Link to attachment not working in Collaboration Task
Hi All,
We found an issue when we are attaching documents to a Collaboration
Task which is created from a Collaboration Room:
When we link documents that have been already stored in KM everything
works fine. However when we use the direct upload at Task generation
the links are not always accessible.
We found out that the URLs which are generated behind the links differ
in one slash.
We are on EP 7 SP 14.
Thanks & Regards,
TC
Have you tried %20%20 in the code rather than spaces?
Just a guess.
See if that works in RoboHelp's viewer.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
On a fresh restart my Itunes plays properly. At some point tunes are interrupted by skips which seems to be linked to my computer working on another task. It either clears up on it's own or I have to re-start. Anybody else experience this?
venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display -
After installing firefox 27 "save link as" is not working
after installing firefox 27 "save link as" is not working started a few days ago use to work fine before v27 was installed. please help.
Hello hansram, '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
D-Link dub e100 not work in mac 10.10
hi , i just upgraded my macbook pro to mac 10.10 and after upgrade my USB-to-ethernet device (D-link dub e100) not work and in setting says me self assigned ip
please help.Thanks for the suggestion.
I have found that clicking on the photo works on export, but not all of the time.
I tried redefining a keyboard shortcut. That does not work since the "Menu: View/Zoom In" function does not work either.
Strange that it is only a problem with multiple photos open and they appear in tabs. I have tried deselecting "Open new documents as tabs" under preferences. That 'fixes' the problem since the zoom in / out does not work only with multiple tabs open, but it works with multiple windows open. I suspect that this 'fix' will work on the export problem too, since I will be exporting the active window.
So essentially, the 'open new documents as tabs' is so buggy that it should not be used.
Hopefully Adobe will not try to charge me for an upgrade to CS5 in order to fix this problem. -
Link functions are not working correctly
I am have a number of links on my page and I am using the a;link, a:hover and a:visited commands but I am getting strange results. First of all my css is on a separate style sheet. What I am trying to do is have all my links in gray text both when before and after being visited and I want the text to change to red and underline when I hover over the link. My results are that in live view the links all seem to work ok except for my HOME link at the bottom of the page where it does not change color and does not underline. When I view in browser the results are worse. None of the links change when I hover over them excepts for the DOWNLOAD link. Also note that I have 4 columns of unordered lists about the footer which also does not work either. Here is the source and css code. Thanks for your help.
Dan
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="description" content="HOME PAGE for company which provides chemical process equipment, diaphragm pumps, plastic tanks, pH/ORP controls, mixers, filtration equipment, flowmeters"
<title>Chemtech Process Equipment</title>
<style type="text/css">
</style>
<link href="CSS/Chemtech.css" rel="stylesheet" type="text/css" />
<link rel="stylesheet" href="CSS/verticalmenu.css" type="text/css" />
<link rel="stylesheet" href="CSS/horizontalmenu.css" type="text/css" />
</head>
<body>
<div id="container">
<div id="header"><img src="Images/header.jpg" alt="header" width="960" height="310" border="0" usemap="#logomap" />
<map name="logomap" id="logomap">
<area shape="rect" coords="3,5,265,123" href="index.html" alt="Chemtech Process Equipment" />
</map>
</div>
<div id="navigation_bar"><div class="AJXMenuULDYZCC"><!-- AJXFILE:CSS/horizontalmenu.css -->
<div class="ajxmw1">
<div class="ajxmw2">
<ul>
<li><a href="index.html" title="Home"><b> HOME </b></a></li>
<li><a class="ajxsub" href="productsbytype.html" title="Products"><b> PRODUCTS </b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="productsbytype.html" title="Indexed by Type"><b>Indexed by Type</b></a></li>
<li><a href="productsbymfgr.html" title="Indexed by Manufacturer"><b>Indexed by Manufacturer</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Request Quote"><b>REQUEST QUOTE</b></a></li>
<li><a href="#"><b>DOWNLOADS</b></a></li>
<li><a href="contact%20us.html" title="Contact Us"><b> CONTACT US </b></a></li>
</ul>
</div>
</div>
<br />
</div></div>
<div id="sidebar"><div class="AJXMenuEHWBGHC"><!-- AJXFILE:CSS/verticalmenu.css -->
<ul>
<li><h1><b>PROCESS EQUIPMENT</b></h1></li>
<li><a class="ajxsub" href="#" title="Pumps"><b>Pumps</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Air Diaphragm"><b>Air Diaphragm</b></a></li>
<li><a href="#" title="Centrifugal"><b>Centrifugal</b></a></li>
<li><a href="#" title="Drum"><b>Drum</b></a></li>
<li><a href="#" title="Gear"><b>Gear</b></a></li>
<li><a href="#" title="Hose"><b>Hose</b></a></li>
<li><a href="#" title="Magnetic Drive"><b>Magnetic Drive</b></a></li>
<li><a href="#" title="Metering"><b>Metering</b></a></li>
<li><a href="#" title="Peristaltic"><b>Peristaltic</b></a></li>
<li><a href="#" title="Piston"><b>Piston</b></a></li>
<li><a href="#" title="Vertical"><b>Vertical</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Mixers"><b>Mixers</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Direct Drive"><b>Direct Drive</b></a></li>
<li><a href="#" title="Gear Drive"><b>Gear Drive</b></a></li>
<li><a href="#" title="C-Clamp Mount"><b>C-Clamp Mount</b></a></li>
<li><a href="#" title="Drum Mount"><b>Drum Mount</b></a></li>
<li><a href="#" title="Fixed Top Mount"><b>Fixed Top Mount</b></a></li>
<li><a href="#" title="Side Mount"><b>Side Mount</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Filters"><b>Filters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Bag"><b>Bag</b></a></li>
<li><a href="#" title="Cartridge"><b>Cartridge</b></a></li>
<li><a href="#" title="Centrifuge"><b>Centrifuge</b></a></li>
<li><a class="ajxsub" href="#" title="Indexing Media"><b>Indexing Media</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Gravity FIlter"><b>Gravity Filter</b></a></li>
<li><a href="#" title="Vacuum FIlter"><b>Vacuum FIlter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge FIlter</b></a></li>
<li><a href="#" title="Pressure Filter"><b>Pressure Filter</b></a></li>
<li><a href="#" title="Sludge Filter"><b>Sludge Filter</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Oil Skimmers"><b>Oil Skimmers</b></a></li>
<li><a href="#" title="Oil-Water Separators"><b>Oil-Water Separators</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Tanks"><b>Tanks</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Carboys & Totes"><b>Carboys & Totes</b></a></li>
<li><a href="#" title="Rectangular"><b>Rectangular </b></a></li>
<li><a href="#" title="Cylindrical Cone Bottom"><b>Cylindrical Cone Bottom</b></a></li>
<li><a href="#" title="Cylindrical Flat Bottom"><b>Cylindrical Flat Bottom</b></a></li>
<li><a href="#" title="Vertical Bulk Storage"><b>Vertical Bulk Storage</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Piping/Hose"><b>Piping / Hose</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="PVC Pipe & Fittings"><b>PVC Pipe & Fittings</b></a></li>
<li><a href="#" title="CPVC Pipe & Fittings"><b>CPVC Pipe & Fittings</b></a></li>
<li><a href="#" title="Polypro Pipe & Fittings"><b>Polypro Pipe & Fittings</b></a></li>
<li><a href="#" title="PE Pipe & Fittings"><b>PE Pipe & Fittings</b></a></li>
<li><a href="#" title="Kynar Pipe & Fittings"><b>Kynar Pipe & Fittings</b></a></li>
<li><a href="#" title="Sanitary Hose, Gaskets & Fittings"><b>Sanitary Hose, Gaskets & Fittings</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Immersion Heaters"><b>Immersion Heaters</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Electric Immersion"><b>Electric Immersion</b></a></li>
<li><a href="#" title="Steam Coil"><b>Steam Coil</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a class="ajxsub" href="#" title="Process Controls"><b>Process Controls</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="pH & ORP Probes"><b>pH & ORP Probes</b></a></li>
<li><a href="#" title="Conductivity Probes"><b>Conductivity Probes</b></a></li>
<li><a href="#" title="Flowmeters"><b>Flowmeters</b></a></li>
<li><a href="#" title="Level Sensors"><b>Level Sensors</b></a></li>
<li><a href="#" title="Pressure Transducers"><b>Pressure Transducers</b></a></li>
<li><a href="#" title="Process Controllers"><b>Process Controllers</b></a></li>
<li><a href="#" title="VFD's"><b>VFD's</b></a></li>
<li><a href="#" title="Power Monitors"><b>Power Monitors</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><h1><b>ENGINEERED SYSTEMS</b></h1></li>
<li><a href="#" title="Chemical Feed Skids"><b>Chemical Feed Skids</b></a></li>
<li><a class="ajxsub" href="#" title="Evaporators"><b>Evaporators</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Filtration Systems"><b>Filtration Systems</b></a></li>
<li><a href="#" title="Fume Scrubbers"><b>Fume Scrubbers</b></a></li>
<li><a href="#" title="pH Neutralization"><b>pH Neutralization</b></a></li>
<li><a href="#" title="RODI Water Systems"><b>RODI Water Systerms</b></a></li>
<li><a href="#" title="Transfer Sumps"><b>Transfer Sumps</b></a></li>
<li><a href="#" title="UL Control Panels"><b>UL Control Panels</b></a></li>
<li><a href="#" title="Vacuum Distillation"><b>Vacuum Distillation</b></a></li>
<li><a class="ajxsub" href="#" title="Wastewater Treatment"><b>Wastewater Treatment</b>
<!--[if gt IE 6]><![endif] --></a><!--<![endif]--><!--[if lte IE 6]><table><tr><td><![endif]-->
<ul>
<li><a href="#" title="Burt Process Equipment"><b>Burt Process Equipment</b></a></li>
<li><a href="#" title="Filtertech"><b>Filtertech</b></a></li>
</ul>
<!--[if lte IE 6]></td></tr></table></a><![endif]-->
</li>
<li><a href="#" title="Water Reclaim (LEEDS)"><b>Water Reclaim (LEEDS)</b></a></li>
</ul>
<br />
</div>
</div>
<h1>Engineered Solutions to your fluid handing requirements.<img src="Images/aro-pump-ad.jpg" alt="aro pump ad" width="200" height="200" hspace="10" vspace="15" align="right" /></h1>
<p>Chemtech Process Equipment (CPE) provides fluid handling equipment to a wide range of industries which include pharmaceutical, biotechnology, microelectronics, metal finishing, chemical processing and general manufacturing.</p>
<p>CPE offers turnkey engineered products such as transfer sumps, wastewater treatment, coolant filration, oil-water separation, water reclamation (LEEDS), pH neutralization, deionized water (RODI), and custom fabricated tanks and vessels.</p>
<p>CPE’s product line includes pumps, tanks, mixers, filters, evaporators, magnetic separators, centrifuges, oil skimmers, flowmeters, level, pH, ORP, and conductivity measurement, heaters, plastic pipe, valves and fittings, sanitary hose, and gaskets to name a few. Feel free to review our product line and contact us if you have any questions or applications to discuss.</p>
<h2>Products<br /></h2>
<hr align="left" width="740" />
<br />
<div class="floatlist">
<ul>
<li><a href="">Air Diaphragm Pumps</a></li>
<li><a href="">Cenrifugal Pumps</a></li>
<li><a href="">Drum Pumps</a></li>
<li><a href="">Gear Pumps</a></li>
<li><a href="">Hose Pumps</a></li>
<li><a href="">Magnetic Drive Pumps</a></li>
<li><a href="">Metering Pumps</a></li>
<li><a href="">Multi-Stage Centrifugal Pumps</a></li>
<li><a href="">Peristaltic Pumps</a></li>
<li><a href="">Piston Pumps</a></li>
<li><a href="">Submersible Pumps</a></li>
<li><a href="">Vertical Immersion Pumps</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Custom Engineered Tanks</a></li>
<li><a href="">Molded Plastic Tanks</a></li>
<li><a href="">Direct Drive Mixers</a></li>
<li><a href="">Gear Drive Mixers</a></li>
<li><a href="">Portable Mixers</a></li>
<li><a href="">Side Mount Mixers</a></li>
<li><a href="">Conductivity Probes</a></li>
<li><a href="">Flowmeters</a></li>
<li><a href="">Level Sensors</a></li>
<li><a href="">pH & ORP Probes</a></li>
<li><a href="">Power Monitors</a></li>
<li><a href="">Pressure Transducers</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Process Controllers</a></li>
<li><a href="">Ultrasonic Level Transmitters</a></li>
<li><a href="">Variable Frequency Drives</a></li>
<li><a href="">Sanitary Hose, Gaskets & Fittings</a></li>
<li><a href="">PVC Pipe, Valves & Fittings</a></li>
<li><a href="">CPVC Pipe, Valves & Fittings</a></li>
<li><a href="">Polypro Pipe, Valves & Fittings</a></li>
<li><a href="">Polyethylene High Purity Piping</a></li>
<li><a href="">Immersion Heaters</a></li>
<li><a href="">Magnetic Separators</a></li>
<li><a href="">Centrifuges</a></li>
<li><a href="">Evaporators</a></li>
</ul>
</div>
<div class="floatlist">
<ul>
<li><a href="">Bag Filters</a></li>
<li><a href="">Cartridge Filters</a></li>
<li><a href="">Indexing Media Filters</a></li>
<li><a href="">Gravity Filters</a></li>
<li><a href="">Pressure Filters</a></li>
<li><a href="">Sludge Filters</a></li>
<li><a href="">Vacuum Filters</a></li>
<li><a href="">Filter Bags</a></li>
<li><a href="">Filters Cartridges</a></li>
<li><a href="">Filter Media</a></li>
<li><a href="">Pulsation Dampeners</a></li>
<li><a href="">Fiberglass Grating</a></li>
</ul>
</div>
<div id="footer">
<ul>
<li><a href="index.html">HOME</a></li>
<li><a href="productsbytype.html">PRODUCTS</a></li>
<li><a href="requestquote.html">REQUEST QUOTE</a></li>
<li><a href="downloads.html">DOWNLOADS</a></li>
<li><a href="contact us.html">CONTACT US</a></li>
</ul>
<hr align="center" width="940" id="footer rule2" />
<h4>© 2011 Chemtech Process Equipment, All Rights Reserved, Designed and Developed By Graphics Advantage. <img src="Images/GA-logo.jpg" width="46" height="40" align="top" /><br /><br /></h4>
</div>
</div>
</body>
</html>
@charset "utf-8";
body {
background-image: url(../Images/logo-background.jpg);
background-repeat: repeat;
background-attachment: fixed;
#container {
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
color: #000;
background-color: #FFF;
width: 960px;
margin-right: auto;
margin-left: auto;
overflow: hidden;
background-attachment: fixed;
#container p {
padding-right: 20px;
#header {
width: 960px;
height: 310px;
#headernarrow {
height: 150px;
width: 960px;
#navigation_bar {
height: 31px;
width: 960px;
#sidebar {
float: left;
width: auto;
margin-right: 20px;
#footer {
text-align: center;
width: 960px;
float: left;
#footer ul li {
display: inline;
#footer ul li a {
padding-right: 10px;
padding-left: 10px;
a:link {
color:#666;
text-decoration:none;
a:hover {
color:#F00;
text-decoration:underline;
a:visited {
color:#666;
text-decoration:none;
.floatlist {
font-family: Arial, Helvetica, sans-serif;
font-size: 10px;
color: #F00;
float: left;
height: auto;
width: 190px;
.floatproductlist {
font-family: Arial, Helvetica, sans-serif;
float: left;
height: auto;
font-size: 14px;
font-style: normal;
color: #000;
width: 380px;
h4 {
font-size: 10px;
font-family: Arial, Helvetica, sans-serif;
h1 {
font-family: Arial, Helvetica, sans-serif;
font-size: 24px;
font-weight: bold;
color: #F00;
ul {
list-style-type: none;
padding: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 1em;
display: block;
.largeheading {
font-family: Arial, Helvetica, sans-serif;
font-size: 48px;
color: #F00;
.floatimageleft {
float: left;
width: 250px;
margin-right: 20px;
height: auto;
margin-top: 10px;
background-image: url(../Images/aro-compact-series-float.jpg);
background-repeat: no-repeat;
margin-bottom: 20px;When you use the link pseudclass in your css it has to be expressed in the correct order.
LoVe HAte
Link
Visited
Hover
Active
It doesn't matter that you have not expressed all four but the three that you have still need to be that way.
Anyway, try it, we have nothing to lose!
Martin -
Extended Notification not working for Dialog Task with agent assignment
Hi Friends,
I have an issue where I have a user decision step and a sub workflow contains a dialog task with agent assignment.
Extended notification is configured properly and is working properly for user decision step but its not working for the dialog task created as an activity.
Batch jobs are configured to run report SWN_SELSEN.
I was checking SDN and found this discussion handy :
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4f/3bed495cc018c8e10000000a42189e/content.htm
One thing that wonders me is that notifications show up in SOST 4-5 seconds before the user decision step starts execution.
See screenshot from SOST and WF log.
SOST log :
2 questions here: Why is notification not being sent for Dialog task?
Why is user decision notification being sent that early even before the User decision task starts execution?
Please provide your valuable inputs.
Regards,
SandipAn activity step with agents is supported by the extended notifications if it is a decision task or not, I have used it many times and it works well just no approval/rejection links if it's not a decision task.
From your screenshot you can see that a mail has been created and is found in SOST, usually this cases are problems with the mail server or connection to it, check the mail settings in the SMTP node in transaction SCOT, also check with mail server team if there is a block to/from the SAP server. -
Document Approval - Link in Email not working
Hi
I am using the approval function for KM documents.
When a content item is changed, and submitted for approval, the approver gets an email.
In that email there is two links, one to the content item itself and one to the details of the content item.
The one to the details of the document does not work!
The host name seems to be missing in the url.
The one to the content item itself works fine.
I do have set up the hostname in:
System Administration->System Configuration->KM->CM->Global Services->Url Generator Service.
that points to the content item.A colleague of mine recommends looking here:
Ya, it is unsder systemadmin > sys config > KM > config > CM > Global Services > URL Generator Service.
There is a value for "host" and there which should be "http://(orhttps://)portalserver:servport
Regards,
Craig -
Ringtone link in media not working
When I go into Media then into ringtones and open up my menu I have an option for Download Ring Tone. When I click on the link I get this error.
HTTP Error 500: Internal Server Error
An unexpected condition was encountered which prevented your request from being fulfilled. This could be cause by a problem with teh gateway, a problem with destination server or a problem with the page itself. Please try loading a different page. Contact your service provider if this problem persists
I then have the option to select ok or go to details. If I go to details it brings me to a page saying
Error Accessing the html page
Error Details
- HTTP Error Code:500
-Error
Message:java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 This error has been logged with the server,please try again later.
I have tested that link with 2 8330 and 1 8130. I have been able to get the page to display twice but with no actual reason for it to work. One time I hit refresh and it loaded correctly and another time I hit back accedentally and it loaded to the ringtone page(on the 8130). I bookmarked the page when it did showed properly when I hit the back button. The bookmark will load perfectly everytime. But going through that above link does not work and I have tried it no less then 30 times.
I sent the bookmark to another BB via pin and it was not able to load the page. When I go to copy the page source both from the error and the bookmark that loads this is the link I get.
http://mobile.blackberry.com/MBC/homepage?book=ringtone_catalog&legal=ringtone_catalog_eula
All 3 phones are on Telus Mobility running 4.3. The curves both have default browser settings on them and can connect to other sites no problem, the pearl had default settings when I got it to work and book marked it and since then I have changed some of the internet settings. I enabled java and switched emulation to blackberry instead of openwave(wap). That did not make any difference to the link in media but bookmark loads fine still. Internet browser is the default for all devices.
Hope this is enough info. I want to know if any other Telus clients have the issue or if any other carriers are having the same problem as well.
Thanks for any help and suggestionsMobilekid, did you figure out your solution?
Nurse-Berry
Follow NurseBerry08 on Twitter -
Href links in slideshow not working
hi,
I have created a non-flash slideshow with WOW Slider which I find to be a very good program and is jquery based.
the actual slideshow runs fine on iPad, my PC - and Android devices,
but:
the six slides have links embedded to other websites, that I have set up to run in a new window, and work fine on PC & Andoid
but on the iPad the outbound links do not work - yet an href link will work on the iPad if called from a static image.
I'm at my wits end with this, and any help would be really appreciated.
thanks,
Kevin UK
nb: the problem page is: http://www.kevbro.co.uk/slides.htm
the wow slider code is:
<!-- Start WOWSlider.com BODY section --> <!-- add to the <body> of your page -->
<div id="wowslider-container1">
<div class="ws_images">
<ul>
<li><a href="http://www.farnworthsom.co.uk/" target="_blank"><img src="data1/images/010.jpg" alt="my latest work" title="my latest work" id="wows1_0"/></a>Driving Instructor training, help with the ADI Standards Check etc</li>
<li><a href="http://www.kevbro.co.uk/chris/index.htm" target="_blank"><img src="data1/images/007.jpg" alt="small business site" title="small business site" id="wows1_1"/></a>Hanging Baskets and Landscaping </li>
<li><a href="http://www.kevbro.co.uk/magellanfoods/index.html" target="_blank"><img src="data1/images/009.jpg" alt="local Food Company" title="local Food Company" id="wows1_2"/></a>a large site with an online ordering system</li>
<li><a href="http://www.carols-pastels.co.uk" target="_blank"><img src="data1/images/001.jpg" alt="Carol's pastels" title="Carol's pastels" id="wows1_3"/></a>the lovely artwork of my talented wife </li>
<li><a href="http://www.carols-pastels.co.uk/books/" target="_blank"><img src="data1/images/002.jpg" alt="Carol's first book" title="Carol's first book" id="wows1_4"/></a>a charming fantasy tale for children. </li>
<li><a href="http://www.kevbro.co.uk/canyon/index.htm" target="_blank"><img src="data1/images/005.jpg" alt="Grand Canyon" title="Grand Canyon" id="wows1_5"/></a>my tribute to 9 brave men in replica boats</li>
</ul>
</div>
<div class="ws_bullets"> <div>
<a href="#" title="my latest work">1</a>
<a href="#" title="small business site">2</a>
<a href="#" title="local Food Company">3</a>
<a href="#" title="Carol's pastels">4</a>
<a href="#" title="Carol's first book">5</a>
<a href="#" title="Grand Canyon">6</a>
</div>
</div>
<span class="wsl"><a href="http://wowslider.com/vu">image carousel</a> by WOWSlider.com v7.3</span>
<div class="ws_shadow"></div>
</div>
<script type="text/javascript" src="engine1/wowslider.js"></script>
<script type="text/javascript" src="engine1/script.js"></script>
<!-- End WOWSlider.com BODY section -->I have tried many of them Frank ...
jquery ones like Wowslider, Virtual lightbox, Juicebox, Nivo slider, and css based one's like CSS slider et al.
and believe me when I say that I have found none of them to be totally reliable across all the varied devices.
whilst what I have resorted to is quite basic, it gets the job done - particularly given my age and what I am hoping to achieve with my site.
as a kind of thank you to Michael and yourself, there are links below to two small pages I did ages ago that may give you a bit of a chuckle.
they are not mentioned on my site, and I'm not sure if they work on iPads.
http://www.kevbro.co.uk/galway/bay.htm
http://www.carols-pastels.co.uk/Nigerianphone/phone.htm
all the best,
Kevin -
Why do the regular links in template not work on announcement pages?
I am trying to figure out why the regular links (buttons) on top in my template does not work on the announcement pages on my business catalyst website. The links work perfectly fine on the other pages, but when you click on one of the latest news links to the right to read it, it leads you to a page with a url-prefix called announcements, and when you try to get back to one of the other pages by clicking on the buttons at the top for example the register button, it takes you to: http://www.littlefolkies.com/announcements/register instead of http://www.littlefolkies.com/register, and so it gives you a error message: page not found...???
Is there anyone who can help me out? I don't understand why this is happening.
You can try it yourself at www.littlefolkies.com...
I greatly appreciate any guidance!
Thanks so much,
ITake a look at your classes link.
You can see how you have the / in front and the others do not. This is why.
This tells BC to read from the site root. Without it when your inside sub folders (other levels in your url) then it will link to only within that level without the / at the front.
It is the same reason why you do all your templates and css etc with the / in front which I mentioned to you before if I recall.
You can also change the name /announcements in the url in the settings for it if you want to. -
Webi report part(include Opendoc Link) ondesktop did not work in BI Widgets
My customer followed <BI Widgets User Guide>(XI3.1) to create a webi report part(include Opendoc Link) onto desktop.
Page 26:
To convert Report Part into a Widget ,drag and drop the Report Part from the Web Intelligence Viewer onto the desktop.
As a widget, the Report Part will include the following BI Widgets features:
- Automatic refresh
- User controlled size and positioning
- Saved display and data context state
- Optional setting as the top application window
- Full XI R3 security
- Web Intelligence opendoc links to detailed reports.
But it can not be clicked(hyperlink did not work).
My customer follow the SAP Note 1244968 to create again, it still can not be clicked.
For I can't reproduce this issue, could you tell me what's it probably related to?
SAP Note 1244968:
Symptom
Trying to use Hyperlinks in a BI Widget created from a WebIntelligence
report
Environment
XIR3
Workflow
1. Login in Webintelligence
2. Create on efashion a Webintelligence report with the
objects:Year,Sales Revenue
3. In the Edit panel add a column to the table and insert the
variable :=If([State]="DC"; HTMLEncode("http://uk.yahoo.com"); "")
4. In the Properties Display/Display/Read cell content as Hyperlink
5. Run the report and save it
6. Open the Webintelligence report with HTML view and click on the
hyperlink you are redirected to the Yahoo website
7. Log in BI Widget
8. Right click on the right inside icon of BI Widget and click on
Document List Explorer
9. Find the Webintelligence report and double click on it
10. Click on the table and drag and drop it to your desktop
11. The BI Widget gets created
12. Click on the column containing the Hyperlink:nothing happens.
Cause
There is no functionality of using Hyperlinks in a BI Widget created
from a Webintelligence report
Resolution
Enhancement Request ADAPT01119581 has been created
Environment details:
Srerver Environment: OS Version: RedHatEnterpriseLinuxES4.0 update5
Client Environment: OS Version: WindowsXP
Browser: IE6
JRE Version: 1.6.003_
Web & Application Server: Tomcat 5.5.20
Database character: AL32UTF8, JA16SJIS
Connection: native, ODBC, OLEDB
NLS LANG: Japanese Japan.JA16SJISHi Soniya,
These are the steps:
1. Log in into infoview
2. Change the preferences (Click in the Preference button in the main tool bar), in the WebIntelligence section change the Select a default view format: to Interactive.
3. Click OK
4. Open the report where you want to add the hyperlink
5. Right click in the column or cell to add the hyperlink
6. Click Hypelink > New
7. You will see the Create Hypelink window, click Browse the select which report do you want to link
8. Fill in the parameter, prompts, etc.
and that's it, hope it's clear now. If you have any question let me know. -
TCS2 - Cross References between linked Frame files not working
Hi,
All the cross-references in my linked in FrameMaker 9 files work when output in PDF, however, when outputting WebHelp from RoboHelp 8, FrameMaker cross references that reference another FrameMaker file (i.e. not Current) do not work. The format is correct, they appear blue and underlined like every other link/cross-reference, but when moused over in the browser, there's no link to click. The HTML created by RoboHelp does not point to a file. For example, here's the HTML for one link not working as shown from within RoboHelp:
<p class="FM_Bulleted"><span style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span>•<span
style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span><a><span
class="FM_Link">Create Supported App from
Install</span></a><span class="FM_Bold">.</span>
RoboHelp appears to partially convert the link as <span class="FM_Link"> appears in the HTML but I think there should be more information in the <a> definition, such as in the HTML created for a link that references a topic created from the same FrameMaker file.
<p class="FM_Bulleted"><span style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span>•<span
style="font-family: 'Times New Roman'; font-size: 7.0pt;">   </span><a
href="#XREF_17096_Creating_an">Creating an App</a></p>
I've ensured all the cross-references in each framemaker file in the book have the same format and are mapped to <$paratext> in the project settings. I've also tried importing the FrameMaker book instead of linking it and the same problem persists.
Any ideas on how to make RoboHelp create the link correctly? Any help you can offer would be greatly appreciated.
Thank you,
Jacquie FinneyMost of the major cross reference issues have been resolved in TCS 2 with further improvements in TCS 3.
Please ensure that you have all the patches of TCS 2 installed on your system.
If the issue is still there, there could be an altogether different reason for cross reference not working or the issue might have been fixed in TCS 3.
The reason or workaround can be analysed once the sample files with the issues are provided.
It will be great if you could share a small sample FM document containing the cross reference and target having the issue. If the cross reference is across documents, then a FrameMaker book along with its FM files can be shared in a zip format.
You can mail the documents to me at magrawalATadobeDOTcom
Mayank -
There is a toolbar feature in the lower right corner of the taskbar. I tried to set up the Links toolbar. I can drag addresses to this, but when I click them, nothing happens. What should happen is the site/page whose address I clicked should open.
How can I fix this? Is it a problem with the Firefox I'm currently using?I checked out the links you provided. One is dead, one is for Windows 7, which doesn't apply to my problem because I'm using Windows 8, and I've been checking out the third.
I'm a novice and may not have the right vocabulary to explain myself. The Links toolbar is accessed from the bottom right side of the taskbar at the bottom of the screen. Apparently Firefox is necessary to use this, as everyone I've talked to swears it's not visible for IE.
What I'm referring to is Right-click "show hidden icons." Scroll up to Toolbars. Scroll over to Links. Check it to enable it. Then what should happen is I should be able to drag the address/url from the top of the page to this menu and click on it when I want to go back to that particular page. That is what is not working. Nothing happens when I click the addresses in the Links menu. -
AcrobatActiveXVB SDK Sample - Links in PDF Not working
Hi,
I am trying to create an application in VS.net (similar to AcrobatActiveXVB SDK Sample) to display PDF files in my application. PDF file opens fine. But external links in PDF file are not working. I trying to display a main index pdf file, which contains external links to 10 other PDF files. All 10 PDF files are located in my local hard drive (main index pdf file is also located in the same folder). If I open the main index file in Acrobat Reader then it the links are working fine. It is not working only when it is opened inside the AcrobatActiveXVB SDK Sample. Please help.
Please Note: Links are not grayed. I get the hand mouse pointer, when I mouse over to the links.
Windows OS - XP SP3
Acrobat Reader - Tried it with 9.1.3 & 9.3.3. Un-installed and re-installed multiple times
Thanks in advance.
Rajaramhello, the pdf viewer is still somewhat experimental and under very active development - you could try if the same error is occurring in the current development version, which you can download as an addon from http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi
in case it has the the same rendering problems, you could then file a bug report at https://github.com/mozilla/pdf.js/issues (a github account is necessary for it though) - please also provide a sample document where the error is apparent! -
Link to URL not working in RH X5
Good morning,
A client asked me to include a hyperlink to an internal site of theirs. After I gave them the WebHelp, they said the link doesn't work (I can't test it here as I work offsite without access to their intranet). They said there is a space missing which would account for it not working. The problem is I copied and pasted the URL into the project from the client's email. Here is the URL copied from the client's email to me - you can see the 2 spaces between ACH and Forms. :
http://sharepoint.myfirstnet.com/TreasuryManagement/ACH%20%20Forms/Product%20Information/T raining/ACH_SEC%20Explained.doc
When I right-click on the link in my topic and check the link properties and when I look at the code on the True Code tab, I can see the 2 spaces (not the code for the spaces, of course, but you can tell there is an extra space) so assumed all was well. Yet on the client's end there is only a single space. And if I copy the link from the True Code tab in RH and past it here, for example, or into an email, it comes out like this:
http://sharepoint.myfirstnet.com/TreasuryManagement/ACH Forms/Product Information/Training/ACH_SEC Explained.doc
The double space has been replaced with a single space. I can't explain how or why that would be changed after I put in the hyperlink. Is there something about HTML or RH in particular that doesn't allow double spaces so removes one?
Thanks for any help.
DianeHave you tried %20%20 in the code rather than spaces?
Just a guess.
See if that works in RoboHelp's viewer.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Maybe you are looking for
-
Query leaving action to make wage type amount zero
000010 D OUTWPMASSN 000020 H6 000030 N ADDWT * 000040 Y AMT=1085 RTE=0 MULTI ARAADDWT * I am querying my action type H6 and H7 leaving action in PCR ZCC. PIT ZCCC NOAB. When i am running payroll it is givin
-
How to install a DB Instance in a SQL Server 2005 cluster
Hi all, I have an installation scenaro is install SCS/CI in machine A, and DB instance on a already exist cluster. This is based on Windows 2003 SR2 and SQL Server 2005 cluster. But now after i finish SCS, i don't know how to install the DB instance.
-
Event ID's 4005, 50 and 56 on Server 2008 R2 RDS
My event log's are being hammered with Event 4005 The Windows logon process has unexpectedly terminated, Event 50 The Terminal Server security layer detected an error in the protocol stream and has disconnected the client and Event 56 The RDP protoc
-
How does one manually completely remove PSE 12?
I am having constant issues with PSE 12 crashing and support is absolutely worthless and non responsive. I want to manually completely remove PSE 12 in order to attemp to re-install it. Where can I find the complete steps to manually remove PSE 12?
-
Firefox remains minimized on taskbar and won't open or maximize
Solution found: I solved the issue of "Firefox remains minimized on taskbar and won't open or maximize" and tried to post a reply but it said the thread is closed.I press alt tab until the firefox minimized icon on the task bar is highlighted and the