Link to a URL but not using popup

I am trying to access anHTML file that loads an interactive swf file created in Flash with external links to XML and graphic files. I need to present the interactive swf file and still have access to the navigation click boxes on the slide that loads the swf file. I have tried the open URL with New selected which gives me a popup. Displaying the popup requires that the learner close the popup in order to return to the base project.
Thanks in advance.
tgafford

Hi there
You could configure the popup so that it closed at the end of the play. But then again, you said it was created in Flash and not Captivate.
I'm thinking that perhaps you are wanting a Frameset in the HTML, but not sure. If you used a Frameset, you could then have navigation occurring in one frame while what you have navigated *TO* appears in another frame.
Cheers... Rick

Similar Messages

Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL.

Firefox 33.0.2 on Windows 8.1 64 bit. Since upgrading Firefox, it no longer accepts URLs in the URL bar - it works if I have a bookmark, a link or from History, but not if I enter or paste a URL and hit <enter>, in which case nothing happens at all.
I have found that issue reported for Ubuntu (https://support.mozilla.org/en-US/questions/1011935?esab=a&as=aaq) but not for Windows. The solution there to change the keyboard is not feasible since it's a laptop with a built-in keyboard.
I did not have this issue with FF 28 (I finally upgraded because I was getting BSODs) and I don't have this issue with any other Browser on same platform.
Any help appreciated.
Thanks.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Link works on mac but not on pc

Hi -
I am trying to insert a jpg into a dreamweaver file.
I then upload the html file along with the jpg to my server in a folder called "layout"
So the url is: http://www.mysite.com/layout/test.html
The link works on mac, but not on pc's.
Any idea why?
Some links work on pc's like this, and others don't.
Thanks- It's driving me crazy!!

The link is not correct....you have it listed as" mysite.com", which I assume is where you are to insert the name of your url.
Gary

Web sites containing mms links work in IE but not Firefox 4.0

Web sites containing mms links work in IE but not Firefox 4.0. when I play the video in IE, I go into IE, and locate the mms link under properties, when I right click. If I copy the mms link form IE directly into firefox, it will work. There ought to be a better way to do this. Also, I am using a hardware firewall, not a software firewall, and no proxy.

You need to use the file:// protocol, but you may still encounter problems if you fix that.
See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

Is there any way to have an ipad wifi 3G but not use the 3G (therefore avoiding the extra data plan costs) and just use the wifi?

i am looking to buy an ipad 2 or the new ipad (preferably 32gb) but dont want to buy the 3G version as i have unlimited data usage in my mobile phone plan, i know the wifi only ipad is generally cheaper, but i was wondering if there was a way to buy the ipad with 3G capabilities but not use the 3G and avoid the cost of paying the extra unnecessary data plan? (I know this is a really weird question but i have the opportunity to buy a 3G ipad and was curious of the possibility? any help would be greatly appreciated. cheers

Yes to your questions.
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
If you want an iPad 2 32GB it will have to be a refurb model. The only new iPas 2 is 16GB.
What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Should I Buy a New iPad? Or an iPad 2?
http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
iPad 3 vs iPad 2 vs iPad 1- Feature comparisons with iOS 5
http://ipadhelp.com/ipad-help/ipad-3-vs-ipad-2/
iPad Q&A
http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
A Few Questions (and Answers) About the New iPad
http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the- new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
New iPad: A Polishing of the Old
http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
iPad 1, 2 and New Specifications
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
If you think you may get an iPad 2:
Refurbished iPad Prices
http://store.apple.com/us/browse/home/specialdeals/ipad
New 16GB iPad 2 Prices
http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
When iOS 6 comes out in the fall, the iPad 3 will get Siri, but the iPad 2 won't.
 Cheers, Tom

Can I install the creative cloud on multiple machines but not use it or pay until activate it

I would like to install the Creative Cloud software on several machines now but not use it or pay for it on all the machines until the person using that machines needs it then they can pay to activate it. Is it okay to have the software installed on lots of machines but not activated?

Hi There,
If the software is installed on the machine and it is not activated, you would not be able to use it once the trial is expired after 30 days.
Whenever, you wish to use it, you can buy it and can start using it.
Thanks,
Atul Saini

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

If you made backups of all of your photos and your catalog file using some third-party method (i.e. not using the PSE catalog backup command), then you should be able to restore everything.
Step 1. Put the photos in the EXACT SAME LOCATION as before. For example, if they were in subfolders of C:\Users\<username>\Documents, then they must go into the exact same subfolders of C:\Users\<username>\Documents.
Step 2. Move the catalog file to wherever you want it to be, and then double-click on it.

Is there a way to purchase an app from the App store but not use the money I currently have in my iTunes account from a gift card?

Is there a way to purchase an app from the App store but not use the money I currently have in my iTunes account from a gift card?

The only way I know is to purchase it as a gift.

Corruption? - LIN_ATTACHMENT_RECORDs found but not used

Hi,
Since moving to GW 2014, a horrible problem has returned. We've used
GroupWise for as many years as I can remember, and some years ago, we
noticed on a regular basis, that emails were becoming 'corrupt' after
GWCHECK contents scheduled maintenance jobs had been run.
By 'corrupt', I mean we noticed numerous emails in shared mailbox folders
(not always shared folders though) were showing as 'posted' items, and the
header and property information was missing. Occasionally, all that remains
is a posted note with the subject, but most of the time it's the attachments
that are missing.
Now, our end users rely heavily on these shared folders, and there own email
mailboxes alike.
I assume the part of the GWCHECK log that refers to this behaviour is
"LIN_ATTACHMENT_RECORDs found but not used". I assume this because it
appears in GWCHECK content check logs occasionally, and when I first noticed
this issue all them years ago, it was present in the logs then too.
Can anybody help me out here? What is happening, and why? I will be under
real pressure to explain and solve this as soon as it is noticed once again
by my end users, and I can see from the logs that it's happened 3 times
since moving to GW2014...
Any help very much appreciated.
Thanks, Alan

Hi Andy, sorry for the delay.
This error from previous years, was attributed to something going on with
the filesystem. However, just like back then, there is no AV or 3rd party
product touching the GW filesystem, so I have to assume it's not that. The
file systems is EXT3, the server was built by a consultant, so I'm not
certain any specific tuning was done with the server. Back in the NW days,
NSS settings were essential to optimise performance.
The filesystem is not accessible to anyone.
Hardware - it's a VM on VMWare, the data is on the SAN, not dedicated
storage to the VM itself. It's the latest SP's of both SLES and GWise, as
far as I am aware, it was built less than 2 months ago.
The SR is open with Novell now, but they are waiting for me to try some
things that need to be done out of hours...
"1. Delete all the scheduled maintenance from the admin console.
2. Wait for 10 minutes
3. During non working hours, bring down the POA and MTA and any other GW
agent
4. Rename the wpcsin, wpcsout from teh PO folder
5. Rename the wpcsin. wpcsout, MSLOCALfrom the domain folder
6. Restart the Agents
You can then use schedule one maintenance on the PO to check if all's well."
I'm not sure if any of that will change things, will keep this thread
updated though.
Thanks, alan

Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

Since Febuary 14th, 2013 we are unable to send and recieve email using our hotmail account on our Iphone. We can get our email by loggin in with our computer but not using our Iphone.

Hotmail has been discontinued for some time now. See:
http://windows.microsoft.com/en-us/windows/outlook/auto-upgrade-outlook-faq

Youtube URL (but not links to Youtube from pages elsewhere) crashes all three of my browsers., Youtube URL (but not links to Youtube from pages elsewhere) crashes all three of my browsers.

All three of my browsers crash when I enter the Youtube URL <http://www.youtube.com> in the address window. Safari reports that the problem may be caused by my Adobe Flash Player, so I reinstalled that, rebooted. Didn't help. Google Help then suggested I empty the cache and remove all cookies. I did that (with Firefox). Also didn't help. Then I Repaired Permissions. That didn't help either.
But if I use Yahoo video search, or any other site's link to get to a Youtube video, there's no problem; the video not only plays, but once I'm in the Youtube site, I can navigate within it and play other Youtube videos. And when I bookmark a Youtube site, I can use that bookmark to return to Youtube.
The crashes occur only when I type Youtube's URL into my browsers' address windows. And since they occur with all three of my browsers, I have to think the fault is in my OS.
I have a G4 Mac laptop WITHOUT an Intel chip, using OSX10v10.5.8.
What might I do to fix this?
Further:
At about the same time the above problem arose, I could no longer play any FaceBook videos. Error message: "Upgrade to latest Flash player". But I HAVE the latest Flash version (10.0.12.36) that my NON-INTEL Mac, a G4 with OSX10.5.8. can support. And it had been working on FB.
(Note: the Adobe Flash Player site offering Flash upgrades for OSX10 specify that the upgrades are only for machines with Intel chips.)

Thanks!
But when I go to the link you gave me, I see a number of candidates for further download, three saying "Mac". Which should I use, please?
In the folder simply marked :10_1r102_64" are:
flashplayer10_1r102_64_mac_sa.app.zip @ 8.1MB
flashplayer10_1r102_64_ub_mac.dmg @ 7.6 MB
and in the folder marked: "10_1r102_64_debug" is:
flashplayer10_1r102_64_ub_mac_debug.dmg
I'll gladly install whichever one you say, but I'll be amazed (and delighted!) if that stops my browsers from crashing whenever I enter http://www.youtube.com in the address window. I can play youtube videos and navigate the site once I reach it using a link from another site, but if I enter http://www.youtube.com in the browser window and hit Return, the colored wheel rotates for several seconds, then the browser crashes. Happens with Safari, Firefox and Netscape, so I suppose the bug must be in the OS. I Repaired Permissions - didn't help. Disc First Aid verifies as OK.

Creating Links to Object but not using the record id field in the web add

Hello,
Im trying to create a link between OnDemand an another system but the other system is the source system so it will be creating the HTML Link based on values the user selectes.
What i am trying to do is create a link link the following:
https://secure-ausomxdsa.crmondemand.com/OnDemand/user/ServiceRequestDetail?ServiceRequestDetailForm.Id=ADSA-73J818&ocTitle=484426-429198955&OMTGT=ServiceRequestDetailForm&OMTHD=ServiceRequestDetailNav&ocEdit=Y&OCTYPE=&ocTitleField=SR+Number
but without "ServiceRequestDetailForm.Id=ADSA-73J818" at the end i want something like
https://secure-ausomxdsa.crmondemand.com/OnDemand/user/ServiceRequestDetail?ServiceRequestDetailForm.SRNumber=484426-429198955&ocTitle=484426-429198955&OMTGT=ServiceRequestDetailForm&OMTHD=ServiceRequestDetailNav&ocEdit=Y&OCTYPE=&ocTitleField=SR+Number
As this is not using the ID field, Is this possible can someone point me in the right direction on how i should start?

Hi Jonno,
It is not possible to use links to object without Id field. U can pass other values but Id is important- based on that only OnDemand identifies the record.
So what i would suggest is
1) Either use Id along with SR Number in ur source system.
Since what i understood is u are not creating new SR so u have the Id of the SR. Along with SRNumber save Id also in the external system
2) Or use Webservices to query with SR Number for the Id then use it in the link.
Hope this helps.
Regards,
Lemu

Web graphic links work on Mac, but not PC

I have two websites. The old one is DogToysAndTreats.com. The new one is FunStuffForDogs.com. I need to change the home page graphic on both of them to point to my shopping cart pages. I have done this and published the changes on both sites. It works on my Mac but not on my PC.
On www.funstufffordogs.com, the graphic at the top with the bulldogs is supposed to link to http://store.funstufffordogs.com/storefront.aspx. Same thing on www.dogtoysandtreats.com. It works on my Mac in both Safari and Chrome. On my PC, it doesn't work on IE, Safari or Firefox. (BTW, I haven't worked on any of the other links until I can figure out how to do it properly.)
I don't get why the platform has anything to do with it.
Lisa

Looking at your source, the problem may be that the images refer to an external server link from the one actually hosting the website page. Whenever you try to mix servers on a single page, you depend on the network connectivity being reliable to all the servers simultaneously. This can be as much a problem on a Mac as a PC. Sometimes routers have bad router tables, or internet providers do, and this can cause issues for multiserver websites. Using on your router & network settings an OpenDNS DNS server can help:
http://www.opendns.org/

Links work in Dreamweaver but not online

Hello, I am trying to figure out why my flash files work correctly locally but don't after I upload them. I am using Mac Flash CS4 and AS2. (They were CS3 files originally)
When I use Safari to view the uploaded files and check the Activity window it shows the files load but they don't show up. I have a main swf and others are loaded into it using:
on (release) {
loadMovieNum("flash/links.swf", 1);
Are there any known bugs/work arounds to be aware of? Thanks. -Derryl

Almost always when something works locally but not on line... it's a path problem. And I see that you are accessing your .swf from a sub file.... nothing at all wrong with that, but you do need to understand how pathing in Flash works:
Pathing issues
Almost always when it works on the local machine and not the server, it's a pathing problem.
You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location. So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
Best wishes,
Eye for Video
www.cidigitalmedia.com
Best wishes,
Adninjastrator

DB Link - works via SQL but not via packages

I have a database link on user ODB on database A, to database B. The DB Link seems fine for SQLs that i do, but doesn't compile in my package code. Please tell me why it works for "regular sqls" but not inside a package.
Example: while connected as ODB user on database A, if I do this query:
SELECT "TRAXDOC_DETAIL"."FILE_NAME",
"TRAXDOC_DETAIL"."FILE_TYPE",
FROM "TRAXDOC_DETAIL"@TRAXDOC_LINK
WHERE "TRAXDOC_DETAIL"."TRAXDOC_ROW_ID" = 100031 AND
"TRAXDOC_DETAIL"."TRAXDOC_LINE"= 2
It works fine. But the same query inside a package that is owned by user ODB on database A will not compile, stating the table/view does not exist.
The database link is owned by use ODB on database A, connects directly to the owner of the tables in question on database B.
Any suggestions welcome... this is an urgent issue, because it also worked fine on my customer's test environment, but not on their Production that they just upgraded. I need to know what to look for as to what could be wrong.

Thanks so much for your response - Prefixing the call to the table within the package, with the schema owner does indeed solve the problem. Since this is a Production issue, i have implemented this fix in my customer's database.
However, I would still like this issue permanently resolved. The next time we send out updated package code, this will happen again (unless we then fix it again). I'd still like info from anyone on what exactly must be done to allow the call within the package to work without specifically pre-fixing the table's schema owner. It shouldn't be needed... The DB link is connecting via the same schema on database B that owns the table in question.
pre-fixing the schema owner is something we don't do in our sql statements, and this has worked fine for many of our cusomer's environments. We're only seeing this issue on one environment.

Link to a URL but not using popup

Similar Messages

Maybe you are looking for