Link software install 2 error codes 1706 and blackberry link .msi file cant be found

seems impossible to download and install link,
any ideas?

You are not the only one having problems installing BlackBerry Link. See this thread: http://supportforums.blackberry.com/t5/BlackBerry-Link/Cannot-install-BlackBerry-Link-on-a-Windows-7....

Similar Messages

Itunes install error codes 2503 and 2502

I have purchased a new PC for Windows and cannot install Itunes. I am getting error codes 2503 and 2502. My music is in the Music / itunes file.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Adobe Reader install error codes 1303 and 150210

I cannot install Adobe Reader XI 11.0.09 I get Error 1303, which is insufficient privileges to access directory c:\Program Files(86) (I have disabled my antivirus program), and setup error code 150210 which says Setup interrupted before Adobe Reader could be completely installed.I don't know what else to do. I need to have Adobe Reader on my laptop.

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Error Codes 1630 and 1722 when installing FSX in Windows 8.1

Multiple efforts to install Flight Simulator X Gold on my new 8.1 system always results in error codes 1630 and 1722 at the end of the installation process. Lots of searching the net suggests that this not an uncommon problem. After trying a
number of possible fixes suggested by a Microsoft Support Engineer in a thread on the Microsoft Community Forum without success, he referred me to this forum.
In summary: After initially transfering a working version of FSX from my XP machine to the new 8.1 machine with LapLink it worked flawlessly. A subsequent misdiagnosed printer issue by Dell tech support resulted in a refresh of 8.1 wiping out FSX (and
many other apps). Efforts to reinstall FSX from the either the original disks or a newly purchased set of disks both resulted in the error codes at the end of the installation process. Failed resolution efforts include so far include:
- All recommendations in kb/258496 (including Xcopy which appears not to work on 8.1 at all)
- Clean startup procedure from kb/331796 (8.1 froze up hard in trying it)
- System File Checker per kb/929833 showed "did not find any integrity violations".
- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
Bottom line seems to be that this is recurring issue with 8.1 and FSX but neither I or the Community Forum have been unable to find an effective solution. Any advice/help/recommendations would be appreciated. Will be glad to provide needed additional
info as needed.
Mark Davis

- Licensing Reset Tool program per kb/928080 resulted in: "Cleaning up Token Store at: C;\Program Data\Microsoft\SLDL\Software Licensing Failed to delete the token store ERROR --HRESULT 800405"
try this solution replied by Colin Vincent
http://www.justanswer.com/computer/7b2g4-using-fsx-years-when-loading-receive.html
you should post in this support forum
http://www.microsoft.com/Products/Games/FSInsider/community/Pages/

Why wont it download I keep getting error code 60 and 49. I un installed it and re installed it numerous of times

error codes 49 and 60.I followed to un install and re install numerous of times it isn't working

error codes 49 and 60.I followed to un install and re install numerous of times it isn't working

SQL Server Management Tools - Could not write value to key \SOFTWARE. Error code: 1406

Detailed Results:
Feature: Management Tools-Basic
Status: Failed
Component Name: Sql Server Management Studio
Component Error code: 1406
Error Description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
The first time the installer worked installing perfectly, but I needed an named instance of "SQL2008", so I removed the instances. After this re-installing is not working.
From past 3-4 days I went through most of the links which has provided solutions for error code 1406, and not having success for installing.
I have tried these options,
1) Ran the installer using "Run as Administrator"option. I am an Administrator user for the machine.
2) In Registry Editor, right-click HKEY_CURRENT_USER\Software, and then click Permissions. Click Add, type Everyone, and then click OK. Under Group or user names, click Everyone. Under Permissions, click to select Full Control in the Allow column, and then
click OK.
3) Uninstalled the Sql server product, and used Revo Uninstaller / CCleaner to clean the registry and the remaining files and folders.
4) Multiple versions of SQL installers have been tried (SQL 2008/2012/2014)
5) Logged in as local/Administrator for the machine, tried the similar steps.
6) The same installers are still working in one of the virtual machines for multiple times of installation and uninstallation without having any problems.
Please let me know, if needed further information. Please provide help for installing SQL server management studio.
Regards,
Ananth.

I have the same problem.
I can not install MSSQLManagementStudio. I suppose
that is not the fault of permissions
. I have tried to
install as an administrator
on the computer in the domain where the account has domain administrator permissions.The account is added to the local administrators.
I also have tried to install as local administrator
account after the removal of the domain.
With the same result.
Operating System Windows 8.1 Prof.
I have tried 2012, 2012with SP1 , 2012x86 , 2014. All with same result:
Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Other elements installs without any problem.
sql_ssms_Cpu64_1.log show that the problem is in that point:
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Microsoft\Microsoft SQL Server\110\Tools\ClientSetup,,BinaryType=0,,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SqlToolsPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=Path,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
MSI (s) (1C:C0) [10:32:51:834]: Note: 1: 1406 2: 3: SOFTWARE 4: 5
MSI (s) (1C:C0) [10:33:19:949]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
07/30/2014 10:33:19.949 [540]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
...... rest of the roolbaack next
As i the lines:
MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI i opening the root hive of HKLM/Softftware
and MSI (s) (1C:C0) [10:32:51:834]: Executing op: RegAddValue(,,)
and trying to Add Default Value.
What is impossible regardless of the
level of permissions.
Please provide help for installing SQL server management studin in any version
Regards,
Michael

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Error code -600 and all applications quiting unexpectedly

Hi all I need your help!?! I'm having a problem launching my programs. When I click or double click on a program, it will launch but will then immediately give an error saying "the application _________ quit unexpectedly." This is happening with all of the programs on my computer.
Second problems is with my files. I'm getting an error code -600 when opening up a file. That includes jpg. and doc.
Please Help

Hi,
2.5GB is dangerously low. I'd guess you have a 40GB drive, so you should try to keep at least 8-10GB free, which you can determine easily in the bottom of any Finder window. The maxed disc space could be causing problems to your system like sluggishness, but I doubt it is causing all your apps to quit unexpectedly. That is probably more related to some kind of directory corruption. So, what do you do? Usually when apps start crashing unexpectedly the first step is to delete the preference file for the offending app. The preference file look like this, apple.com.iphoto.plist. All the preference files are in the same pattern, it's only the name of the app that changes. You'll find them at <hard drive/library/preferences< or you can just search the individual app preferences in the search box of the Finder window. Try deleting one or two for offending apps and see if they still crash. Also, because your directory is a bit funky you should run a maintenance app like Onyx. Install it and run Maintenance. It should sort out the directory issues to get your machine running again. Try these and post back with your results.
I also noticed your profile states 10.4.1. You should update to 10.4.11.
Onyx - <a class="jive-link-external-small" href="http://">http://www.titanium.free.fr/pgs/english.html
Make sure you get the right version for your OS.
Good luck!

Officejet 4630: Error code 0XB00A7A4E and it's all it does.

Hello, my Officejet 4630 had some problems, yesterday it asked me if I wish to install ne w firmware and I thought this would solve the problems, so I clicked ok.Now it does not do anything anymore.It displays error code 0XB00A7A4E, and beeps all the time. I took out the USB, the power, waited... same thing.The Online forum says that one should open it and take out the cartridges, but when I open it, the cartridges do not come to the middle, to the "removable" area. So it is completely stuck.Any help? Thank you!

Hello , Welcome to the HP Community!I hope you have a pleasant experience here. I'd like to help you with the 0XB00A7A4E error that you are getting on your HP Officejet 4630 e-All-in-One printer. Errors such as the one you are experiencing can either be caused by a firmware issue, or a jammed carriage. It can be difficult to tell which. One of the most common fixes for a firmware error is to plug the printer directly into a wall outlet. The printer has a power moderator built in, so if it is plugged into a surge protector or battery backup, it often causes a power fluctuation. This can result in firmware errors similar to what you are experiencing. I'd recommend trying this first. If that doesn't immediately resolve the issue, I'll get you to check the cartridge carriage inside the printer. Is it locked in position? Are you able to move it at all? If you can move it, I recommend uninstalling and re-installing the cartridges. If not, I'd recommend contacting our HP Phone Support for further assistance:Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your
contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone
number I hope this helps!

What is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

what is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
Above from:
http://support.apple.com/kb/TS3694

Failed install - error code 2 (CS4)

I had PS CS4 installed and running on a new HP Probook Notebook running Windows 7 Pro. The computer threw some error messages (I don't recall the specifics) and required a restart. Which initiated a system restore. The restore did get me up and running, but PS was missing. I attempted to reinstall and it failed. I've done the following:
1. Multiple attempts to install from CD.
2. System restore to the only date left after the crash (9-1) which was after the date I installed PS.
3. Attempted to remove PS with Windows - does not fully remove, file folders left.
4. Attempted to remove PS with Revo Installer (per HP tech assistance) - removed registry entries, but files persisted on drive.
5. Attempted new install. Program goes through process but finished with errors - indicated "Error Code 2" and nothing else.
6. PS and Bridge now on menu, but I get an error stating "Some of the application components are missing from the Application directory, please reinstall the application."
Which won't work. HP has sent me to Adobe for help. Thoughts?

Chicagodom the use of the system restore feature can often lead to unexpected results/behavior.
I would recommend running the CC Cleaner Tool to attempt to remove your current installation. You can find directions and the download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you continue to receive installation errors then please review your installation logs for the exact error message. You can find details on how to locate and interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4. You are welcome to post any specific errors you discover to this discussion.

Can anyone provide Error code list and causes for OBIEE10g/11g ?

Hi
Can anyone provide Error code list and causes for OBIEE10g/11g ?
Regards
Srini
Edited by: Srini on Feb 18, 2012 10:41 AM

Hi,
List of Bug Fixes Included In OBIEE 11.1.1.5.0
Admin Tool
•7538753 SAP BW IMPORT DOES NOT RETRIEVE UNIQUE NAME FOR MEASURE COLUMNS
•10012297 ADMIN TOOL CRASH ON VERY LARGE EXPRESSIONS – OVERFLOW AT APPROX 3200 CHARACTERS
•10032385 TABLE MISSING IN SQL “FROM” CLAUSE – FWD PORT 8308443 TO 11G
•10045212 EQUALITY EXPRESSION IN LTS “WHERE” CAUSES INTERNAL SQORRQLIST ERROR ON QUERY
•10264475 ADMINISTRATION’S “SHUTDOWN SERVER” MENU SHOULD BE REMOVED
•10265121 ADMIN TOOL EXPRESSION BUILDER CRASHES ON DOUBLE-BYTE LOGICAL COLUMN NAME
•10394725 ON-LINE MODE CHECK-IN OF DYNAMIC INIT BLOCK CAUSES [43058] REFRESH LOCK FAILURE
Answers
•6521146 ERROR: “NO FILTER” WHEN USING “COMBINE WITH SIMILAR REQUEST” – UNION
•7534635 INACTIVATING DRILLDOWN ON COLUMN VALUE ALSO INACTIVATES COLUMN HEADER LINK
•9026854 CLARIFICATION REGARDING DATA FORMAT WHEN COMBINING REQUESTS
•9107277 KEEP THE NUMBER PRECISION IN DATABASE WHEN “DOWNLOADING TO EXCEL”
•9524080 PIVOT TOTAL DIFFERENT TO TABLE TOTAL WHEN REPORTAGGREGATEENABLED TRUE
•9697529 JAPANESE CHARACTER SET NOT PASSED CORRECTLY TO DRILL REPORT IN FIREFOX BROWSER
•9871470 SORTING ON A NULL VALUED COLUMNS GIVES ASSERTION ERRORS
•9886904 CORRECT DOC FOR ADDING CUSTOM DATE FORMAT STRING
•9918283 CORRECT DASHBOARD FORMATTING PROBLEMS WITH SCROLLING
•9928318 ROW HEADER MISSING AT PIVOT TABLE VIEW FOR MIGRATED REPORTS IN 11G
•9968574 SOME UPGRADED 10G CHARTS SHOW UP JAVA EXCEPTION
•10023165 MAPS DO NOT WORK IN MAP VIEWS WHEN JOIN COLUMN CONTAINS A “&” CHARACTER
•10065166 GAUGE RANGE IS NOT UPDATED WHEN IT CHANGES THE FIELD VALUE
•10078041 ACTION LINK DOES NOT WORK WHEN COMPOUND LAYOUT ONLY HAS A MAP VIEW
•10091354 “SCALE MARKERS” OPTION IS MISSING IN VERTICAL AXIS 2
•10147762 CANNOT SET GAUGE FOOTER (TITLE), KEEPS SHOWING “UNDEFINEDUNDEFINEDUNDEFINED”
•10182955 BUBBLE CHART IS NOT BEHAVING AS EXPECTED
•10213761 CONDITIONAL DASHBOARD SECTIONS (GUIDED NAVIGATION) ALWAYS RUNS REPORTS
•10229397 CANNOT SAVE REQUEST USING STANDARD DATE FORMATS.
•10282140 CELL IMAGE AT BLANK CELL OF PIVOT TABLE IS NOT DISPLAYED WHEN USING COND FORMAT
•10296730 UNABLE TO USE PRESENTATION VARIABLE IN SCALE MARKERS
•10312496 CHARTS. MEASURE LABEL IN GRAPH PROMPTS DOES NOT CHANGE CONTENT OF THE CHART
•10312795 ACTION LINK ON COLUMN HEADING NAVIGATION DOES NOT CONSIDER PROMPT VALUES
•10329343 CLICKING A LINE GRAPH BETWEEN TWO DATA POINTS DRILLS TO LAST VALUE IN HORIZONTAL
•10337649 PIVOT TABLE SHOWS BUTTONS FOR SORTING ON CALCULATED ITEMS.
•10402102 INCORRECT RESULT WHEN USING [NEW CALCULATED ITEM] PROP IN PIVOT TABLE
•10414887 DRILL DOWNS NOT WORKING IN CHART PIVOTED TABLE SELECTED FROM VIEW SELECTOR
•10418875 CHART SIZE IS CHANGING AFTER WEBCAT UPGRADE FROM 10G
•10634175 GRAPH ENGINE IS NOT RESPONDING
•10639913 COMPLETE TEXT IS NOT SAVED IN DB IF CURSOR IS MOVED AWAY DURING INSERT
•11711658 FILTER NEEDS TO SUPPORT UNTYPE LITERAL FOR RANK OPERATOR AS 10G DOES
•11805468 CUSTOMIZED GAUGE VIEW IS NOT CONSISTENT WHEN EXPORTED AS PDF,HTML AND XLS
•11817696 INCORRECT FILTER IS BUILT IF FILTER IS CONTRUCTED BEFORE SELECTING REQ. COLUMNS
•11845286 PIVOT TABLE WITH PERCENTAGES, GRAPHED PERCENTAGE VALUES DISPLAYED ARE INCORRECT
•11894921 GRAPH LABEL OPTIONS NOT AVAILABLE IN 11G
•11895279 INCORRECT FILTER VALUE WHEN USING ACTION LINK WITH GRAPH
•12412666 ALL PAGES LOSES CONDITIONAL FORMATTING
•12561361 PSE FOR BASE BUG 10295403 ON TOP OF 11.1.1.5.0 FOR GENERIC OS
CHARTING
•8990756 MISLEADING INFORMATION IN DOC REGARDING PIVOT TABLE SETTINGS
DASHBOARDS
•7459700 ABILITY TO SPECIFY FIXED COLUMN WIDTH TO A DASHBOARD PROMPT
•10177865 OBIEE 11G : DEFAULT VALUES CANNOT BE DE-SELECTED FROM MULTI SELECT PROMPT
•10279722 DASHBOARD SLIDER PROMPT SHOWS THUMB VALUES WITH TWO DECIMAL PLACES FOR INTEGERS
•10279829 DASHBOARD SLIDER PROMPT SHOWS WRONG VALUES FOR “ALL COLUMN VALUES” OR “SPECIFIC
•10310511 “REQUIRE USER INPUT” MESSAGE APPEARS THE FIRST TIME ONLY FOR THE REQUIRED PROMPT
•10389799 DASHBOARD NAVIGATION MAY CAUSE GETELEMENTBYTAGNAME ERROR IN IE
•10411545 PROMPT WITH BETWEEN OPERATOR AND SQL DEFAULT VALUES ARE NOT UPGRADED PROPERLY
•11056057 ERROR WHILE UPGRADING THE DASHBOARD WITH CERTAIN FILTER FUNCTIONS
•11076452 ABILITY TO CONSTRAIN PROMPTS AGAINST A SLIDER PROMPT
•11717024 ERROR 500 OCCURS WHEN SETTING ACCESSIBILITY MODE TO ON
•12620143 PSE FOR BASE BUG 12561330 ON TOP OF 11.1.1.5.0 FOR LINUX X86 [46] (PSE #602152)
INSTALL
•9459177 PREREQUISITES FOR DEPLOYMENT ON SEPARATE MACHINES
•9540009 UNIXCHK.SH ENCOUNTERS HOST NOT FOUND ERROR WHEN DNS IS NOT AVAILABLE.
•10071302 ENTERPRISE INSTALL: CONFIGURE PORTS : FORMAT OF INI FILE
•10126542 OBIEE 11G INSTALATION FAILS AT AS INSTANCE CREATION DUE TO PERM SIZE ERROR
•10287335 CANNOT START BISERVER1 . SWITCH TO JSSE FRAMEWORK REQUIRED
•10302421 OBIEE 11G WINDOWS PROMPTS FOR USERNAME / PASSWORD AFTER ENCRYPTING CREDENTIALS
•11849674 SAG: DISCREPANCY IN DOCUMENTED ORACLE DATABASE REQUIRED FOR MAPVIEWER
MIGRATION
•7432799 ORACLE EUL CONVERTER CRASHED WHILE GENERATING A REPOSITORY
REL_NOTES
•12604761 TWO STEPS OF THE UPGRADE TO 11.1.1.5.0 ARE NOT CLEARLY DOCUMENTED
SCHEDULER
•10036466 “RE-RUN INSTANCE(S) NOW” MENU IS NOT AVAILABLE FOR COMPLETED JOB INSTANCES
SECURITY
•8996295 PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENTIFICATION
•9216995 PROVIDE LATEST DETAIL INFORMATION ABOUT HOW TO SETUP LDAP SSL FOR OBIEE
•10194154 TECHNOTES- PROVIDE DETAIL INFORMATION TO SETUP WNA(KERBEROS) FOR OBIEE AUTHENT
•10198837 BIEEHOME LOGIN PAGE IS NOT DISABLED EVEN AFTER ENABLING THE SSO
•10218031 USING EXTERNAL DB TABLE TO SET ROLES SESSION VARIABLE DOESN’T ACCEPT LONG NAMES
•10373788 IF OBJECTGUID PUBLISHED AND SAMACCOUNTNAME CHANGED USER CANNOT CONNECT ANYMORE
•11731080 QA:SECURITY GUIDE NEEDS UPDATE FOR DEFINING A USER SESSION VARIABLE
SERVER
•6510747 NETWORK FAILURE DURING PHYSICAL QUERY HANGS END USER WITHOUT ERROR MESSAGE
•6836444 OBIEE SERVER SYSTEM DATE IS WRONG AND DOES NOT MATCH MACHINE SYSTEM DATE
•8371912 BI SERVER CRASHES ON NAVIGATION SPACE MAP RACE – SR 3-887711721
•9433198 DOCUMENT SYSLOG ENTRIES IN SYSTEM ADMINISTRATOR’S GUIDE
•9696424 DOC INSTANCECONFIG PARMS ALLOWEDLANGUAGES & ALLOWEDLOCALES IN SYSADMIN GUIDE
•9954411 PSR:MOD_SUPPORTED NOT ENABLED FOR TERADATA AND CAUSES CAMPAIGN SLOW PERFORMANCE
•10258683 REQUEST WITH COMPLEX FILTER IS CONSUMING ALMOST ALL CPU & NO SESSION IS CREATED
•10258755 EXCEL FAILS TO CONNECT TO 11G BI SERVER USING ODBC DSN
•10335924 REPORT-BASED TOTALS FAIL ON MEASURES CONTAINING AGGREGATION EXPRS SUCH AS FILTER
•10374571 NEED FLEXIBILITY TO OVERRIDE HOSTNAMES WHEN CUSTOMER DNS IS INCORRECT OR BROKEN
•10650122 PIVOT VIEW WITH UNION OF NON – COMPATABLE TYPE ERROR IN OBIEE 11G AFTER UPGRADE
•11804596 NQQUERY LOG LEVEL 2 IS TOO VERBOSE – BACKPORT 10308263 TO 11.1.1.5
•11809295 NQUDMLGEN NOT GENERATING UDML FILE IN UTF FORMAT
UPGRADE
•9886765 ERRORS ENCOUNTERED WHEN UPGRADING WEB CATALOG USING UA.BAT
•10121344 ERROR IN LOG USING UA TO UPGRADE BI SCHEDULER SCHEMA ON SQL SERVER DATABASE
•11069928 UPGRADE SHOULD HANDLE PROMPT WITH INCONSISTENT VALUES AS 10G DOES
WEB_ADMIN
•8564456 SHARED FOLDER ACCESS PERMISSION ISSUE
•9381764 CATALOG MANAGER COPY FUNCTION NOT WORKING AS EXPECTED
•9739865 EXITING MANAGE SESSION RESULTS IN HTTP ERROR
•10016252 LACKING INFORMATION ON FORCEABSOLUTECOMMANDURL FOR ABSOLUTECOMMANDURLPREFIX
•10144989 WEB CATALOG DOES NOT UPGRADE TO 11.1.1.3.0
•10218524 VALIDATION ERROR AFTER THE UPGRADE OF WEBCATALOG TO OBIEE 11G
•11723425 INCORRECT DEFAULT VALUE OF DEFAULTROWSDISPLAYED IN THE INSTANCECONFIG.XML
•11827202 OPMN NOT STARTING AFTER SETTING UP THE REPLICATION AGENT
WEB_GNRL
•10191078 FILTER VALUES ARE RESET IN GO URL WHEN COLUMNS ARE SORTED OR RE-ARRANGED
•10360461 NEED ABILITY TO CONTROL NEW, DASHBOARD AND OTHER HEADER LINKS
•11780508 10G COLUMN FILTER PROMPT WITH PROMPTCAPTION ATTR NOT UPGRADING
•12416695 TOOLTIP EMPTY IN MAPVIEWER
WEB_INTGRT
•10294759 FMAP-REFERENCED IMAGES IN ANALYSIS HEADERS DONâ€™T APPEAR IN DOWNLOADS TO EXCEL
WEB_MKTG
•8692820 DIRECT DATABASE CAMPAIGN LOAD FORMAT COMBINED LISTS FAILS
•9908019 SAW SERVER CRASH WHEN LOADING A PARTICULAR CAMPAIGN
•9935859 UNGROUP OF SEGMENT BLOCKS CORRUPTS SEGMENT DEFINTION AND BAD COUNTS
•10331355 MOVING CRITERIA WITHIN A SEGMENT’S GROUP CORRUPTS THE INCLUSION OPTIONS
Thanks,
RM

Error Code -120 and saving waveforms

If anyone is experiencing "Error Code -120" inside Logic, or is getting an error that waveforms cannot be saved...
I just experienced this, and found a solution that worked in my case.
These symptoms can be extremely frustrating, because they seem to be permissions related, but you can get these errors even if you have ownership and write access to your Logic session and all associated project files.
Turns out, "Error Code -120" and inability to update waveforms can both be caused by a permissions problem in .Trashes.
In my case, I had a directory inside .Trashes on my project drive:
/Volume/MyDisk/.Trashes/501
and I didn't have write access to that directory. Created a whole SLEW of problems in Logic and in the Finder, including Error Code -120 and waveform update problems.
Removing that directory solved my problem (after several hours of pulling my hair out), and I thought this might be useful advice for others.
Cheers!
-James

I wonder if the immutable bit has been set? If that is the case, this article by Michael Conniff might help:
http://discussions.apple.com/thread.jspa?threadID=121976&tstart=0
The error code you are getting doesn't quite make sense. According to Mac Error codes, 120 means "The version of the "Mac OS ROM" file is too old to be used with the installed version of system software"--which doesn't seem to have anything to do with anything you are doing.
Francine
Francine
Schwieder

FPGA Code Generation fails with error codes 7 and -1

Hi all,
I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
Does anyone have any idea why LV would be looking for these files in the wrong subfolder?
Thank you,
Aws
Attachments:
Code Generation Errors.png ‏35 KB

Hi Aws_Khudhair,
What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
This forum also discusses a similar issue:
http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
Catherine B.
Applications Engineer
National Instruments

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.

Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

Link software install 2 error codes 1706 and blackberry link .msi file cant be found

Similar Messages

Maybe you are looking for