Link to downlaod GW Gateway for Exchange v7.03 or earlier
I use the GroupWise Gateway for Exchange 7.02 4/25/2007 which crash frequently. I does not find earlier versions from the public support.novell website.
Could you please send me the link to download or the package directly which run without crash ?
Thanks a lot
Mail : [email protected]
vellard,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Groupwise 7 Gateway for Exchange
I am testing the Novell Groupwise Gateway for Exchange SP2. I have already tested the API Gateway but wanted to try the newer version because it will be supported for awhile. I downloaded the install and went through all the instructions. I am using Groupwise 7.0.1 and Exchange 2003. The install went fine and the configurations are correct but I must be missing something. When I go to start the Gateway Application it starts then stops. I checked on the GW MTA and it says the link is Closed. The reason the link it closed it says can't create directories. I checked the Gateway application and it shows Groupwise link closed and other link Open. I logged into a ws as the same user to check the rights and I was able to create a new directory in the domain directory. I changed the logging to verbose on the Exchange Gateway to see if I can see an error and it says trying to re-establish GW link.
03-11-08 10:17:53 0 Begin Configuration Information
03-11-08 10:17:53 0 Platform= Windows 2003 (TM) Version 5.2 (Build 3790) Serv
ice Pack 2
03-11-08 10:17:53 0 Domain and gateway= VMDomain.Exchange_Gateway1
03-11-08 10:17:53 0 Foreign Name= <none specified>
03-11-08 10:17:53 0 Description= <none specified>
03-11-08 10:17:53 0 Alias Type= Exchange
03-11-08 10:17:53 0 Root Directory= \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
teway1
03-11-08 10:17:53 0 Work Directory= \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
teway1\000.prc\gwwork
03-11-08 10:17:53 0 Log File= \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Gateway1
\000.prc\0311log.001
03-11-08 10:17:53 0 Directory ID= exc367d
03-11-08 10:17:53 0 Directory Synchronization= NO
03-11-08 10:17:53 0 Directory Exchange= NO
03-11-08 10:17:53 0 Accounting= YES
03-11-08 10:17:53 0 Access Control= NO
03-11-08 10:17:53 0 Convert GroupWise Status to Messages= NO
03-11-08 10:17:53 0 Outbound Status Level= OPEN
03-11-08 10:17:53 0 Log Level= Verbose
03-11-08 10:17:53 0 Log Max Age= 7 days
03-11-08 10:17:53 0 Log Max Space= 1024 kb
03-11-08 10:17:53 0 Enable Recovery= YES
03-11-08 10:17:53 0 Retry Count= 10
03-11-08 10:17:53 0 Retry Interval= 60 seconds
03-11-08 10:17:53 0 Failed Recovery Wait= 3600 seconds
03-11-08 10:17:53 0 Network Reattach Command= <none specified>
03-11-08 10:17:53 0 Correlation DB Enabled= YES
03-11-08 10:17:53 0 Correlation DB Age= 14 days
03-11-08 10:17:53 0 Correlation DB Directory= \\VMNW65\data\VMDOMAIN\wpgate\E
xchange_Gateway1
03-11-08 10:17:53 0 Send/Receive Cycle= 2 minutes
03-11-08 10:17:53 0 Minimum Run= 0 minutes
03-11-08 10:17:53 0 Idle Sleep Duration= 30 seconds
03-11-08 10:17:53 0 Snap Shot Interval= 10 minutes
03-11-08 10:17:53 0 Time Zone= PST
03-11-08 10:17:53 0 GMT Offset= -8 hours, 0 minutes
03-11-08 10:17:53 0 Hemisphere= NORTH
03-11-08 10:17:53 0 Daylight Saving Change= 1 hours, 0 minutes
03-11-08 10:17:53 0 Daylight Saving Begin= 4/6 (month/day)
03-11-08 10:17:53 0 Daylight Saving End= 10/26 (month/day)
03-11-08 10:17:53 0 Procedure ID= 000
03-11-08 10:17:53 0 SNMP On
03-11-08 10:17:53 0 Gateway Build Timestamp: Wednesday, April 25, 2007 15:30:38
03-11-08 10:17:53 0 GWIN.DLL Build Timestamp: Wednesday, April 25, 2007 15:32:2
4
03-11-08 10:17:53 0 GWOUT.DLL Build Timestamp: Wednesday, April 25, 2007 15:33:
50
03-11-08 10:17:53 0 Startup Switches= /Home-\\VMNW65\data\VMDOMAIN\wpgate\Exc
hange_Ga
03-11-08 10:17:53 0 teway1 /rt-1 /st-1 /group /Custom /appl
03-11-08 10:17:53 0 End Configuration Information
03-11-08 10:17:54 0 Checking the correlation DB
03-11-08 10:17:54 0 Correlation DB check complete
03-11-08 10:17:54 0 The gateway is attempting to reestablish the GroupWise linkThe gateway directory has to be in less that 8 chars, or at least 8.3...
On Netware the agents have this restriction.
Morris
cnakagaw wrote:
> I am testing the Novell Groupwise Gateway for Exchange SP2. I have
> already tested the API Gateway but wanted to try the newer version
> because it will be supported for awhile. I downloaded the install and
> went through all the instructions. I am using Groupwise 7.0.1 and
> Exchange 2003. The install went fine and the configurations are correct
> but I must be missing something. When I go to start the Gateway
> Application it starts then stops. I checked on the GW MTA and it says
> the link is Closed. The reason the link it closed it says can't create
> directories. I checked the Gateway application and it shows Groupwise
> link closed and other link Open. I logged into a ws as the same user to
> check the rights and I was able to create a new directory in the domain
> directory. I changed the logging to verbose on the Exchange Gateway to
> see if I can see an error and it says trying to re-establish GW link.
>
>
> 03-11-08 10:17:53 0 Begin Configuration Information
> 03-11-08 10:17:53 0 Platform= Windows 2003 (TM) Version 5.2 (Build
> 3790) Serv
> ice Pack 2
> 03-11-08 10:17:53 0 Domain and gateway= VMDomain.Exchange_Gateway1
> 03-11-08 10:17:53 0 Foreign Name= <none specified>
> 03-11-08 10:17:53 0 Description= <none specified>
> 03-11-08 10:17:53 0 Alias Type= Exchange
> 03-11-08 10:17:53 0 Root Directory=
> \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
> teway1
> 03-11-08 10:17:53 0 Work Directory=
> \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Ga
> teway1\000.prc\gwwork
> 03-11-08 10:17:53 0 Log File=
> \\VMNW65\data\VMDOMAIN\wpgate\Exchange_Gateway1
> \000.prc\0311log.001
> 03-11-08 10:17:53 0 Directory ID= exc367d
> 03-11-08 10:17:53 0 Directory Synchronization= NO
> 03-11-08 10:17:53 0 Directory Exchange= NO
> 03-11-08 10:17:53 0 Accounting= YES
> 03-11-08 10:17:53 0 Access Control= NO
> 03-11-08 10:17:53 0 Convert GroupWise Status to Messages= NO
> 03-11-08 10:17:53 0 Outbound Status Level= OPEN
> 03-11-08 10:17:53 0 Log Level= Verbose
> 03-11-08 10:17:53 0 Log Max Age= 7 days
> 03-11-08 10:17:53 0 Log Max Space= 1024 kb
> 03-11-08 10:17:53 0 Enable Recovery= YES
> 03-11-08 10:17:53 0 Retry Count= 10
> 03-11-08 10:17:53 0 Retry Interval= 60 seconds
> 03-11-08 10:17:53 0 Failed Recovery Wait= 3600 seconds
> 03-11-08 10:17:53 0 Network Reattach Command= <none specified>
> 03-11-08 10:17:53 0 Correlation DB Enabled= YES
> 03-11-08 10:17:53 0 Correlation DB Age= 14 days
> 03-11-08 10:17:53 0 Correlation DB Directory=
> \\VMNW65\data\VMDOMAIN\wpgate\E
> xchange_Gateway1
> 03-11-08 10:17:53 0 Send/Receive Cycle= 2 minutes
> 03-11-08 10:17:53 0 Minimum Run= 0 minutes
> 03-11-08 10:17:53 0 Idle Sleep Duration= 30 seconds
> 03-11-08 10:17:53 0 Snap Shot Interval= 10 minutes
> 03-11-08 10:17:53 0 Time Zone= PST
> 03-11-08 10:17:53 0 GMT Offset= -8 hours, 0 minutes
> 03-11-08 10:17:53 0 Hemisphere= NORTH
> 03-11-08 10:17:53 0 Daylight Saving Change= 1 hours, 0 minutes
> 03-11-08 10:17:53 0 Daylight Saving Begin= 4/6 (month/day)
> 03-11-08 10:17:53 0 Daylight Saving End= 10/26 (month/day)
> 03-11-08 10:17:53 0 Procedure ID= 000
> 03-11-08 10:17:53 0 SNMP On
> 03-11-08 10:17:53 0 Gateway Build Timestamp: Wednesday, April 25, 2007
> 15:30:38
> 03-11-08 10:17:53 0 GWIN.DLL Build Timestamp: Wednesday, April 25,
> 2007 15:32:2
> 4
> 03-11-08 10:17:53 0 GWOUT.DLL Build Timestamp: Wednesday, April 25,
> 2007 15:33:
> 50
> 03-11-08 10:17:53 0 Startup Switches=
> /Home-\\VMNW65\data\VMDOMAIN\wpgate\Exc
> hange_Ga
> 03-11-08 10:17:53 0 teway1 /rt-1 /st-1 /group /Custom /appl
> 03-11-08 10:17:53 0 End Configuration Information
> 03-11-08 10:17:54 0 Checking the correlation DB
> 03-11-08 10:17:54 0 Correlation DB check complete
> 03-11-08 10:17:54 0 The gateway is attempting to reestablish the
> GroupWise link
>
> -
Groupwise Gateway for Exchange
We are trying to setup the GroupWise gateway for exchange. The exchange server, the GroupWise Gateway for Exchange and the domain that owns the gateway are all installed on the same Windows 2003 server, along with the novell client and the Groupwise client.
When we try to start the gateway, we get a series of errors that are shown in TID#3644821 and we have gone through those settings and verfiied everything.
07-24-07 16:45:58 0 ********************* Gateway Started *******************
07-24-07 16:45:58 0 ****** 2007-07-24 16:45:58 ******
07-24-07 16:45:58 0 {GweCorr:GweCorrInit
07-24-07 16:45:58 0 }GweCorr:GweCorrInit
07-24-07 16:45:58 0 {GWEACCT:GweAcctInit
07-24-07 16:45:58 0 }GWEACCT:GweAcctInit
07-24-07 16:45:58 0 OK
07-24-07 16:45:58 0 {GWEAC:GweacInit
07-24-07 16:45:58 0 }GWEAC:GweacInit
07-24-07 16:45:58 0 OK
07-24-07 16:45:58 0 Address Type : GWISE
07-24-07 16:45:58 0 Display Name : System Administrator
07-24-07 16:45:58 0 Email Address : emailadmin
07-24-07 16:45:58 0 Inbound Converter : GROUPWISE.INBOUND
07-24-07 16:45:58 0 Outbound Converter : GROUPWISE.OUTBOUND
07-24-07 16:45:58 0 \\vcexchange1\d$\grpwise\vcexdom\wpgate\vcexch
07-24-07 16:45:58 0 vcexdom
07-24-07 16:45:58 0 SOFTWARE\Novell\GroupWise Gateways\Exchange\vcexdom\vcexch\
Parameters
07-24-07 16:45:58 0 Could not open registry parent key to get Display Name info
rmation. Using defaults..
07-24-07 16:45:58 0 {XDXSUtils2000:ReadExpContainerEx2000
07-24-07 16:45:58 0 ERROR (E01) 0323004 - Unable to bind to the Gateway Object
07-24-07 16:45:58 0 ADsPath - LDAP://cn=vcexch,cn=Connections,CN=First Routing
Group,cn=Routing Groups,cn=First Administrative Group,cn=Admin
istrative Groups,cn=SanMateoCounty,cn=Microsoft Exchange,cn=Se
rvices,cn=Configuration,DC=csmservices,DC=SANMATEO COUNTY,DC=AD
S - hr: 2030
07-24-07 16:45:58 0 }XDXSUtils2000:ReadExpContainerEx2000
07-24-07 16:46:01 0 {GWEACCT:GweSendAcctFile
07-24-07 16:46:01 0 }GWEACCT:GweSendAcctFile
07-24-07 16:46:01 0 OK
07-24-07 16:46:01 0 ****** 2007-07-24 16:46:01 ******
07-24-07 16:46:01 0 ******************** Gateway Terminated *****************
07-24-07 16:46:01 0 {GWEAC:GweacQuit
07-24-07 16:46:01 0 }GWEAC:GweacQuit
07-24-07 16:46:01 0 OK
07-24-07 16:46:01 0 {GWEACCT:GweAcctQuit
07-24-07 16:46:01 0 }GWEACCT:GweAcctQuit
07-24-07 16:46:01 0 OK
In the install/admin guide V7, may 8, 2007, page 36, it referrs to modifying the gateway connector and specifying an "administrator username and password." The field says "netware account"." We went ahead and used a netware account here.
We are seeing several errors in the event log:
Logon Failure on database "First Storage Group\Mailbox Store (VCEXCHANGE1)"- Windows 2000 account SANMATEOCOUNTY\ExchangeMailAdmin; mailbox /o=SanMateoCounty/ou=First Administrative Group/cn=configuration/CN=Connections/CN=vcexch.
Error: -2147221237
vcexch is the name of the gateway.
and
Logging on NetWare server with remote location '\\vcexchange1\D$', userid 'cn=xxx,ou=xxx,o=xx'
then
Error occurred when logging on NetWare server.
The system error code is 2202
The specified username is invalid.
what netware server is the account tyring to log into. this path is not identified anywhere that we can find. Should we actually identify a windows account here?
What shall we try now? Any ideas?
Thanks,
Stormy MadduxThis TID will RESolve this issue 3940684
>>> On 7/24/2007 at 6:17 PM, in message
<[email protected]>, Stormy
Maddux<[email protected]> wrote:
> We are trying to setup the GroupWise gateway for exchange. The exchange
> server, the GroupWise Gateway for Exchange and the domain that owns the
> gateway are all installed on the same Windows 2003 server, along with the
> novell client and the Groupwise client.
>
> When we try to start the gateway, we get a series of errors that are
> shown in TID#3644821 and we have gone through those settings and verfiied
> everything.
>
> 07-24-07 16:45:58 0 ********************* Gateway Started
> *******************
> ***
> 07-24-07 16:45:58 0 ****** 2007-07-24 16:45:58 ******
> 07-24-07 16:45:58 0 {GweCorr:GweCorrInit
> 07-24-07 16:45:58 0 }GweCorr:GweCorrInit
> 07-24-07 16:45:58 0 {GWEACCT:GweAcctInit
> 07-24-07 16:45:58 0 }GWEACCT:GweAcctInit
> 07-24-07 16:45:58 0 OK
> 07-24-07 16:45:58 0 {GWEAC:GweacInit
> 07-24-07 16:45:58 0 }GWEAC:GweacInit
> 07-24-07 16:45:58 0 OK
> 07-24-07 16:45:58 0 Address Type : GWISE
> 07-24-07 16:45:58 0 Display Name : System Administrator
> 07-24-07 16:45:58 0 Email Address : emailadmin
> 07-24-07 16:45:58 0 Inbound Converter : GROUPWISE.INBOUND
> 07-24-07 16:45:58 0 Outbound Converter : GROUPWISE.OUTBOUND
> 07-24-07 16:45:58 0 \\vcexchange1\d$\grpwise\vcexdom\wpgate\vcexch
> 07-24-07 16:45:58 0 vcexdom
> 07-24-07 16:45:58 0 SOFTWARE\Novell\GroupWise
> Gateways\Exchange\vcexdom\vcexch\
> Parameters
> 07-24-07 16:45:58 0 Could not open registry parent key to get Display
> Name info
> rmation. Using defaults..
> 07-24-07 16:45:58 0 {XDXSUtils2000:ReadExpContainerEx2000
> 07-24-07 16:45:58 0 ERROR (E01) 0323004 - Unable to bind to the Gateway
> Object
> 07-24-07 16:45:58 0 ADsPath - LDAP://cn=vcexch,cn=Connections,CN=First
> Routing
> Group,cn=Routing Groups,cn=First Administrative
> Group,cn=Admin
> istrative Groups,cn=SanMateoCounty,cn=Microsoft
> Exchange,cn=Se
>
> rvices,cn=Configuration,DC=csmservices,DC=SANMATEO COUNTY,DC=AD
> S - hr: 2030
> 07-24-07 16:45:58 0 }XDXSUtils2000:ReadExpContainerEx2000
> 07-24-07 16:46:01 0 {GWEACCT:GweSendAcctFile
> 07-24-07 16:46:01 0 }GWEACCT:GweSendAcctFile
> 07-24-07 16:46:01 0 OK
> 07-24-07 16:46:01 0 ****** 2007-07-24 16:46:01 ******
> 07-24-07 16:46:01 0 ******************** Gateway Terminated
> *****************
> ***
> 07-24-07 16:46:01 0 {GWEAC:GweacQuit
> 07-24-07 16:46:01 0 }GWEAC:GweacQuit
> 07-24-07 16:46:01 0 OK
> 07-24-07 16:46:01 0 {GWEACCT:GweAcctQuit
> 07-24-07 16:46:01 0 }GWEACCT:GweAcctQuit
> 07-24-07 16:46:01 0 OK
>
> In the install/admin guide V7, may 8, 2007, page 36, it referrs to
> modifying the gateway connector and specifying an "administrator username
> and password." The field says "netware account"." We went ahead and
> used a netware account here.
>
> We are seeing several errors in the event log:
>
> Logon Failure on database "First Storage Group\Mailbox Store
> (VCEXCHANGE1)" - Windows 2000 account SANMATEOCOUNTY\ExchangeMailAdmin;
> mailbox /o=SanMateoCounty/ou=First Administrative
> Group/cn=configuration/CN=Connections/CN=vcexch.
> Error: -2147221237
>
> vcexch is the name of the gateway.
>
> and
>
> Logging on NetWare server with remote location '\\vcexchange1\D$',
> userid 'cn=xxx,ou=xxx,o=xx'
> then
> Error occurred when logging on NetWare server.
> The system error code is 2202
> The specified username is invalid.
>
> what netware server is the account tyring to log into. this path is
> not identified anywhere that we can find. Should we actually identify a
> windows account here?
>
> What shall we try now? Any ideas?
>
> Thanks,
>
> Stormy Maddux -
Linux mail gateway for exchange server
hi everybody...
i have a problem that i want run a linux os and install Mail gateway such as kaspersky mail gateway 5.6 for work with exchange server 2010/2013. now i want know about that its possible that kaspersky mail gateway 5.6 or any other mail gateway on the linux
os can work for Microsoft exchange or not??????????
please help me and guide me for this problemHi,
From the perspective of Exchange, there is no relevant requirement about gateway. Based on my knowledge, it is possible that kaspersky mail gateway 5.6 or any other mail gateway on the linux os can work for Microsoft Exchange.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
SAP Internet Mail Gateway for MS Exchange 2003 Server
Hi,
Has anybody successfully configured the IMG to work with MS Exchange 2003?
We have our 4.6C currently configured to talk to Exchange 2000 through SXC
Note 594428 - SXC: Exchange 2003 Server is not supported
Solution
R/3 Basis Release 3.1I to 4.6D:
Use IMG 4.6D and sendmail instead of the SXC (see note 101573), or
Upgrade your SAP system to Web Application Server (WAS) 6.10 or later and then use the SMTP plugin.
We only use outbound mail from SAP and this is sent to intranet users only, we are not planning on upgrading for a at least a year and would like to avoid installing another mail server.
Note 363154 - Internet mail gateway: use other MTA than Sendmail
This note suggests that any MTA (Mail Transfer Agent) can be used so long as it can be called from the command line, Exchange is an MTA, anybody now how to do a command line call for Exchange?
I have read the documentation
http://help.sap.com/saphelp_46c/helpdata/en/0c/39c93589c5ab53e10000009b38f839/frameset.htm
Jasperhi,
we are in the process of configuring the Internet Mail Gateway on R/3 4.6c on Unix platform.
I have created the RFC Destinations in SM59 and also checked the Test Connection and its working fine. I then did the Unix configuration and went on to the check whether the configuration was successful in SO01 by sending a sample text message to my company's mail address. but i did not recieve any mails on my Microsoft Outlook, instead the count under the errors column increased by one.
on checking the status for the sent message in SO01, its saying "No Delivery to [email protected](for reason, see long text)... but there's no long text either...
Can anyone please let me know the reasons for it and it would also be really helpful if someone can let me know whether i have missed any configuration settings.
Also, can someone send the list of parameters that are to be entered for the Unix configuration under mlsomadm mailgw.ini, so that i can verify whether i have entered the parameters correctly....
Kindly revert back at the earliest...
Thanks & Regards
Manicks -
GroupWise 7 Gateway For MS Exchange error
"The gateway is attempting to reestablish the GroupWise link" when starting
the gateway on the Exchange server. It's in a loop restarting. The user
logged in the the server has full rights to both AD and Edirectory and the
GW Domain. Any ideas what is causing this? The "other" link opens but not
the Groupwise. Rights??
DDave,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
GroupWise 7.0 API Gateway is supported for Exchange 2007?
Can someone confirm that GroupWise 7.0 API Gateway is supported for Exchange 2007?
I found a note in a guide that stated it was not YET supported as of 1/27/2008.bwalker2,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Mail For Exchange - Compatability/Downloads menu i...
Using N79
SW 31.002.205.4.
Up until this morning running MfE 2.9.158. Just been offerred 2.9.160 via App.Update. Post install check indicates this has been available for months - why the delay in pushing it through to App.Update?
MfE 2.9.160 still not fixed old issue of being unable to open MfE settings following phone restart - why not? - threads dating back to 1st quarter 2009! but this one explains the issue precisely:
/t5/Messaging-Email-and-Browsing/Mail-for-Exchange-corrupted/m-p/603626/highlight/true#M21922
It's the only app on my phone that cannot be routinely opened - not good.
Notwithstanding this idiosyncrasy email syncing is more hit than miss but falls way short of my iPod touch which is 100% rock solid regarding Exchange compatability. Does Nokia want Exchange Server based customers- my guess is not enough. Generally speaking if I notice emails hitting my iPod but not my N79 it's time for a phone restart. But that kills the ability to open MfE settings So it's back to a re-install.
If the above isn't bad enough Nokia has just made it worse. This "current" link from the N79 support page is dead;
http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
and after much dead-ending find that the Ovi Store now contains MfE - no problem with that it makes sense to consolidate. But no mention of N79 being supported by the latest greatest MfE and Ovi only lists 3.0 as supporting FP1 phones - so wht about FP2?
Is my N series phone supported anymore - I've got no idea.
Wake up Nokia it's 2010 not 1990 - we shouldn't have to put up with this **bleep** in basic functionality.
Judging by lack of action over the past 12 months have no hope Nokia will put this right but that my dear Nokia is how you lose customers to your rivals Apple and RIM. Pull your finger out.I'm hoping this fix works for me long term and post as is.
Multiple phone calls to Nokia Tier 1 and 2 phone support heavily supplemented by some determined Google searching led me to the following solution.
First off the bad news. To fix the MfE issue requires a hard reset of the device. There's no way around this so resign yourself to it early.
The good news however is you can dramatically reduce the time needed to return your device back to its pre-reset condition by backing up your device using Ovi Suite. Forget to do this and you'll be re-installing your apps one at a time.
My issue was made more difficult because the usual hard re-set code (*#7370 #) would not reset the device i.e. full recovery of phone memory, complete wiping of contacts etc. Ignoring Nokia's advice to return the phone for repair! I turned up an alternative method which achieved the hard re-set I was seeking.
As follows:
Hold these three keys down - *, 3 and green accept call - whie the phone is off, then power on keeping them depressed until the Nokia logo plays.
On the N79 this involves an usual amount of manual dexterity but nevertheless worked where the re-set code failed. Hopefully this won't be necessary for most users.
Once re-set you will be presented with the Set up menu as per a new phone.
With a fully recovered phone memory you can now restore your earlier backup via Ovi Suite, which for me did 90% of the work needed to get my phone back to its earlier personalised condition. I took the opportunity of checking for any programme updates of essential apps and updated as necessary. Re-installation of Speed Dial settings and permitted Bluetooth devices amongst other items was required but all in all all my data and file structure was faithfully restored first time around.
I am now running MfE 3.0 (actually 2.09.208 - see initial thread posting ) which Nokia support advise is not supported for the N79 - given the varying level of advice received I'm prepared to run with my own view that it works fine. If you wish to play safe you should be running 2.9.160.
I have re-booted the phone multiples times over the last two days and on only one occasion (which I'm going to pretend never happened) MfE has been rock solid. In addition Ovi Maps which had stopped opening - and was fundamentally what set me off down the road of a hard re-set - is now working perfectly.
I'm hoping this cures the irritating MfE problem long term pending Nokia sorting out whether they even support the N79 any longer as far as MfE is concerned.
As a sign off I will just say for my purposes the N79 is the best smartphone I've ever owned and supplemented with an iPod Touch is a fantastic work/play combination. If you are allowed tethering on your contract I contend Walking Hot Spot is THE killer app and so confident am I of my choice of phone I've just bought a second N79, at a much reduced price, which I'm going to use as a backup/extension to my existing N79 when it dies and goes to heaven.
Hope this post saves someone else some timeand effort. -
Gateway for informix: Unsupported Informix Server and other errors
I set up the Database Gateway for Informix on WinXP 32 to connect from an Oracel 10gR2 Database to an Informix Database (Infomix Online Dynamic Server V7.31UP1).
The basic connection seems to work (giving a wrong password in the database link results in an appropriate error message), but the test-statement "select * from DUAL@DLTEST" (and any other select) results in the following error message:
>>>>>>>>>>>>>>>>>
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC Informix Wire Protocol driver]Unsupported Informix Server
version.[Oracle][ODBC Informix Wire Protocol driver]Invalid attribute in
connection string: ArraySize.[Oracle][ODBC Informix Wire Protocol
driver]Invalid attribute in connection string: TruncateOversizedColumnValues.
ORA-02063: preceding 2 lines from DLTEST
<<<<<<<<<<<<<<<<<
Setting HS_FDS_TRACE_LEVEL=DEBUG gives the following trace-output in <oracle_home>\dg4ifmx\trace\dg4ifmx_agt_2716.trc:
>>>>>>>>>>>>>>>>>>>
Oracle Corporation --- MONTAG JUN 09 2008 13:59:13.671
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONTAG JUN 09 2008 13:59:13.671
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "straf" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "dg4ifmx"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for INFORMIX
Facility:hsa
Class:IFMX, ClassVsn:11.1.0.6.0_0006, Instance:dg4ifmx
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=46
HOCXU_SEM_VER=100000
Entered hgolofn at 2008/06/09-13:59:14
RC=-1 from HOSGIP for "PATH"
PATH from environment is "D:\oracle_11g\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Programme\jdk1.4\bin;d:\programme\GTK\2.0\bin;"D:\Programme\Hummingbird\Connectivity\7.00\Accessories\";d:\Tools\GTK_2.0\bin;d:\tools\IsoBuster"
Exiting hgolofn, rc=0 at 2008/06/09-13:59:14
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/06/09-13:59:14
Entered hgolgon at 2008/06/09-13:59:14
reco:0, name:straf, tflag:0
Entered hgosuec at 2008/06/09-13:59:14
uencoding=UTF16
Entered shgosuec at 2008/06/09-13:59:14
Exiting shgosuec, rc=0 at 2008/06/09-13:59:14
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2008/06/09-13:59:14
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "straf"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using straf as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/06/09-13:59:15
HS_FDS_CONNECT_INFO = "sijus10000:22231/si10000onl/kwadbstr"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/06/09-13:59:15
dsn:sijus10000:22231/si10000onl/kwadbstr, name:straf
optn:
Entered shgogohn at 2008/06/09-13:59:15
ohn is 'OraGtw11g'
Exiting shgogohn, rc=0 at 2008/06/09-13:59:15
Entered hgocont_OracleCsidToIANA at 2008/06/09-13:59:15
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2008/06/09-13:59:15
##>Connect Parameters (len=299)<##
## DRIVER=Oracle 11g dg4ifmx-OraGtw11g;
## HostName=sijus10000;
## PortNumber=22231;
## ServerName=si10000onl;
## Database=kwadbstr;
#! UID=straf;
#! PWD=*
## ApplicationUsingThreads=1;
## CancelDetectInterval=0;
## TrimBlankFromIndexName=1;
## IANAAppCodePage=2252;
## ArraySize=100;
## UseDelimitedIdentifier=1;
## TruncateOversizedColumnValues=0;
Exiting hgogenconstr, rc=0 at 2008/06/09-13:59:15
Entered hgopoer at 2008/06/09-13:59:15
hgopoer, line 159: got native error 0 and sqlstate HY000; message follows...
[Oracle][ODBC Informix Wire Protocol driver]Unsupported Informix Server version.[Oracle][ODBC Informix Wire Protocol driver]Invalid attribute in connection string: ArraySize.[Oracle][ODBC Informix Wire Protocol driver]Invalid attribute in connection string: TruncateOversizedColumnValues.
Exiting hgopoer, rc=0 at 2008/06/09-13:59:15
hgocont, line 1890: calling SqlDriverConnect got sqlstate HY000
Exiting hgocont, rc=28500 at 2008/06/09-13:59:15 with error ptr FILE:hgocont.c LINE:1910 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2008/06/09-13:59:15 with error ptr FILE:hgolgon.c LINE:612 ID:Calling hgocont
Entered hgoexit at 2008/06/09-13:59:15
Exiting hgoexit, rc=0 at 2008/06/09-13:59:15
<<<<<<<<<<<<<<<<<<<<<<<<
What's going wrong ?
Regards KlausHello,
I downloaded the gateway package of Oracle version 11.1.0.6.0, and installed Informix gateway driver. I made the necessary settings, and i have exactly the same problem, as described above.
I receive error message "OracleODBC Informix Wire Protocol driverUnsupported Informix Server version.OracleODBC Informix Wire Protocol driverInvalid attribute in connection string: ArraySize.OracleODBC Informix Wire Protocol driverInvalid attribute in connection string: TruncateOversizedColumnValues." when trying to set up a connection from Oracle to Informix 7.3. I read here, that there is a patch of Informix gateway: fix 6799360, which is unfortunately not available for for download for Windows XP. I cannot search MetaLink for this problem, because I just would like to test this Oracle feature, I did not buy Oracle license.
Does anybody know about this patch? Can anybody help how could I make working this Informix gateway?
Thanks for help, Gyula -
How to set default website for exchange 2010
I'm unable to launch the Exchange Management Console, and then I read that it's necessary to set the default web site in a particular way, in order for Exchange 2010 Management Console to work:
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/4d396628-3867-4c95-9541-e0eb021e0135
However, after setting up Sharepoint, I see that it has modified the default website, and I'd like to ask for specific settings on how the default web site bindings should look (for exchange). Could someone please advise what I need to do to correct it?
I'm having trouble interpreting what Mike Crowley recommends in the linked post above, in terms of actual steps to the site binding information (which won't mess up what exists).
Currently it says:
Type port ip address binding information
net.tcp
808:*
net.pipe
net.msmq localhost
msmq.formatname localhost
http 80 127.0.0.1
https 443 *
http 80 *
https 443 127.0.0.1
It seems the line for http on port 80 is *, which I guess is equivalent to 'all unassigned'. Is the previous http port 80 binding to 127.0.0.1 causing the problem?
But I'm also supposed to set a Powershell VDir in IIS. Can someone provide steps for that?Regarding SharePoint on Exchange:
It was not allowed earlier, as documented here:
http://office.microsoft.com/en-us/sharepoint-portal-server-it/coexistence-and-interoperability-guide-for-sharepoint-products-and-technologies-HA001160777.aspx & here:
http://support.microsoft.com/kb/825505 but there doesn't seem to be anything more recent than this. I would work under the assumption it is not supported outside of
SBS 2011 (which I am not very familiar
with).
Mike Crowley
Check out My Blog! -
Not able to create a database link using the database gateway of oracle 11g
HI,
While trying to create a database link to SQL server from Oracle ,using the database gateway provided with 11g, i am getting the following error while making use of it in selecting columns from tables :
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
These are the steps i have followed for setting up:
1.Ran the set up for the Database gateway.and mentioned the SQL server name and database .ALos set up a listener.
2. Added the following in the Listener.ora of Oraclehome 11/NETWORK/ADMIN:
LISTENER_SQL_FCD =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost) (PORT = 1541)
SID_LIST_LISTENER_SQL_FCD =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME= D:\app\20537\product\11.1.0\db_3)
(PROGRAM=dg4msql)
3.Added the following in tnsnames.ora inOracle home/NETWORK/ADMIN:
dg4msql=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1541))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
4. Following is the entry in initdg4msql.ora in C:\product\11.1.0\tg_5\dg4msql\admin:
HS_FDS_CONNECT_INFO=10.148.45.242:1433//SalesDemo
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
5. Created the database link :
create database link dblink
connect to "sa" identified by "<pswd>"
using 'dg4msql'
On running :select * from test1@dblink i get the following error:
Error starting at line 1 in command:
select * from test1@dblink
Error at Command Line:1 Column:20
Error report:
SQL Error: ORA-28513: internal error in heterogeneous remote agent
ORA-02063: preceding line from DBLINK
Is there any issue with the set or definition that I get the above error?What is the version of the Oracle database in which you have specified/and use the database link?
If it is for example 10.2.0.3.0 you need to apply the mandatory patch for RDBMS bug 5965763 first before being able to use an 11g gateway. Have a look at MetaLink note 457808.1 for details about this patch.
Regards,
Ed -
I am unable to receive mail in my hotmail account. Message asks for exchange password... What kind of account is hotmail exchange? I read the community blog with the same prolEm previously and tried to correct it based on those notes without success! HELP PLEASE! Thanks in advance!
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
Oracle gateway for Oracle 10g DB on Windows 64 bit server
Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.
yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database? -
Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically
Hello,
I am having an issue when I start my TMG 2010 machine:
(*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
The service "Microsoft Forefront Server Protection for Exchange Registration Service"
does not start, it is set to "Manual".
I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
Thanks in advance.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Hi,
Have you received any errors in event logs when
you started the Microsoft Forefront Server Protection for Exchange Registration Service?
Based on my research,
Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
down and does not need to be running for transport scanning to occur.
You can refer to the link below:
Services
Best regards,
Susie -
Mail for Exchange System Error, try again later. F...
my E71 running S60 Mail For Exchange works fine for email, but as soon as we start syncing calendar, we get this error "System Error. Try again later"
i have researched further. The phone log shows the sync falls over on outlook recurring appointments. Some threads suggest the offending appts are those without end dates and adding them will fix it, but this is not correct. Our recurring appointments are created in Maximizer and synced to Outlook. They all have end dates which show in both Maximizer and Outlook.
The log message on phone is: "Failed to store calendar entry in device database". If you google that you come across the link to another thread
/discussions/board/message?board.id=messaging&thread.id=7858
where it seems that MFE simply does not work properly with Outlook calendar recurring appointments and no solution is offered by Nokia. E71's run Symbian S60 and Mail For Exchange is the Nokia offering, which appears to be a derivative of Roadsync. Both appear to have the same shortcoming. Even the latest MFE version, V2.09.158, contains the problem, as we just upgraded on phone to try for a fix.
We have a fleet of E71's, having reverted to Nokia from Win Mobile devices. We were even looking forward to N97's, but we are now planning to move back to a Windows Mobile device. At least we can see the calendar on these!
For now, we have to remove calendar syncing on phone and delete all calendar entries, so the phone again syncs for email and contacts.
Nokia, how about a FIX before your new generation of "Smart Phones" are consigned to the wastebin? Please don't just tell us to change a setting on the server, unless you know it works.
This is your last chance with us. Time is too precious to waste on dodgey software.More info on this - the problem appears to relate to only Outlook 2007 and not XP.
Maybe you are looking for
-
I set up an icloud account using my itunes ID as my icloud user name, and now I have a major problem. My itunes id is six years old, and it's an email address that I just found out is no longer valid (an old netscape address). If someone tries to se
-
How to Setup Windows TFTP Server in Windows 2008 R2
Hi, Can anyone please let me know, how to install TFTP Server in Windows 2008 R2. I installed Windows Deployment Service to get TFTP (got this info in some forum), but I did not see TFTP Service in the Service Manager. I am a newbie so plz let me kno
-
The process to set a Provider Server on ly laptop
Provider name = ????? URL = http://NextLevel-PC:13080/aps/APS Please advise Edited by: Next Level on Nov 29, 2011 9:54 PM
-
Transport Table with Data from Development to Quality
Hi Requirement: Transporting Table with Values from Development to Quality System. I have a Z* - table, appended one field at the end. I need to transport data along with the table structure from Development System to Quality System. In Development S
-
I tried several times to install the PC Suite and Nokia OVI but when installing they have arrested 22 or 17 per cent. I downloaded several times but no facilities still not working. Please help me with your knowledge; Thanks in advance. Attachments: