Link, Rules and KPI

Hi BPA Users,
I start using BPA Suite, and we have some issues
on the following arguments :
1) Is it possible to link (Assignments ?) in a Application System Type Diagram
a sub-process displaying a specific service implemented by one application system component ?
2) In Oracle BPA Suite rather than ARIS Suite, there is no Business Rules Editor ; what is
the best practice in Rules Editor Design ?
3) What is the method to integrate KPI in Business Process Design ?
Thanks a lot.
Regards

Hi Marco,
Regarding your BPA questions:
1) Is it possible to link (Assignments ?) in a Application System Type Diagram
a sub-process displaying a specific service implemented by one application system component ?
My interpretation of your question is that you want to link a complete “sub-process” describing the behaviour of an implemented IT service. If this is your question a possible way is to use “Program Flow Charts”. This is sufficient to describe a more logical perspective of a service behaviour. Therefore you have to connect a “IT Function Type” with your “Application system Type” or “Module Type” object and assign a “Program Flowchart” to the “IT Function Type”. But this is only one possible way.
2) In Oracle BPA Suite rather than ARIS Suite, there is no Business Rules Editor ; what is
the best practice in Rules Editor Design ?
In BPA we recommend to use a “Rule” object that can be either the genuine rule object (if this fits into your modelling context – in most cases it does) or a generic object created for this purpose. Behind this object we use either specific links to connect to a “real” rule modeller or if you want to do it in a lighter version Excel.
3) What is the method to integrate KPI in Business Process Design ?
There are many ways to define KPIs within the BPA Suite. For the time being everything only represents a design. There is no current connection (technically and methodologically) with a KPI measurement (like BAM). This is planed but not implemented yet. Therefore everything you are setting up right now is a little bit fuzzy. I recommend just using the KPI objects defined by the standard and keep it on a high level modelling.
Regards
Dirk

Similar Messages

Link between Rules and Organisation assigned in Rule Modeler

Hi,
Go to Transaction CRMC_BSP_ANALYZE,
Give Application Name: CRMM_ERM_RULES
It will go to Rule Modeler:
In this just click GO button. You will get the Policies. Click on the Policy you will get different rules.
When We drill down the rules and select a rule you can view ACTIONS tab.
In ACTIONS tab you can see Organisation Object and Outgoing E-Mail Address assigned to a selected Rule.
Can you please let me know what is table names and link to get the Organisation Object and Outgoing E-Mail Address.
Thanks a lot in advance.
Best Regards,
Azaz Ali.

Hi Azaz
To find the Organizational Object go to Transaction PPOMA_CRM the details you need are under field "ID"
The Outgoing Email address can be found under transaction CRMC_IC_FROMGRP.
Hope this helps
Regards
Arden

How to use rules and roles in workflow?

Hi experts,
I am a beginner in workflow. Could any one tell me how to use rules and roles in workflow ?
Can u pls tell me the steps to follow?
and more over what are all the <b>important things</b> we have to learn in workflow module ??
I shall be thankful to u.
Thanks
uma

Hi
Workflow automates the steps and activities in a business process according to predefined procedures and rules.
Workflow presents information and documents to the appropriate knowledge worker or agent (another entity such as a program) to make a decision or perform an activity.
Workflow tracks each and every step in the process flow and maintains an ongoing status.
Workflow also collects and reports all of the metrics associated with the execution and completion of the process.
Check the below links u will get lot of info..
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
For more reference on workflow: http://****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/9277a346f311d189470000e829fbbd/frameset.htm
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://www.sapbrain.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
Regarding Work Flow
work flow scenarios.
1. applying for a leave.
2. approval process.
3. material creation process.
4. mainly work flow is for notification purpose.
chk this links
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.erpgenie.com/workflow/index.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.insightcp.com/res_23.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-press.com/downloads/h950_preview.pdf
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
also seach the workflow forum: SAP Business Workflow
Regards
Anji

Unofficial Forum Rules and Guidelines

I realize there is an official Community Guidelines thread, but I feel it should cover more topics than it does. So here is my attempt to have a thread I can point new users to, if they are unsure how forum etiquette works.
Before Posting a Question
Many posts have been made on the forums over the years and many topics have been covered. You are likely not the first person to attempt something, or having difficulty. Search the forums first for the question you would like to ask. NI's forum search works well but feel free to use Google to search the forums. Try searching with alternate terms, like "System Tray" instead of "Icon Tray".
Posting a Question
When posting a question you should first follow the guidelines linked earlier. In addition to those points I'd like to mention a few more:
Not everyone on the forums speaks English. If English is not your native language feel free to post questions in your first language, but be aware that there are several non-English speaking sub-forums. If you post a non-English question in the English forum, you may or may not get people who speak your language. Stick to forum for that language to ensure you get the help you need.
Post in the right sub-forum. Language is the first sub-forum to consider, but topic is another. If you are asking a question about LabVIEW exams, it is better to post in the Certification board, rather than the LabVIEW board. If you posted in the wrong forum ask a moderator to move it to the appropriate section.
Have a useful title. The title of your question should never be "labview" for "fpga". Your title should also not be a paragraph. It should be a quick summary of the topics your post is going to discuss.
Do not use caps lock unless you are really yelling. It would be rude for me to ask a question by yelling and the same goes for the forums. This goes for the title and the post.
Do not beg for help using words like URGENT, or LIFE AND DEATH. This is again rude, we are largely volunteers that like to help, but not when we are being yelled at.
Use words not letters "NEED hlp Plz R U labview xpert?" Use full English sentences. If you have trouble with this please refer back to speaking in your native language, or go back and take English class.
There is rarely a need to change the font size, color or style from the default settings. You are wasting your time, and likely making your post harder to read. Stick with the default font styles.
Try giving as much information about the conditions of your question. Things like: What version of LabVIEW are you using? What operating system are you using? What hardware are you using? and What sensors are you using? are a few common ones.
If you want to ask the same question on another LabVIEW board like LAVA, feel free to do so. One thing that helps collaborate efforts is to provide a link in your post back to the other place where the question was asked. This way someone on the NI forums can see what has already been said on another forum.
When posting code post the actual code not a screenshot. You wouldn't take a screenshot of a text file and post it on a text language forum. Upload the actual VI, or zip several files and upload the zip. The exception to this rule is when uploading a VI Snippet. This is an image with the VI embedded in it, so the source is still intact.
When you don't get the help you want
If you posted a question and didn't get any response, or didn't understand the responses you got, do not make a new thread on the same topic. Doing this will fragment the conversation and you will have two groups of people working on the same problem.
Don't simply BUMP a thread with a new post without more information. This is a sign that you don't want to put in any effort and are simply nagging others to help you. If a thread goes dry and you want more help, try getting more information on the subject, or try something and reply to the thread with this new information. This shows you are willing to work towards your goal, and aren't just looking for others to do your work for you.
When you get the help you want
Volunteers put in effort to help you and they want to know they are appreciated. The forums have several ways to say "Thank You" to those that have helped. Here are the preferred methods.
Kudos
You can thanks a person on the forum by giving them a Kudo. A user on the forums can Kudo a post by another user once, but multiple users can Kudo the same post which can highlight posts that a collection of users find useful.
Here is a thread discussion when users choose to give Kudos.
Marking Solutions
Any reply to a post can be marked as a solution to the post, if the sub-forum supports marking solutions. This is helpful because the thread will get a green check mark showing a solution to the question has been found. Threads can have multiple posts marked as a solution, but it is best to limit the number of posts that are the solution. Mark the posts that answer the question, not just helpful posts. A helpful post can be Kudo'd, but doesn't need to be marked as a solution.
Things Not To Do
Do not send private messages to a user asking a question. Forums exist so we can work to solve a problem as a group. Contacting someone privately causes that to not work.
Do not post personal information. This includes Email, or phone contact information. Spam bots crawl forums like this looking for your information. This also means don't make your user name an email address.
Do not have huge signatures. They waste space on the forum and can clutter the conversation. Signatures are okay, but large ones are discouraged.
Do not post homework assignments. We are not going to do your homework for you. You are welcome to ask specific questions about things you don't understand. But don't post your homework and expect someone to do it for you. You won't learn this way.
Do not resurrect old threads that have nothing to do with the new question. A post from 2002 about how to setup a DAQ task will likely not be related to your question about reading a serial port. Make a new thread asking your new question.
Looking For Free Training
Many times new users of NI hardware or software just don't know where to start. They will ask a question but without knowing the terms, or the intended purpose, they will not be able to form a proper question. Here are some free training tools primarily focused on LabVIEW and NI hardware.
NI Learning Center
NI Getting Started
-Hardware Basics
-LabVEW Basics
-DAQ Application Tutorials
3 Hour LabVIEW Introduction
6 Hour LabVIEW Introduction
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
More general forum etiquette tips can be found here. Not all of these are relevant to the NI forums but there is very good advice in there. There is also the How To Ask Questions The Smart Way.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

When attaching code:
Include all subVIs, typedefs, and global variables, etc.
Remove all passwords from password protected VIs.
Do NOT include anything from vi.lib or that is part of a standard LabVIEW installation.
Do NOT include libraries from commercial third party drivers unless you suspect them to be the cause of the problem.
If it is an entire project, zip everything up. (A "*.lvproj" file does NOT contain anything useful. All code referenced in the project needs to be included).
If you attach more than one VI, tell us the name of the toplevel VI.
Set all controls to typical values, then make them default before saving. Do not set indicators to new default values, especially e.g. graphs containing huge amounst of data.
Ideally, all we should need to do is open and run the VI to see the problem.
The default data should be typical and not biased in any way. If an input is a matrix, don't make it square or symmetric unless that is guranteed to always be the case.
Tell us how to demonstrate the bug (e.g. Run A, set control B to X, Indicator C is now Y while I expect it to be be Z instead, etc.). Include these instruction as diagram comment on the toplevel VI.
If the problems is with reading a file, include a sample file that demonstrates the problem.
If you run the newest LabVIEW version, you might want to downconvert to a lower version before attaching (file...save for previous...). This way there are more people that can potentially help. (Of course if the suspected bug depends on the version, you should attach the version that demonstrates the bug.)
If you make claims about speed or benchmarking:
Tell us what you consider fast or slow. "Seconds" could be fast for one problem while "microseconds" could be considered slow for another.
Include your benchmarking code.
Make sure the speed test is sound and not polluted by debugging settings. Keep the front panels of subVIs closed, watch for code running in parallel, and avoid front panel updates.
Make a distinction between slow code and slugginsh FP responsiveness.
LabVIEW Champion . Do more with less code and in less time .

Setting Overrides on all relevant Rules and Monitors

Can someone please help me with the following question? I was reading the post below (I believe written by
Cameron
Fuller) detailing some best practice around overrides. It stated if you override a ‘parameter’ for one rule/monitor (e.g. let’s say a parameter
dealing with a threshold) you should override the parameter for ‘all’ rules and monitors 'that use this parameter'. More information from the post below
Make sure that an overridden parameter is set for every rule and for every monitor that uses the parameter
When you override a parameter, make sure that the parameter is configured for each rule that uses the parameter and for each monitor that uses the parameter. There may be more than
one rule or monitor that uses the particular parameter. For example, the following rules and monitors use the
Intersite Expected Max Latency parameter: Monitors
AD Replication Monitoring
Rules
AD Replication Performance Collection - Metric Replication Latency
AD Replication Performance Collection - Metric Replication Latency: Maximum
AD Replication Performance Collection - Metric Replication Latency: Minimum
AD Replication Performance Collection - Metric Replication Latency: Average
Now my question is:
How do I discovery all the rules/monitors that are using this particular ‘parameter’?
For example using either PowerShell or SQL query. If PowerShell I assume you would have to
use Get-Rule or Get-SCOMRule with the –Criteria filter. Does anyone have an example please?
As a side note I could do the following in PowerShell as one way to find all cmdlets what use the –path parameter as one of their parameters
Get-Command -CommandType cmdlet | where {$_.parameters.keys -eq "path"}
So to recap: As above if I want to set an override on ‘Intersite Expected Max Latency’
for a given rule or monitor how do I find all other rules/monitors also use ‘Intersite Expected Max Latency’
as I can override these too?
Thanks All
AAnotherUser__
AAnotherUser__

Hi,
We may use the specific word to filter out those proper rules and monitors， to filter out all monitors that which name contains latency:
get-scommonitor -name “*latency*”
Please refer to the below links to find more details about the get-scomrule and get-scommonitor command:
Get-SCOMRule
http://technet.microsoft.com/en-us/library/hh918556(v=sc.20).aspx
Get-SCOMMonitor
http://technet.microsoft.com/en-us/library/hh918469(v=sc.20).aspx
Regards,
Yan Li
Regards, Yan Li

How to handle rules and activities in AII

Hi experts,
How to handle rules and activities in AII. Is there any transaction code for it. please give some information, it will be hepful for me

In IMG go to Conditions & Rules to configure the relevant rules.
Rules in AII represent business process you intend to RFID enable. Each rule is made up of multiple activities that defines exactly how a particular rule functions.
SAP delivers standard rules & activities for standard scenarios of Pack, Load etc. processes.
For more information on AII rules and activities refer to the performance assistant available in IMG or read more at the link below:
http://help.sap.com/saphelp_autoid40/helpdata/en/index.htm
Hope this helps.
-Ashish

Business rules and active databses

All,
Are there any good links where I can read about the limitations of active database features (such as constraints and triggers) and other options and alternatives to implementing business rules?
Regards

BPM and a rules engine are different. Both are important, but they have different uses.
Oracle BPM Studio is used by Business Analysts and Developers to model processes, integrate underlying components (including business rules) and develop user interfaces.
There's an Engine that executes the processes that have been modeled. It sends the work item instances to the right person or persons with the right data when the work item reaches an interactive activity in the process. Similarly the Engine has invokes the underlying components specified in the process when the work item instance reaches an automatic activity.
There's an out of the box Workspace runtime that lets end users manage and run their work item instances as they flow throughout the processes.
We can business rules inside the processes, but one does not replace the other.
Dan

JHeadstart, Oracle Business Rules and BPEL Process Manager

Dear JHeadstart Team,
I have some questions regarding integration of JHeadstart and Oracle Business Rules and Oracle BPEL Process Manager. As a matter of fact I don't have any work expriences with these tools so my questions may not be good and precise.
1- Using a business rule engine can dramatically increase speed of development and ease of maintenance.I had a very good exprience in using JHeadstart and Headstart in the past but I wanted to know if it is possible to use Oracle Business Rules in conjunction with the JHeadstart ? If so, What steps should be taken? Is there any known issue about this integration? Does Oracle Business Rules have any interference with JHeadstart or it is only used in model layer during insert,update,delete?
2- Is it possible to develope a system based on oracle work flow engine (Oracle BPEL Process Manager) using JHeadstart ? If so, What steps should be taken and how the changes in the flow of work would by applyed in a system developed by JHeadstart. Is there any known issue about this integration?
Any help,link to documents or general guidelines would be highly appreciated.
Thanks in advance,
Navid

Couple of things I would like to add, are the following.
In the context of an ADF application usage of Oracle Business Rules most likely is in the business logic layer, but mind that it does not need to be restricted to that.
Oracle Business Rules takes so called 'facts' as input, evaluates some rules based on that and change those facts or return some result. That might be checking a business rule as defined in the JHeadstart Developers Guide. But it might also return some value that is used in a navigation rule.
Think about a page flow where after page A normally page C is presentend, but in case of some situation (like a customer ordered something and you want to present some special offering based on that) you want page B presented in between (i.e. A -> B -> C). Oracle Rules could be used to determine this page flow. This would be an example of using it in the controller layer (probably in combination with using facts that come from the model layer).
Another remark that I would like to make, is that in my opinion it does not make much sense to use Oracle Rules for business rules that logically more or less are part of your data model (like end date must be on or after begin date). You typically use Oracle Rules to implement business rules that are of a volatile nature, meaning that day-to-day business may require a change of the rules. One example is the navigation case that I mentioned before. Another (typical) example would be a rule that defines when a customer is a Gold customer.
Jan Kettenis

Publish the port forwarding rules and req. for customers to use the FiOS TV features they pay for!

Please read this thread and vote.
http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/Publish-the-port-forwarding-rules-and-req...

Here they are, but - yes it would be great if Verizon published these, or at the very least linked to Actiontec's Website, where they publish the rules as well. or at least sticky some of these instructions here in the forums.
Instructional Video's and step by step detailed instructions for port forwarding
How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router (actiontec.com)
How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router  (actiontec.com)
PCWintech's guide to portforwarding for the actiontec MI424WR (Verizon Firmware)
PCWintech's guide to portforwarding for the Westell 327w DSL Modem
PortForward.com
I put my vote in.
EDIT: I Didn't realize you were asking for the port forwarding rules to the features, I should have read better. But yes I agree with that too.

Error message when processing business rule and dimenstion

Dear BPC Experts:
While I am testing BPC FX Restatement pacakge, I make most use of original se-up in APSHELL, and just do some some config in related dimension and business rule. However, when I process business rule and dimenstion, one message shows that "_unexpected error in application server"._ And I still tried to run FX Restatement package, in detail log, it says "Member USD not exist." Does anyone help me figure out the reasons? I really appreciae your help.
Fred Cheng

Hi,
I am not sure if the configuration of MSMQ is fine at you side, it is better to check my how to document too as here I clearly mentioned about MSMQ steps.
This is the direct link: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/101531ad-bcf5-2b10-ac9c-c102908c1b7f
Just skip the ABAP part and follow the MSMQ part.
regards,
Sreedhar

Rules and function(pe04)!!

Hi,
can we use function(custom) in the rule and pass the parameters at run time like we do in case of operation(ie in the rule itself..eg zcustX...where X is an indicator)?
regards
gunjan

HI
GOOD
PE04 Create functions and operations
GO THROUGH THIS LINK WHICK WILL GIVE YOU MORE IDEA ABOUT PE04
http://www.sap-press.de/download/dateien/725/sappress_mysap_hr_technical_principles_engl.pdf
THANKS
MRUTYUN

RULES and ALERTS in Workflows

Hi Experts,
Can anybosy help me with Rules and Alerts in Workflows. I have searched the FORUM but nothing I got that is related to RULES.
Anybody has any material that could prove helpful for me.
With Best Regards,
Kanika

Hi Kanika,
Hope the following link be useful to you regarding RULES in Workflows.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70c6c6e7-3ede-2a10-deb8-8da2071fbaf0
Thanks
Nitesh

Transfer Rules and Update Rules

Hello,
What is the exact difference between Transfer Rules and Update Rules ????
NImisha

Hi Nimesh,
   Transfer rules are the combination of communication structure and transfer structure here you are sassing the fields between transfer structure to communication structure..
   Updater rules are crating between data marts and info source, here you are creating the update rules based on communication structure.
   For more information go through the following link...
http://help.sap.com/saphelp_nw04s/helpdata/en/fc/1251421705be30e10000000a155106/frameset.htm
Regards,
PRK
Message was edited by: PRK

Is there any rules and regulations to do SOA projects ?

Hi All,
1. Is there any rules and regulations to do SOA projects thro' XI?
2. Is it necessary to use BPM for SOA projects?
Regards
Sara
Points will be rewarded for the helpful answers

HI,
See the below links
/people/kevin.liu/blog/2005/10/17/esa-soa-es
EAI:
http://en.wikipedia.org/wiki/Enterprise_Application_Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01bd5e9-1056-2910-00a6-cad748999126
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d19c8ee-0c01-0010-619d-92af980436d7
SOA vs ESA
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1a61c36-0301-0010-06be-d34e2f379a65
SOA - http://en.wikipedia.org/wiki/Service-oriented_architecture &
ESA - /people/kevin.liu/blog/2005/10/17/esa-soa-es
. Why SOA
/people/maxim.efimov2/blog/2006/08/22/the-roadmap-to-enterprise-soa-begins-with-150147-why148
SOA Foundations
/people/natty.gur/blog/2007/02/27/three-major-foundations-for-soa
2. SOA with SAP
/people/oleg.figlin/blog/2006/06/20/sap-discovery-system-for-enterprise-soa--part-1
/people/oleg.figlin/blog/2006/06/26/sap-discovery-system-for-enterprise-soa--part-2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c1cb4b2c-0e01-0010-c99e-c272197d970f
3.XI and SOA
SAP XI in SOA
4. /people/community.user/blog/2007/01/30/enterprise-soa-explorations-fragments
/people/sindhu.gangadharan/blog/2006/06/19/it-scenario-enabling-enterprise-services-with-sap-netweaver
5. /people/abdulla.fawzi/blog/2007/01/03/enterprise-soa-based-innovations-and-its-benefits
EAI & EBI
EAI
EAI and EDI
Also see this document on this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
Regards
Chilla

Differerence betwin distubution rules and settelment rule

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Hi gurus any doby explain the difference betwin ditibution rule and settelment rule.

Hi friend,...
The distribution rule is part of the settlement rule. You specify the following for a settlement sender:
Settlement receiver
Settlement share (percentage or proportional)
Settlement type (periodic or cumulative)
Validity of the distribution rule
The system automatically assigns a settlement rule to the production order when the order is created. The assignment is carried out via the default rule defined in Customizing.
The settlement rule includes one or more distribution rules for the production order. The distribution rule consists of a cost receiver, a settlement share and a settlement type:
The settlement receiver determines to which cost object the actual costs of the production order are to be settled. Possible receivers include
a material
a cost center
an internal order
a sales order
a project
a network
a fixed asset
The settlement share determines the percentage rate or the equivalence number to distribute the costs to the individual cost receivers.
The settlement type determines whether all the costs are settled which were incurred for the order (full settlement) or whether the costs collected on the order are to be settled periodically (periodic settlement).
for more details u may go the following link...
http://help.sap.com/saphelp_47x200/helpdata/en/e9/7a0716cde011d19eb4080009b0db33/frameset.htm

Link, Rules and KPI

Similar Messages

Maybe you are looking for