Link queries dynamically in a work book

Hi,
I have a workbook which has two queries (both of type transaction data), embedded. Both of them have a document number which is unique and could exist in both the queries. I want to link the two queries and in my third sheet in the work book I want to print Key figure values of both the queries if two key characteristics ex: doc number and date are the same. Please let me know if there is any thing to be done in the Bex analyzer side other than a "Vlookup" in excel.
Thanks

You can use excel macros to achieve this.

Similar Messages

How to Add 3 queries in the same work book?

Hi Gurus,
Can any one tell How to Add 3 queries in the same work book?
Example, daily report,Monhly and yearly reports for sales should be in the same workbook.
Please help me if any one have a pointer or a how to doc if available.
<<Text removed>>
Thanks
James
Edited by: Matt on Apr 26, 2010 9:36 AM

Hi James,
According to BI 7.0 Version
Steps of creating workbook and to insert more than one query in a workbook.
When you run a query and it opens in Bex Analyzer you can click the save button and pick "Save as Workbook".
Once you save it as a workbook Click on the "Design Mode" button in the Bex toolbar (looks like an A).
Click in the sheet where you want the new query to go, click the "Analysis Grid" button. It will add the analysis grid to your new sheet.
Right click on the Analysis grid and go to properties.
Click on button to change data provider and select the query you want to attach.
Exit design mode and you should be all set.

Work Book for BW Statistics(Urjent)

Hi All,
        I have to install six cubes related to BW Statistics.I know how to implement these cubes.My query is before installing the cubes i have to in stall work books related to these cubes.
When i checked in Business content there are three workbooks are available
                     1. BW Statistics 2.0(New)
                     2. BW Statistics 1.2 etc....
Please let me know which one i need to install?
Thanks & Regards
Ramakanth.

Hi Venkat,
              Thanks for giving the reply.
I need some clarification this.When i have checked for the new one 2.0 there are some queries available for this work book.I need to install all the quries or we need some of them only.Let me know for BW Statatistics which queries are to be installed for this work book.
Regards
Ramakanth
I will assign points.Please provide me the solution for above my query

Migration of queries and work books to BI7

Hi,
I would like to Migrate all the existing 3.X queries and work books to BI7.0 in Development box.
Is it possible to capture these changes into a transport request, if possible how do I capture.
Please guide.
Regards,
Sharma. IVN

Sharma,
Its better to collect all queries of a Infoprovider in a single request as u can avoid locking of dependent objects in different requests..Migrating workbooks would be tricky if u have any macros.Have a look at below links on migrating front-end objects
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 2
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 1
Migrating Advanced BEx Analyzer Workbooks - What VBA is Supported?
Chandu

Migration of work books, queries and web report

Hi,
kindly give me the steps to migrate workbooks, queries and web reports from BW 3.5 TO BI 7.0
Regards
Asim

Hi,
Kindly check the below link:
Migration of Queries and Work Books from BW 3.x to BI 7
/people/teja.badugu/blog/2008/11/11/migration-of-queries-and-work-books-from-bw-3x-to-bi-7
Hope it helps,
Thanks,
Amit

Embedding 2 queries within the same tab in a work-book?

Hi Experts,
Is it possible to embedd multible queries within a single tab in a Workbook?i.e. can we define a cell range in which a particular query is to be embedded and a different cell range within the same tab for another query?
Thanks
Aravind

Hi,
It is very much possible.
Just insert the 2 queries at different places and save the work book.
In the properties you can so the the result of the 2 queries do not overwrite and ouput is adjusted accordingly.
Regards,
Nitin

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

How to inser queries in work book in BI7

Hi Experts,
Can you please explain the steps to insert queries in different worksheets in BI7 Bex Analyser?
Thanks,
DV

Hi,
Follow the below steps to insert multiple queries in one work book.
1. First run one query in analyzer, once you get the output just click on Design mode.
2. Place the cursor where ever you want to insert new query and click on Analysis Grid.
3. Once Analysis Grid inserted in desired cell, By double clicking on analysis grid goto properties-->Create Data provider from General tab.
4.To Assign query to this analysis grid click on Assign Query / Query View
5.Select new query from the new dialog box and click on Open
7. Click again OK on the properties screen.
6.To refresh workbook on open select "Refresh Workbook on Open" option from workbook settings.
Hope is helps...
regards,
Raju

Activation of BW Production Objects and Transport of Queries and Work books

Hi,
I have successfully transported 0FIGL_1 InfoCube (only in Data Flow Before) from BW DEV to BW Production...
But In BW Production This Cube and InfoSources and Update rules and InfoObects are all in inactive...
What to do?..
Please tell me step by step procedure.....
and also suggest me on how to transport Queries and work books related to My 0FIGL_1 Cube...
Please tell me all step by step procedure...
Help will be greatly appreciated..
This is very urgent
Thanks in advance...

Hi,
May be you are telling is correct but i am unable to follow..
Please correct if my understanding is wrong....
1. I have Created one BEx Truck Request...it is not Released so far..So, it is there in SE09 of BW DEV
2. Selected Queried and work books --- Grouping --- Only necessary objects -- Collection mode -- automatic...(Default all queries and workbooks selected as check box)
3. Click Transport truck (Which is beside of Grouping Option)..
4. Created one request and then released... But not imported into BW Production..
5. Now I have modified all the queried (Change text)
6. RSA1 -- Transport connection -- Selected modified queried...
7. Grouping only necessary objects and collected mode --automatic...
8. Selected modified queries and dragged into right side...
My question here is they are not checked check box under transport?...shall i check it?
Shall i release Old BEx Request? and then before transporting these new modified queries Create another BEx Request?
or else..
Create new request for modified Queries? and then transport?
Now the situation is i have already created transport request for modified queries..What to do? shall i release them also?...
Pls suggest me....

Work book with many queries

Hi everyone,
Now we have a very urgent problem,you know the workbook is composed of by two or more querys.but when we refreshed it ,only a part of the query is refreshed,not all the query.So when the customer update the workbook,they get the history data which the saved version.
Now the system version is BI7.0,it has lots of problem,and our support package already been 15.
Is there anyone ever met such problem,
Thanks & Best regards,

hi,
In BI 7 work book you can find one check box for refresh work when open in the properties of work book, please check that and see.
hope this link provides u useful info...
[http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a551ce09411d2acb90000e829fbfe/frameset.htm]
Assign points if helpfull.
regards,
NR

Work Book and their corresponding Queries

Folks,
I got the active Work books from RSRWBINDEX and RSRWBINDEXT tables, can some one tell me where can I find the corresponding Queries (Query ID) for these work books.
Thanks,
Kumar

John,
Thanks for the info, I was able to get the info from this table.
Thanks,
Kumar

How to Creat Work book

Hi Bw guru's,
please explain how to create work book using querries.
thanks in advice.
kumar.

hi kumar...chk these..
Workbooks into which queries are inserted are no different in appearance than other Excel workbooks. They can be saved as files, copied, sent and (using Excel functions) edited however you like and even supplemented with other data.
Ad-hoc query is the one that the user/developer would want to create/use for researching/validating something. This may be to validate the data also. This differs from Production query as it would not be used everyday and would be just be used for that moment.
http://help.sap.com/saphelp_nw04/helpdata/en/3a/89883989676778e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
http://searchsap.techtarget.com/searchSAP/downloads/chapter-august.pdf
workbook
1) A workbook delivers the interface for your query.
2) In a workbook, you can embed design items and customized macros, and you can format its appearance for a highly customized look and feel. The end-user will typically open a workbook and navigate within it execute its queries and see current data.
3) A query ad ho in WAD means that in your Web application, you want to be able to display data in a table or graphic, similar to in the Web Analyzer.
You can do this by using the Dropdown Box Web item and linking the commands for showing and hiding Web items to it.
hope it helps..

How to create the default empty work book with company logo and address????

Hi Guru's
I am working in ECC5.0 (BW 3.5), i wann create the default empty work book with company logo and company address. so when i am executing any query's that should open in the default empty work book.
greatly appreciated your help. will assign pt's for sure.
thanks and regards
Mohan

Hi Mohan,
Report designer is used in BI 7.It is a seperate application used for formatting
the report.
For BW3.5,go through this link.
http://help.sap.com/saphelp_nw04/helpdata/en/33/746e393cf65c1ae10000000a114084/frameset.htm
This would help you
Regards,
Senoy

Code to get the all Records in Work Book

Hi,
I have a Report to show on work book, Now I am used REFERENCE to get the data.
In Work book i have used formula for one cell and i draged that to few rows(for example 100).
Here my problem
If i get below 100 records there is no problem, if it exceds 100 i won't get the records.
some times I get in my result <b>REFF #</b>
to solve this problems any macro code or any other solution?
cause my report is dynamic report some times it give 1000 records some times 100, it should be automatically .
i know dragging the cell poor quality of coding.
any code which help my problem will be appreciated.
Thanks
Priya

Hi Priya,
I do not understand the problem. Please show the formula you are using.
Does the REF# problem occur when you first put the formula in the cells, or only after the query is refreshed?
If the former, you have an Excel problem. If the latter, the problem is that BW will delete the old query result table before it inserts the new query result table, and the REF# means that the reference cells were deleted. In this case, the solution is simple and a simple macro will fix the problem for you.
I can help you if I understand which problem you are having.
- Pete

UIX: how to get dynamic image generation working on ias10G?

Hi,
Anybody got UIX Dynamic Image Generation working on ias10G, on unix? My Images do not get generated (the page only shows the plain links)
My env:
- ias10G
- AIX Version 5
- java version: unknown, do not know what version ias10G is using
On earlier versions (OC4J 903) we had to make sure an XServer was running and pointed our DISPLAY variable to that server. When the XServer was down, we got a nice error message in the application logs. However on ias10G I cannot figure out where to set this variable and I cannot find any error messages.
Can anybody please help me out a bit?
Cheers,
Martijn

Hi Andy,
Thanks for your reply. However, I have not yet been able to get it working.
I have verified that the java version is indeed (this is what the oc4j logfile shows when I supply the -showversion parameter)
java version "1.4.1"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1)
Classic VM (build 1.4.1, J2RE 1.4.1 IBM AIX build ca1411-20030930 (JIT enabled: jitc))The relevant fragment of the opmn.xml:
          <process-type id="oc4j_cif_mh" module-id="OC4J">
               <module-data>
                  <category id="start-parameters">
                     <data id="java-options" value="-Djava.security.policy=/oracbd/j2ee/oc4j_cif_mh/config/java2.policy -
Djava.awt.headless=true -Xmx75m -Xms75m -showversion"/>
                     <data id="oc4j-options" value="-properties"/>
                  </category>
                  <category id="stop-parameters">
                     <data id="java-options" value="-Djava.security.policy=/oracbd/j2ee/oc4j_cif_mh/config/java2.policy -
Djava.awt.headless=true"/>
                  </category>
               </module-data>
               <start timeout="900" retry="2"/>
               <stop timeout="120"/>
               <restart timeout="720" retry="2"/>
               <port id="ajp" range="3301-3400"/>
               <port id="rmi" range="3201-3300"/>
               <port id="jms" range="3701-3800"/>
               <process-set id="default_island" numprocs="1"/>
            </process-type>Finally, your JSP passes the test. I can access it. But still no uix image generation. Are there any logfiles I can check for error messages on the failing image generation? May it be a web cache problem?
Thanks in advance

Link queries dynamically in a work book

Similar Messages

Maybe you are looking for