Link to download the server 2008 r2 enterprise without service pack

Hi,
Please provide the link to download the server 2008 r2 enterprise without service pack
Thank You!!

Hi,
Please check the below download links:
Windows Server 2008 R2 Enterprise Edition x64 (Full Install) VHD
http://www.microsoft.com/en-us/download/details.aspx?id=2227
Windows Server 2008 R2 Enterprise Edition x64 (Core Install) VHD
http://www.microsoft.com/en-in/download/details.aspx?id=18348
Windows Server 2008 R2 Evaluation (180 days)
http://www.microsoft.com/en-in/download/details.aspx?id=11093
And we could refer to the download center for more information:
download Center
http://www.microsoft.com/en-us/download/default.aspx
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

HUM 1.2 server 2008 R2 Enterprise

Hi.
Could hum 1.2 be installed on Server Windows 2008 R2 Enterprise?

No, the following is supported:
The following Windows systems are supported in LMS 3.2:
•Windows Server 2003 Standard Edition
•Windows Server 2003 Enterprise Edition
•Windows Server 2003 R2 Standard Edition
•Windows Server 2003 R2 Enterprise Edition
•Windows Server 2003 Standard Edition with Service Pack 1 and 2
•Windows Server 2003 Enterprise Edition with Service Pack 1 and 2
•Windows Server 2003 R2 Standard Edition with Service Pack 1 and 2
•Windows Server 2003 R2 Enterprise Edition with Service Pack 1 and 2
•Windows Server 2008 Standard Edition with Service Pack 1 and 2
•Windows Server 2008 Enterprise Edition with Service Pack 1 and 2
Both 32 bit and 64 bit Operating Systems are supported on the above versions.
CiscoWorks LAN Management Solution 3.2 supports only the following locales:
•US-English
•Japanese
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1099303

ACS 4.2 Remote agent with WIN server 2008 core Enterprise 64-bit

I need help to clarify if Cisco ACS 4.2 does support remote agent on Win server 2008 core enterprise 64-bit?? if not supported; is there any work-around solution for this?

Hi,
As per the release notes it does support.
Windows 64-bit Support for Remote Agent:-
ACS 4.2.1 Remote Agent is supported on the following Windows 64-bit OS:
•Windows Server 2008, Standard Edition with Service Pack 2
•Windows Server 2008, Enterprise Edition with Service Pack 2
•Windows Server 2003, R2, Standard Edition with Service Pack 2
•Windows Server 2003, R2, Enterprise Edition with Service Pack 2
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html#wp1050574
thanks,
Vinay

Does the lnkfix_vista.zip work for window server 2008 R2 enterprise ?

All icons on my exchange 2010 server show as .lnk, any icon I click on starts notepad... does the lnkfix_vista.zip work on Windows server 2008 R2 enterprise ?
thank you.

This issue because there is no SPN for the Front End pool FQDN. Rather than adding an SPN I just deleted my front end server from the topology builder and added a new one using the FQDN of the actual lync server and it worked fine.
Also you can refer below link
http://howexchangeworks.com/2013/07/creating-central-management-store-fails-while-publishing-lync-2013-topology.html
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

Error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" on SQL Server 2008 R2 Enterprise Edition 64-bit SP2 clustered instance

Hi there,
I have a Windows 2008 R2 Enterprise x64 SP2 cluster which has 2 SQL Server 2008 R2 Enterprise Edition x64 SP2
instances.
A domain account "Domain\Login" is administrator on both physcial nodes and "sysadmin" on both SQL Server instances.
Currently both instances are running on same node.
While logging on to SQL Server instance 2 thru "Domain\Login" using "IP2,port2", I get error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication". This happened in the past
as well but issue resolved post insatllation of SQL Server 2008R2 SP2. This has re-occurred now. But it connects using 'SQLVirtual2\Instance2' without issue.
Same login with same rights is able to access Instance 1 on both 'SQLVirtual1\Instance1' and "IP1,port1" without any issue.
Please help resolve the issue.
Thanks,
AY

Hello,
I Confirm that I encountred the same problem when the first domain controller was dow !!
During a restarting of the first domain controller, i tried to failover my SQL Server instance to a second node, after that I will be able to authenticate SQL Server Login but Windows Login returns Error 18452 !
When the firts DC restart finishied restarting every thing was Ok !
The Question here : Why the cluster instance does'nt used the second DC ???
Best Regards
J.K

Error the service FWSRV of TMG 2010 on Windows server 2008 R2 Enterprise

Please help me about a issue of TMG 2010:
My company installed TMG 2010 on Windows server 2008 R2 Enterprise but it happen error " Due to an unexpected error, the service fwsrv stopped responding to all requests. Stop the service or the corresponding process if it does not respond, and
then start it again. Check for related error messages."
and " The Firewall service stopped because an application filter module C:\Windows\SYSTEM32\ntdll.dll generated an exception code C0000005 in address 0000000077A72F86 when function CompleteAsyncIO was called. To resolve this error, remove recently
installed application filters and restart the service."
I have reinstall but there error also appear again. My company use about 2000 clients access through TMG 2010.
i have try update windows and TMG latest but can not solved this issue.
i hope everyone help me as soon as. thank you so much.

HI Luis,
Not sure whether this will fix your issues however give it a try and let us know so that other can also provide suggestion.
Disable
Antivirus
Monitoring Tools / Hardware Diagnostics tools which comes with Server vendor
Try -
http://support.microsoft.com/kb/2649961
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2649961&kbln=en-us
Ensure you have enough space for Log to be stored

Where to download SQL Server 2008 R2

We have a license for SQL Server 2008 R2 Enterprise, but lost the installation disk. We are moving to a new updated server. Where can I download the software? Can only find links for 2014 now.
Thanks.

Hello,
You can still download evaluation edition from the following URL.
http://sqlserver.dlservice.microsoft.com/download/9/C/0/9C036510-3218-4258-8B03-67DC1D6A497C/SQLFULL_ENU.iso?lcid=1033
Then provide the key you have on the Product Key page of SQL Server setup.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
Thanks

Hi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

How to enable javascript in windows server 2008 R2 enterprise ?

Hi all,
Hope doing well,
sir i am using windows server 2008 R2 enterprise operating system.
i am running my web application in localhost. it's working fine.
but i have used timer using javascript and some javascript function that is not working in this application.
i googled many thing and i got one solution that is http://njbblog.blogspot.in/2010/02/issue-windows-server-2008-javascript.html
i went through this link and i have done the solution but in my another system has the same configuration and same thing i am doing there but it's not
enabled javascript and my application is not working.
plz help me. it's urgent
waiting for reply.
thanks in advance.
vicky Bangalore

Hi Vicky,
Please make sure that the Javascript is enabled on you IE.
To do this, please go to Control Panel->Internet
Options, click on security tab,
click on customer level button. Please scroll
down to Scripting, underScripting
of Java applets, click enable.
OR
Please try to start the Internet Explorer with option "Run as Administrator" to see whether it works.
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Server 2008 R2 Enterprise - 1 Virtual Disk - Using UEFI - 4.5 TB available - Why 2 Disk 0 - Unallocated space entries?

Hello everyone,
I'm building a new Dell R720 server. It has a RAID 5 - 6 x 1TB array.
I am attempting to install Server 2008 R2 Enterprise. I used the build disc supplied by Dell.
The BIOS is UEFI configured.
When I launch installation of Server 2008 R2 Enterprise in the storage area it shows:
Disk 0 Unallocated Space - 2048GB Total Size - Free Space 2048GB
Disk 0 Unallocated Space - 2607GB Total Size - Free Space 2607GB
I would like it to show:
Disk 0 Unallocated Space - 4655GB Total Size - Free Space 4655GB
I want to partition 1 600GB partition for the OS and the rest for storage of Hyper-V VM's.
I understand using GPT to format the volume. But I haven't even allocated anything yet and it is showing 1 virtual drive as 2 entries....
I tried to find a simple answer for what is going on here but I don't really have a lot of time to do hours of research. Just a basic answer would be good if anyone has one. I don't see an initialize option in the RAID controller itself that is of much
help. Maybe someone has configured an R720 and has an answer already for this? It would be appreciated! We litterally need the full amount of storage allocated for the storage of the VM's as they are huge files being moved from an existing failing Hyper-V
server.
Thanks!

So the answer for this; was after contacting Dell the newer generation Dell servers need to be booted up through the lifecycle controller (F10) > UEFI has to be explicitly chosen (Most of the Dell build discs are configured as MBR) and once the Lifecycle
Wizard for OS deployment is completed Windows will detect the total amount of available space correctly. The older Dell models you have to download the Build Utility that is capable of GPT / UEFI configuration.
Just incase anyone else runs into this it is not a Microsoft problem at all.

Dump of SQL Server 2008 R2 Enterprise

Hi,
How can I download the Dump of SQL Server 2008 R2 Enterprise Edition? I have the License Details. But I missed the CDs. Could you please help for the Dump collection?
! ! Thank You Very much ! !
Best Regards
+91 9871843884

How can I download the Dump of SQL Server 2008 R2 Enterprise Edition? I have the License Details. But I missed the CDs. Could you please help for the Dump collection?
Hi,
If you have license key with yourself. You can download SQL Server 2008 R2 Evaluation edition. When you are installing SQL Server eval edition on license key page you would have option to select free edition or provide License key for Enterprise edition.
Provide License key and it would be enterprise edition after your installation finishes
PS: if above does not helps please speak to MS personal
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Problems LMS-4.2 Installation on Windows Server 2008 R2 Enterprise SP1

Hi all,
During the installation of the LMS-4.2,
It passed the "Initializing" and "Copying" stages,
but, in the "Configuring", it never finishes,
Anyone had have a similar problem?
the installer is for - LMS-4.2 and the OS is Windows Server 2008 R2 Enterprise SP1

Thanks for the update. Glad to know it has installed now.
There can be some port clashes and resource scarcity when other applications may be using it. Hence we recommend to have majorly LMS as the primary software on the server's.
Also, LMS is not supported in other languages installers or setups except English and Japanese.
There are a couple more things you can do/check prior to running the installation.
LMS generally need Naming convention to handle long names/path etc. By default C: has 8.3 Naming convention enabled. However if you installed on different drive (for eg E:), for which this may be disabled.
To check naming convention you can run the following command from Windows Command prompt:
cmd>fsutil.exe 8dot3name query <Drive>
Example:
C:\Users\winlau>fsutil 8dot3name query C:
The volume state for Disable8dot3 is 0 (8dot3 name creation is enabled).
The registry state of NtfsDisable8dot3NameCreation is 2, the default (Volume level setting).
Based on the above two settings, 8dot3 name creation is enabled on C:.
8dot3 needs to be enabled for all drives LMS will potentially use, including:
Drive where TEMP/TMP is located
The drive LMS is installed to
The drive LMS backs up to
Drive used for a relocated RME Shadow directory or other nonstandard paths written to.
In some cases, altering the TEMP and TMP variables to be a short path (eg C:/temp or C:/tmp) may avoid the issue, but not always.
Hence, to be safe, it is best to enable 8dot3name creation globally, either via the registry or Windows CLI
Sample command to enable globally:
"fsutil 8dot3name set 0"
Sample command to enable on one volume:
"fsutil 8dot3name set X: 0"
Note that this needs a reboot to take effect. You should not disable 8dot3name creation which already has it enabled, especially the system volume (usually C:).
For further information http://technet.microsoft.com/en-us/library/cc778996%28v=ws.10%29.aspx
-Thanks
Vinod
**Encourage Contributors. RATE them**

MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition

Hello Team,
Is there any issue/conflicts/limitationn to install MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition.
OR their is nothing to worry about it I guess their is memory limitation between both of them. Please suggest
Regards
Naveed Amir

Hi,
Here you can find the officially Hardware and Software Requirements for SQL Server 2008 R2:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
There should be NO problem as much as I know if the basic limitation fit you (as shanky mentioned).
I had (an clients still have) several servers with Windows Server 2008 R2 Standard & SQL
Server 2008 R2 Enterprise and Standard with no problem (today I have one old developing server with this exact installations work great for several years).
[Personal Site] [Blog] [Facebook]

Attempted to perform an unauthorized operation error while installing SQL Server 2008 R2 Enterprise edition on Windows Server 2012 R2 standard VM server

I've been trying fresh installation of SQL Server 2008 R2 enterprise on Windows Server 2012 R2 standard VM server several times for two weeks, but always get the error "Attempted to perform an unauthorized operation". At first, I attempted
to install all features, but failed several times. So I decided to try install just Database Engine service, and still fail at the SqlBrowserConfigAction_Install_ConfigNonRC_Cpu32, with the error "Attempted to perform an unauthorized operation".
I remote login to server with my admin domain account. This account is in server local Administrators group. I
1. Right-click on setup.exe file | properties | Compatibility tab | select compatibility to Windows 8.Then click OK.
2. Right-click on setup.exe file | Run as Administrator, to start the Installation Center.
I have the document of my installation steps and zip file of the installation logs, if you need to take a look.
Appreciate for any help!
ntth

Hi ntth,
"Attempted to perform an unauthorized operation"
The above error is always related to the Windows account SID mapping. I recommend you login into Windows using another Windows account which has administrative privileges and run SQL Server setup using that Windows account.
Besides, please note that we need to apply SQL Server 2008 R2 Service Pack 2 or a later update when installing SQL Server Windows Server 2012 R2. For more information, please review this
KB article.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Link to download the server 2008 r2 enterprise without service pack

Similar Messages

Maybe you are looking for