Link Personnal Data from ESS with Employee Search from MSS
Hi all,
I would like to know if it is possible to create an iVew with on the top the "employee search engine" and on the bottom the "Personnal Data" from ESS package ?
Why that ? With the standard of MSS, I can change the personnal data from a specific employee through :
Team->General Information -> Related Links (Identity) and then I got a Popup with the ability to modify the personnal data.
I would like the same but in one iView and one click.
Is it possible ?
Thanks
When you select/click on an employee in the Employee search iview, an event is raised which is subscribed in all the iviews below the employee search in that page. This is how the update happens in the other iviews.
If you would like to put Employee Search iview at the top and personal data (From ESS) at the bottom, you will need to make changes in the personal data application of ESS and subscribe the event raised by the Employee Search.
Basically you can integrate any custom iview with the employee search iview.
Have a look at the following Wiki:
http://wiki.sdn.sap.com/wiki/display/profile/How-toaddacustomWebDynproiViewtotheMSSEmployeeProfile(ECC+6.0)
Also check SAP Note 1112733.
Thanks,
Shanti
Similar Messages
-
Employee Search in MSS Approve Time Sheet Data
Employee Search in MSS Approve Time Sheet Data (Net Weaver Portal 2004s)
In MSS we need upper level managers to be able to approve time for employees who reside in lower level org units and are not the managers direct reports. This is usually the case when the chief the employees do report to directly is absent.
In the MSS Team view the links General Information, Compensation Information and Personnel Development have an Employee Search iView with a dropdown containing options for Direct Reports, Employees from Organizational Structure, Employees from Organizational Units and Employee Search. We have been told that in previous versions of MSS that functionality existed in the Approve Time Sheet Data iView as well which would appear to solve our problem.
Is this functionality available in Approve Time Sheet Data and if so how is it configured? Or is there another way (other than manipulating the org structure) for managers to view non-direct reports and approve their time?Hi Mani,
It is a good thing you have found this post, as it demonstrates that you put in some effort to search for similar posts to your problem.
However, if the post you found is like 3 years old and there are no replies, chances are the guy did not find a solution or isn't visiting here anymore. So it might be a good idea to raise a new post, to increase you chances of getting some answers. -
Employee Search in MSS(ERP 2005)
Hi all,
I was looking at the employee search functionality in MSS (erp2005) which has a drop down box with four values:
--Direct Reports
--Employee from Organization structure
--Employee from organization unit
--Employee Search
How is this drop down box getting populated with these values? Is it configured in the IMG? OR is it getting this list from any function module?
I am developing a custom web dynpro application which has a drop down box and the values should be the same as above. So,
was wondering if there is any function module which I can reuse to populate my drop down.
Any clues?
Thanks.Technical Data
Technical Names of iViews
● com.sap.pct.erp.mss.employeesearch_geinfo
● com.sap.pct.erp.mss.employeesearch_coinfo
● com.sap.pct.erp.mss.teamviewer_persdev
Technical Names of Web Dynpro Applications
● sap.com/mss~eepro/GeneralInformation
● sap.com/mss~eepro/CompensationInformation
● sap.com/mss~eepro/PersonnelDevelopment
Available From SAP NetWeaver 2004s
Data Source: SAP ECC 6.0 or above
RFC function modules called: function modules of the function group HRWPC_OADP_UI
Software Component: SAP_HR, EA-HR
Support: EP-PCT-MGR-HR -
Send a message from outlook with your pin from your blackberry
is the a way to send a message from outlook with your pin from your blackberry
I want to input my friends pin in outlook and send a message that way.Sorry, there is not.
PIN communication is for messaging between BlackBerry devices.
You might try this desktop browser site to send a PIN message, it was working at one time.
http://www.web2pin.com/web2pinfree.aspx
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to prevent images from loading with google search results?
Since I updated to FireFox 18 I have been getting images (miniature webpages) with my search results with Google. I thought it was a google problem but I don't have the problem in IE.
Please advise.I think you are using some addons, try in safemode...
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Employee search in MSS Team view
Hi,
Our requirement is to add a new criteria (employee by cost center) to the search criteria drop down in MSS Team view.
I have done the following steps in Object and Data provider node in spro-
u2022 Define rules for object selection
u2022 Define object selection
u2022 Define organizational structure views
u2022 Group organizational structure views
The new criteria is now visible in the dropdown, but on selecting the dropdown value no fields for input of cost center are displayed. Are there any settings that need to be done to define the input fields? If yes, what are these settings and where do I do them?
TIA.Hi Diana,
Now I see the problem. And I dont think it is possible.
I recoment you to look at class CL_HRWPC_SEARCH_VIA_SELID. This class used by MSS for employee search. You can see it in IMG Define object selection. Copy and try modify it or find ther class you can use. I hope will work without any modification in NWDS.
All I did was definition rules for object selection where I put my FM for object selection. I did not enter any values the searsh was in the FM.
Evgeny -
Employee search in MSS has an issue
Hi,
I' am logging into SAP Portal through a id who is a manager as per the configuration done in ECC and access Personnel change request iview under which I have 2 views 1) Employee search and 2) Direct reports.
When I select Direct reports am able to get the list of employees who reports to the manager but when I go to Employee search option and try to search through personnel number or last-name or first-name (of any employee who is displayed under direct reports) it is giving the message as no data found.
Can anyone help me in getting this resolved.
Regards,
PradeepHi Siddharth,
Actually we assigned SAP_ALL and SAP_NEW profiles too for the user.
We are on SAP NW Portal 7.0 SP15 and SAP ECC Release 700 and SP15
We have this scenario working in dev and prod environments only in Q it is not working -
How can I combine animation from Flash with a video from Photoshop to make a movie?
I have a project that's due tomorrow. I had to create a motion tween and animation and record a video to put in it, which I have done both already. My question here is, how can I combine my animation from flash and my video from Photoshop to make it into one movie?
No, I am saying that this isn't the forum for help with that. This forum is for Firefox user support, and the helpers in this forum aren't versed in development issues like that - we're volunteers, not Mozilla developers and don't work for Mozilla. You are better off asking about that in a forum where other web site developers do support.
-
Dates not coming with photos imported from shared libraries
My partner and i both have macs, we both use iphoto. Usually we use the shared photo library features to exchange photos so that we both have all the photos we want.
The problem is that the dates don't follow. I'd actually like to see all the metadata imported (faces etc) but i'll live without that but the dates is a real problem.
I'm pretty sure they used to come with the photos imported from shared libraries, not sure why they stopped... Ideas?How are you sharing the Libraries? How are you reading the dates?
Regards
TD -
LInking a User Defind Field with formatted search
Hi!, I created a user defined field called subcategory in the items master data. The field is link to a subcategory table.
But the subcategory is dependant on the item's category or group. So is there a way to filter this, so the user can only select subcategories of the current item category (group)
Thank you!Thank you for your reply, it has 3 fields.
The Category Code
The SubCategory Code
The Description for the SubCategory
The Category Code its actually the ItmsGrpCod for the Item, the subcategory code its arbitrary defined and unique for each category. -
Cannot sync my iphone from itunes with app got from apple store
Hello everyone, I wonder if someone can help me...
I dwonloaded a free app from the apple store.
My computer is authorized to do thisbut it keep on saying that it's not authorized and in order to transfer the app to the iphone I have to authorize it. Which I do and then I get the window with something like "with this computer you have 2 computers authorized". But when I try and sync the app, it comes again "your computer is not authorized.....".
One minute it's authorized and the next minute it's not...
I also followed the website instructions deauthorizing several times and in the end authorise it.
The computer - even when it says it's authorised - can't seam to sync the application...
Anyone????
THANKS A LOT!
MariaAMDS for Mac
http://support.apple.com/kb/ht1747
AMDS for Windows
http://support.apple.com/kb/TS1567 -
Securing your Email from SAP with security signatures from exchange server
Hello
I have been exploring a solution for the following requirement:
Important Emails such as HR payslips which are being generated from SAP need to be encrypted using security signatures stored at an exchange server.
I have looked at Secure email proxy but I believe that is a more standard functionality, the payslips are being generated, being converted into pdfs and are being sent as an attachment in emails,all custom coding.
Is there a way to utilize the secure email proxy feature using custom code?
Are there other ways to use the existing signatures at the exchange server. Help.sap.com also mentions a badi - SX_secure_email - would this suffice for my needs?
Thank youGenerating the request with a particular user who has the parameter set to on gets the trick done.
-
Mozilla Firefox is my default browser. Whenever I try to listen to the audio on a video, parts of some old audio from a previous video interfere. I still maintain my Microsoft Explorer browser and I do not experience that problem with it. The only reason I use Firefox is that it supports some games on Facebook which apparently Microsoft Explorer does not.
Thanks guys. Both options worked. Dowside to deleting audio (option I went with) appears to be that you lose the audio forever. So if I ever wanted to bring the audio back I wouldn't be able to.
You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
With using the audio mixer it appeared I had to mute each clip separately. When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
Any way to use the audio mixer to mute the clips in mass?
See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
Hunt -
Transport table entries directly from table with field added from append S
Hi
Guys, I have changes one standard table , I mean I use append structure and add a new field in to that . As this is T* ( text table ) , it also V ( view ) but as I change the field in T* table . I went in to table and maintain entries directly into table . After that I go to menu and select all the entries and as I want to push it to my test client . I create the entries and then I transport it to test . When I saw the table that entries were missing. Then I saw my existing transport in SE10 & SE09 and I notice it just transport the Keys fields content and its not transporting the new field content which I add as append structure .
Do you guys have any idea .how to transport those entries?
Cheers
UsmanItll behave in the same way , even you give "*" in your transport . Do one thing go to table, double click on your structure and once youre in structure <b>Go to->Extras->Enhancement category
And select radio button 1 or 2 and try again </b>
Hope thisll give you idea!!
<b>Pl... award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise" -
Employee search iview integration into Detailed navigation
EP7
ESS/MSS 600
ECC6
Hello,
In the EP6 version of the TeamViewer it was easily added to the "Detailed Navigation" part of the page. Does anyone know how to achieve this in EP7 with Employee Search?
thx
LarryAny iViews can be added to the navigation panel. All you need to do is add them to another iView or page as either a related link or as a dynamic navigation. The related links appear under a section in the navigation panel called "related links", Dynamic navigation iViews appear with their proper name in the navigation panel.
Cheers
Maybe you are looking for
-
Precompiled JSP not taken in account by Weblogic 10.3.1
Hi My JSPs are properly precompiled in my ear, and well taken in account by weblogic when I work with my local environment. But if I upload my ear on the Unix server, they're not taken in account anymore. Weblogic compiles them in real time, that cau
-
My 3rd Generation Ipod Touch (32 gigabytes) will not turn on or connect with iTunes
I set my ipod down, it was at near full battery, when I tried to unlock my ipod again, the screen stayed black. I tried holding down the lock button. Holding down both the lock button and the home button, and I tried connecting it to iTunes (nothing
-
Any great Javascript training available online?
Hi, I am an artist who appreciates the awesome power of Javascript, and I have come to realize how great it would be to become proficient in it. I wanted to ask this community: 1. Can you recommend any really excellent Javascript training for beginne
-
[JS] Date Variable in File Path
Hello, I have simple script that is placing files on to the page. var myDate = new Date(); var myDay=myDate.getDate(); var myMonth=myDate.getMonth() + 1; var myYear=myDate.getFullYear(); var myTotal = myDay + "/" + myMonth + "/" + myYear; var myDoc =
-
Hello Friends, I am new to SDN and would like to know something. I want to print special german characters via SAP like 2 dots on alphabet A and O. How can I get those printed on the document. Currently these special characters are not printed but a