbers within internal operations.
TAB Requirements assignements is available as long as in the operations main tab you have completed for the selected line the values Work-Number of capacities-Duration and Calculation key. Thus, in TAB Requirements assignments you can input the personnel numbers and the work of each one.
The question is if we can use the Requirements Assignments TAB, using the button internal in the operations tab in order to define the personnels involveld and according to the work (hrs) to update the respective field of the operation (otherwise let's say to update the duration field for each personnel id and automatically the operation respective duration field to be updated).
Your feedback is highly appreciated,
thank you in advance,
Bou.LisPeteA,
thank you for your response. I am actually looking for such a development solution (more-or-less I know that it is not possible using standard SAP customizing) but unfortunately I have not yet found such a user exit or BADI that could help solving the problem facing.
Do you have any idea of such a development tool to use?
Thansk and regards,
Bou.Lis -
CRM order message and notes table
Hi
we have Error/warning messages and notes in CRMD_ORDER (ie in CRM sales order). I am looking to get the tables for message number and notes. The purpose for this is I need to give these details to BW team for extraction. The standard extractor doesnt have these fields (ie message number or notes)
Here is the research I have done till now
1) for Messages people are suggesting to use FM - CRM_MESSAGES_DISPLAY which gives Log handle and Message number. with this data call CRM_MESSAGES_GET_MSG_INFO and this will give the Application area and message number which can be queried in T100 table
2) for notes I was suggested to use the FM - READ_TEXT
The option I have is use a user exit (extractor) and populate these data in the extractor before sending it to BW
Can you please let me know if message number and notes in a order can be directly queried from tables (is there a link table that connects the order GUID to the message table (T100) ?Hi Veena
I tried this but it doesnt get me to the actual notes. I was able to query STXH which doesnt have the actual notes. So I further went into STXL table where there is a field called "Data" which looks like a big GUID but not sure if there is a another table I need to plug this to get the actual notes.
What I heard from the ABAP team is that there is no way to get this data through direct or link tables. We have to use the READ_TEXT FM
Edited by: Vikas BhumiReddy on Jul 6, 2011 4:55 PM -
Import standard Purchase Order process and interface tables
Hi all,
We are populating three PO interface tables from our custom developed application. PO_HEADERS_INTERFACE, PO_LINES_INTERFACE and PO_DISTRIBUTIONS_INTERFACE. We are using 11.5.10.2 version of Oracle Apps.
Initially we did not manage to populate the distributions interface table, but, now we are populating it. And after doing so, when we run the Import standard Purchase Order process for 'Approved' POs, the process_id for even the record which has correct distributions info also gets 'Rejected' as a value. The process is considering a mix of records : the approved POs that DO NOT HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE (which we had not managed to populate) and the approved POs that HAVE distribution info in PO_DISTRIBUTIONS_INTERFACE.
does the Import standard Purchase Order process populate partial data that could be good or it rejects the whole lot of records?
Can anyone guide on this issue?
Thanks and kind regards,
Aparna
Edited by: Aparna on Jul 24, 2009 3:45 AM
Another piece of info I would like to share is
I have run the process for an approved PO with distributions info in PO_DISTRIBUTIONS_INTERFACE. This time no mixed data. In PO_INTERFACE_ERRORS table, an entry was found: for column name : PO_DISTRIBUTION_ID in ERROR_MESSAGE column 'Error: Has no distributions'.
Edited by: Aparna on Jul 24, 2009 8:03 AM
After carrying out number of tests, I have found out that
1) if the approval_status for the po is 'Approved' in the po_headers_interface table, it gives the above mentioned error and the process_id is 'rejected'.
2) if the approval_status for the po is 'Incomplete' in the po_headers_interface table, the process add the 'accepted' value for the process_id. But, the charge account number is not populated in shipments.
Edited by: Aparna on Jul 31, 2009 1:07 AM
There has been some progress on this issue. The process sees distributions data into the PO_DISTRIBUTIONS_INTERFACE table. Yet the following errors are found in the process log file:
Start dist default process
before getting period name
after getting period name
-->Intfc error occurred ...PO_PDOI_INVALID_GL_ENC_PER
before workflow
unit price = 18.5, rate = , unit price in functional currency = 18.5
after workflow
Start dist creation process
Start dist validation process
-->Intfc error occurred ...PO_PDOI_INVALID_BUDGET_ACCT
Start insert new record into po_distributions
Distribution ID: 252
dist num: 1
last updated by: 1189
po header id: 5283
po line id: 5878
line loc id: 5924
sob id: 21
cc id: 1560
qty ordered: 10
Req Header Ref num :
Req line Ref num :
Req dist id :
ROW ID: AAHUc1AFPAAAQ04AAC
call tax
Rollback for the Last Errored Line: 10
All Lines in error - Rolling back the header
We opened new GL periods for the calendar and yet same errrors are seen. Can anyone suggest any solution?
Kind regards,
AparnaHi
Do you have a copy of your insert statement?
regards
Maybe you are looking for
-
Hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10
hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10 also, these were bought on line with no disc (god knows why) how can I access these from adobe.com
-
I am not able to delete the app icon (loading) of more than 20MB file app. I have downloaded them to my itunes but they just dont go away even after syncronising. just to mention i have 3G network but no wifi at present.
-
Ok, this is an outstanding question/problem I have posted on another forum. Video drivers. ATI and nVidia are constantly updating drivers for performance increases and bug fixes but I have yet to get some kind of answer on how/if/where I am able to d
-
Can't use iPhoto Album as Screensaver in Snow Leopard with iLife '11?
I just upgraded my iMac to Snow Leopard (10.6.3) so I could install iLife '11. After installing both, I noticed my screen saver wasn't using the iPhoto album I had originally selected before the upgrade. When going to System Preferences > Destop & Sc
-
Unchecked call to to add(E) ....... HELP
Hi, i was doing a project in eclipse, and everything was fine (compiled and running). However, I ran into this problem when I try to compile the same code in DOS command line. Is there any ways that I can fix this problem so the same code that runs i