Link(s) on how to move PC stuff to a new iMac

I need to transfer stuff (all stuff) from a pc to a new iMac.
I know there is a guide "switch to a mac", but that seems to just help you or convince you to switch to a mac. Doesnt really list details on moving-transfering your files and such. I would like to know how to transfer all files and settings from a PC machine to a new iMac. And do it right.
Ps. I dont use itunes on the pc so do not need help with transfering itunes media.
Message was edited by: randym431

Hello randym431
Does > http://support.apple.com/kb/HT2518 help?
Unfortunately your windows settings can not be transferred to OS X, you will need to do the basic's during setup and then later change or adjust the System Preferences to accommodate your needs.
See > http://www.apple.com/support/mac101/
Lastly if you choose to run windows on your iMac, there is an entire Forum Category called Bootcamp that is dedicated to running windows on your iMac.
http://discussions.apple.com/category.jspa?categoryID=237
Dennis

Similar Messages

  • How to move photoshop cs6 to a new computer

    how to move photoshop cs6 to a new computer

    1. Be sure you have your serial number.
    2. If you have only used one of two installs, install and activate on your new computer (as a precaution), then proceed to step 3. If your second install is currently used, proceed to step 3 without installing.
    3. Deactivate on you old computer and uninstall. To deactivate, open Photoshop and go to Help>Deactivate.
    You may use Photoshop on two computers at any one time. By deactivating, you may change to different computer(s).
    You can find the installer here: Download CS6 products
    Benjamin

  • I bought a license for Lr a few years back and installed it on a mac laptop.  I want to move that license to my new iMac and remove it from my old laptop. How?  Thanks!!!

    I bought a license for Lr a few years back and installed it on a mac laptop.  I want to move that license to my new iMac and remove it from my old laptop. How? 
    I downloaded Lr on the new iMac but there does not seem to be a way of "registering" the software to give it functionality. 
    Thanks!!!

    Your Lightroom License key is,
    1. Cross platform Mac and or Win.
    2. It is a single user / owner.
    3. You can have two installations active with one in use at any point in time.
    4. There is no deactivate process like other Photoshop products.
    5. You can uninstall / install as many times as you need as long as you keep the spirit of the license.
    6. The license key is specific to the Lightroom version, i.e License key for LR 4 will not work for LR 5.
    7. You can upgrade i.e. purchase from any version of Lightroom 1,2,3,4 to the latest LR 5.

  • Is there a way to move a group of tabs to a new window? I know how to move one tab to a new window, but is there a way to mark a group of tabs and move them to a new window?

    Is there a way to move a group of tabs to a new window? I know how to move one tab to a new window, but is there a way to mark a group of tabs and move them to a new window?

    * Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

  • HT201269 how to move itunes music to my new iphone

    how to move my itunes music to new iphone

    Exactly as described in the tech note you were reading when you posted your question.

  • How to Move Adobe CS5 to a new computer; 1 licence

    How to Move Adobe CS5 to a new computer? We have license for 1 computer. Afraid if I uninstall on original, that I won't be able to re-download the Suite onto the new computer and lose access altogether... What is the process to migrate software & the license?

    Moving this discussion to the Downloading, Installing, Setting Up forum.

  • How to move Closed Notification to a new user?

    How to move Closed Notification to a new user? Anybody help! Thanks!

    Hi,
    The ideal scenario is that you don't notify a user - you notify a role instead. Roles don't get sick, get made redundant, retire, leave etc. etc. - however, it's easier said than done.
    Although it's probably not supported, I can see no harm in doing a direct table update on WF_NOTIFICATIONS to modify the recipient role. However, I would question the logic of keeping old notifications in the system - if you run the standard purge routines (and you should be!), then that will clear out the old notifications automatically.
    Additionally, I would be wary of reassigning old notifications - it would blow the audit trail completely if you move a closed notification between users (which is why there is no API for it). If Bill approved a purchase order for £1 million, and then left, I would expect (and need!) the history to shown exactly who did it, rather than a completely different user.
    I'd be astounded if Oracle does anything with any enhancement requests for Workflow any more, even if they were for things that made sense.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

    Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
    I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
    I've attached screenshots of the About This Mac section hoping it may help shed some light.
    Thank you in advance for your help!
    PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
    <Image Edited by Host to Remove Serial Number>

  • How do you install logic on the new imac if there is no disk drive?

    How do you install logic on the new imac if there is no disk drive?

    Dj Generator wrote:
    [There] must be other options, i would rather not spend £70 on a disk drive or £140 on the software again??
    Hmmm? A quick google search for external optical readers turns up many in the $20-$40 (USD) range. Didn't convert to £ or include any VAT charges, but you should be able to get something significantly cheaper than £70. That's your simplest solution.
    iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

  • How much faster or better is the new iMac... really?

    Hello all,
    I have a 20" 2.33Ghz C2D iMac w/256Meg video RAM, and 3Gig of RAM. I understand that many factors come in to play when you compare the over all speed of a computer. How much faster, over all, is the new iMacs over the system I have? Has anyone tested the two next to each-other yet? I am sure the new one is faster in some ways, but is it really lots faster in over all performance, or just a little?
    Apple //GS

    Hi Patrice,
    Within Apple’s slim new 21.5- and 27-inch iMacs are NVIDIA GeForce GPUs, based on our new Kepler-class architecture, which helps make them up to 60 percent faster than last year’s models. This follows news in June that Apple’s 15-inch MacBook Pro with Retina display uses Kepler GeForce GPUs.
    The new 27-inch iMac offers the GeForce GTX 660M as its base GPU, with even faster GeForce GTX 675MX or GeForce GTX 680MX GPUs available. The 21.5-inch model comes with the GeForce GT 640M GPU, with an available upgrade to the GeForce GT 650M GPU.
    http://blogs.nvidia.com/2012/10/big-imac-news-less-heft-more-kepler/
    So, any Apps that use the GPU to assist GPU should be much faster.
    Though I don't see it listed here, it may be too new, I suspect it may be supported...
    http://www.adobe.com/products/premiere/tech-specs.html

  • I have a MacPro 1,1. Is there an easy way to move my applications to a new iMac?

    I have a MacPro 1,1. Is there an easy way to move my applications to a new iMac?

    You'll be given the option to migrate them and your other data when setting up the new iMac.
    (101589)

  • How much RAM should I install for new iMAC ?

    Hi,
    How much RAM should I install for new iMAC* running Logic Studio? It comes with 4 GB - is that enough? (can you run in 64 bit mode..)
    *(The 21.5" 3.06GHz Intel Core 2 Duo)
    Also, I was planning to get the stock 1 TB Hard Drive & save projects to an external drive.
    Does that sound reasonable?
    Any other recommendations?
    Thanks,
    Wm Heart

    Unless you plan on running huge projects with enormous sampled instruments, 4 GB will do (very) fine. And your disk plan is sound. Choose an external Firewire drive, rather than USB. FW is easier on the CPU and can handle more tracks than USB.
    What you should get, instead of more memory, is a (24 bit) external audio interface, if you want to do serious recording and playback.
    What type of audio interface you'ld need, depends on what you want to do with it and of course your budget. From decent to brilliant costs from roughly 100 to several 1,000's of europounddollars. Avoid the 16 bit ones, they're worse than the inbuilt audio chip of your iMac. You can recognize 16 bit Audio Interfaces (in webshops) by their prize (often under 100€£$) and the lack of mention of their bitrate.
    HTH
    Regards, Erik.

  • How to move my user account to new SSD?

    I just received my new mid-2011 27" iMac with the 1TB HDD and the 256GB SSD.  It came from the factory with the /Users directory on the SSD, which is not a good idea (at least for me) due to the size of my iTunes library, movies, documents and other stuff.  Can I move /User/"myUserAccount" from /Volumes/Macintosh HD to /Volumes/Macintosh HD 2 (as the HD is named)?  Surely this is possible, but I don't know the correct way to do this.  Any help would be appreciated.  And if anyone has general advice on how to properly use the SSD I would appreciate that too. (Stuff like what to put where, etc.)
    Thanks!

    Leave your user account's alone!!!!!! All you need to move are the data files. What takes up a lot of space is music, photos & movies. If you move those libraries to your internal HD that will take care of things for you. Here are Apples instructions for moving them to external HD's however you can use your internal HD the same way.
    iTunes: library on EHD
    iPhoto: How to move the Library to EHD
    Roger

  • How to Move My Library to a New Location

    The title is a bit misleading.  This is actually related to a previous discussion I started but never got any feedback on.
    Here is the situation:
    I have iTunes Match.
    For whatever reason, my iTunes library got hopelessly muddled and confused.  Probably user error.
    I decided to move the library to a new location (different external hard drive).
    I completely uninstalled iTunes and all Apple software from pc.  (yes, i have a mac but easier to keep this on the desktop).
    I reinstalled iTunes, but something is still there, because my library immediately showed up.  I turned off iTunes Match, updated the preferences to point to the new location and turned iTunes Match back on. 
    iTunes does not "see" my new library location, and tells me that all music is only in the cloud.
    How can I make it re-scan the hard drive and recognize that the music is all there?
    The big problem this causes is that, as I add music, it's impossible to tell what is really physically there and what needs to be downloaded.
    Thanks for any suggestions or help.  Perhaps I need to uninstall in a more thorough way, if so, I welcome help with that.

    Thanks Cander.
    I've been syncing my iPod this way since I first got my 3Gen iPod a few years ago (i'm on my 4th ipod) - and I know they've made improvements to iTunes.
    Is there a better way to achieve what I wanna do with just 1 computer?
    Is there a way to manage 2 or 3 iPods on 1 computer using seperate "itl" or "xml" files for each iPod's library?
    As it is now, I still have to go to My wife's computer and "add files or folders" to her library to get the newest tracks to add to her library - and over the network, it could take a full day If I did the whole library. Instead I write down what I've added on my Mac and just go through on her computer and add those folders.
    I've read some things about holding down a "shift" or "command" key to select a library on iTunes startup... (part of my discovery on how I F-ed up my library when moving it in the first place)
    Would this be the way to achieve that?
    Can I have 3 seperate data files that manage the preferred tracks for 3 different iPods?
    Would I have to update all 3 data files or would they all stay current when I added tracks?
    EDITED - well wait...!
    I'm reading this:
    http://docs.info.apple.com/article.html?artnum=300432

  • How To Move iPod & iPad Content To New Mac

    My family has been syncing our iPods & iPads to one iMac's (Running OSX 10.9.1) iTunes (11.1.4). I got my daughter a MacBook (same OSX & iTunes) and want to sync her iPod & an  iPad to the new Mac, but without loosing the content form each device (Apps she dowloaded from the mobile devices & their settings (like game progress, etc.)..
    I don't seem to be able to find any solution that works. Migration Assistannt did not work.
    Any help would be appreciated.

    A device can only sync to one library at a time.  You need to put a copy of the library on her computer.
    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the iTunes Library.itl file in the moved iTunes folder.
    For the record there's this reference for iTunes 11 but it really doesn't strike me as having the specifics you need. iTunes 11 for Mac: Move your library to another computer - http://support.apple.com/kb/PH12168 
    If you put it in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)

Maybe you are looking for

  • A simple question on random number generation?

    Hi, This is a rather simple question and shows my newbieness quite blatantly! I'm trying to generate a random number in a part of a test I have. So, I have a little method which looks like this: public int getRandomNumber(int number){         Random

  • Nano Wont Update Songs!!

    Ok so ive had my ipod for about 6 months and never had problems but the other day i updated it and for some reason it deleted everything from my NANO!! and then i tried to put everything back on but when i try to put songs on it it says "Songs on the

  • While Syncing Error - Session could not be established

    Hi - When I try to sync my iPhone 4 with my PC I receive the following error:  "iTunes could not Back Up the iPhone because a session could not be started with the iPhone." Any suggestions.  I cannot upgrad the software until I sync my phone.

  • 2 masters 1 details.. high priority please!!

    here is the scenerio: ==================== Block 'B' has two masters. The 2 masters are NOT realted to each other. My form has: One master block called 'A'. One child block called 'B'. one more block 'C'. -> A(one) to B(many) is an unbroken relations

  • How to Create a Droplet - Help Requested

    I'm trying to create a droplet. I made a script but when I try to drop files into it nothing happens. Help . . Here's the script on run display dialog "Print out Word 2004 documents" & return & return & ¬ "Drag Word documents (xxx.doc) onto this drop