Link Styles aren't displaying in Preview or Browser
I have created my Adobe Muse site - Desktop, Tablet & Phone however on the Contact Us page for the tablet and desktop all of the text is highlighted and underlined in blue.
I did create a new Link Style and assigned it to all of this text although when I open the site in browser or preview it all i see is blue.
The text is just a normal font in a text box like the rest of the text on the website. I dont understand why its all turning into links? I dont mind this information being links I just need it to not be blue.
PLEASE HELP ASAP!!!
HI there.
It is on the following pages:
http://192.168.0.204:33333/Preview/pantry-magic/contact-us.html
http://192.168.0.204:33333/Preview/pantry-magic/tablet/contact-us.html
Thanks for your help.
Demi
Signature
Similar Messages
-
My nav styles aren't displaying correctly when viewing my blog on a tablet.
Hi Everyone
If anyone can let me know why the navbar on my blog dor2dor.com/blog isn't displaying corectly when i view this on a tablet or phone I would be much apreciative.
If you look a the site it only seems to be giving the nav bar a width of 320px where as when you view this on a normal PC it display fine. Also the main website dor2dor.com displays fine on the tablet & phone so im guessing its something to do with wordpress.
Any help would be greatly received as its really buggin me.
Thanks in advance
Will1 appears to be the one that is off the most.
2 is slightly off
You may have an extra fill assigned at the group level that is overiding the fill at the Path level. Doubleclick on the word Contents in your appearance palette to get to the path level. To fix you can delete the fill at the group level, or simply ungroup to break that attribute.
As Larry mentioned, posting the file is the best way to get an answer to this one.
If you cannot post the file, we will need to know what color document color mode, and the color type and values.
You can also check this setting. -
Dreamweaver CSS styles page goes blank after I preview in browser
Often, after I have previewed in browser, when I return to my CSS styles sheet it is blank. I need to then close Dreamweaver - it then crashes and reopen. This happens to often making it difficult to use dreamweaver. Any ideas other than re-installing or upgrading?
Thanks
adamHi Ken,
Unfortunately, this problem didn't go away with the re-install. It occurs maybe once every 5-10 previews.
I have Dreamweaver CS5.5 and Windows 7 on my PC. Once the styles sheet blanks after I preview in browser I need to close Dreamweaver (at which point it crashes and I need to do it through Task Manager) and load up again.
Regards,
Adam -
Links in email aren't working and ads aren't displaying in email either
Links in email aren't working and ads aren't displaying in email either. What settings should be changed to correct this.?
Go to settings>general> restrictions and see if anything has been turned on.
-
CSS styles disappear when previewed in browser.
I created a web site following the Getting Started tutorials in Dreamweaver CS6. However, when I preview in the browser, the main page shows properly but if i click a link, the other pages do not seem to attach to the style sheet - BUT the style sheet reference is present in the code. Any ideas?
thanksYou are close to correct, but not quite there.
If you have enabled the use of temporary files in PREFERENCES > Preview in browser, when you preview a page from DW, you will actually create a temporary page from the current one and it's that temporary page that is displayed in the browser. Why create a temporary page to preview? Well, if your page's code contains any root relative links (as opposed to document relative links) then those will not work if the page is previewed directly. When a temp file is built, those links in the actual page are converted to document relative links in the temp file, and this temp file is then handed to the browser to preview.
Why don't root relative links work in a preview? When the browser sees a link like '<link href="/path_to_file.css"', it interprets the "/" as meaning the root of the HARD DRIVE, not the root of the site (browsers know nothing about DW sites), and will not find the linked file at that location (for example, C:/DW_path_to_file.css"). When those links are rewritten in the temp file being previewed as '<link href="path_to_file.css"', it works fine since the browser knows that means to look for the *.css file in the same folder as the file it is previewing.
Make sense? By the way, this is how DW has *always* worked. -
For some reason, with one particular site I am working on,
when I preview my page, the CSS styles do not display - they show
as a default font. However, I know the file is linked and in the
correct location in the root folder. All the CSS shows up fine in
design mode and when i upload the page to my server, just not when
i preview in any browser.
it's just kind of annoying and slowing me down - any idea why
this might be happening?Is the stylesheet linked with a root relative link? Are you
using temp
files to preview the page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"BullocksTroy" <[email protected]> wrote in
message
news:e6na5l$egj$[email protected]..
> For some reason, with one particular site I am working
on, when I preview
> my
> page, the CSS styles do not display - they show as a
default font.
> However, I
> know the file is linked and in the correct location in
the root folder.
> All the
> CSS shows up fine in design mode and when i upload the
page to my server,
> just
> not when i preview in any browser.
> it's just kind of annoying and slowing me down - any
idea why this might
> be
> happening?
> -
Text Link Styles not working in Footer Section
I have a master page with a footer that has three columns of navigation text links inside.
In order to match my design I have created a customer text link style for these links.
However when I preview my site (in muse and browsers) the roll over effect (should show an underline) doesn't work.
I've searched the forums and found that someone else had a similar problem and it was down to them having a paragraph and character style stacked on top of one another. However I have checked this on my links and this is not the case.
NOTE: I have already successfully managed to create a similar style that resides in a side bar navigation panel in some of the sites internal pages and these link styles are working fine.
So, I'm not sure if the file has become corrupt or if I'm missing something that I've done wrong?
One question I have is at which point to you apply the text link style?
1. By clicking on the line of text to select it?
OR
2. By clicking further into the text box; as if you were editing it, then selecting all of the characters in the word you want to make a link. With the word selected, click on the style name in the Character Panel to apply it?
OR
3. as with the above example, once you have selected all of the characters in the word you want to make a link. Click on the Hyperlink drop down arrow (from the main toolbar) and choose the style name you wish to apply, from the drop down box 'Text Link Style'
NOTE:
I'm running version v2.3, Build 50, CL 771675
AIR Runtime: 3.5.0.600
UPDATE:
I couldn't wait any longer, so I just deleted the text boxes and styles and re-created them both and they seem to work now. Lot of additional work though that I'd rather have not had to do.Sorry, I forgot to say, to see how the email link at the
bottom of the page should look please see www.bethhockley.com
Thanks,
Beth -
Will not display images in preview in browse
Hello:
I am new to fireworks and am attempting to make a simple pop up menu but am having trouble viewing the image. First, I converted a .jpeg image to a button. I then put menu pop-up functions on this button. When I displayed it in preview with browser, the pop-up images displayed, but there was an "x'd" out image where the original should have been.
I was curious about why this was, figured that there was a problem with the file that I imported, and so I decided to just use one of the library's buttons. Again - the original button was "x'd" out but the pup-up functions displayed.
I therefore decided to go even more basic and simply painted an image gray and attempted to preview in browser. Again, "x'd" out image.
Can someone please tell me how to fix this?? It is driving me INSANE!!!!
The crazy thing is that earlier this morning, everything was working just fine. The images would display perfectly. Now, they are gone and I am at witt's end trying to figure out what the heck is going on.
If ANYONE could please help me, I would be in such gratitude.
Thanks
Ben (noob to web design)If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage -
Error Displaying Portlet Preview created from Content Server templates
I created portlet from content server announcement portlet template.Whet put on the page this portlet shows the following error message:
Error Displaying Portlet Preview.Error Getting Content from Portlet.
Same error with portlet created from the news template.If the link exists in TOA01, why is the dosumnet not visible ? When i use the Function Module ARCHIVOBJECT_DISPLAY, i get the error -
Error when opening document with HTML control:DP_ERROR_GENERAL
Can someone please let me know what are we doing wrong ?? -
Styles Aren't Applied in Microsoft Edge F12 Tools
Applies To: Microsoft Edge F12 Developer Tools
Release: Windows 10 Insider Preview SDK and tools, April 2015 release
Issue:
Inline styles aren’t being applied when edited in the DOM Explorer.Workaround
None. -
Having a problem displaying my links correctly using a linked
style sheet. The links at the bottom of my pages behave properly,
except for the fact that all of the links should be underlined, not
just a select few. They all behave properly upon roll-over, but in
a non-active state they all should be underlined. Everything
appears to be fine in Dreamweaver, that is, all links are
underlined.
Page:
http://relaxonmarco.com/
CSS:
http://relaxonmarco.com/ROMstyles.css
Any help is greatly appreciated!You have the visited state of the link set to no underline...
so once a link
has been viewed, the underline disappears.
a:visited {
color: #FFFFFF;
text-decoration: none;
Change it to text-decoration: underline;
if you want it to remain underlined.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"trevisc" <[email protected]> wrote in
message
news:fentp8$pee$[email protected]..
> Having a problem displaying my links correctly using a
linked style sheet.
> The
> links at the bottom of my pages behave properly, except
for the fact that
> all
> of the links should be underlined, not just a select
few. They all behave
> properly upon roll-over, but in a non-active state they
all should be
> underlined. Everything appears to be fine in
Dreamweaver, that is, all
> links
> are underlined.
>
> Page:
http://relaxonmarco.com/
> CSS:
http://relaxonmarco.com/ROMstyles.css
>
> Any help is greatly appreciated!
> -
Can't get template to preview in browser with style
Hi, I made a template page ( hurray for the newbie!) I wrote
some quick stuff in it just to test it out, but when I preview it
has NO style. Only blank boxes where photo's should be, no columns,
nada! If I recall I went to file>new> page from
template>selected Main( which was the template name> clicked
the Update button on that screen, then clicked create. page came up
fine. I wrote some script, hit save as, wrote in something.html ,
o.k., then tried to preview in browser, no style at all. I'm
missing something, but what? Anyone else have this problem?
Thanks!Let's see the page. There are several things I can think of
that would
account for this....
1. Your link to the stylesheet is a root relative link, and
you are not
previewing with temp files enabled
2. Your stylesheet is linked improperly
3. Cosmic rays
A glance at your code will likely reveal the cause.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"kidcoconut" <[email protected]> wrote in
message
news:fpjttj$a9t$[email protected]..
> Hi, I made a template page ( hurray for the newbie!) I
wrote some quick
> stuff
> in it just to test it out, but when I preview it has NO
style. Only blank
> boxes
> where photo's should be, no columns, nada! If I recall I
went to file>new>
> page
> from template>selected Main( which was the template
name> clicked the
> Update
> button on that screen, then clicked create. page came up
fine. I wrote
> some
> script, hit save as, wrote in something.html , o.k.,
then tried to preview
> in
> browser, no style at all. I'm missing something, but
what? Anyone else
> have
> this problem?
>
> Thanks!
> -
How to create a report in Form line Style and can display Image field?
Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnpHere you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers -
Portlet Item Attr: "Link That Displays Item in New Browser Window"
I have been searching the forums for a similar experience, but haven't found anything quite like this:
I have a couple of portlets. One is a Discoverer Portlet, the other is something more basic: The "Developer News" portlet from the 9iAS Community portlet provider.
After defining the portlets and looking at them, I edit the page and click the Edit button (little pencil) to edit the attributes.
There are radio buttons for Display Options.
One option is: "Link that Displays Item in New Browser Window."
When I select this, OK, and then go back to the page, **the portlet doesn't show at all any more! There is no link, no nothing. Note that I have defined a Display Name, which should be the text for the link.
It would seem that this feature flat out doesn't work.
This technique for a popup works fine for an "Item" defined in an item region.
Anyone?Yes -- I did do that after reading an article on metalink about such issues.
This actually changes the problem.
When I add the "Display name and image link" attribute to the region, I now do get a link.
However, clicking it brings up an undefined Discoverer portlet.
It works great for non-Disco portlets. For instance, I was able to pop up the "Developer News" portlet from the Oracle 9iAS Community portlet provider.
I think the problem is that the link that Disco produces does not provide enough information to bring up the particular portlet. For instance, the URL does not have the workbook name, the worksheet name, the parameter values, etc.
If anyone uses Disco w/ the portal, I would be curious to hear if anyone can reproduce this apparent bug / limitation. -
How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it. New macbook pro with LION OS
Just drag the divider line between the preview pane and the message list all the way to the edge so the preview is completely closed. Selected messages will open in a new window with a double-click or the return key.
Maybe you are looking for
-
When I click on my mail icon nothing happens...it won't open or quit (so I can't shut down my computer). What's going on?
-
Trying to add items on iplayer
Trying to add items on iplayer but it keeps coming up with this message add Adobe Reader to be installed which i have installed. Any help would be good.
-
Synchronizing while loading the Source database
Hi, can someone explain the impacts of synchronizing and loading the source DB at the same time? We have partitioned the cube by branches and month. Now the first branch delivers data and we are processing the Dims and the partitions for this branch
-
PS Displaying Colors Oddly...
I can't seem to figure this out (ive done a couple hours of research on the subject via google). When I Save For Web the color shifts. It becomes more vibrant (which I would prefer...). I have reset the settings for photoshop followed by a uninstall/
-
Downgrading to 9r47 help with installer
We are trying to downgrade 800+ or so client computers from flash player 9r115 to 9r47. The installer flashplayer9r47_win.exe doesn't seem to have a silent install. Does anyone know how we can do this? regsvr32'ing the ocx is not enough. Also you can