Link opened in an IFRAME abandons the page

A certain page on my site uses an iframe to link to a page in another domain. My page loads properly and displays the content from the remote domain in the iframe that I expect to see.
Problem comes whenever I click on any link within the iframe. The page from the remote domain abandons my page, reloading in the browser, instead of refreshing the contents of the iframe.
Any suggestions to correct this?

DOH!!
"Accept third-party cookies" was turned off in Privacy settings. Allowing third-party cookies solved the iframe refresh problem in Firefox 4.

Similar Messages

  • My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

    Question
    My screen opened, and with every click the page (letters/images) got bigger. I can not get it to return to normal image size. I have to use the slide bar to read across the page. What do i do to correct it back to normal size???

    Hi jholzworth,
    It sounds like you might have accidentally hit the zoom button. Try hitting ''CTRL + 0'' to return it to normal size. Just so you are aware, ''CTRL'' and ''+'' will zoom in and ''CTRL'' and ''-'' will zoom out.
    Hopefully this helps!

  • Open new tab from any webpage, click any link on new tab, waits till the page is loaded and try to go back one page on new tab (arrow is disabled).

    It happens whenever I open new tab from any wabpage. Once the tab is opened and initial webpage is loaded I may use any link to jump on another, second webpage in same tab. However, if I want to go back on initial webpage I can't do it cause that option (arrow) is disabled. I could use link on second webpage to jump on third, and only at that moment go back option becomes available again. However, I could not ever go back on initial webpage any more. As initial webpage has never existed.
    It happens quite often (95%).

    Right click the Back button and select the page you want to go back to from the list.
    If the list is too long to display via the Back button, hit CTRL+H, change the view to "Last Visited" and then load it from there instead.

  • When I right click and select open link in new tab, it leaves the page I am on and takes me to the first tab to the right

    I usually have many tabs open when I read the news, and it is nice to select open links in new tabs while scrolling through a news' home page. Lately, however, Mozilla has been opening the new tab, but switches the page I am viewing to the first tab to the right of the home page. For example, I had ESPN.com open, and then a few Facebook tabs after that to the right. Whenever I would select open link in new tab, the tab I was viewing would switch from ESPN.com to the first Facebook tab to the right, and the new tab would open a little further down the line. Any chance anyone knows how to fix this?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Open a link in an HTML article on the page

    Hello,
    I'm using an HTML article to collect an answer to single question survey. I've got the page built and loaded with two links (one for each answer) that go to pages on my web server that contain a "Thank You" message and log the user's response.
    I've also used jQuery to change the page and disable the links when the user's device is offline.
    However, when a user clicks on a link (to answer the question) the resulting "Thank You" page is loaded in the DPS web browser.  The behavior I'd like is for the page to replace the HTML article. Is that possible?  I vaguely recall an advertiser of ours messing this up in an ad a while back and us having to fiddle with the target attribute of the link tag to make it work, but now I'm at a loss.
    My alternative is to use an iFrame, but this doesn't seem like the best answer.
    Thanks for any advice you can offer!
    Steven

    You just need to select "Allow User Interaction" on the Folio Overlays Panel.
    More info on web content overlays here: http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c73657495129f66e490f-7f fa.html

  • Why does selecting a web link open 2 windows, one with the link and the other the home page? This is a single click of the mouse.

    When I single click on a weblink (usually in an email, Firefox starts up and opens two windows; one with the selected web page and one with my home page. If Firefox is running, it opens a new tab which is what normally occurs. It is only when it is not open that I now get the 2 windows. I have an imac running OSX 10.6.3
    == This happened ==
    Every time Firefox opened
    == In the past couple of weeks.

    Hi,
    The rolling over from radius servers only occurs on the same wlan and only when the controller deems the radius server being dead. However, if you get rejected from one WLAN but then you reassociate to another WLAN there is no mechanism in place in rejecting the attempt because they previously failed on a seperate wlan. This happens all the time with users connecting on incorrect wlans.
    The failover feature is for when you have multiple servers (usually for redundancy) on the same WLAN. So when user is rejected but radius server 1 the process stops there and the request isnt sent to radius server 2.
    Hope that helps!
    Tarik Admani
    *Please rate helpful posts*

  • Hello- I would like to have new pages open in a separate tab automatically...(i.e., Google--- Google listing---click on listing-----auto open new tab and put the page of the google listing that I selected, on the new tab. Thanks. RMartinez

    Hello again-
    Here is my scenario-
    I am browsing, and let's say, I'm on Google. I look up "albatross novels." I get 6 hits. I look at the list, and I pick one of them. I double-click on it, and away we go. My current Google search page is REPLACED by the selected "albatross" site. But it's not exactly what I want. So now I click the BACK ARROW to go back to the Google page, to look at the other 'albatross" hits. And now I find another site, replacing my Google page when I open it......And THAT site takes me to another site, and another, and yet another......But then I realize that the first site WAS the best one. Now I have to hit the back button 15 times and probably NOT reach the Google page from which I started.
    But if I could have the new pages open in a new tab, then I could go back and forth between all the pages without worrying about the back button.
    I am sure that this is just a setting change somewhere, but I can't find it....I do have it on my work computer.
    Thanks/Rod Martinez

    When I open a link from a search it does open in a new tab ''(it is new, but it is at least in Firefox 4+)''<br>
    '''browser.search.openintab''' user set '''true'''
    '''More information on configuration variables''' available in
    [http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).
    You will find interesting reading on tabs in
    * '''Tabbed Browsing''' in Firefox<br>http://dmcritchie.mvps.org/firefox/tabs.htm
    * '''Tabs configuration''', extracted from About:config entries - MozillaZine Knowledge Base<br>http://dmcritchie.mvps.org/firefox/tabs_config.htm
    * 001 '''Tab Capacity Test'''<br>http://dmcritchie.mvps.org/firefox/tab_capacity/001_with_underscore.htm##
    * '''Tab Color Underscoring active/read/unread''' (Fx3.6) - Themes and Skins for Browser - userstyles.org<br>actually colors all borders not just an underline-- see picture in Tabs Bar Minimal Size<br>http://userstyles.org/styles/24728
    * '''Tabs, Enlarge list-all-tabs button''' - Themes and Skins for Browser - userstyles.org<br>http://userstyles.org/styles/18553
    * '''Tabs Bar Minimal Size''' - Themes and Skins for Browser - userstyles.org<br>http://userstyles.org/styles/9043
    From a Google search you should have the pages open in another tab, but with Google that is not quite good enough because they have them open all in the same new tab ''as you noticed so you've done that''.
    * Search and Substitution Shortcuts especially for Firefox users<br>http://dmcritchie.mvps.org/firefox/search.htm
    You can use '''Ctrl+click''' or '''Ctrl+Shift+click''' to open a link in a new tab.
    * Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://dmcritchie.mvps.org/firefox/keyboard.htm
    You can use '''app-tab''' to pin the tab, right-click on the tab and choose pin-tab and the opposite to unpin tab, or delete the tab when done.

  • Everytime i open some websites, it displays the page for a while then load to another blank page.

    hai. i need help. and just for heads up, i;m not computer/tech savvy.
    i dont remember when this problem was started (maybe around 2 or 3 months ago) but everytime i opened some sites, the page displayed for a while then it reload itself and shown a blank page. the link is still the same with the link i tried to access, it just keep loading and shown blank page till it stop loading. refreshing the page wont help. usually i need to click 'Back' then while it shown the page i click 'X' to stop the page loading, so i can see the page.
    but if i need to download files, stopping the page wont make me able to downloaded the files since the page didnt fully loaded.
    the websites i encountered this was (so far) :
    - Indowebster (download page)
    - wiki.d-addicts.com (a wikipedia kind of page)
    - photobucket (just encountered this today)
    - and 1 or 2 other sites, i forgot.
    but i can access all those sites just fine with IE. I also able to access it in Mozilla thru my work computer. at first this dint really bother me as i can just click 'stop loading page' or found another download sites for downloading. but as today i experienced it with photobucket 9which as far as i know didnt happened before) it made me worry that soon i would experiencing this with another sites too.
    editted to add info :
    i already clear cache and cookies. also disable all extensions in my add-ons. from some discussion page, many of them found that this was caused by Real-Player. i have uninstalled Real Player and have disabled the Real Player Plugins long before this problem occured. so i dont think Real Player was the caused.

    hi.. actually before i was afraid to update anything other than anti-virus, since i read many people seems updating something and turns out they got malware/virus with it.
    but i have update it to Firefox 21 (the newest version it seems) and didnt encounter any problem again. and hope not. it just the new version disable my orbitdownloader. any suggestion to bring it back? (or should i post new thread?)

  • ICan you create and link Templates in DWCS4 after all the pages are built as HTML?

    I used Dreamweaver CS4 to create a website(about 50 pages).  Only after completing it did it occur to me that I should have made the pages using Templates .  There are certain areas (footer, navbar, header) that will need to be globally updated occationally, but since none of the pages were built off a .DWT am I out of luck?  Is there any way to create templatized pages from my existing HTML and have them LINK so they will globally update?   The thought of going through and doing each of these over individually is daunting!

    I used Dreamweaver CS4 to create a website(about 50 pages).  Only after completing it did it occur to me that I should have made the pages using Templates .
    That's called putting the cart way ahead of the horse.  You would need to build a Template first, then spawn child pages from that Template.  Since you're already up to your neck in this project,  consider using server-side includes instead of Templates.
    SSI's
    http://www.smartwebby.com/web_site_design/server_side_includes.asp
    More on SSI
    http://forums.adobe.com/message/2112460#2112460
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Hi , I m not sure i m in the right comunity but my problem is..i have an ipad 2, brand new..In Settings when i press Mail,Contacts,Calendars..the page doesn t open..What happens is the page back to the initial page..Any ideas?? Tks, Andreas

      Hi
    I m not sure i m in the right comunity.
    I have a brand new Ipad 2
    In the SETTINGS page, when i press MAIL,CONTACT , CALENDARS the page back to the initial page and do not open the page requested..
    Any ideas?
    Tks for the help

    A reboot should be enough to make it work.
    Just restart your computer.
    Otherwise, make sure you're an administrator - as if you're not, it could be that the administrator put a restiction.

  • How do I disable the link address popup at bottom of the page?

    I do not want links to appear in the small popup window at the bottom of the page. I was using the workaround here https://support.mozilla.org/en-US/questions/822487#answer-184316 but since Firefox 25.0 that annoying popup has appeared again.

    Add code to the userChrome.css file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    statuspanel { display:none!important; }
    </nowiki></pre>
    You can also choose to hide only specific messages and still have some displayed.<br />
    Some selectors:
    <pre><nowiki>statuspanel[type="overLink"] .statuspanel-label
    statuspanel[type="status"] .statuspanel-label[value^="Looking"]
    statuspanel[type="status"] .statuspanel-label[value^="Connect"]
    statuspanel[type="status"] .statuspanel-label[value^="Waiting"]
    statuspanel[type="status"] .statuspanel-label[value^="Transfer"]</nowiki></pre>

  • TS3230 I can't open web based PDF files - the page is just a black one - anyone?

    Can anyone help me?  I can't open PDF attachments - online the page opos up as blank and black, and with emails on gmail - the document just wont open.  I have tried to reload my adobe reader to no avail. 

    Back up all data.
    If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
    Triple-click the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • How do u make the screen zoomed in on safari? every time i open safari it seems like the page in far away and i want to fill up the screen

    everytime i open up safari it seems like the page is really small. ive zoomed in but when i close the page and open up a new 1 its back to the same size it was before. how do u permanently zoom in so that evertime i open up safari it stays the same as i want it?

    Do any of these or combination of.
    1) Click and drag any of the 4 corners.
    2) Top right coner you will see double headed arrow, click it, when you want to go back to your 'Normal' preset size press Escape key.
    3) To Zoom in do a two fingar double tap on Trackpad, see System Preferences for Trackpad settings

  • Safari appears to be open but I cannot see the page, Safari appears to be open but I cannot see the page

    I try to connect to internet with safari and program seems to open but no window appears. I have tried deleting caches, history plist to no avail. This is an older computer that I am trying to get more in line but my 1999 G4 run better. Please help me view the page and then I can get to where I need to upgrade. Thanks

    Ok, depending on your email provider you may be able to change this, for example my email account is with GMAIL, so if yours is GMAIL as an example having a trash folder on your iPad will only ever delete mails from your iPad, they won't be deleted from the mail server, and carrying on with this example maybe the server is full, but I'd suspect you may get an error message regarding this.
    Have you checked your iPad trash folder? If so is this full or empty at present?  Have you also tried closing the Mail app and reopening it, it could have just glitched out.
    If you've tried the steps above and get no joy then it may be worth trying a reset: To do this with iPad turned on hold down the Sleep/Wake & Home buttons until the Apple logo appears.
    Regards,
    Steve

  • Open Letter to Apple and the Pages DEV Team

    Dear Apple -
    I am a web developer and a beginning fiction author... I love my macbook... I am planning to get a ipad with the Pages App soon (upgrading to a Macbook Pro first). I am also an owner of the iphone 4, and therefore have explored ibooks. Here is a hint from someone who while I am a beginning author, I have done ebooks for technical writing and user guides with my paying clients.
    Do you want to kill the kindle and the Amazon eformat?
    There is one thing you at Apple can do that will hasten the death of AZW. Add a export to epub format option in Pages. I have bought iworks every time a new version has been released. This is something I can not say about any other product, including OSes. For someone who has been in IT for over ten years, such product loyalty is rare. Please make it easier for me to use epub then it is to use Amazon.
    Thank you
    Tom S.

    Martin Luther had an easier job of getting noticed.
    If memory serves, the worthy doctor was protected at the Diet of Worms by Friedrich der Weise, Frederick the Wise, the Elector of Saxony. There is an excellent engraving of Friedrich by Albrecht Dührer.
    The problem in the present situation is that the institution that has been selling letters of absolution has been doing so on paper that allows the letters to fall off the page, so to speak. And it has some problems admitting to this.
    /hh

Maybe you are looking for

  • BusinessObjects Portal Integration - iView Template Missing

    Hello I have installed my BusinessObjects for Portal as follows: 1. We already have BI 7.0 on SQL 2005 on BIDEMOSER SERVER. 2. Installed BusinessObjects Enterprise 3.1 , Crystal Reports 2008, SAP GUI 7.1 and SAP Integration Kit on this new server nam

  • Error in activating tabels in SPDD

    Hi, We are in SPDD phase in upgrade.While i have added new Append structures in table MARC and activating it its givving error table is not activate and if i cheked syntax check it is showing no inconsitncies Please help how to activate. Regards, Sun

  • Re: Excise invoice for Other Movements (T-code-J1IV)

    Hi, In the T-code J1IV for the script there are 2 print programs. My requiremnt is to assign a customized script n use it. But for the standard script used in J1IV T-code there are 2 print programs assignd for it. <b>To retrive data n display in the

  • Can I find out the peak of Output 1-2 without having to play whole track?

    Can I find out the peak of Output 1-2 without having to play whole track? I am preparing my album for mastering and I was told to have each track peak at no more than -2dB. Is there an offline peak detector or maybe another trick people use?

  • Editing Selection of items from F110 Payment Run

    Have a requirement to limit the selection of documents from the Payment run for a specific payment method to those items based on fields on the Sales Order and Sales order Billing Document For example, VBAK-KVGR1 = 'AE' .   Is anyone aware of a user