Link to another thread.

The FAQ says that you can create a link to both a thread and a message using tags. I just right clicked on a thread title, clicked “Copy Link Location”, pasted and saw a url with a messageID. But if I wanted to use the {thread} tag, what id do I use?

Where are you right clicking when you do that.
If go to the forum page for this forum and right click on the title of this thread and "copy link location" I get...
Link to another thread.
which is clearly the thread ID.
If however I do the same on your name under the "Last Post" column, I get...
Re: Link to another thread.
which I would expect as it's designed to take me to the last post which is a specific message.

Similar Messages

Lappy wireless with iwl4965 issues .. yes another thread

Another thread in the tonne I searched up and completely failed to find a solution to my problem in. Wish I could remember the ancient email I signed up for the forums ages ago with too =[
Anyways... Problem: All activity drops in mere seconds upon first trying to connect to any site...
I have the driver installed fine, along with wicd which has control of my wlan0 like it should, the scan of SSIDs turns up fine, I can connect to my network fine too.
I can get an IP addy just fine, I can ping external IPs endlessly.
I can resolve IPs it seems, I tried pacman with wget to make sure my IPs were being resolved properly, it always connects and gets the first few tarballs, then on one of them the speed (as reported by wget) drops from full speed to 0 over a few seconds, and it never picks up again, and fails to retrieve any more files.
http sites are the same, it connects for a second, then is endlessly waiting.
Would love to get this working, and I should point out I have no problems at all with my ethernet connection.
Any ideas guys?

i use the same driver as you guys for my
Intel Corporation Wireless WiFi Link 5100
and "network manager" and have no problem whatsoever.
To get my wifi working i had to copy the
iwlwifi-4965-2.ucode
file into "/lib/firmware".
Try doing the same, might work

Creating Ejb link to another Weblogic server

I am trying to create a EJB jndi link to another weblogic server from a weblogic
server.
Basically I have a web application that uses an EJB that is deploed on another
weblogic server and I would like to connect to it.
One way I can do is the remote lookup using the Hashtable and the context factory,
something like this
Hashtable props = new Hashtable();
props.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
props.put(Context.PROVIDER_URL, "t3://localhost:7001/");
Context context = new InitialContext(props);
I used a jndi-link in resin previously, that did not require me to do a remote
lookup and rather created a link at the server level and allowed me to do a direct
InitialContext() lookup.
<jndi-link>
<jndi-name>java:comp/env/ejb/test</jndi-name>
<jndi-factory>weblogic.jndi.WLInitialContextFactory</jndi-factory>
<init-param java.naming.provider.url="t3://xx.x.x.x:7001"/>
<jndi-lookup>ejb.test</jndi-lookup>
</jndi-link>
Can I do something similar in Weblogic? If yes, how can I do it.
Appreciate your help.
Thanks,
Varun

"Varun Garg" <[email protected]> wrote:
>
I am trying to create a EJB jndi link to another weblogic server from
a weblogic
server.
Basically I have a web application that uses an EJB that is deploed on
another
weblogic server and I would like to connect to it.
One way I can do is the remote lookup using the Hashtable and the context
factory,
something like this
Hashtable props = new Hashtable();
props.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
props.put(Context.PROVIDER_URL, "t3://localhost:7001/");
Context context = new InitialContext(props);
I used a jndi-link in resin previously, that did not require me to do
a remote
lookup and rather created a link at the server level and allowed me to
do a direct
InitialContext() lookup.
<jndi-link>
<jndi-name>java:comp/env/ejb/test</jndi-name>
<jndi-factory>weblogic.jndi.WLInitialContextFactory</jndi-factory>
<init-param java.naming.provider.url="t3://xx.x.x.x:7001"/>
<jndi-lookup>ejb.test</jndi-lookup>
</jndi-link>
Can I do something similar in Weblogic? If yes, how can I do it.
Appreciate your help.
Thanks,
Varun
hi,
Yes, it is possible in weblogic for more info visit this url,
http://e-docs.bea.com/wls/docs70/ejb/reference.html#1221067
u have the description of how to use the below tags
<initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
<provider-url>WeblogicURL:Port</provider-url>
<indi-name>jndiweb</jndi-name>
hope it help u
regards,
Elango TR

I have replaced my laptop and installed iTunes. When I try to sync my iPad or iPhone it says they are already linked to another iTunes library. How do I get back to my original library.

I have replaced my laptop and installed iTunes. When iffy to sync my iPad or iPhone it says they are already linked to another iTunes library and will only let me transfer purchased items. How do I get back to my original library.

Check out the solution found here.
If you do a restore you will lose everything. Some things will be backed up in iCloud but not everything.

Keymapping (follow up from another thread)

To follow up on another thread, I checked out the keymappings and found most of what I was looking for.
Only a couple of things I miss:
1. SHIFT + TAB doesn't pull the text back with it if the text is not selected. I am convised most editors do this and I keep find myself trying to do it in JDev and it doesn't work, and then I go in a huff.
2. Ctrl+K, Ctrl+L to perform a word match forwards or backwards, based purely on text in the document, ie. not syntax/context sensitive. This was one of my most used/most time saved features in Netbeans.

Hi,
don't understand what 1) is supposed to do. Can you explain this further? Winword and TextPad behave differently. I tried NetBeans and shift+tab is doing nothing.
For 2) Is it the same as
pressing ctrl+f to enter a search string and then continuing with F3 for forward matches and shift+F3 for backward matches? If you select a string before pressing ctrl+f then this string is added to the search list.
If yes, then you can change the key mapping in Tools-->Preferences --> Accelerators to the keyboard combination you are most familiar with (look for "find").
Frank

Forcing link in one web based PDF to open link to another PDF in new browser window

We have created a form using LiveCycle Designer ES2. The form is found on our website and is used by faculty to submit proposal information to our office. Depending upon the answers to questions in the form if they say yes we had a link to another form that we would like them to complete and submit with the original PDF that they are working on. The problem that we are having is that when they click on the form it opens the new PDF and all the data that they had entered in the original PDF is gone once the new form opens up. Is there a way to force the new PDF via the use of some scripting that can go along with the link, or via the use of a button that can force the new form to open in a new browser window? It is impractical for us to expect 1500 faculty members to change their browser settings to open new PDF's in a new window. We have removed the links for now and have just put in text that says if they select yes they need to go out and complete the additional form.
The form we are using can be found here: http://spo.usu.edu/files/uploads/SP-01.pdf
The first three questions on page two where we reference the other forms is where we would like to be able to add the links to the new forms and have them open in a new browser window. When the form is downloaded and opened in Adobe Acrobat/Reader the links functioned correctly, it just did not function properly when it opens in a browser.
Thank you in advance for any assistance you can offer in regards to this issue.

I used a button, removed the border/fill properties and underlined the caption to look like a URL.
The click event is...
// form1.page1.subform1.urlBtn::click - (JavaScript, client)
app.launchURL("http://spo.usu.edu/files/uploads/SP-01.pdf",true);
The PDF will open in a new window or tab, depending upon the browser configuration.
Steve

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

File not found when adding a link to another site collection on the navigation page

When I am adding a link to another site collection in the navigation page, I got the following error. Is there any limitation for the navigation setting? why can't we add a link to another site collection in the navigation page?
This is SharePoint 2007

Hi
the URL provided is working? (check it in separate browser window )
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

I just had to have my toshiba laptop hard drive replaced and I am unable to move my itunes library from my ipad back to the laptop. It says it is linked to another library and I can only transfer purchased music etc and not the rest of the library.Help!

I have just had my Toshiba laptop hard drive replaced. This has resulted in all previous content held on the laptop to be lost. I wanted to try and transfer my music library from my ipad to the laptop, but it will not allow me to do so. The message is that the ipad is linked to another computer and it will only allow the transfer of the items purchased on through the ipad and nothing else. Does anyone know if the full library can be transferred back to the computer?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

How to use ImageControl on another thread out main

Hi All,
I'm looking to use ImageControl (ImageControl.fp) on another thread out main thread
In my second thread i try to update image but i have a error (This panel operation can be performed (if a top-level panel) only in the thread in which the panel was created, or (if a child panel) only in the thread in which the top-level parent panel was created.)
Here my code
Main thread :
ImageControl_ConvertFromDecoration (panelHandle, PANEL_IMAGECTRL, 0);
ImageControl_SetZoomToFit (panelHandle, PANEL_IMAGECTRL, 1);
ImageControl_SetAttribute (panelHandle, PANEL_IMAGECTRL, ATTR_IMAGECTRL_SHOW_SCROLLBARS, 0);
hdleThread = CreateThread(NULL, 0, (LPTHREAD_START_ROUTINE) ThreadTest, NULL, 0, &idThread);
Secand thread :
int ThreadTest (void * data)
ImageControl_SetZoomToFit (panelHandle, PANEL_IMAGECTRL, 1);
iIdError = ImageControl_SetAttribute (panelHandle, PANEL_IMAGECTRL, ATTR_IMAGECTRL_IMAGE, imageToDisplay);
// iIdError = -129
Could you help me ?
Thankyou

many thanks. I should have thought of the need for using the Target Display Mode.
tony

How can I pass an exception from one thread to another thread

If I create a new class, that will extends the class Thread, the methode run() can not be use with the statement Throws Exeption .
The question now: Is there any possibility to pass an exception from one thread to another thread?
Thx.

It really depends on what you want to do with your exception. Is there some sort of global handler that will process the exceptions in some meaningful way? Unless you have that, there's not much point in throwing an exception in a thread, unless you simply want the stack trace generated.
Presuming that you have a global handler that can catch exceptions, nest your Exception subclass inside a RuntimeException:
public class NestedRuntimeException extends RuntimeException
    private final m_nestedException;
    public NestedRuntimeException(final Exception originalException)
        super("An exception occurred with message: " + originalException.getMessage());
        m_nestedException;
    public Exception getNestedException()
        return m_nestedException;
}Your global handler can catch the NestedRuntimeException or be supplied it to process by the thread group.

HT204074 I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even I authorized the machine to my Apple ID, I can not connecto to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed.

I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even I authorized the machine to my Apple ID, I can not connect to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed. I still can not connecto to the Store.
My previous machine has Itunes Installed, and I deauthorized the machine so I unlinked to my Apple ID, if this is correct.
Anyway, Dropbox is also not connecting....so I do not know how to make it woek. please help!

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

If I try and follow a link from another website to open another I get awclick.php (GIF Image 1x1) pixels in a new tab instead of the web page I want.

I was trying to open a website as a link from another website and I get a new tab that says
awclick.php(GIF Image 1x1 pixels)
I can open the website without clicking on a link to it by just typing in the address but as this is a cash back site I am linking from it doesn't help!

You're welcome

When I open a link from another website ForeFox puts a messagge at the top of the new link saying that it has blocked the websiste from transferring me to a new

When I open a link for another website Firefox opens a new tab but puts a line on the top of the new page saying that Firefox has blocked the website from transferring me to another page.
I have to press ALLOW before Firefox will open the new page.
How can I solve this problem.
Many thanks in advance.

hello betth007, in order to get effective help, please open a new question at https://support.mozilla.org/en-US/questions/new instead and include a bit more details about your issue (what kind of error message are you getting, etc.). thank you!

Creating a database link to another schema in the same database

Hello,
I'm trying to create a database link to another schema in the same database. It was created without errors, but when I try to use it I receive "ORA-12154: TNS:could not resolve the connect identifier specified" message...
I'm trying to do it because on my production enviroment the databases are separated, so there I can use database links without problem, but in my development environment it's all in one database separated by schemas...
So I'm trying to simulate the same system to not need to rewrite the query every time I move from development to production environment.
Any ideas?
Thanks

Hi,
Yes, you can create a database link to your own database. I've done it before for exactly the same reason you want to.
(By the way, I think it's a good reason. What are the alternatives?
Having different versions of code for Development and Production? Absolutely not! Terrible idea!
Using synonyms or substitution variables that are set differently in the different databases? That might be more efficient than a database link, but efficiency probably isn't such a big issue in Development.
[Conditional compilation|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/fundamentals.htm#sthref250]? This might be good; it has all the efficienty of the above options, with more clarity.)
Assuming you do want to stick with a database link, not all errors are caught when you create the link.
Is the Development database in the tnsnames.ora file of the Development server? Do you have other database links, either in the Development server or pointing to it, that work? What is different about the ones that work, and the one that doesn't?
Edited by: Frank Kulash on Oct 14, 2009 1:58 PM
The more I think about this, the more I agree with the earlier respondent: synonymns are a good solution for this.
To that suggestion you replied:
On this way I might use "select * from SCHEMA.table" instead of "select * from table@SCHEMA"... I looking for an option to use the second way...Actually, the suggestion was that you say:
select *
from SCHEMA_table_ptr;where schema_table_ptr is a synonym.
In Development, that synonym is defined as schema.table.
In Production, that synonym is defined as table@SCHEMA
Why are you "looking for an option to use the second way"?
If you think that people reading the code should realize that the query is being done via a database link (at least in Production), then add a comment.

Link to another thread.

Similar Messages

Maybe you are looking for