Link to download sharepoint 2010 sp2 trial

Dear all,
May I know where to download sharepoint 2010 sp2 trial? I can find sharepoint 2010 trial only...
http://www.microsoft.com/en-us/download/details.aspx?id=16631

You need to install SharePoint 2010 first and then the service packLink to Service Pack
http://www.microsoft.com/en-us/download/details.aspx?id=39672
Marek Chmel(MVP SQL Server, MCSE SharePoint 2013, MCT, CCNA,CCDA)
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you.

Similar Messages

Browser based InfoPath Forms in SharePoint 2010 performance has slowed down after SharePoint 2010 SP2

hi All,
Our Browser based Infopath forms have slowed down drastically after applying SharePoint 2010 SP2. Prior to this, we had SharePoint 2010 SP1 and the timings was around 10 seconds (single user) for the entire infopath form to be displayed which has 10-12
views and 5 data connections and 15 business rules and around 100 fields.
But now after applying sharepoint 2010 sp2, the performance has slowed down and it now takes for a single user around 50 seconds.
Refer to the link below, which we followed by applying the patch as well, but the performance is still the same very slow.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0b673324-01c4-49f7-86cb-647aa43fefd6/infopath-browser-forms-extremely-slow-after-service-pack-2-upgrade?forum=sharepointadminprevious
We have raised a ticket with Microsoft, but there is no concrete resolution as to what component of the infopath has made the form rendering and display slow.
Can someone point me to the right resource or knowledge base where i can do a kind of debug, which tells me exactly which infopath dlls are the issue or which part of my form is taking more time. I am using AOLPageTest and Fiddler, but they do not give me
any details where exactly is the bottleneck.
Any tools that give me the details of the bottleneck.
Thanks and appreciate your help in this.
Regards
Ram
Thanks Ram

hi inderjeet,
The application has gone live and its on production, the same application is on pre-prod and UAT, system testing and integration environments.
The infopath form used to work very well on all these environments before we installed sharepoint 2010 sp2. but the moment we installed sharepoint 2010 sp2, the infopath forms have slowed down.
Microsoft has acknowledged that there is an issued with sharepoint 2010 sp2 and infopath form performance, but they are not able to provide an appropriate fix on this.
We have another environment where there is no sharepoint 2010 sp2 applied only sp1 is applied and the infopath form works very well within fraction of seconds.
So your point no. 1 and 2 and 3. does not reveal anything. Fiddler does not give any detailed component by component breakup where the time is taking more.
The form used to work very well before we applied sp2.
I want to know a tool that gives me exactly component by component grant chart kind of breakup of time taken when the infopath url is requested on the browser.
Thanks
ram
Thanks Ram

SharePoint 2010 SP2 hosted on Windows 2012 R2 NOT discovered by SCOM 2012 R2 + 2 SP MP's

What is the process to get SharePoint 2010 Management Packs loaded in System Center 2012 R2 to discover/monitor SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2?
View of installed system:
System Center 2012 R2 loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
-Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007
-System Center 2012 Monitoring Pack for SharePoint 2010
SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
The SharePoint 2010 Management Shell works fine!
Result
Event 0, Operations Manager - Cannot identify which SharePoint farm server is associated with. Check the management pack guide for troubleshooting information.
Looked at these already:
KB2690744, Configuring the SharePoint 2010 Management Pack for System Center Operations Manager.
http://om2012.wordpress.com/2013/05/24/sharepoint-2010-mp-on-scom-2012/
Further, if the xml push does have the command get-farm instead of get-spfarm, that could be the issue. i.e.
http://www.scom2k7.com/advanced-troubleshooting-of-the-sharepoint-2010-mp/
Thanks,
+Tony
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

Peter,
I recommend to remove the Windows 2012 R2 server out of the farm and redeploy on W2008 R2.
This issue does not have an easy fix.
Summarizing, this appears to be the issue:
1. Windows Management Framework 3.0 is integrated with Windows 2012 R2, which installs .NET 4 and Powershell 4.0. Not uninstallable.
2. The Add-PSSnapin Microsoft.SharePoint.PowerShell is not supported with Powershell 4.0.
3. The SCOM SP2010 MP puts a package on the defined farm server and when the agent launches the package, it calls Powershell (v4 in theis case) and errors out. The target W2012 server will have an Error 0 in the Operations Manager Event log. See below.
Options:
1. Work around maybe - Develop method for manual discovery (I'm working on that now).
2. Rebuild SP2010 farm on Windows 2008 R2
3. System Center Team - Write a new MP to down version Powershell (Powershell.exe -Version 2)
4. Powershell Team - Write a SharePoint Snapin for Powershell 4
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

Can someone provide me the link to download CQ 5.5 trial version (developer license)?

Can someone provide me the link to download CQ 5.5 trial version (developer license)?
Thanks,
Sai

I guess You need to have valid account/license for this. Please contact sales reps from Adobe or DayCare to get more information.
http://helpx.adobe.com/wem/support.html
Yogesh
www.wemblog.com

Databases running in compatibility range, upgrade recommended. Sharepoint 2010 SP2 after installing December 2013 CU

I just installed December 2013 CU for Sharepoint 2010 with SP2. I runned the Product Configuration Wizards a couple of time and exexute "PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures".
But still I'm left with one database that is out of date.
The following databases have versions that are older than the current SharePoint software, but are within the backwards compatible range:
Search_Services_Application_DB_0256be25a85b4c3081387181e4a8c6c7.
Do you know what can I try next to fix this?
Thanks!

Hi Steve,
In the Upgrade log what is the error when PSconfig attempts the Upgrade, I am assuming it completes with a warning?
Cheers,
-Ivan

Sharepoint Designer 2010 Workflows Struck in "starting" status after Sharepoint 2010 SP2 upgrade(KB2687453 - June 2013)

We have SPD workflows and Nintex workflows which are configured to start automatically on a Document Library which have content type. After we have been installed KB2687453
(sp2) , all the workfows running on documnet library with content type got strucked and always saying" starting". Please help us.,... highly apprciated as it's urgnet. Thanks in advance.

Hi nart ,
It is a known issue. Please install the June 2013 CU to solve the problem.
June 2013 CU:
http://blogs.technet.com/b/stefan_gossner/archive/2013/06/12/june-2013-cu-for-sharepoint-2010-has-been-released.aspx
For more information, you can refer to the thread:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

Link to download Sybase Unwired Platform Trial

hi experts
I'm trying to use SUP trial, but can not get the link to download (Sybase people I sent him, more than 1 month ago to fill out the form), someone has it?, I need it urgently
regards

The lack of download option, even for client/partners that would like to help SAP sell this product is very surprising and disappointing. I have filled out the form, been in direct contact with local office but the answer I get is that SAP is not giving user a developer/demo download option if SAP consulting is not involved (basically SAP needs to be paid for the trial download). I have heard from some people in the USA having more luck with this process but in the end SAP is going to lose money due to this. If the techies are not able to get their feet wet with the technology then we are not able to sell this from the buttom up, opening up the market for the competitors.
Hope someone from SAP is reading this, they should be on this forum since mobility is such a huge topic at the moment at Sapphire.

Unable to create system performance counter SharePoint Disk-Based Cache - SharePoint 2010 SP2 Farm

Hi,
I'm getting this in my Trace Logs:
Performance Counter OS (pdh) call failed with error code PDH_CSTATUS_BAD_COUNTERNAME
PDH failure on counter <serverName>\Sharepoint Disk-Based Cache\Blob Cache hit ration with Unknown error (0x0000bc0)
Unable to create system performance counter <ServerName>\SharePoint Disk-Based Cache\\Blob Cache fill ratio
Unable to create system performance counter <ServerName>\SharePoint Disk-Based Cache\\Total Blob Size
There are bunch of them from SharePoint Disk-Based Cache counter that its trying to create but they cannot be used.
I've logged on to the server as a farm admin, which has full farm permissions, local admin and runs OWSTIMER.EXE service, but I was not able to add the counters myself. I've read few posts here on TechNet but no one answered on how to enable/recreate these
performance counters. I would like to resolve this if its possible.

I could not find the reason why those SharePoint Performance Counters were not on the WFE servers so I just disabled the "Diagnostic Data Provider: Performance Counters - Web Front Ends" in the Central Admin > Monitoring > Job Definitions.

Issues after sharepoint 2010 sp2 upgrade

Hi,
I am using Lookupset in SSRS report to connect multiple datasets.
=Join(Lookupset(Fields!ows_SNO.Value,Fields!Serial_No.Value,Fields!Name.Value, "Dateset1"))
I have renamed the Title column as serial_No.
When i am opening the report, "Name" is not populated in the report.
Dataset Query:
<ViewFields>
<FieldRef Name="Title" />
<FieldRef Name="Name" />
</ViewFields>
Thank you.

Hi Selvarasu,
Is the Serial_No field is included in the DataSet1?
If not, then you need to change DataSet1 to the dataset where the Serial_No exists.
And for the DataSet query, it is like the format below:
<RSSharePointList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ListName>Test2</ListName>
<ViewFields>
    <FieldRef Name="Title" />
    <FieldRef Name="code" />
    <FieldRef Name="ID" />
</ViewFields>
</RSSharePointList>
If above cannot work, could you please provide more details and screenshots about the datasets?
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Prepare sharepoint 2010 with sp2 environment on windows server 2012 R2

HOw prepare sharepoint 2010 with sp2 environment how i install sharepoint 2010 with sp2 in a windows server 2012
i mean
from scratch i just prepared a windows server 2012 R2 vm
and i set all required roels (Appserver,webserver etc) according to this link
http://social.technet.microsoft.com/wiki/contents/articles/12502.how-to-install-and-configure-windows-server-2012-for-sharepoint-2010.aspx
and i have sharepoint 2010 set up, and i downloaded sharepoint 2010 sp2
from this link
http://www.microsoft.com/en-us/download/details.aspx?id=39672
now should i install sp2 and install sharepoint 2010 binaries?
adil

SharePoint 2010 has no supportability statement for Server 2012 R2. I would not use it until Microsoft releases a supportability statement.
Even it has no supportability for server 2012, but sharepoint 2010 running fine in my server 2012 test environment
adil
You indicated you were using 2012 R2. SharePoint 2010 supports Server 2012 (non-R2) with SP2 media, but has no supportability statement for Server 2012 R2.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2010 trial is not installed in windows 7

I have downloaded Sharepoint 2010 Server Trial from this link
http://www.microsoft.com/en-in/download/details.aspx?id=16631
When i am trying to install after downloading in Windows 7 System, alert message shown as "This product requires windows server 2008 service pack 2 or above"
I found one solution in http://stackoverflow.com/questions/11025716/unable-to-install-sharepoint-2010-in-windows-7
I try that solution installation gets start at the end there is an error in installation when i open the setup log file
MSXML version check passed. Minimum required version is [6.10.1129], installed Version is [6.30.7600.16385].
Showing parent-less message Title: 'Setup Errors', Message: 'Setup is unable to proceed due to the following error(s):
This product requires Windows Server 2008 Service Pack 2 or above.
Correct the issue(s) listed above and re-run setup.'
Message returned: 1
Error: Catalyst boot time check failed Type: 66::PreReqCheckFailure. "
How can i install Sharepoint server in windows 7 please advice. I also tried to install Windows Server 2008 R2 system it algo gets not installing and did not found the MSI log file.
Please try to solve my problem.
Thanks,
Selvakumar.S

You need the Windows 7 pro or enterprise edition. check this
http://social.technet.microsoft.com/Forums/office/en-US/8ab9fbfa-cbda-4631-bba7-86ef3e420e5d/sharepoint-2010-trial-version-installation-on-windows-7?forum=sharepointadminprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Need to Upgrade Sharepoint 2010 to SP2- advise!

Hello All,
I do not work on SharePoint services much, basic operations only. I am entitled to upgrade the SP application and backend SQL in order to make it compatible with our Backup Solution (Symantec Backup Exec 2014).
We got 2 servers, one is running the SharePoint 2010 application (v 14.0.5136.5002), and another is running the MS SQL Server (SQL V10.0.2531.0) for database.
We want to upgrade 1) SP from v 14.0.5136.5002 into Service Pack 2 (14.0.7015.1000)
2) SQL from (SQL V10.0.2531.0) into SP3 (10.0.5500.0).
I am referring to following threads for version sequence and downloads, apparently correct and helpful-
SP: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=224
SQL: http://sqlserverbuilds.blogspot.com/
My question is, 1) while upgrading which one to go first - Sharepoint App server or SQL server? What's the best Sequence?
2) Can I upgrade SP and SQL from current version to the mentioned version, by directly downloading and
installing those versions? Or I have to deploy any hotfixes/patches prior to that release from the current one?
Thanks for any advises.
Insaf Muhammed

HI Muhammad,There is no Sequence for SQL,SP.we can do first SQL and next SP.please find the details below for Sp-Sp2 and SQL.You can find all the latest updates and patches in Cumulative update in post categories.
http://expertsharepoint.blogspot.de/2013/10/detailed-sharepoint-2010-sp2.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
Thank you very much Mr. Anil for the advise and SP link!
Great article for SP SP2 upgrade with screenshots. So as I understand I can go ahead and install SQL SP3 and SP SP2 downloads on top of current releases I have and everything should be OK!
I couldn't see the SQL SP3 deployment part around, could you post if you got one?
Thanks a lot :)
Insaf Muhammed

Windows 2012 to Windows 2012 R2 Inplace with Sharepoint Foundation 2010 SP2 (4.0.7116.5000)

I found than Inplace update from 2012 to 2012 R2 are supported. I also found 2012 R2 will support SharePoint Foudation 2010 with SP2 (4.0.7116.5000).
But I cannot find if we perform an Inplace update from a Windows 2012 Server running SharePoint 2010 (Sp2) to R2 will be successful.
As anyone done that?
Thanks.
Real
Réal Doré

Hi ,
On Windows Server 2012 R2, Microsoft supports only the SharePoint Server 2010 SP2 slipstream media configuration and not the RTM version of that configuration. For full SharePoint functionality and support, you must have the February 2014 cumulative update
(CU) or a later CU installed.
Additionally, only a new SharePoint Server 2010 SP2 slipstream installation that has the February 2014 CU or a later CU installed is supported on Windows Server 2012 R2. Microsoft
does not support a Windows in-place upgrade for this scenario.
For your scenario, I suggest you create a new SharePoint Foundation 2010 with SP2 on Windows Server 2012 R2, then migrate the content to new SharePoint 2010.
More information, please refer to the link:
http://support.microsoft.com/kb/2724471/en-us
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Issues Configure MS SQL 2012 RS (SharePoint Integrated Mode) in SharePoint 2010

Dear All,
Can someone guide how to troubleshoot this error.
Application Server : Slipstreamed Version of SharePoint 2010 SP2 + Window Server 2012 + Configure RS (RS is in SQL Server 2012 SP2) as per -
http://technet.microsoft.com/en-us/library/jj219068.aspx
Web Server : Slipstreamed Version of SharePoint 2010 SP2 + Window Server 2012
Database Server : SQL Server 2012 SP2 + Window Server 2012
After successfully install sharepoint and RS. I have created a Reporting Service Application (name as
Reporting_SA) at Central Admin.
Below is my issues :-
1. Click on "Reporting_SA"
2. Click on System Setting --> getting error
Below are the error that I get from SharePoint Log Files
Name=Request (GET:http://xxxx:xxxx/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=6379172a-da8f-4d7e-9847-1b0e9633064b)
Site=/
WcfSendRequest: RemoteAddress: 'http://xxxxx:32843/6379172ada8f4d7e98471b0e9633064b/ReportingWebService.svc' Channel: 'Microsoft.ReportingServices.ServiceContract.IReportServiceManagement' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetSystemProperties'
MessageId: 'urn:uuid:0accea23-5b1f-40fa-9412-c8263a601520'
WcfReceiveRequest: LocalAddress: 'http://xxxx.xxx.org:32843/6379172ada8f4d7e98471b0e9633064b/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetSystemProperties'
MessageId: 'urn:uuid:0accea23-5b1f-40fa-9412-c8263a601520'
Entering monitored scope (ExecuteWcfServerOperation)
Event log source SQL Server Reporting Services Shared Service does not exist
Throwing Microsoft.ReportingServices.Diagnostics.Utilities.EventLogSourceNotFound: , Microsoft.ReportingServices.Diagnostics.Utilities.EventLogSourceNotFound:
The event source "SQL Server Reporting Services Shared Service" does not exist.;
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=1.1902
System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.   Server stack trace:
    at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
    at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
    at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
    at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
    at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.GetSystemProperties()
    at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
    at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
    at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
    at System.Web.UI.Control.InitRecursive(Control namingContainer)
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Leaving Monitored Scope (Request (GET:http://xxxx:xxxx/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=6379172a-da8f-4d7e-9847-1b0e9633064b)). Execution Time=191.9647
Noted : I have try to re-install the Reporting Services, but stilling getting same error.
Thanks.

Hi StarMoonEarth,
According to your description, when you click on the System Setting, it throws error message says "SQL Server Reporting Services Shared Service does not exist". Right?
In this scenario, you can check if the Reporting Services is started. Follow the steps below:
In SharePoint Central Administration, click Manage Services on Server in the
System Settings group.
Find SQL Server Reporting Services Service and click Start in the Action column.
The status of the Reporting Services service will change from Stopped to
Started. If the Reporting Services service is not in the list, use PowerShell to install the service.
If the Reporting Services shared is still not existing, please use PowerShell cmdlts to install the Reporting Services service. Please refer to the Section 2 in the link you have posted.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SharePoint 2010 and PowerPoint 2010: Open PPTX File in Edit Mode and Open PPSX in in Slide Show Mode

I have the following issue while opening PowerPoint PPTX file and PPSX from the Document ID link provided by SharePoint 2010.
Issue
Initially when I opened PPTX file from the DOC ID link from SharePoint 2010, it is opening up in Slide Show mode which is not how we want it to be.
For PPSX, it is opening in Slide Show mode which is what we wanted.
Thus, I did some research online and found this article at support.microsoft.com/kb/q299824 which requires some modification to the Registry of the client machine.
I did the change as follows
Open Registry
Look for “Computer\HKEY_CLASSES_ROOT\PowerPoint.Show.12”
Set BrowserFlags value to a
After the change, PPTX is opening in Edit Mode in PowerPoint which is correct but PPSX is also opening in Edit Mode in PowerPoint which is not correct
This issue only occurs if I open the document from the Doc ID link in SharePoint. If the documents are downloaded, it will not have this issue.
Questions
Can I set PPTX to open in Edit Mode and PPSX to open in Browser Mode?
Is this fixed as in if I change the registry setting it will affect both file types?
Is there other ways I can achieve opening PPTX in Edit and PPSX in Browser Mode?
[Environment]
My Client machine is running on I.E 9 and Office 2010.
Thank you.

Hi,
To make the PPTX file open in Edit mode and PPSX file open in Slide Show mode, I recommend to edit the registry key HKEY_CLASSES_ROOT\PowerPoint.Show.12 to 8.
I tested the scenario in my environment with changing the key value to 8, after that PPTX file opened in Edit mode and PPSX file opened in Slide Show mode.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Link to download sharepoint 2010 sp2 trial

Similar Messages

Maybe you are looking for