Link Title To Video Clip - PE8

How do I link a "title" to a video clip so that it is locked and cannot shift when editing or deleting clips?

As you add or delete clips to and from your timeline, it should "ripple", keeping all of your clips in the same positions, relative to each other, but shifting all of your movie right or left as needed as a group.
Is that not what's happening?

Similar Messages

  • Breaking Link Between Audio/Video Clips

    Although this question I'm sure is simple, i'm not finding it in any of the documentation.
    I need ONLY the Audio portion of some of my Audio/Video Clips. I can't break the link, so that I can slide the Audio Clip around on the time line. Thanks for any info you can provide.

    Either hold down the OPTION key before you click on the audio, or look on the button bar above the timeline on the right. There are two default buttons, one being LINKED SELECTION. Turn that one off and audio and video will disconnect.
    Shane

  • Linking Video Clips

    Hello,
    I am wondering if there is a way to link a secondary video clip to my primary video clip so that I can move one and keep the other positioned correctly.
    I know you can do this with things like audio, but when I try to link my two video clips together, the command "Link" under the "Modify" menu is grayed out.
    Thanks,
    Matt

    You can make a new sequence and copy and paste the clips into the new sequence. Use the new sequence like a clip, nested into the master sequence. That's the only way to link video elements.

  • What is the easiest way to use a video clip as the DVD's menu and have titles?

    Ok, I"m using Ppro CS4, and I have a clip that i would like to be the title screen when the DVD starts.  I then want to click on something like Play movie that will play the movie.
    I want the Menu to be the actual video clip playing in the background.  I am going to be importing several projects from CS3 into the fished version and would like these to be set up as seperate from the main movie......but something that can be clicked on and watched.   (I guess I'm wanting titles)
    any help would be appreciated.  I have searched around and kind figure out how to do this.  Do I need to use AFter Effects, or Encore, or what.
    thanks a ton
    Mo

    I would suggest that you post this to the Adobe Encore>Menus & Buttons forum. What you want to do, if I read correctly, is pretty simple. There will probalby be links available to step you though it. I'll look for this there, and start gathering some links.
    Good luck,
    Hunt

  • How do you link two audio clips to one video clip?

    Hi guys,
    I want to think multiple audio clips to one video clip and aint know how to do it! I found this page on Adobe knowledge base:-
    http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS1c9bc5c2e465a58a91cf0b 1038518aef7-7f40.html
    It says you can do it but I don't think it explains how? Can anyone provide me with the simple steps required to link two audio clips to one video clip? Many thanks.

    Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
    But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

  • Is there a way to "link" 2 video clips?

    Hi,
    I have a single 3 minute split screen video scene (in the timeline) that is made of 2 video clips. Can I link this pair of video clips?
    It would make resizing easier if I only had to scale a single wire frame, instead of having to try to resize both clips to match each other for nesting?
    Thanks,
    humbucker
    Message was edited by: humbucker237

    Hi Michel,
    My S1 has several clips it it. I am dividing my finished video into 4 equal sections on the screen, for the entire video, and there are lots of tracks in the timeline now.
    If I move S1 into S2 with just the 2 tracks I want active, it transfers perfectly as a single track.
    Here is the problem. When I return to S1 and make active other tracks, the other tracks also become active in S2, overwriting the 2 tracks I want linked. Or, if I deactivate the tracks in S1, the timeline is S2 still shows the track in the timeline but blacks the screen out.
    I want to be able to make 2 video clips into a single track for easier editing in S1, is that possible?
    Thanks for your help,
    humbucker
    Message was edited by: humbucker237
    Message was edited by: humbucker237

  • After Mavericks upgrade I lost  the current I Movie project I was working on.  All that is left is the video clips, no photographs, music, transitions or titles. Three weeks work gone!

    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.

    rob2433 wrote:
    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.
    It should still be on your backup drive. Try reimporting it.
    Pete

  • How do I add a title to a video clip w/ LiveType 2 and Final Cut Express 4

    I have Final Cut Express 4 & LiveType 2.1.4, I'm not sure how to add titles or test to a video clip, and the tutorials for Final Cut Express 4 don't say how to get started in LiveType. How do I simply add text? The tutorials say how to add effects to the text they just don't say how to add it to the clip or how to get the clip into LiveType.

    Well, you don't actually _add text_ to a video clip, you _create a text clip_ and add that clip to your timeline, either adjacent to an existing clip or on the next higher track if you want to layer the text with an existing video clip.
    The very simplest way to add text is to use one of the *text generators* built into FCE. Lower Third, Text, Scrolling Text, etc. allow you to create various text clips and give you basic controls over fonts, positioning, size, color, etc. You can find the text generators in the Effects tab in the FCE Browser.
    LiveType is a separate and more sophisticated application that enables you to do all sorts of things with text (much more than can be done with the FCE text generators). The basic process is - create your title in a LiveType project. Save the LiveType project. Then in FCE, import the LiveType project; from there, you can treat it just the same as any other clip.

  • Video Clips.  Embed them or link them for faster loading?

    Hello All,
    Which method is better for iWeb (making the website load faster): I need to show some short video clips on the site I'm building, so should I embed the clips or just have a link that will redirect you to the site the has the clips (a site like Vimeo.com). Or does that make any difference in the loading time>
    Thanks for your help.
    Mike

    I found the problem with the software. You can not use Acrobat Professional 7.0 with FrameMaker 8.0 or you will not be able to properly Distil the PDF and the video will only be an image of the first frame. You are not able to install the Distiller 8.0 add-on that comes with FrameMaker 8.0 with the Acrobat Professional 7.0 installed. The console error received when creating the PDF is:
    "Save as PDF failed to post-process the PDF file for Flash Data: errors were encountered in the PDF file.
    The PDF file should be intact and usable but may not reflow properly. Check that the destination PDF file is not in use or its permissions, then Save as PDF again. If the problem persists, please contact Adobe Technical Support."
    The fix is to remove Acrobat Professional 7.0 permanently and install the FrameMaker add-on or to upgrade to Professional 8.0

  • Linking two video clips together

    I cannot find the way, how to link two video clips together so, that when moving one, the linked clip follows.
    Is there a way of doing that?
    The manual gives nothing with words: "linking video clips".
    Message was edited by: TRST

    You can't link video clips to each other. You can nest them. Put the two clips in a sequence the way you want them. Put the sequence with the two clips inside your master sequence. They will act as a single clip. That's the only way.

  • How do you animate a title placed over video clip

    I have been trying to animate a still title that I have placed over a video clip in expert view.  There is only one line.  I have followed the following which I think I got from the Adobe site: 
    Create a title with animated text
    You can easily apply a preset animation to any still title. Text animation presets quickly and easily
    animate the characters in your title so that they fade or pop characters into view, or fly in from the
    top or bottom of the screen. For example, using the Fade In By Characters preset instantly makes
    each separate character in your title fade into view until the title is complete.To preview an
    animation, position the pointer on the Animation tab in the Adjust panel.
    1. Do one of the following:
    In the Quick view timeline, select the superimposed clip. In the Monitor panel, click the clip,
    and then double-click the title text.
    In the Expert view timeline, double-click the title clip.
    The Adjust panel changes to display the text options.
    2. In the Adjust panel, select an animation preset under the Animation tab.
    3. Do one of the following to apply the preset to the title:
    Click Apply.
    Drag the preset to the Monitor window and drop it on top of the title text
    I have had no success no matter what I've tried.  I have a mac.  I would value any suggestions.
    Thanks.
    barb

    SG
    Thanks. But let me clarifiy what I suspect Barb's issue is
    a. not selecting the Text in the Text section of the Titler before applying the animation in Animation section of the Titler.
    or
    b. what I did not yet write, not using Default text since Text Animation does not work with Default crawl or roll
    or
    c. trying to use more than one line of text without the use of special procedures.
    (I sort of put this thought aside when I replied since Barb wrote
    I have been trying to animate a still title that I have placed over a video clip in expert view.  There is only one line.
    I interpreted that as only one line of text was typed in the Titler, not that there were two lines of text types.
    But, the answer should be one of the 3. More details from Barb should help us to pin point the problem.
    I think it was JohnnyO who first pointed out (your forum at few years back) that you can indeed apply Text Animations to more than one line of text in Premiere Elements Titler, but with the use of special maneuvers. I wrote about this and did a detailed step by step and overview on the matter.
    ATR

  • How Adobe Premier Pro's linked video clips are ID in Bridge?

    I just finished a FEATURE-FILM in HD comprised of 40 + different Adobe Premier Projects;
    Obviously, at the end you end up with many video clips associated to manyAdobe Premier Projects (i.e.; one video clip could be being used by 17 Adobe Premier Projects), and some video clips are associated to none.
    So this is the thing: I need to delete 5,000 + useless-not associated video clips, however, to make sure that I am not breaking any link, I need to know that they are, or they are not associated with any of my Adobe Premier Projects.
    How does Bridge indicate that a video clip is or is not associated (linked) to an Adobe Premier Project?
    Thank you in advance for your help
    Barro-THX

    Have you tried posting on the Premier Pro forum?
    A hint for future posts.  If you do not get a response in a reasonalble time rather than reposting, just reply to it yourself with anything and it will be moved to the top of the list again.

  • Title across all video clips

    I have 4 video clips that I would like to merge together in to one seamless video, add a song over the top, and add a title at the beginning to be present to the very end.
    I added the 4 clips and used the "none" or " | " transition between them making it seemingly seamless (heh).
    I was able to get the audio overlayed across them all.
    However, when I add the title, it only goes across the first of 4 clips.
    How can I get it to last the entire length of the video (all 4 clips)?
    Thanks! :-D

    timmyleeturner
    Please perform the following computer maintenance...
    a. Adobe Folder. Look for pile ups in the Adobe Premiere Elements Preview Files Folder and delete them. Look for pile ups in the Media Cache Folder (conformed audio cfa and pek files) and delete them.
    b. Edit Menu/Preferences/Media. In the Media Cache section, click on the Clean button to get rid of the conformed video (.mcdb) files.
    c. Run the ccleaner, regular cleaner and registry cleaner.
    http://www.piriform.com/ccleaner
    As far as you can determine how do the 10 differ from the 46 videos. What is the hard drive save location for these 46 videos and is that drive formatted NTFS or FAT32? The properties of those videos (aside from the .mp4 file extension) would be included in your exchange of information, along with project preset.
    Since you are working with a 32 bit application in Premiere Elements 9.0/9.0.1 with all the limitations of a 32 bit system, I am thinking that the issue probably goes to level of computer resources and maintenance.
    Let us see if we can sort this out. There are other avenues to pursue but the above seems more indicated at this time.
    Thanks.
    ATR

  • Matte and Title extend beyond Video clip???

    I have several clips in my timeline with associated mattes and titles in tracks above the video clips. I right-clicked on each the video clip and checked the duration of the clip under the speed window, and then copied-and-pasted this into the speed window for both the title and matte clips to make sure that the title and matte span the same duration as the video clip. The problem is the matte and the title are extending beyond the duration of the video clip.
    When I right click on the Matte and Title, the pop-up window indicates that the duration is (00:03:22;20), though when I click on Speed under the pop-up it indicates the duration is 00:03:22:14
    Speed is set to 59.27 and frame blending is checked.
    Any ideas of what is going on here?

    Summary of what I did:
    - I used capture now to capture about 30-minutes of video
    - I used the razor tool to cut out parts I do not need and to make the
    video into a bunch of clips
    - I added a black matte that I need to appear at the bottom of each clip
    - I added Boris Text that I need to appear at the bottom of each clip
    - I place the first matte and text in the timeline and copy it to the start of each clip, the text changes on each clip, so I double-click on the others and change it, the matte stays the same throughout the timeline
    The problem:
    - the matte and the text clips do not span the duration of each of the video clips and I am unable to physically drag them (extend them) to match the duration of the video
    - this is why I took the duration value of the video and tried to input the same value of the duration into the matte and title clips (after right-clicking on them) to force these clips to span the duration of each video clip
    - I did not change the value to 59.27 on any of the clips, it did this itself
    Am I approaching this completely wrong?
    Should I be copying-and-pasting the duration of the each video clip into some other location for each matte and text clip?
    Thanks for your assistance!!!!

  • Idvd 08 audio during the title main page, but not selected video clips?

    ok, i have idvd 08 and already added the video clips and a theme song to the title main page. i even did a preview to see what it would look like if it was to be played on a DVD player and it just the way i want it. BUT when i burnt it onto a dvd and tried to play it on the tv, everything looks fine during the title main page with audio, but when i select a video clip to be played it plays without audio...plz help!
    thanks!

    I took the videos from my sony cybershot through a USB cord, moved it onto my desktop and dragged it to the 'drop zones'. I don't know if this will help any but an example of the video format I'm trying to use is "MOV0144.mpg"

Maybe you are looking for