Link Problem with port 2 in WLC 4402
Hi,
I have a problem with port 2 in Wireless Lan Controler 4402. The problem is that the distribution port 2 of the WLC not link with the switch (3750). We receive the WLC and we follow the autostart wizard and we enable LAG. The wizard finish, I restart the system and all works fine. The two distribution ports of WLC, 1 and 2 appears UP and the LAG works correctly. After this we upgrade the firmware of the WLC to the version AIR-WLC4400-k9-6-0-182-0.aes and we restart the system again but at this time port 2 does not link and port 1 link OK. We do not know the reason why port 2 doesn´t link? Could you help me ?
Thank in advance.
Regards.
Does it properly refuse authentication ? Or does the login page stop appearing or something ?
There was a bug with the webauth dying under heavy load, regardless of number of identical accounts used.
One good way for you to check would be, when problem occurs, to create a second backup guest user and see if that would start working. If it doesn't, the account is not the problem.
I'm not aware of any maximum of usage of the same account.
Which 4.2 exactly are you running ?
Similar Messages
-
Problem with certificate authentication at wlc 4402
Hi,
we have a problem to get a connection from the client to the WLC.
we are using Cisco Aironet 1130 AG and a Cisco 4402 WLC in our network. The certificate service is installed on a Windows 2008 R2 server. We use a standalone Root CA with a Enterprise Sub CA hierarchy. Issueing certificates to clients works fine. The vendor and ca certificates are installed on the WLC and the user have his user certificate. During implementation we used following document: "http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml#wlc". Instead of Anonymous Bind, we use a service user to read in AD (works fine, too).
We use the Intel/PRO wireless utility on our Testclient and configured it for EAP-FAST and TLS. We can select the installed certificate in the utility, but when we try to connect, the utility throw the message: "Authentication failed due to an invalid certificate".
We´ve logged the WLC and thats a part of the logfile (i´ve greyed out all enterprise data):
*EAP Framework: Jan 18 12:08:21.921: EAP-AUTH-EVENT: Waiting for asynchronous reply from LL
*LDAP DB Task 1: Jan 18 12:08:21.921: ldapTask [1] received msg 'REQUEST' (2) in state 'IDLE' (1)
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP server 1 changed state to INIT
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP_OPT_REFERRALS = -1*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP_CLIENT: UID Search (...)))
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: ldap_search_ext_s returns 0 85
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned 2 msgs including 0 references
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned msg 1 type 0x64
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Received 1 attributes in search entry msg
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Returned msg 2 type 0x65
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : No matched DN
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : Check result error 0 rc 1013
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Received no referrals in search result msg
*LDAP DB Task 1: Jan 18 12:08:21.927: ldapAuthRequest [1] called lcapi_query base="..." (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP ATTR> dn = CN=... (size 76)
*LDAP DB Task 1: Jan 18 12:08:21.927: Handling LDAP response Success
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc [Response] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc Returning AAA Success for mobile 18:3d:a2:0a:ec:bc
*LDAP DB Task 1: Jan 18 12:08:21.927: AuthorizationResponse: 0x33a5affc*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: Found context matching MAC address - 319
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: (EAP:319) User credential callback invoked
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find password in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find wlan in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: Authenticated bind : Closing the binded session*LDAP DB Task 1: Jan 18 12:08:21.928: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.929: LDAP server 1 changed state to IDLE
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Received event 'EAP_LL_REPLY' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Using credential profile name: ...(0x78000041)
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Maximum EAP packet size: 1000
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Sending method new context directive for EAP context 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Sending method directive 'New Context' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: eap_fast.c-EVENT: New context (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: id_manager.c-AUTH-SM: Got new ID f700000e - id_get
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-EVENT: Allocated new EAP-FAST context (handle = 0xF700000E)
*EAP Framework: Jan 18 12:08:21.931: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:21.931: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Received Identity
*EAP Framework: Jan 18 12:08:21.931: eap_fast_tlv.c-AUTH-EVENT: Adding PAC A-ID TLV (436973636f0000000000000000000000)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Sending Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-SM: Changing state: Reset -> Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:138: Version: 1 Flags:S Length:0x0014
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1422: Payload: 00040010436973636F00000000000000 ...
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1484: Code:REQUEST ID:0x 2 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:21.932: AuthorizationResponse: 0x13c713fc*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 1a
*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 2) to EAP subsys
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Start
*EAP
Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending lower layer event
'EAP_GET_CREDENTIAL_PROFILE_FROM_PROFILE_NAME' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: Found matching context for id - 319
*EAP
Framework: Jan 18 12:08:22.292: LOCAL_AUTH: (EAP:319) Returning profile
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - New session 0x335ee108 started (TP = 'vendor')
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - Trustpoint identity (cert) set to 'Vendor'
*EAP
Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Subject : ...
*EAP Framework: Jan 18
12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Issuer : ...
*EAP Framework: Jan 18
12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Valid from '2012 Jan 12th,
17:06:50 GMT' to '2016 Jan 11th, 17:06:50 GMT'
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Is not a CA cert
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: Added cert (type 1) to chain (1 present on chain)
*EAP
Framework: Jan 18 12:08:22.300: IOS_PKI_SHIM: [CA-CERT] Subject :
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Issuer : CN=...
*EAP
Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Valid from
'2012 Jan 12th, 16:54:49 GMT' to '2020 Jan 12th, 17:04:49 GMT'
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Is a CA cert
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: Added cert (type 2) to chain (2 present on chain)
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [StartSession] - Getting older style priv key
*EAP Framework: Jan 18 12:08:22.338: IOS_PKI_SHIM: Session 0x335ee108 init'd OK
*EAP Framework: Jan 18 12:08:22.338: eap_fast_auth.c-AUTH-EVENT: Local certificate found
*EAP Framework: Jan 18 12:08:22.339: eap_fast_auth.c-AUTH-EVENT: Reading Client Hello handshake
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0033
*EAP Framework: Jan 18 12:08:22.339: eap_core.c:1422: Payload: 0100002F03014F16A8262631FC9DC042 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast.c:202: Handshake type:Client Hello Length:0x002F
*EAP Framework: Jan 18 12:08:22.340: eap_core.c:1422: Payload: 03014F16A8262631FC9DC042253D3E24 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_AES_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_RC4_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: Proposed ciphersuite(s):
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_RC4_128_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: Selected ciphersuite:
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast_auth.c-AUTH-EVENT: Building Provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:255: Content:Handshake Version:0301 Length:0x002A
*EAP Framework: Jan 18 12:08:22.344: eap_core.c:1422: Payload: 0200002603015F3325EADF12E6296F91 ...
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:202: Handshake type:Server Hello Length:0x0026
*EAP Framework: Jan 18 12:08:22.345: eap_core.c:1422: Payload: 03015F3325EADF12E6296F91530FE67F ...
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0B54
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 0B000B50000B4D00059F3082059B3082 ...
*EAP Framework: Jan 18 12:08:22.346: eap_fast.c:202: Handshake type:Certificate Length:0x0B50
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 000B4D00059F3082059B30820483A003 ...
*EAP Framework: Jan 18 12:08:22.347: eap_fast_crypto.c-EVENT: Starting Diffie Hellman phase 1 ...
*EAP Framework: Jan 18 12:08:22.661: eap_fast_crypto.c-EVENT: Diffie Hellman phase 1 complete
*EAP Framework: Jan 18 12:08:22.677: IOS_PKI_SHIM: PKI_SignMessage PostHashEncrypt ret SUCCESS.. op_len 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast_auth.c-AUTH-EVENT: DH signature length = 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:255: Content:Handshake Version:0301 Length:0x028D
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0C0002890100FFFFFFFFFFFFFFFFC90F ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:202: Handshake type:Server Key Exchange Length:0x0289
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0100FFFFFFFFFFFFFFFFC90FDAA22168 ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:255: Content:Handshake Version:0301 Length:0x000B
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 0D00000704030401020000
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:202: Handshake type:Certificate Request Length:0x0007
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 04030401020000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0004
*EAP Framework: Jan 18 12:08:22.681: eap_core.c:1422: Payload: 0E000000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:202: Handshake type:Server Done Length:0x0000
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-EVENT: Sending Provisioning Serving Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-SM: Changing state: Start -> Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast.c-EVENT: Tx packet fragmentation required
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:138: Version: 1 Flags:LM Length:0x03DE
*EAP Framework: Jan 18 12:08:22.683: eap_core.c:1422: Payload: 160301002A0200002603015F3325EADF ...
*EAP Framework: Jan 18 12:08:22.684: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.684: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.685: eap_core.c:1484: Code:REQUEST ID:0x 3 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.686: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.687: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.687: AuthorizationResponse: 0x13c713fc*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 297
*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 6) to EAP subsys
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP
Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Received
TLS record type: Handshake in state: Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Reading Client Certificate handshake
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0007
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 0B000003000000
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:202: Handshake type:Certificate Length:0x0003
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 000000
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:255: Content:Alert Version:0301 Length:0x0002
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 0228
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-SM: Changing state: Sent provisioning Server Hello -> Alert
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:138: Version: 1 Flags:L Length:0x0007
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 15030100020228
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.833: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: EAP method decision: Fail
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1484: Code:REQUEST ID:0x 7 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.834: AuthorizationResponse: 0x13c713fc
We think that the reason why it didn´t work, is the part:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
But we aren´t sure.
Maybe anyone can help us. Many thanks in advance.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.01.18 12:08:18 =~=~=~=~=~=~=~=~=~=~=~=
debug aaa all disable debug aaa all enable(Cisco Controller) >*Dot1x_NW_MsgTask_0: Jan 18 12:08:21.917: 18:3d:a2:0a:ec:bc Audit Session ID added to the mscb: 0a63081e000000994f16a825
*Dot1x_NW_MsgTask_0: Jan 18 12:08:21.917: Creating audit session ID (dot1x_aaa_eapresp_supp) and Radius Request
*aaaQueueReader: Jan 18 12:08:21.917: AuthenticationRequest: 0x30b52e90
*aaaQueueReader: Jan 18 12:08:21.917: Callback.....................................0x10b7803c*aaaQueueReader: Jan 18 12:08:21.917: protocolType.................................0x00140001*aaaQueueReader: Jan 18 12:08:21.917: proxyState...................................18:3D:A2:0A:EC:BC-02:00*aaaQueueReader: Jan 18 12:08:21.917: Packet contains 16 AVPs (not shown)*aaaQueueReader: Jan 18 12:08:21.917: 18:3d:a2:0a:ec:bc [Error] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
*aaaQueueReader: Jan 18 12:08:21.918: 18:3d:a2:0a:ec:bc Returning AAA Error 'No Server' (-7) for mobile 18:3d:a2:0a:ec:bc
*aaaQueueReader: Jan 18 12:08:21.918: AuthorizationResponse: 0x3e04bd08
*aaaQueueReader: Jan 18 12:08:21.918: structureSize................................32*aaaQueueReader: Jan 18 12:08:21.918: resultCode...................................-7*aaaQueueReader: Jan 18 12:08:21.918: protocolUsed.................................0xffffffff*aaaQueueReader: Jan 18 12:08:21.918: proxyState...................................18:3D:A2:0A:EC:BC-02:00*aaaQueueReader: Jan 18 12:08:21.918: Packet contains 0 AVPs:*aaaQueueReader: Jan 18 12:08:21.918: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:21.918: LOCAL_AUTH: Creating new context
*aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Received context create from lower layer (0x0000013F)
*aaaQueueReader: Jan 18 12:08:21.918: id_manager.c-AUTH-SM: Got new ID 78000041 - id_get
*aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Received credential profile name: "(null)" from LL
*aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Allocated new EAP context (handle = 0x78000041)
*aaaQueueReader: Jan 18 12:08:21.919: LOCAL_AUTH: Created new context eap session handle 78000041
*aaaQueueReader: Jan 18 12:08:21.919: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 1) to EAP subsys
*EAP Framework: Jan 18 12:08:21.919: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:21.920: eap_core.c:1484: Code:RESPONSE ID:0x 1 Length:0x002b Type:IDENTITY
*EAP Framework: Jan 18 12:08:21.920: eap_core.c:1422: Payload: 416E6472652E54736368656E74736368 ...
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: EAP Response type = Identity
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: Received peer identity: [email protected]
*EAP Framework: Jan 18 12:08:21.920: EAP-EVENT: Sending lower layer event 'EAP_GET_CREDENTIAL_PROFILE_FROM_USERNAME' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.920: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:21.921: LOCAL_AUTH: (EAP) Sending user credential request username '[email protected]' to LDAP
*aaaQueueReader: Jan 18 12:08:21.921: AuthenticationRequest: 0x33a6ae18
*aaaQueueReader: Jan 18 12:08:21.921: Callback.....................................0x10765234*aaaQueueReader: Jan 18 12:08:21.921: protocolType.................................0x00100002*aaaQueueReader: Jan 18 12:08:21.921: proxyState...................................18:3D:A2:0A:EC:BC-00:00*aaaQueueReader: Jan 18 12:08:21.921: Packet contains 2 AVPs (not shown)*EAP Framework: Jan 18 12:08:21.921: EAP-AUTH-EVENT: Waiting for asynchronous reply from LL
*LDAP DB Task 1: Jan 18 12:08:21.921: ldapTask [1] received msg 'REQUEST' (2) in state 'IDLE' (1)
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP server 1 changed state to INIT
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP_OPT_REFERRALS = -1*LDAP DB Task 1: Jan 18 12:08:21.922: ldapInitAndBind [1] called lcapi_init (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.925: ldapInitAndBind [1] configured Method Authenticated lcapi_bind (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP server 1 changed state to CONNECTED
*LDAP DB Task 1: Jan 18 12:08:21.925: disabled LDAP_OPT_REFERRALS*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP_CLIENT: UID Search (base=DC=group,DC=jenoptik,DC=corp, pattern=(&(objectclass=Person)([email protected])))
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: ldap_search_ext_s returns 0 85
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned 2 msgs including 0 references
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned msg 1 type 0x64
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Received 1 attributes in search entry msg
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Returned msg 2 type 0x65
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : No matched DN
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : Check result error 0 rc 1013
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Received no referrals in search result msg
*LDAP DB Task 1: Jan 18 12:08:21.927: ldapAuthRequest [1] called lcapi_query base="DC=group,DC=jenoptik,DC=corp" type="Person" attr="userPrincipalName" user="[email protected]" (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP ATTR> dn = CN=Tschentscher\, Andre,OU=Users,OU=SSC,OU=JOAG,DC=group,DC=jenoptik,DC=corp (size 76)
*LDAP DB Task 1: Jan 18 12:08:21.927: Handling LDAP response Success
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc [Response] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc Returning AAA Success for mobile 18:3d:a2:0a:ec:bc
*LDAP DB Task 1: Jan 18 12:08:21.927: AuthorizationResponse: 0x33a5affc
*LDAP DB Task 1: Jan 18 12:08:21.927: structureSize................................180*LDAP DB Task 1: Jan 18 12:08:21.927: resultCode...................................0*LDAP DB Task 1: Jan 18 12:08:21.927: protocolUsed.................................0x00000002*LDAP DB Task 1: Jan 18 12:08:21.927: proxyState...................................18:3D:A2:0A:EC:BC-00:00*LDAP DB Task 1: Jan 18 12:08:21.928: Packet contains 2 AVPs:*LDAP DB Task 1: Jan 18 12:08:21.928: AVP[01] Unknown Attribute 0......................CN=Tschentscher\, Andre,OU=Users,OU=SSC,OU=JOAG,DC=group,DC=jenoptik,DC=corp (76 bytes)*LDAP DB Task 1: Jan 18 12:08:21.928: AVP[02] User-Name................................Andre.Tschentscher@group.jenoptik.corp (38 bytes)*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: Found context matching MAC address - 319
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: (EAP:319) User credential callback invoked
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find password in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find wlan in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: Authenticated bind : Closing the binded session*LDAP DB Task 1: Jan 18 12:08:21.928: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.929: LDAP server 1 changed state to IDLE
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Received event 'EAP_LL_REPLY' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Using credential profile name: [email protected] (0x78000041)
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Maximum EAP packet size: 1000
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Sending method new context directive for EAP context 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Sending method directive 'New Context' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: eap_fast.c-EVENT: New context (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: id_manager.c-AUTH-SM: Got new ID f700000e - id_get
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-EVENT: Allocated new EAP-FAST context (handle = 0xF700000E)
*EAP Framework: Jan 18 12:08:21.931: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:21.931: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Received Identity
*EAP Framework: Jan 18 12:08:21.931: eap_fast_tlv.c-AUTH-EVENT: Adding PAC A-ID TLV (436973636f0000000000000000000000)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Sending Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-SM: Changing state: Reset -> Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:138: Version: 1 Flags:S Length:0x0014
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1422: Payload: 00040010436973636F00000000000000 ...
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1484: Code:REQUEST ID:0x 2 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:21.932: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:21.933: structureSize................................74*EAP Framework: Jan 18 12:08:21.933: resultCode...................................255*EAP Framework: Jan 18 12:08:21.933: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:21.933: proxyState...................................18:3D:A2:0A:EC:BC-02:00*EAP Framework: Jan 18 12:08:21.934: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 1a
*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 2) to EAP subsys
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Start
*EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending lower layer event 'EAP_GET_CREDENTIAL_PROFILE_FROM_PROFILE_NAME' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: (EAP:319) Returning profile '[email protected]' (username '[email protected]')
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - New session 0x335ee108 started (TP = 'vendor')
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - Trustpoint identity (cert) set to 'Vendor'
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Subject : C=DE, ST=Thuringia, L=Jena, O=Jenoptik AG, OU=Jenoptik SSC GmbH, CN=Cisco WLC 1st, [email protected]
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Issuer : DC=corp, DC=jenoptik, CN=Jenoptik WLAN Certificate Authority
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Valid from '2012 Jan 12th, 17:06:50 GMT' to '2016 Jan 11th, 17:06:50 GMT'
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Is not a CA cert
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: Added cert (type 1) to chain (1 present on chain)
*EAP Framework: Jan 18 12:08:22.300: IOS_PKI_SHIM: [CA-CERT] Subject : DC=corp, DC=jenoptik, CN=Jenoptik WLAN Certificate Authority
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Issuer : CN=Jenoptik Certificate Authority
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Valid from '2012 Jan 12th, 16:54:49 GMT' to '2020 Jan 12th, 17:04:49 GMT'
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Is a CA cert
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: Added cert (type 2) to chain (2 present on chain)
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [StartSession] - Getting older style priv key
*EAP Framework: Jan 18 12:08:22.338: IOS_PKI_SHIM: Session 0x335ee108 init'd OK
*EAP Framework: Jan 18 12:08:22.338: eap_fast_auth.c-AUTH-EVENT: Local certificate found
*EAP Framework: Jan 18 12:08:22.339: eap_fast_auth.c-AUTH-EVENT: Reading Client Hello handshake
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0033
*EAP Framework: Jan 18 12:08:22.339: eap_core.c:1422: Payload: 0100002F03014F16A8262631FC9DC042 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast.c:202: Handshake type:Client Hello Length:0x002F
*EAP Framework: Jan 18 12:08:22.340: eap_core.c:1422: Payload: 03014F16A8262631FC9DC042253D3E24 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_AES_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_RC4_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: Proposed ciphersuite(s):
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_RC4_128_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: Selected ciphersuite:
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast_auth.c-AUTH-EVENT: Building Provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:255: Content:Handshake Version:0301 Length:0x002A
*EAP Framework: Jan 18 12:08:22.344: eap_core.c:1422: Payload: 0200002603015F3325EADF12E6296F91 ...
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:202: Handshake type:Server Hello Length:0x0026
*EAP Framework: Jan 18 12:08:22.345: eap_core.c:1422: Payload: 03015F3325EADF12E6296F91530FE67F ...
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0B54
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 0B000B50000B4D00059F3082059B3082 ...
*EAP Framework: Jan 18 12:08:22.346: eap_fast.c:202: Handshake type:Certificate Length:0x0B50
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 000B4D00059F3082059B30820483A003 ...
*EAP Framework: Jan 18 12:08:22.347: eap_fast_crypto.c-EVENT: Starting Diffie Hellman phase 1 ...
*EAP Framework: Jan 18 12:08:22.661: eap_fast_crypto.c-EVENT: Diffie Hellman phase 1 complete
*EAP Framework: Jan 18 12:08:22.677: IOS_PKI_SHIM: PKI_SignMessage PostHashEncrypt ret SUCCESS.. op_len 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast_auth.c-AUTH-EVENT: DH signature length = 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:255: Content:Handshake Version:0301 Length:0x028D
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0C0002890100FFFFFFFFFFFFFFFFC90F ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:202: Handshake type:Server Key Exchange Length:0x0289
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0100FFFFFFFFFFFFFFFFC90FDAA22168 ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:255: Content:Handshake Version:0301 Length:0x000B
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 0D00000704030401020000
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:202: Handshake type:Certificate Request Length:0x0007
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 04030401020000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0004
*EAP Framework: Jan 18 12:08:22.681: eap_core.c:1422: Payload: 0E000000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:202: Handshake type:Server Done Length:0x0000
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-EVENT: Sending Provisioning Serving Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-SM: Changing state: Start -> Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast.c-EVENT: Tx packet fragmentation required
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:138: Version: 1 Flags:LM Length:0x03DE
*EAP Framework: Jan 18 12:08:22.683: eap_core.c:1422: Payload: 160301002A0200002603015F3325EADF ...
*EAP Framework: Jan 18 12:08:22.684: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.684: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.685: eap_core.c:1484: Code:REQUEST ID:0x 3 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.686: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.687: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.687: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.687: structureSize................................1048*EAP Framework: Jan 18 12:08:22.687: resultCode...................................255*EAP Framework: Jan 18 12:08:22.687: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.688: proxyState...................................18:3D:A2:0A:EC:BC-02:01*EAP Framework: Jan 18 12:08:22.688: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.688: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
*EAP Framework: Jan 18 12:08:22.688: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.700: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.701: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.701: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 3) to EAP subsys
*EAP Framework: Jan 18 12:08:22.701: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.701: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.702: eap_core.c:1484: Code:RESPONSE ID:0x 3 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.702: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.702: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.704: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.704: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.704: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.704: eap_fast.c:138: Version: 1 Flags:M Length:0x03E2
*EAP Framework: Jan 18 12:08:22.705: eap_core.c:1422: Payload: 3A2F2F2F434E3D4A656E6F7074696B25 ...
*EAP Framework: Jan 18 12:08:22.705: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.705: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.705: eap_core.c:1422: Payload: 413A2F2F2F434E3D4A656E6F7074696B ...
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.707: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.707: eap_core.c:1484: Code:REQUEST ID:0x 4 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.707: eap_core.c:1422: Payload: 413A2F2F2F434E3D4A656E6F7074696B ...
*EAP Framework: Jan 18 12:08:22.707: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.708: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.708: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.708: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.708: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.709: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.709: structureSize................................1048*EAP Framework: Jan 18 12:08:22.709: resultCode...................................255*EAP Framework: Jan 18 12:08:22.709: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.710: proxyState...................................18:3D:A2:0A:EC:BC-02:02*EAP Framework: Jan 18 12:08:22.710: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.710: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
*EAP Framework: Jan 18 12:08:22.711: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.723: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.723: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.724: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 4) to EAP subsys
*EAP Framework: Jan 18 12:08:22.724: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.725: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.725: eap_core.c:1484: Code:RESPONSE ID:0x 4 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.725: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.725: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.726: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.727: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.727: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.727: eap_fast.c:138: Version: 1 Flags:M Length:0x03E2
*EAP Framework: Jan 18 12:08:22.728: eap_core.c:1422: Payload: BD84CC4BF49A766267DA94429BEBE087 ...
*EAP Framework: Jan 18 12:08:22.728: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.728: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.728: eap_core.c:1422: Payload: 41BD84CC4BF49A766267DA94429BEBE0 ...
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.730: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.730: eap_core.c:1484: Code:REQUEST ID:0x 5 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.730: eap_core.c:1422: Payload: 41BD84CC4BF49A766267DA94429BEBE0 ...
*EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.731: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.732: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.732: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.732: structureSize................................1048*EAP Framework: Jan 18 12:08:22.732: resultCode...................................255*EAP Framework: Jan 18 12:08:22.733: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.733: proxyState...................................18:3D:A2:0A:EC:BC-02:03*EAP Framework: Jan 18 12:08:22.733: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.734: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
*EAP Framework: Jan 18 12:08:22.734: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.746: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.747: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.747: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 5) to EAP subsys
*EAP Framework: Jan 18 12:08:22.747: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.747: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.748: eap_core.c:1484: Code:RESPONSE ID:0x 5 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.748: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.748: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.750: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.750: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.750: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.750: eap_fast.c:138: Version: 1 Flags: Length:0x0291
*EAP Framework: Jan 18 12:08:22.751: eap_core.c:1422: Payload: 34C4C6628B80DC1CD129024E088A67CC ...
*EAP Framework: Jan 18 12:08:22.751: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.751: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x0297 Type:FAST
*EAP Framework: Jan 18 12:08:22.751: eap_core.c:1422: Payload: 0134C4C6628B80DC1CD129024E088A67 ...
*EAP Framework: Jan 18 12:08:22.751: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.751: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.752: eap_core.c:1484: Code:REQUEST ID:0x 6 Length:0x0297 Type:FAST
*EAP Framework: Jan 18 12:08:22.752: eap_core.c:1422: Payload: 0134C4C6628B80DC1CD129024E088A67 ...
*EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.753: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.753: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.754: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.754: structureSize................................711*EAP Framework: Jan 18 12:08:22.754: resultCode...................................255*EAP Framework: Jan 18 12:08:22.754: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.754: proxyState...................................18:3D:A2:0A:EC:BC-02:04*EAP Framework: Jan 18 12:08:22.754: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 297
*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 6) to EAP subsys
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Reading Client Certificate handshake
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0007
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 0B000003000000
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:202: Handshake type:Certificate Length:0x0003
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 000000
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:255: Content:Alert Version:0301 Length:0x0002
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 0228
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-SM: Changing state: Sent provisioning Server Hello -> Alert
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:138: Version: 1 Flags:L Length:0x0007
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 15030100020228
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.833: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: EAP method decision: Fail
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1484: Code:REQUEST ID:0x 7 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.834: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.834: structureSize................................65*EAP Framework: Jan 18 12:08:22.834: resultCode...................................255*EAP Framework: Jan 18 12:08:22.835: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.835: proxyState...................................18:3D:A2:0A:EC:BC-02:05*EAP Framework: Jan 18 12:08:22.835: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.835: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 11
*EAP Framework: Jan 18 12:08:22.835: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 7) to EAP subsys
*EAP Framework: Jan 18 12:08:22.838: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.839: eap_core.c:1484: Code:RESPONSE ID:0x 7 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.839: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.839: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.839: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.840: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.840: eap_core.c:1484: Code:RESPONSE ID:0x 7 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.840: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-AUTH-EVENT: Received ACK from peer
*EAP Framework: Jan 18 12:08:22.840: EAP-AUTH-EVENT: EAP method state: Done
*EAP Framework: Jan 18 12:08:22.840: EAP-AUTH-EVENT: EAP method decision: Fail
*EAP Framework: Jan 18 12:08:22.840: EAP-EVENT: Received get canned status from lower layer (0x78000041)
*EAP Framework: Jan 18 12:08:22.840: EAP-EVENT: Sending method directive 'Free Context' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.840: eap_fast.c-EVENT: Free context (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.840: id_manager.c-AUTH-SM: Entry deleted fine id f700000e - id_delete
*EAP Framework: Jan 18 12:08:22.840: IOS_PKI_SHIM: Session 0x335ee108 deleted
*EAP Framework: Jan 18 12:08:2Now we found the reason.
The WLC doesn´t work with the Sub CA respectively with chain certificates for device authentication.
"Support for Chained Certificate
In controller versions earlier than 5.1.151.0, web authentication certificates can be only device certificates and should not contain the CA roots chained to the device certificate (no chained certificates).
With controller version 5.1.151.0 and later, the controller allows for the device certificate to be downloaded as a chained certificate for web authentication.
Certificate Levels
Level 0—Use of only a server certificate on WLC.
Level 1—Use of server certificate on WLC and a CA root certificate.
Level 2—Use of server certificate on WLC, one single CA intermediate certificate, and a CA root certificate.
Level 3—Use of server certificate on WLC, two CA intermediate certificates, and a CA root certificate.
WLC does not support chained certificates more than 10KB size on the WLC.
Note: Chained certificates are supported for web authentication only; they are not supported for the management certificate."
So the WLC can´t decode the peer certificate. -
HELP!! asa 5505 8.4(5) problem with port forwarding-smtp
Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: endHi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks -
Re: Fwd: Link Problems With Borland C++ 4.52
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystal problem.
Many Windows based applications rely on PASCAL calling conventions, which
change the way parameters are handled in function/method calls. They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms for changing
the calling conventions of the prototypes in the generated C++ wrapper
library, so when you compile that code, the linker fails. I think that the
compiler may generate different symbols depending on calling conventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate the distribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI to the appropriate
places in the prototype definitions (see above) and use fcompile to build
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
>
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092James,
Thanks for your quick response. Yesterday we had been running down
the path of examining the calling conventions and trying to change them
to PASCAL, but without much success. After receiving your note, we
went back over it again, and this time we were able to finally to piece it
together. In addition to editing the Forte-generated .cc file to declare
the functions as PASCAL, we also had to turn off the compiler's case
sensitivity. (The Crystal .lib file had the function names in mixed case,
but the Borland compiler was generating all uppercase for the names.)
Now I had actually tried this yesterday and it didn't work (in fact it
generated a whole bunch of new errors) - because until we took a
second look at it today, I didn't realize that Borland's linker actually has
TWO flags that control case sensitivity. If you only turn one or the
other off, things can get pretty ugly looking. As soon as we turned
both of them off, the compile and link went beautifully. Again, thanks
for your help; hopefully we are over the worst of it now!
Dale
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystalproblem.
>
Many Windows based applications rely on PASCAL callingconventions, which
change the way parameters are handled in function/method calls.They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms forchanging
the calling conventions of the prototypes in the generated C++wrapper
library, so when you compile that code, the linker fails. I think thatthe
compiler may generate different symbols depending on callingconventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate thedistribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI tothe appropriate
places in the prototype definitions (see above) and use fcompile tobuild
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
We are trying to wrapper Crystal Reports from Forte. I know that
there
are a number of other people in this same boat, as I've seenmessages
posted here at various points during the past few weeks. We arehaving
a particular problem with getting the compile to go through, whichwe
have sent in to Forte Tech Support. I'm forwarding the message Isent
Tech Support to this group in the hopes that someone here mayhave
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc.
[email protected]
>
>>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / AlaiahChandrashekar
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to
Crystal
>>
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after aday
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message foreach
of the functions we are trying to wrapper. We have tried a numberof
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someonecall
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092-----------------------------------------------------------------------------------
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
[email protected]------------------ -
Problem with Port Forwarding in WRT320N
Good day.
I have a web-server and Internet-radio translator to local network of my provider. And I found a problem with Port Forwarding. I'm trying to setup 80 & 8000 ports to forward. And it's working but only for Internet, without provider's local network. My web-server isn't accessible in local network and radio-translator too.
So is it possible to forward ports absolutely - for any type of connections?
P.S. DMZ is working like Port Forwarding.If you ask questions you have to mention that you have an PPTP connection to the internet and another network directly on the internet port. Otherwise noone will really understand your question as it is a very unusual setup.
Your setup is not one really supported by the router. You are lucky that it works but don't expect too much. Port forwarding only the internet connection. If you use PPTP the network on the internet port is basically hidden. Using that local network on the internet port is not supported.
The DMZ host is the IP address to which all ports are forwarded to which are not forwarded otherwise. The same restriction applies here.
I would recommend to ask your ISP which router they recommend for their internet connection. I think most/all Linksys routers and many other brand's consumer routers won't really support a setup like yours... -
Fwd: Link Problems With Borland C++ 4.52
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
-------------We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
------------- -
AP 2700 - 2 MAC addresses - problem with joining to the WLC
Hi,
I had a problem with joining my new AP 2700 to the controller. I've found workaround but I would like to ask you if you know if this behavior is a some kind of bug or maybe feature :)
I have DHCP server which assigns IP address base on the binding MAC address with the IP address. Without binding, IP won't be assigned so I added MAC address from the AP sticker (MAC and SN number is on the sticker at the back of each AP) to the DHCP, connected AP to the switch port which was configured exactly the same way like other ports on this switch where older AP are working fine and.... nothing. IP address was not assigned. There was no DHCP request in the DHCP server logs.
During the investigation I've found that AP present 2 MAC addresses on the switch interface:
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
11 58f3.54c1.2cb4 DYNAMIC Fa1/1
The first one (58f3.54c1.2cb3) is a "sticker" MAC address but the second one (58f3.54c1.2cb4) is something new. Looking in to the DHCP logs I've found log that this second MAC address (58f3.54c1.2cb4) tried to get IP address but it was not possible because this MAC was not binding with any IP address so DHCP server refuse. I added this second MAC (58f3.54c1.2cb4) to the DHCP server, AP get IP address, join to the WLC, download software, reboot and ... this MAC address disappear.
switch#sh mac address-table interface fa1/1
Mac Address Table
Vlan Mac Address Type Ports
11 58f3.54c1.2cb3 DYNAMIC Fa1/1
Software I had on the AP before joining to the WLC was:
Version :
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1)
now I have (after downloaded from the WLC)
Version :
Cisco IOS Software, C2700 Software (AP3G2-K9W8-M), Version 15.2(4)JB6, RELEASE SOFTWARE (fc1)
Do anyone know what happen?(WLC1) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.130.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.95.16
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System Name...................................... WLC1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.10.10.10
Last Reset....................................... Software reset
System Up Time................................... 25 days 2 hrs 53 mins 5 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +44 C
External Temperature............................. +22 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 6
Number of Active Clients......................... 25
Burned-in MAC Address............................ XX:XX:XX:XX:XX:XX
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 25
(WLC1) >show time
Time............................................. Thu Apr 9 13:51:00 2015
Timezone delta................................... 0:0
Timezone location................................
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
1 0 10.10.10.11 AUTH DISABLED
It's look like AP doesn't allow for console login or commands it just only show activity. After rebooting the WLC I get information:
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.2(4)JB5, RELEASE SOFTWARE (fc1) -
Problem with Port Forwarding (when PPTP is up) in WRT-160N
Hi, everybody!
I'm looking for some help with Port Forwarding in my new router from Linksys. I've bought the router afew daysago, and was badly surprised when I found out that there is DD-WRT firmware is installed in it (the router was 100% NEW when I've purchased it). I have downloaded the latest original Linksys firmware file and successfully flashed it.
But I still have problem (same I had on DD-WRT firmware too) with port forwarding for my DC++ and Vuze (app for torrents): I've written port forward for ports 49151 (for Vuze) and 4000 (for DC++) to be forwarded to my desktop computer (IP 192.168.1.201) -- I've seen a post at this forum, that there could be a problem, if you forward to an IP, which is inside DHCP local zone, so I've forwarded it to .201 IP (my local DHCPzone is 192.168.1.100 - .149). But forwardind doesn't work ((
What's wrong?
My configuration:
Router IP: 192.168.1.1
PPTP (I've got it from my ISP)
IP address: 192.168.226.127
Default Gateway: 192.168.226.2
DNS 1: 192.168.1.1
DNS 2 & 3: 0.0.0.0
PPTP Server IP Address: 192.168.226.2
Username: ****
Password: ****
Single Port Forwarding:
Application name External port Internal port Protocol To IP address Enabled
Vuze 49151 49151 Both 192.168.1.201 Checked
DC 4000 4000 Both 192.168.1.201 Checked
Solved!
Go to Solution.As you have mentioned in your post that your ISP has provided you a PPTP connection with an IP address: 192.x.x.x. The IP address which is provided to you by your ISP is in a Private Range, and if you try to forward any ports on your router it will not work, as your ISP modem will block that port. So you need to get a Public IP address from your ISP.
As you are getting Private IP from your ISP, so this connection is called as NAT behind NAT, and your Modem is acting like a Router.
So now you have 2 options, get the Public IP address from your ISP or change the connection type. -
Problems with porting to Personal Java
Hi all,
I'm currently trying to port a java application to Personal Java to run on the jeode jvm. The application needs certain packages from Java standard Edition, packages like java.util.Properties.class etc. However when I add this package to the core jar of classes for jeode, my program still cannot see it. I keep getting a NoSuchMethod Error on java.util.Properties.setProperties. This method does exist, and I am calling it correctly.
I'm just wondering if anyone has met this sort of a problem with jeode? Also packages like java.lang.object and java.lang.string don't appear in the main jar file for jeode? Does anyone know if this is correct?
Many thanks for yor help in advance,
ShaneHi all,
I'm currently trying to port a java
a java application to Personal Java to run on the
jeode jvm. The application needs certain packages
from Java standard Edition, packages like
java.util.Properties.class etc. However when I add
this package to the core jar of classes for jeode, my
program still cannot see it. I keep getting a
NoSuchMethod Error on
java.util.Properties.setProperties. This method does
exist, and I am calling it correctly.
I suppose you mean java.util.Properties.setProperty(String, String) ? This API was added to Properties in Java 2, so it is not available in Personal Java. You will have to use put(Object, Object), which Properties inherits from Hashtable.
As a suggestion, try running JavaCheck on your project to find uses of APIs not contained in the pjava spec.
Regards,
Alex -
AD Link Problem with ACS 5.2
Hello at all,
we have a Problem with a ACS 5.2. We have installed the Software on a VMware. The Machine ist running without Problems.
Now i would like connect to our AD. The connection is o.k but i can not see any Groups when i make a search.
I get a failure Message in the CLI:
*** glibc detected *** corrupted double-linked list: 0x43b77858 ***
Did anyone know this Message?
Thanks for help.Hi Erick,
thanks for your Answer.
I can solve this Problem. I have Installed the ACS Version 5.2 but without the new Patch.
With this Patch i can connect to the AD and can see all Groups.
regards
Andreas -
RV220W - Problems with Port 25 and SMTP
Hello. I'm really new to networking but I've been given the task of fixing a problem with our RV220W. Up until about two weeks ago our VOIP service would send our voicemails to our emails in a wav. file. But that's stopped completely when we came back last monday. I contacted our VOIP provider and they said they only send emails on port 25 and that our port must not be open anymore. (No network changes have taken place on our end)
So I did the following to open up port 25:
Then I
Still didn't work and they ran a diagnostic and got the following:
(10:42:30 AM) Liz: I restarted the postfix service and then tried to send a test:
(10:42:52 AM) Liz: Unfortunately, same timeout:
Oct 3 10:41:55 pbxtra6939 postfix/smtp[12538]: connect to ratsound.mail.pairserver.com[66.39.4.106]: Connection timed out (port 25)
Oct 3 10:41:55 pbxtra6939 postfix/smtp[12538]: AB9472EC010: to=<[email protected]>, relay=none, delay=30, status=deferred (connect to ratsound.mail.pairserver.com[66.39.4.106]: Connection timed out)
Our normal email service reported that they received no activity on there end and our ISP said they were not blocking port 25. So it must be something in the network settings right?
Any help would be appreciated as this is driving me bananas.
Thank You
Kea Kanamu@indicter
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP -
hello,
i habe a problem in linking my application under the Solaris 9 os using the forte cc environment. Linking on an older machine under Solaris 8 is ok.
I get this error:
ld: fatal: file fz_df_db_anmelden.o: wrong ELF class: ELFCLASS64
ld: fatal: File processing errors. No output written to FZDFNO
There must be a conflict with 32 and 64 bit libraries. How can i link either in 32 or 64 bit. I need both, because the application shall also run on an 32 bit system.
best regards
StefanWhat about the bios settings ? The sony laptop that I have as an install guinea pig had a host of problems as long as plug and play was turned on in the bios then I turned off IrDa and the box seemed a bit quicker. Once I turned PnP off the USB ports started working as well as an external hp 3button mouse. Still no luck with the PCMCIA NIC's though...
-
Link problem with Fireworks CS5 - net::ERR_FILE_NOT_FOUND
Hi,
I'm having trouble with the hotspot links in Fireworks CS5. When I've added the links I want and click F12 to preview in Chrome, it loads the page without problems. But when I click on one of the links I get the following message:
Webpage cannot be found
There was no webpage at the adress: file:///C:/Users/Margiiie/AppData/Local/Temp/FWTemp/LinkedPage.htm
Error 6 (net::ERR_FILE_NOT_FOUND): Could not find file or catalogue.
(translated by me from Swedish to English, so it might not be 100% correctly translated).
A few days ago I used Revo Uninstaller Pro to remove some files from my computer, and I remember clicking "Remove temporary Internet Files" on all of the web browsers. This might have something to do with the problem, but I can't seem to able to recover the files I removed..
So, I really need som help here! Do you think that the removal of the temp files is the problem? What can I do about it?
Regards,
MargiiieIf you tried a) refreshing/reloading the page within the browser and b) emptying the contents of the FWTemp folder, and neither of those worked, then I'd take another look at the link itself. Assuming there are other links on the page you've created, compare the links within Fireworks: Are there any differences between them? Would it be possible to re-enter or re-establish the problem link's URL?
One thing I notice in your intial post is that "LinkedPage.htm" seems all by itself within the FWTemp folder, instead of being placed in a subfolder. When I generate a preview in FW, it places the contents in a folder (named with a random number), like this:
file:///Users/doug/Library/Application%20Support/Macromedia/Fireworks%208/FWTemp/24327926/ 00000002.htm
Generally, a website observes a folder hierarchy. I'd kind of expect "LinkedPage.htm" to be in the same folder as the "index.htm" or whatever your problem page is called.
I have to admit, I don't use Fireworks to create and preview web pages, so I'm not completely versed in how it works for a full website. I'm not 100% certain that previewing an individual page should result in a functional preview of an entire site. In other words, I'm not certain that links are supposed to work if they lead to another page within the same site (assuming you're previewing one page at a time). If this remains a problem, I'd suggest letting it go for now. Try File > Export instead, and make sure you're exporting all the pages in the site. If that works, then you're in good shape. -
Problems with Port Forwarding for RDP in WebVPN
Hi,
I'm hoping somebody can help me solve this problem that's been bugging for weeks. We recently implemented a double-layer firewall architecture. Before that, our users can access RDP via port forwarding on WebVPN or the Cisco VPN client without any problems.
After we implemented the double-layer firewall architecture, users who are going through the WebVPN and port forwarding for RDP began to experience frequent disconnections, slowness or freezing connections. The users who are using the client are fine.
I checked the logs and I'm getting repetitive TCP-O for the port forwarding connections for RDP. Additional information: the FW we installed as a 2nd layer is Netscreen. I've already set the policy on it to Any-Any for the meantime to help in troubleshooting but to no avail.
I hope somebody can help me in sorting this out as I'm kind of confused on the difference between the port-forwarding for RDP via the WebVPN and the normal RDP via the client.Hi,
I didnt see anything marked with red in the above? (Atleast when I was reading)
I have not really had to deal with Routers at all since we all access control and NAT with firewalls.
But to me it seems you have allowed the traffic to the actual IP address of the internal server rather than the public IP NAT IP address which in this case seems to be configured to use your FastEthernet4 interfaces public IP address.
There also seems to be a Static NAT configured for the same internal host so I am wondering why the Static PAT (Port Forward) is used?
- Jouni -
Image Link Problem with Dreamweaver CS4?
On my website, I have several images that link to other parts on my website. These work no problem when I preview the site, but after I test the links, the images that had those links have purple outlines that really clash with my website's design. Will users see this if they click on my links, and then return to the page? I'm using CS4 right now, and never recalled having this issue come up when using MX. Thanks for the help.
I got stuck on this one too - not realising that Dreamweaver automatically palces a border on every image link - but the simplest way I found was to have my "Properties" panel showing on the bottom and input 0 into the "Border" box. By having this panel open you can see if you have accidently applied any styles to the image, where it links to, Image size attributes and the Image name.
Maybe you are looking for
-
i liked ios 5 better but still had problems but now since i updated to ios 6 on both my pc itunes and ipod touch 4 my music library glithches freezes skips crashes sticks repeats when i play my music and it's unbearable especially since i'm a huge ad
-
ITines is not compatible with Windows Vista Ultimate
I tried 3 times to install (re-install) iTunes 7.3 so I could activate my iPhone. iTunes kept returning a message to uninstall and re-install iTunes, since some unknown piece of software was needed to recognize the iPhone. When will Apple fix this pr
-
Output Module (Bridge CC) not working on Mac
As suggested here http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html I downloaded and tried to install the Bridge CC Output Module. I could not find the "Bridge CC Extensions" folder only "Bridge CC" I can see the output name insid
-
ITunes music sync problem: "drag & drop" works; "Sync Music" doesn't?
I've been trying to sync a few new playlists of music to my iPhone 3GS with frustrating results. I'm hoping someone can explain to me what I may be doing wrong. In the past when I wanted to add new music to my iPhone I would use what I refer to as th
-
Hi, I have totally three pages in my smartform.In which the first page consists of line item details from a quotation, second page consists of details for the first item in the first page and the third page consists of remaing details of the sam