Link of solaris 10 and ebs r11i for solaris

hi all,
I need link of solaris 10 and oracle ebs r11i for solaris to download.
Please send me
Regards
Rizwan

I did not find any link for solaris 10 32 bit,
I also still find no link in edelivery.oracle
please send me both link for solaris 10 32 and its related EBS versionOracle Apps 11i is no longer available for download and you have to log a SR and ask Oracle Support to send you the Media Pack.
For Solaris 10, please refer to:
Oracle Solaris Downloads
http://www.oracle.com/technetwork/server-storage/solaris/downloads/index.html
Thanks,
Hussein

Similar Messages

  • Smpatch and Recommended Patches for Solaris 10

    Hi,
    Is there any way to make smpatch only retrieve recommended patches for Solaris 10 ?
    I've seen several forum posts saying to use
    smpatch set patchpro.patchset=recommended
    but other posters indicate that this only works for Solaris 9 (additionally, it doesn't seem to work at all currently:
    Failure: Cannot connect to retrieve recommended.zip: Not Found )
    As far as I'm aware, Sun's patching policy is to apply the Recommended patches, as well as any that address specific issues you are having. This seems to contrast with the behaviour of smpatch which grabs all patches..

    Hi.
    Depending on your hardware, you can use the following in place of 'current' in patchpro.patchset to get recommended patches:
    sunu45 = Sun Ultra45/Ultra25 Recommended
    sftxk = Sun Fire T1000/T2000 Recommended
    sfv2x5 = Sun Fire V215/245 Recommended
    sfv445 = Sun Fire V445 Recommended
    Mod.

  • Solaris on Intel/apps for solaris compatibility

    Does anyone know how to run apps available for Sun solaris (sparc verion) to run on Intel solaris? I tried to install sybase client s/w on Intel solaris and obviously it bombed. Is there any kind of emulators or anything that would make this work?
    Thanks

    Well written code (e.g. avoiding hardware specifics, byte-order differences etc) is intended to be readily portable from Solaris on Intel to Solaris Sparc.
    The Forte tools from Sun are recommended, and a Try&Buy version can be had from the Sun download center. Sun also provides the Gnu tools on the companion CD shipped with Solaris media kits or at sunfreeware.com
    Have Fun!

  • Link between Class and characteristics created for that class

    Hi All,
    Is there any table that I can look at to find a link between class and the characteristics created for that class. For all the list of characteristics created I am refereing to CABN table but my requirement is to find the logic to see all the characteristics created for a class. Can anyone suggest me the right table to look at?
    Regards,
    Shane

    Hi,
    I would like to thank you for your quick response. So based on your thoughts, here is the process i followed to find the characteristics for a existing class,  took the Internal class number and used the KSML table to find all the Characteristics created for that class.
    To find the list of values assigned to that characteristics, used the AUSP table for that characteristics internal number.
    Thank you again for your inputs
    Shane.

  • Reg; Table for link between plan and sales organization for a material

    Hi,
    I created a material for two plants and maintained one sales org, now i wnt to know the table to find the link betwen plants and sales organization wtih respective materials.
    Pls Help me......
    Thanks,
    Anto.

    hi,
    check tables MVKE, MARC and MARC...
    You can view them in SE16/SE11 tcode...
    Regards
    Priyanka.P

  • Solaris Security Toolkit (JASS) for Solaris 11?

    Has anyone heard anything about an updated version of this for Solaris 11?
    Or I'm curious if anyone has tried running the Solaris 10 version on 11?
    Thanks

    Don't run the Solaris 10 version on Solaris 11, it will not work correctly.
    Many aspects of what SST did on Solaris 10 are part of Solaris 11. If there are things you need that aren't covered, I'd suggest opening a support case.

  • Static linking of libpthread and librt libraries in Solaris 8 and 10

    Hi all,
    We have created a solaris application which uses functions defined in libpthread (POSIX threads) and STL classes (string, list, map, vector etc.)
    This application runs perfectly in our environment. However at other sites, there are crashes observed and debugging the core files indicate problems in generic places such as string.append() etc. We are not sure whether these problems are occurring due to dynamic linking of libraries.
    Initially we had 1 problem due to libCstd and by following the procedure specified in http://forum.sun.com/thread.jspa?forumID=5&threadID=19287 , it was solved. I still find that the libraries including libCstd are dynamically linked to the application.
    I would like to know the following
    1. Is there any way of statically linking pthread and rt libraries?
    2. If not, then is there any way to statically link all other libraries except for pthread and rt which can be linked dynamically?
    Thanks,
    Shekhar

    You are posting in the C forum, but your question is about C++.
    Not all runtime libraries are available as static libraries. Solaris is moving away from static libraries, and on Solaris 10, the main system libraries are available only as shared libraries.
    Linking the C++ runtime libraries statically is generally a bad idea, although there are restricted application areas where it might be safe. If you build shared libraries as part of your application, or if you deploy on different kinds of machines or on different Solaris versions, you should link only to shared system libraries. Linking to static libraries can result in programs that will not work.

  • Java and Oracle support for Solaris 10?

    Hi
    Does anybody know when Oracle plans to support Solaris 10?
    We plan to purchase a Opteron server and would like to use Oracle.
    We also plan to use Sun Java AppServer Platform Edition. Any idea when that will support Solaris 10?
    Am I correct in assuming that Solaris x86 will run fine on an Opteron system.
    thanks in advance

    Oracle support Solaris 10 x86 but I doubt it's native 64 bits. The App. server is supported just go to Sun's site. The short answer is that Oracle and the App. server should both work but not necessarily in 64 bit mode.
    As for the Opteron system, you should check the HCL.

  • ISM and DISM  resources for solaris 10 ???

    Hi everyone!!
    can anyone guide me to resources regarding Intimate Shared Memory
    and Dynamic Shared memory on solaris 10
    i tired searching for them on sun sites but results are mainly for older versions of solaris (solaris 8 etc)
    what are advantages to the developer for using them ???
    regards,
    reinman

    Hi.
    Depending on your hardware, you can use the following in place of 'current' in patchpro.patchset to get recommended patches:
    sunu45 = Sun Ultra45/Ultra25 Recommended
    sftxk = Sun Fire T1000/T2000 Recommended
    sfv2x5 = Sun Fire V215/245 Recommended
    sfv445 = Sun Fire V445 Recommended
    Mod.

  • Communication and Mob. availability for Solaris Intel or MacOS X Intel?

    if there is , how stable it is to run this software over a compatibility layer on top of these OSs ?

    I successfully connected an Intel Xserve to an EMC Clariion X600 array this past summer for testing purposes. Just make sure you get the UUID of the SAN from the System Admin of the SAN array. Similarly you'll have to give the SAN admin the UUID for your Fibre Channel interface. The UUID is like an Ethernet MAC address and allows you to see the SAN array over the Fibre Channel connection. We also had to get an SFP adapter for our Fibre Channel card as our SAN switch was all fiber optic connections.
    Once we configured both ends of the Fibre Channel and the System Admin had allocated a 100GB slice to my UUID, I initially couldn't see the SAN. After about a day of delays and double-checking the SAN admin rebooted the SAN, I rebooted the Xserve and the 100GB slice magically showed up in Disk Utility as unformatted storage directly attached to the machine. I don't know if there's any trick to configuring the Clariion box. I know they made no adjustments or changes to get the Mac to work on the SAN side. The system admin of the SAN kept saying, "We've never done this before,... You have to install the drivers for the SAN,... what interface is the Mac using?...Who manufactures it?...Do they provide any drivers whatsoever for the Mac?...
    Also our on-campus Mac re-seller directed me to alienRAID.org
    http://alienraid.org/
    There's some entries there on hooking Apple Fibre Channel to Clariion hardware:
    http://alienraid.org/article.php?story=macosxemcsupport

  • Solaris x86: learning tool for Solaris SPARC?

    I would like to know to what extent Sol x86 knowledge and experience would translate over to Sol SPARC. Not in a *NIX general sense, but Solaris specific.  The company I work for sells backup devices including virtual tape library devices, and it is my job to test them with various operating systems and backup software.  We have a Sol SPARC server solely for that purpose but it's still not something I can muck around with.  Something I definitely need experience with is setting up and configuring tape libraries.  So, specifically in this regard, but also in general, how would Sol x86 experience carry over to Sol SPARC?  Thanks in advance.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
    The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
    So you can't get as close as you may want, but I'll bet it would still be helpful.
    Darren

  • How to link Sales Order and WIP job for non-ATO items

    Hello All,
    My client's requirement is to link an Sales Order with a WIP Job as soon as it is booked.
    It is for FG and for a non-ATO item.
    The process should be to have SO booked and then it should raise a WIP job based on it if there ar no inventory stocks.
    Thanks in advance.

    You will have to write an extensive customization that will work similar to planning engine.
    It will have to look at order quantity and then look at onhand, reserved onhand, min-max quantities, safety stocks, move orders etc etc and then create a job if necessary.
    Are you sure you want to do it this way?
    Hope this helps
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant
    513-325-9026

  • Communicate link between Java and ABAP Stack for https

    I have configured https in both the java and abap stacks (we have a double stack configuration).  Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions. 
    The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
    I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name).  Where is this configured?  Any help is appreciated..

    Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
    Regards,
    Henrique.

  • Need IMAP and POP for solaris 8

    Hello,
    I need to install impa and pop agent for solaris 2.8 machine and can anyone please help out where I can file them or buy them ?
    Thanks
    -K.Kim-
    [email protected]

    There is a freeware IMAP daemon available on the
    Solaris 8 companion software CD.
    http://www.sun.com/software/solaris/freeware/index.html
    -- richard

  • Oracle 9i for Solaris download

    For the past few days I have been trying to download Oracle 9i database for Solaris. I am having two problems
    1.) When I go to http://otn.oracle.com/software/content.html and select "9i Database", all I see is "<SCRIPT LANGUAGE="javascri".
    2.) I am able to get to the Oracle 9i download page by connecting to http://otn.oracle.com/software/products/ (instead of http://otn.oracle.com/software/products/oracle9i/software_index.htm ) but once I get to the 9i for Solaris download page the links act like they have invalid URL's.
    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename : 901solaris_disk*.cpio.gz
    - Date/Time Mar 28 - 30 2002
    - Browser + Version : IE 5.00.3315.1000
    - O/S + Version : Windows 2000
    - Error Msg : "Can not find server or DNS error

    ramkumar swarnkar wrote:
    Can anybody let me know link to download oracle 9i software for solaris OSThe normal places to check for downloads are at http://download.oracle.com and http://edelivery.oracle.com
    If the software you look for is not at either of those places it is probably because they are outsiide 'normal' support status. In that case you need to contact either Oracle Support (if you have a valid CSI) or Oracle Sales (to get a CSI number) to get the software.

Maybe you are looking for