Link to discussion detail view or flat view gets broken If new subject view is created

Hi,
Whenever I try to create new subject view of discussion board with different name, the link to flat view for discussion detail is broken rather it opens the new subject view again. Does anyelse had this problem? and is
there any solution for this?
BR,
Alamzeb

Hi Alamzeb,
According to your description, my understanding is that when you click the subject in the new subject view, it opened the new subject view rather than going to the Flat view.
I could reproduce this issue. To fixing this issue, we need to modify the new subject view, and set it to show this view in the top-level folder. You can do as opening the view->Modify View->Folders, under ‘Show this view’, select ‘In the top-level
folder’, click OK.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Links in mails forwarded by an inbox rule get broken/removed

Hi,
after I upgraded from Exchange 2007 to Exchange 2013 I got a weired problem with auto forwared e-mails as this mails end up with broken (empty).
Only links with custom protocol headers are broken/removed, HTML links (http://, https://) are not removed.
Only internal mails forwarded by an inbound rule (created with outlook) have this problem, mails forwarded directly with Outlook or mails auto forwarded (inbox rule) to an external receipient are ok.
Original links in HTML Mail Source (partly) look like this
<a href="MIS:\\VGD12_1_KS\2014\0623\VGD12_1_Kreditsanierung_TM604_D20140623.xlsm?openmode=0">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
and end up as
<a href="">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
Any suggestion to solve or further analyse this problem is welcome.
Regards
Martin

Hi Martin,
From your description, I recommend you send the following message to an internal recipient directly and check if it will be corrupted.
<a href="MIS:\\VGD12_1_KS\2014\0623\VGD12_1_Kreditsanierung_TM604_D20140623.xlsm?openmode=0">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
I look forward to your response.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

How to add links in the detailed navigation area of the navigation panel

hi everyone,
I had developed 4 iviews. 2 of those iviews i added to 2 different pages. And the 2 pages added to workse and assigned a role. i assigned this role to user. and it is working fine.
i want to add remaining to iviews as links.
how to add the links in the detailed navigation area of the navigation panel.
regards
sunil kumar.ch

Hi sunil,
Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
Regards,
Harini S

Links to discussion in a discussion board does not work from a Custom View

Hi,
I need to limit the number of Items shown in a discussion board the the 3 latest discussions.
The solution to do this is to created a new few where I set the item limit.
.. or so I thought.
The view shows only the 3 newest items however the link to the discussions are not working. If I change the view back to the normal "Subject/AllItems.aspx" view it works fine.
Anyone has a solution for this? hovering over the title link with the mouse I can verify that the links are different.
With the standard subject view where it works:
Home.aspx?RootFolder=%2Fsites%2Ftestsite%2FLists%2Ftest%20discussion%20board%2Ftest%203%202820&FolderCTID=0x012002000DF957D933C11F498845E0406B80727A&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
With my custom view where nothing happens when I click the link:
Home.aspx?RootFolder=&FolderCTID=&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
Thank you

check this post
http://social.technet.microsoft.com/Forums/sharepoint/en-US/9fc02732-3124-4c41-b7ce-ae26f6c3c00d/how-to-limit-the-discussion-board-webpart-to-show-only-10-discussions?forum=sharepointgenerallegacy
Another article
http://technet.microsoft.com/en-us/library/cc768269.aspx

Order list not linking through to detail view

Hi all, I'm creating an order list in a secure zone, each order needs to link to the invoice of that order (the detail view). I have read:
http://forums.adobe.com/message/4348407#4348407
and
http://kb.worldsecuresystems.com/838/cpsid_83807.html?bc-partner#main_Displaying_Order_His tory
but cant seem to link from the order list to the detail view.
My list template is:
<li>
{tag_invoicedate}
{tag_invoicenumber}
{tag_invoicetotal}
{tag_status}
</li>
Are any of these tags meant to link to the detail view? I have looked for further tags which link to the detail view but cant find any.
Thanks for your reply in advance.
Karl

Yea, best is to wrap {tag_productimage} in a div with a class, i.e. <div class="order-image">{tag_productimage}</div> and "shrink" it with css:
.order-image {
 width:80px;
 height:80px;
.order-image img {
 width:100%;
You can not define a template for the detail view (I wish...), it is using the default template.
Nicole - BCGurus.com | http://bcgurus.com/Business-Catalyst-Templates for only $7

Can I view a QuickTime movie on my ipad2? When I click on link that should launch a QuickTime movie I get a blank screen.

Can I view a QuickTime movie on my ipad2? When I click on link that should launch a QuickTime movie I get a blank screen. Is there something I should download to make this work?

Install OPlayer HD and enable the QuickTime plugin to play your movies.

My safari won't let me view a pdf link, nor can I save it as a document. How can I view these pdfs and links?

My safari won't let me view a pdf link, nor can I save it as a document. How can I view these pdfs and links?

Have you installed Adobe Reader and its associated plugin? AFAIK, that's the preferred if not the only way to open PDFs in an embedded view within Safari.
http://get.adobe.com/reader/

Cannot set user query to view "{0}" because it is a destination in a view link

Hi
11.1.1.7 - I have 2 programatically view objects. I have created a viewLink between them and I am getting the error:
Cannot set user query to view "MyView2" because it is a destination in a view link.
Does anyone know what are the methods I need to implement? I have follow the Frank Nimphius Post: Oracle ADF: Service, Please! and it is working fine. However, after seeing this example: Decompiling ADF Binaries: Building programmatically managed business components - Part 2 - I realised that I am missing some other stuff to make the view link work. There are too many methods and its quite difficult to understand and digest all classes and methods etc.
Anyone can please point me in the right direction?
Regards

Which version are you using? Could you maybe turn on logging (http://blog.goverco.com/p/psmalogging.html) and post content of log file if you still have the issue...
Also, remember that even though you set credentials in the PARAM section, these values are overwritten by the ones specified on the properties of the MA - so make sure that you specify correct creds on the MA. Specifying creds directly in the script makes
for an easy way of testing from the PowerShell prompt, but not for running the script from the MA / Run Profiles
Regards, Soren Granfeldt
blog is at http://blog.goverco.com | facebook https://www.facebook.com/TheIdentityManagementExplorer | twitter at https://twitter.com/#!/MrGranfeldt

While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond.

While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond. This has been happening ever since the last update.

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

How to get a message in a view which was raised in another view?

Hi All,
I have used the view manager message serviice to add my custom error message in BT126H/Apptdetails view. So if the validation fails then the message is displayed on the screen . But when I am saving the transaction the error message is getting disappeared and I am able to save the transaction. So just before saving ie in the method EH_ONSAVE in overviewset view I will query that message but as it was added in the appt details view I am not getting that message in overview set .
Can anyone tell me how can I get that particular message in overview set?
Thanks and Regards
Sweta

hi,
In your Subinventory LOV add Bin variable using it Query tab. which has Bind VAriable And View Criteria section.use Bind Variable section. those are in the view object level.
then your all lov include view object select and choose it View Accessors section. it has your lov and Edit your Subinventory LOV and then popup dialog box. Inside it you can make Inside Parametor section select relevant bind variable name and it need value.
thaks.

How do I get rid of duplicate identical views of iCloud contacts in 'Contacts' on my iMac

Here is the left hand window as it appears in my address book. I had to disconnect from iCloud in order to restore Photo Stream. The recent iPhoto update had disconnected iPhoto and Photo Stream. This is now repaired and everything else (Calendars, Notes, Reminders, iWork) seems to be working well. There are no duplicate contacts just two ways of accessing the same lists. iCloud to iPad is fine.
How can I get rid of the duplicate view? Seen similar problems on this site but not found anything quite the same.

Found the answer myself while helping to set up iPhone. It is simple when you know how. Before signing out of iCloud to sign in again and restore the link to Photo Stream I had opted to copy iCloud contacts to the Mac. When I signed in again this created two iCloud views which can be seen in Contacts Preferences. I just disabled one of them. Not brave enough to attempt removal but I gues this would work too.

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution?

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution? I'm using Andriod version 4.4.2 with kernal 3.4.0.

@MaloneTP
Thanks for keeping me updated! Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air? Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY. Keep me posted. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

IPhone 6: i accidentally tapped my iPhone 6 and everything got huge on my screen. now i can't even log onto my phone because everything is so big on the screen. how do i get it back to normal view, so i can log on?

i accidentally tapped my iPhone 6 and everything got huge on my screen. now i can't even log onto my phone because everything is so big on the screen. how do i get it back to normal view, so i can log on?

i googled for answer to resolve the zoom problem. all the anwers just told you to read links but didn't tell how to fix the screem back to normal then it can be able to go to Setting to fix the zoom funciton. HOWEVER, I accidentally found the solution myself by using a fingers or more
to draw circles clockwise on the screen....it will reset it normally. I spent hours trying to go diagonally, compressively still didn't work.

How can i get data from a maintance view?

Hi all.
    Can you give me some suggestion about 'How can i get data from a maintance view?'?
     Thanks
     Best regard

hi
good
go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecdf446011d189700000e8322d00/content.htm
thanks
mrutyun^

Link to discussion detail view or flat view gets broken If new subject view is created

Similar Messages

Maybe you are looking for