Link to audio clip showing my GB crackle probs. Please listen/help.

hi all,
this is an ongoing prob and I wanted people to listen to the crackle Im getting in nearly all of my GB songs.
Fast forward the song to 4.00 and you will hear it and then again at around 4.20.
It is random and no matter how many fx or tracks I delete or mixes I try in various ways I cannot eliminate this noise. It seems to be at the end of songs mostly but not always and is usually when most tracks have stopped and just a few are runnning which is odd.
Someone gave me a theory that having the same soft synth (Ie- Alchemy or Podolski) on multiple tracks in the same song could be the reason but why would anyone buy these great products if you couldnt use them as much as you wanted in a song?
I am now out of ideas and am literally sat with a 17 track album that no one can hear. Any advice, tips welcomed.
Does anyone recognize this sound? Have you suffered with it and how did you kill it?
Many thanks
Paul
https://soundcloud.com/porlemery/dreaming-test

hi, yes there are 3 real Instrument tracks
1- drum sample sourced from a track via my itunes library- this track has fx such as echoe and Zebrify added to it
2-second drum as above- this track has Reaktor Aerobics Fx added
3 my vocal recorded with condenser mic into maudio fast track interface into imac- this track has an FX from Guitar rig on my vocal
all other tracks are software
thanks Paul

Similar Messages

How do you link two audio clips to one video clip?

Hi guys,
I want to think multiple audio clips to one video clip and aint know how to do it! I found this page on Adobe knowledge base:-
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS1c9bc5c2e465a58a91cf0b 1038518aef7-7f40.html
It says you can do it but I don't think it explains how? Can anyone provide me with the simple steps required to link two audio clips to one video clip? Many thanks.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

How to link multiple audio clip to one video?

I have multiple audio clips in the timeline but I can't link them all to a video in the timeline.
The "Clip" -> "Link" option is only enabled if I select a single audio clip.
Video:
http://www.bartelsmedia.com/vid/tmp_premiere_question4.swf
Could anybody help, please?

See
Group clips in the Premiere Pro Help.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Audio clips show up as zero seconds (0s) when dragged to project library

I can successfully drag music from my iTunes library into the project library window, but they show up as 0s (zero second) clips no matter what the actual size. Then when I view that music in Clip Trimmer, the entire length of music shows up. Unfortunately, once I close Clip Trimmer, the clip appears to be 0s again.
This same problem shows up with any audio file, including the sound effects included with iMovie.
How can I get my audio clips or music to show up in its full length?
My version is 8.0.6 on Snow Leopard.
Thanks!

This is happening to me too. It's driving me up the wall!

Paste attributes prompt box (only 1st linked video & audio clip)

what is up with that box? how can I avoid this? I need to paste attributes to all 4 audio tracks and not just the 1st one!
The box reads:
Paste Attributes will only use the first video and first linked audio clip for parameters and content to be pasted. Do you wish to continue?

You'll get that warning if you copied more than one clip. The message is telling you that it will only paste the attributes of the first clip of the group you selected.
To avoid that warning, you should only copy ONE clip. After you've copied one clip you can then past the attributes of that clip to as many clips as you select.
-DH

Linked video audio clip goes out of sync when put in timeline - why?

Learning to use Final Cut Express. Clip plays in browser with audio in time with video but as soon as clip is dragged onto timeline the audio goes out of sync. Why? Please can anyone help because its driving me mad!

You don't give any details as to FCE's settings, camera format or your workflow so I can only hazard a guess.
One of the main reasons that audio goes out of sync is because the Easy Setup audio settings do not match the camera's audio settings.
The default setting is for 16bit (48KHz) but your camera may be shooting 12bit (32KHz audio).
If this is the case you need to recapture using the 32KHz Easy Setup.

Only part of some clips show up in Viewer. Please Help!

Hello FCE4 Experts:
I'm soooo baffled! I've been using FCE4 for three years and haven't had a problem. All of a sudden, a biggy! When I drag a clip into the Viewer window and play it, only a part of the clip has anything on it (the rest is black and silent). For example, a clip might be 25 seconds, but for the first 10 secs, I get just black, and for the last, say, 4 secs I get black. This has never happened before, ever! Anyone have any ideas?
The ONLY thing I've done different lately is that I recently purchased a second external hard drive and have been switching between them for different projects. Could this cause a weird problem like this, or is it due to something else?
Thanks very much for any advice!
Vic

UPDATE!
I've checked it out further, and here's what I've discovered:
When I ingested segments of my clips (not directly from my camera, but rather from a DVD back-up disk... which is what I did in this case), it seems that the segments do get ingested in a useable form, but along with each segment comes long periods of black/silent video. Weird!
So, my guess it that, when I'm ingesting only short segments of my clips, I'll need to do it directly from my camera.
FYI: I can ingest the FULL clips (from the DVDs), no problem. It's when I ingest segments of the clips (from the DVDs) that I get weird stuff going on. [And, ingesting from the camera works fine whether I ingest a full or partial clip. It's only when ingesting from back-up DVDs that I have any problems.]
Anyways, that's what seems to be going on. If anyone has any thoughts, I'd love to hear 'em!
Thanks!
Vixter
Note: I'm using a Canon HF-10 along with the optional Canon DW-100 DVD back-up burner.

Linking audio clips in timeline

This must be as simple as I obviously am:
I would like to link some audio clips together (which currently run one after another) in the timeline in order that I can then drag them into the the viewer where I can then alter the levels and pans across the clips as a whole.
At the moment, when I select the clips and then drag them into the viewer, I just get the first clip as if taken from the browser, with the in / out points marked (i.e. what I originally dragged from the viewer into the timeline).
Have I explained this well enough? Can anyone help please?

as usual there a few ways you can do this .. just not the way you're trying to!
you can adjust pan for a selection of clips by choosing Modify menu > Audio > Pan Left/Center/Right
you can adjust the levels for a selection of clips by choosing Modify menu > Levels... which brings up the Gain Adjust window: in there you can make a releative or absolute adjustment to the selected clips
alternatively you could select those clips then choose Sequence meny > Nest Items which will create a new sequence containing those selected clips, replacing the selection in the current sequence with a single (nested sequence clip) ... then you can drag that one up into the viewer and adjust pan and levels as if it were a single merged clip
alternatively you can change your View menu > Playhead Sync to "Open"
then as you move your playhead in the timeline/canvas the clip under the playhead will be automatically loaded into the Viewer window where you can adjust pan/levels as required

Last ~10% of audio clips do not play

My imported music tracks will not play the last approximately 10% of the clip. At first I thought it was a result of trying to use 6-10 minute music clips, as 1-3 minute tracks never seem to fail, but found that even trimming off all but the last minute of a long clip (making a 10 minute clip into a 2 minute clip) and trying to use that resulted in it's last 10% not playing!
The waveform for each audio clip shows up in its Source Tab and is just fine. But scrubbing or playing the clip works only up to about the 90% point and then sound goes silent. This is true for the Source player or when the audio is inserted into the Timeline.
I have converted the original .m4a audio files to both mp3 and wma but always with the same result. All converted clips play fine in both QuickTime and WM Player players, so it is something within CS4 Premier Pro itself that is failing.
I have tried everything I can think of without results, and have run out of ideas.
Any suggestions, anyone?

I agree re: MP3. I seldom use it, but I fell into the trap of thinking that since I was having problems with the captured CD and WMA, that certainly Premier would handle MP3, the most ubiquitous format around, without problems.
So I was really buffaloed when even the MP3 formats failed!
I usually don't do anything in WAV because the files are so large, but that said I have a 1.5 Tb drive so don't know what in the heck I am worried about!
Thanks again.

Audio clip warning & now no sound

I had audio until I removed a transition. The audio clips show a warning symbol at the front of each clip and now no sound.

i did just that 3 months ago, and they sent me a replacement within a day. (great service!)
Now this is frustrating. Here 3 months later it happened again to the other phone :/
about a week ago i began getting temp warnings again. I simply freaked out and let it "cool down" from the well airconditioning in my apartment for about a day.
This happened last night. All i did was take some of my games off and i had it sitting there for a good 2 hours while my GF and I watched a movie. I connected it to my laptop to sync a playlist i had made earlier, and the apple logo appeared. I didnt think much of it at the time, but when i returned from the 7-eleven right down the street it was still there. i picked it up and pressed home **one time** & the apple logo dissappeared my led went completely black and then shifted to that eerie black screen of death black that is acouple shades darker. Im debating on waiting to see if i can get it to boot in a day or two because still even so... I dont wanna be like "where's my sound!?!?!??!" again. Nothing i can do about it immediatly.
o btw
hard reset = fail
dfu = fail
charger (pc & wall) = fail
TERRIBLE deja-vu

Re-link/pin audio to a different clip

I have a sequence of video clips which go to music. The sequence is complete, with the audio timing working with all the clips.
Now, I want to swap the positions of two clips. The problem is that the audio track, happens to be pinned to one of these video clips. If I move one of the clips, they swap perfectly, except the audio shifts as well because it moves with the clip its pinned to. Besides manually moving the audio back to where it should be, is there a way to leave the audio alone when I do this?
I imagine it would be an easy fix if I could simply re-link the audio to a different video clip first. However, I can't find any feature along these lines. The audio seems stubbornly locked to the one clip its originally pinned to.
Thanks in advance, I'm sure there's an option to do this somewhere.

If I understand correctly, you have video clips in the primary storyline, and an audio clip connected to one of those clips.
It is easy to keep everything in sync and change two clips.
All you have to do is change the connection point of the audio clip. This is done by command-option clicking the audio clip at the desired connnection point.
Another easy way to do this is to hold down the grave key ` when dragging the clips that you want to switch.
FWIW, in this type of project it is probably better to put the audio in the primary storyline and connect the video to the audio - optionally making the video into a secondary storyline.

FR: Keep Video and Audio clips Linked in Multicam once razored

Here is my feature request, if you agree please cut and paste and submit to feature request!
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
*******Enhancement / FMR*********
Brief title for your desired feature:
Keep Video and Audio cuts in a Multicam sequence linked together when using the razor tool.
How would you like the feature to work?
Whether inside a multicam created sequence, or a multicam sequence that has been pasted into another layer on a separate sequence, I want the video and audio to remain linked together when a cut is made. Currently, when I make a cut, the audio and video become unlinked and I have to first a. make all the razor cuts, then b. go and relink the video and audio clips back together. Takes an extra 30 minutes every time now.
Why is this feature important to you?
To save time and stop the long redundant process of click selecting the video and audio and linking them, over and over and over, in a multicam sequence. Obviously if I can do it manually, it can also be done in-program.

When you create the multicam sequence manually (still the best way, I think), video and audio remain linked.

Premiere Pro CC Not Showing R button in Audio Clip Mixer

Hello everyone, I am having a problem with PP not showing the R button in my audio clip mixer. I have my mic set up under the prefrences under audio hardware and the mic is showing a good signal under windows however when I import a clip to do a voice over I Only see the M, S and Keyframe button. Am I do doing something wrong? How to I get the R button to show up and activate?

Hi Bigstick2012,
Have you tried the Audio Track Mixer? Choose Window > Audio Track Mixer.
The Clip Mixer is not the right location to record VOs.
Thanks,
Kevin

Linking Audio Clips

I am trying to combine two different audio clips together so the music is "seamless" (no break in music)....right now I have the two audio clips on the same row underneath the video clips in the timeline...I do not see how to "link" these together? Right now the first clip ends and there is a few second break in the music before the 2nd audio clip starts.

Butt the two tracks against each other. Select the edit point and press Cmd-T to make a cross fade. Drag it out to make it longer.

Breaking Link Between Audio/Video Clips

Although this question I'm sure is simple, i'm not finding it in any of the documentation.
I need ONLY the Audio portion of some of my Audio/Video Clips. I can't break the link, so that I can slide the Audio Clip around on the time line. Thanks for any info you can provide.

Either hold down the OPTION key before you click on the audio, or look on the button bar above the timeline on the right. There are two default buttons, one being LINKED SELECTION. Turn that one off and audio and video will disconnect.
Shane

Link to audio clip showing my GB crackle probs. Please listen/help.

Similar Messages

Maybe you are looking for