Link problem since firmware upgrade

Hi,
Just upgraded to latest firmware on ix4-300d, link doesn't work anymore!!!
Any idea?
Thanks
Solved!
Go to Solution.

Are you using the old Iomega Link or the new LenovoEMC Link? I would recommend downloading the LenovoEMC link if you haven't: LenovoEMC Link iOS and Android application
Have you enabled port forwarding on your router? You might need to. Check to make sure that the ports are forwarded correctly: Why can't I connect remotely to my Iomega device or Personal Cloud from my Iomega Link App?
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

I chat problem since Leopard upgrade.

I recently upgraded to Leopard, now i chat has an issue. When I click on a buddy, a window opens with my icon and a bubble, however when I type and hit return I see nothing. In addition when my buddy responds I see his/hers icon and bubble briefly then it disappears with no text.

I've been having this same problem since I upgraded to Leopard. Also my buddy list is grey and displays all my contacts online or not. The privacy features also are not accessible and say that I can't change them because I am not logged in, but I am logged in according to the main screen. I am behind a netgear router most of the time and connect wirelessly to an airport express. My provider is Comcast. I have changed the port to 443, tried the fix listed here, tried to fix it using onyx, and I'm sure more. At this point I am using Adium because I can't get iChat to work. I want to use iChat as I really like the new features and it was one of the reasons I upgraded to Leopard in the first place.

WAP321 Dropping Connection since firmware Upgrade

MyWAP321 is dropping connections at least once a day since upgradiing to firmware 1.0.1.10. before the upgrade I had no problems and I have another WAP321 with firmware 1.0.0.3 that never drops connection. Is anybody else having this problem since upgrading?

Hi ,
Ive just installed this WAP 321 wiht Radius server authentication.
I have the firmware version 1.0.2.3 and this WAP is now having Connection dropout and dosent connect again.
I have to do re try for several times and again it starts working.
Please see the log and advice me what is happeing inside it and why this connection is not staying persistent with the associated wireless clients.
Jun 9 2013 20:07:25
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:36
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:36
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:35
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:35
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:17
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:17
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:16
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:16
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:56
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:56
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:53
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:53
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:22
info
hostapd[1241]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:59:22
info
hostapd[1241]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:59:22
info
hostapd[1241]
EAP authentication with the authentication server completed
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:59:21
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:21
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:20
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:20
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:18
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:18
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:57:27
info
hostapd[1106]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:57:27
info
hostapd[1106]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:57:27
info
hostapd[1106]
EAP authentication with the authentication server completed
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS

WRT610N problems after firmware upgrade to 1.00.03.15

I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.

rverscho wrote:
I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.
Try setting 5GHz network as "Wireless-N only" instead of MIXED. That should help resolve this issue.

Nothing but problems since recent upgrade to Infin...

I recently upgraded to BT Infinity. Previously I had a wireless connection throughout the house. Since the upgrade I have had quite a lot of problems. The hub is now in a different room than with the previous BB. I found that;
1) Wireless not available in a few rooms
2) Internet connection keeps switching off on laptop + PC
I purchased a booster as advised by BT. This helps at times but then I realized that not all my issues were down to the wireless connection. I realize many different devices can interfere with the connection but prior to Infinity everything was fine. This is the only change in my house. There has been no new electrical devices.
Now the following happens;
a) Internet connection keeps going down on various devices - particularly at 11pm at night
b) At times I cannot even connect with an ethernet cable from hub to laptop
c) At times speedtest shows poor results
I've had various ideas suggested by the BT employee who is attached to my case, unfortunately nothing has improved the situation and I am getting extremely frustrated with the problem. The following has been done;
1) My hub has been replaced
2) Channels reset
3) Engineer has tried to remotely fix problem and also replaced some part of copper wire leading into house
BT have recently sent me 2 powerline adaptors to try and set my hub away from the openreach box in the room it was in previously as I had no problems prior to the upgrade. Unfortunatelly BT have been unable to talk me through this and obtain a broadband connection. The BT employee is trying to set it up differently from the conventional way which he said has worked for customers before. I am awaiting the original employee to telephone me back in a few days as he is off work and his colleagues are not sure of the set up.
I am also awaiting yet another Openreach engineer to call in a few days if the problem cannot be resolved.
Initially for the first few weeks it was a complete nightmare contacting BT and having to keep repeating my story and having various employees reset channels and work their way through a set script. However recently a set person seems to have been assigned to this case and has been very dilligently phoning me and trying to resolve the problem. This is the only thing that has kept me sane as I was getting so annoyed by having to phone and take potluck with their general phone number.
I would be pleased to hear from anyone with similar problems or suggestions to resolve this.
Many thanks.

Hi
I am sorry to see you are having problems
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Zen Nano Plus - Connection Problems and Firmware Upgrade probl

Like many others posting on this forum, for a while I had problems trying to get my GB Zen Nano Plus to be recognized by the .0.03 Firmware Update software.
I eventually got it by doing this:
While the Firmware Update software was "Searching" for a device, I kept on unplugging and plugging in the Zen Nano Plus from the USB cable while holding down the Play button, unti it "caught". I tried this since I noticed it would initially see the unit saying "A device has been detected in recovery mode...", but then throw the unit into "non-recovery" mode and hence force the Firmware Update software to keep on searching.
Anyhoo, after it did finally "catch" it (after about 0 times unplugging/plugging while holding the Play button down), it showed my firmware as .03.02, and so I did the upgrade to .0.03. The upgrade said "Complete". I then take the unit off of USB, and put my battery back in. and. uhm. well. Now it won't turn on at all. *sigh*
So there I go again in the "unplug-plug" loop on trying to get the older .03.02. Finally caught after about 30 times (yes my hands are tired). And after downgrading to .03.02, putting the battery back in, the unit turns on fine.. WHEW.
So, beware to everyone. Not sure if I'd trust the .0.03 Firmware. Doesnt seem to work on my Zen Nano Plus, and I JUST bought the thing from Circuit City about a week ago.
And for those of you having problems getting the Firmware Upgrade to work.. try my (tiring) method.
I tried this on my Dell D600 laptop (actually used the USB ports on the docking station).
-taka

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

Hdmi sound problem since videocard upgrade to R9 290x.

Hello
i recently upgraded my videocard from Radeon 6870 to R9 290x. Since the upgrade the hdmi audio playback sound realy delayed und noisy.
aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: SB [HDA ATI SB], Gerät 0: ALC889 Analog [ALC889 Analog]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
Karte 0: SB [HDA ATI SB], Gerät 1: ALC889 Digital [ALC889 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 7: HDMI 1 [HDMI 1]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 8: HDMI 2 [HDMI 2]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 9: HDMI 3 [HDMI 3]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 10: HDMI 4 [HDMI 4]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: Generic [HD-Audio Generic], Gerät 11: HDMI 5 [HDMI 5]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
lspci -v |grep Audio
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aac8
cat /proc/asound/card*/code*|grep Codec
Codec: Realtek ALC889
Codec: ATI R6xx HDMI
Some one with the same problem here?

Hubrisnxs wrote:
Ahhhhh, Most tv's have a couple or more, you may want to try Component cables then, You can call Verizon or open a live chat, they may send you some for free, or they may point you towards their website www.verizon.com/fiosaccessories
I'd open a live chat and see if I could get them for free personally, but they are also very cheap at www.amazon.com
They are HD cables that support upto 1080p
GEEZ, I can't be the only person having this issue. I will try 1 call to them to see what they say. Thanks for your input.

Cooler running since firmware upgrade

Has any body else noticed a significant decrease in running temps since the firmware upgrade? I can now use it as a LAP top computer, whereas before it reguired a cooling pad just to use.
17" MacBook Pro
G4 1 Gig - Digital Audio Mac OS X (10.4.6)

Like tcdm said, the timer is based on the rate of drainage at that particular moment. Think of the timer being like the battery indicator of the ipod. On hard drive-based ipods, the battery indicator can tend to make a quick plummet when accessing music or larger files like movies. The battery is basically telling you how much is left based on the rate of power usage at that particular moment, but then when the hard disk stops spinning the indicator jumps back up with just a little taken away. If you see 5 hours at one moment, accessing large files(which kicks the HDD into motion) will suddenly put you at a little less. I set a stop watch on my macbook while it played a movie in MPEG-4 format. after playing movies continuously from full charge to near empty i got about 4 hours (roughly 3:53 by my watch) I count the time from full charge to the moment i get the first battery low warning. after that its just a few minutes before the computer sleeps to decrease the rate of power usage. So far no big changes as far as i can see, I think this firmware update mostly addresses the issue regarding the cooling system readings rather than energy efficiency, but who knows.

Lost Connections have recently become a problem since I upgraded

My sister and I call each other frequently from the same general location, and recently (since I upgraded) we drop connection seconds after the call starts). I believe there may be a problem with the phone part of the new software. Everything else is working well. I do wish it would work better as a phone. I mean that is what I bought it for.
The problem seems to happen when she calls using her old version of the software, to me running the new version. When I try to call back, it goes right into voicemail.

To be honest these are the solutions that may or may not work.
First thing I would try is rebooting the phone by holding the sleep/wake button and home button for 15 seconds until you see the white apple logo.
If that doesn't work I would restore from backup. If that doesn't work I would restore as new. If all else fails take it to your closest apple store they may replace the phone for a working one..

IPad Problem Since Last Upgrade

Since last upgrade, safari will just shut down, for no apparent reason. Very irritating! Thoughts? Suggestions?
I also have problems in FB with it showing Access Denied ... On some videos. Never had this before.

restart the ipad http://support.apple.com/kb/ht1430
restart the appletv
restart the router

E66 GPS problem after firmware upgrade to v.500

hi there, sorry but im going crazy with this problem....
id like to know who has a nokia e66, performed the v.500 upgrade and has GPS that doesn't work anymore after doing the upgrade, am i the only one?? what did the new upgrade changed? how to fix this??? i did all i could think of.. format memory card, reset phone, reinstall firmware etc etc. before upgrade it was working like a charm, getting signal fast and all. tried to enable and disable a-positioning, etc etc, resetted, removed battery etc etc.... and i upgraded the firmware with Nokia Ovi Suite for the note.. so the "good" stuff.
gabrio

famous007 wrote:
Hi I am also having the same problem. I upgraded my firmware to version 500.21.009 and my gps is not working. Anyone has a solution to this problem. Will the latest firmware upgrade resolve this issue?
@famous007
Presumably you have this version of Ovi Maps installed upon your E66:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-e66/
If you go to Menu > Tools > Settings > General > Positioning > Positioning methods - try temporarily disabling all except Integrated GPS, go outside away from tall buildings if feasible launch Ovi Maps and wait 20 - 30 minutes for first positional fix to be established.
Happy to have helped forum with a Support Ratio = 42.5

Nokia 5800 XM: Problems after firmware upgrade

Hello all,
I upgraded my firmware to V 50.0.005, cause that's what Ovi store told me to do in order to download ovi maps.
However, now, when I open my internet browser it automatically opens full screen which is really not my preference. But when I click "options" it just shuts down.
Also when I enter Ovi store now, at first it seems fine but after loading an app page it crashes saying no more than "Something went wrong".
Thanks in advance for your help.

Hello, I'm afraid I don't have an anser to this, but I too appear to have the same problem. After upgrading to v 50.0.005 I get the following problems relating to web browsing. 1. If I attempt to download anything I get the following error :- Script alert: A critical internal service has failed. after which I click on OK and the browser/application shuts down (and the connection closes). This happens when web browsing e.g. when attempting to download a BBC podcast or using the Ovi Store application to download something. Also it happens whether I'm using my provider's 3G network or a wireless network. 2. If in the browser I click on "options" the browser shuts down. I admit that in order to get Ovi Maps I have previously debranded my phone in order to get the necessary firmware updates, but I haven't had this problem with any of the previous ones. FWIW the Ovi Maps application appears to work well and manage to keep the internet connection up for a long period when online. Does anyone else have this problem? Can anyone suggest anything or will we simply have to hape that the next firmware update comes quickly and cures the problem? Thanks in advance.

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

HDMI output not working since firmware upgrade

I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
Any troubleshooting suggestions would be appreciated.

Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
- SD Card: total space - 5.43GB; Available space - 5.43GB
- Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
- System storage: Total Space - .97 GB; Available space - .59GB
In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

Time capsule problems since Maverick upgrade

Maverick forced an upgrade from Airport Utility 5.6 to the latest version. I am now unable to connect via wifi. I stayed with Airport 5.6 throughout previous upgrades because it allowed me to easily convert between ethernet and wifi. I back up large sized photos which would take forever using wifi. I upgraded to Maverick when I was connected to time capsule through an ethernet connection and can't get back to wifi. In the process of making this work, time capsule created a new wireless network which I cannot figure out how to delete. I rebooted time capsule several times - ethernet works, but wifi does not. Any and all suggestions are welcome.
Thank you.
MacBook Pro
OS X 10.9

Why does the backup from the latest OS X Mavericks time machine fail with the latest firmware upgrade of Time Machine?
"Why", we'll probably never know except to mention that Mavericks appears to be a bug ridden operating system, particularly with Time Machine and corrupted back ups.
I would suggest that you try Pondini's Time Machine --- Troubleshooting to see if that will help get things going again.
http://pondini.org/TM/Troubleshooting.html
In particular, see #C10.

Link problem since firmware upgrade

Similar Messages

Maybe you are looking for