Link to FM ToC and MIX not made

I have the TCS2 and Windows 7 64-bit
From RH, when I open a new blank project and then link to a FM book, the ToC and MIX of the book are completely ignored. And it is impossible to add to a project an FM ToC and MIX.
When I start a new project by importing FM book, the ToC and MIX chapter are correctly imported. But in this case there are not link with FM....
What to do ???

Problem is now resolved

Similar Messages

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

Acrobat 9 Pro: Links to Word TOC and cross references are lost

I'm testing Acrobat 9 Pro and while it successfully creates a PDF from Word 2003 with bookmarks, all my TOC and internal page reference links are lost.
I have triple checked the conversion settings from the Adobe PDF menu option in Word, and the "Convert cross-references and table of contents to links" check box is definitely selected.
I used the same Word document on another machine with Acrobat 6 Pro installed - and the TOC and cross ref links were created successfully. As far as I can see the Adobe PDF settings in Word 2003 on both machines are the same - the only difference is that one uses Acrobat 6 Pro and the other uses Acrobat 9 Pro.
The only setting in 9 Pro I turned off was the 'enable accessibility tagging' one; it's also turned off in 6 Pro. The remaining settings are the default.
A clickable TOC and internal links is essential for my clients who often have 400+ page documents.
Anybody have any suggestions? Or can anybody confirm that they do/don't get the same behavior in Acrobat 9 Pro?

Thanks Abhigyan - your test PDF worked fine for me.
This is what I've done today:
1. Checked for all instances of pdfm*.dot files and removed any that were lurking in old Application Data and Microsoft Office folders.
2. Deleted all Acrobat 5 and 6 folders and subfolders still lurking in Program Files.
3. Used Add/Remove to delete Adobe Reader 8 and its updates. I figure I can always install Reader 9 if I need it as a separate app.
4. Checked that everything was gone using the Windows Installer CleanUp utility (it was).
5. Restarted my machine.
6. Turned off my anti-virus software.
7. Did a search for any pdfm*.dot files - found one only in the current Microsoft Office folder and left it there.
8. Reinstalled Acrobat 9 Professional.
9. Opened my test Word 2003 document.
10. Checked all the Acrobat conversion settings and left them as the defaults.
11. Converted the doc to PDF and checked for internal links. Yes! The TOC links worked! But my joy was short-lived as the page link didn't work...
12. Tried various other conversion settings based on some suggestions from Lance in first level Adobe Support yesterday - still no page link. And I also lost the TOC links when I cleared the Enable Accessibility check box on the Settings tab of the conversion settings.
13. Checked the Edit > Preferences > Convert To PDF settings for Word in Acrobat 9 - add bookmarks and add links are both selected (default).
14. Used Acrobat 9 to create the PDF (File > Create > From File) hoping that this might might a difference. Nope. No TOC or page links.
15. Changed conversion settings back to default via Word 2003, and created a PDF from a longer document. Again the TOC links worked, the URLs worked (they always did), the bookmarks worked (they always did too), but the none of the internal page cross-reference links worked.
So my summary is this:
* I can only create TOC links *if* Enable Accessibility is turned on, but I have always turned this off in earlier versions of Acrobat as I don't need it and it made the process of creating a PDF from a long document incredibly slow - I'm wary of using it!
* I cannot get internal page links to work at all, no matter which method I use to create the PDF (from within Word or within Acrobat), and no matter which conversion settings I select.
I really don't know what to try next. Manually creating links for what could be hundreds of cross-references in a single document is NOT an option, especially as I have many of these long documents.
Any further suggestions?

TOC and footers not generating correctly in printed output

I'm using RH8. Up until yesterday, was able to generate .doc output just fine. We usually run a macro to clean up the TOC and footers. Yesterday I had to update an older help file created in RH4W. I made my changes, closed RH4W and resumed working in RH8. My .chms generate fine. It's my hardcopy .doc file that results in no TOC or footer creation.
Here's what the TOC and one of the footers looks like. If anyone can offer any suggestions (I'm at a loss - even deleted the ssl and started from scratch), I'd appreciate it.

The problem is in your Word settings, not RoboHelp. Looks like you have Word set to show field codes.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Webhelp TOC and Contents not displayed in Google Chrome

Hello All,
I recently tried to view webhelp (generated using Robohelp 7.0) in Google chrome. But chrome displays only the first topic of the web help and does not display the TOC of the help. Can any one please help me in why this is happening.
PS: I am viewing the online help from a server and not from local folder. When viewed from within local folder it doesn't display any info.
Rithesh

Hi,
See snippet 103 and snippet 130 on Peter's site: http://www.grainge.org/pages/snippets/snippets.htm
Greet,
Willam

RH7 HTML and IE11/TOC and search not appearing, apply RH10 fix?

Hi, thanks for taking my question. In IE11, in online help created using RH7 HTML, the TOC and Search don't appear, an issue that I know has appeared on the forum before. From a search on this forum, I see that a fix applies to RH10. (Sorry, I downloaded the files, but now can't find the post with the fix. Zip is IE11Fix_RH10.zip.) Will that fix work backwards to RH 7? Or is RH 7 completely incompatible with IIE11?
Apologies if this has been answered.

That fix is not backwards compatible. I'm afraid that IE 11 is not supported for RH7. I have backported a solution to RH9, but RH7 is just too old with too many issues to even try a fix.
The best solution would be to upgrade.
Kind regards,
Willam

Download links for beta releases and release notes

All
Where is the download links for all the beta-release packages and their release notes?

Thanks. So loading B19 the CSS on TableHeaders is showing White Bold for me. Using the following CSS before
.table-view .column-header .label {
     -fx-text-fill: #f1f3f2;
     -fx-font: 11pt "Century Gothic";
/** this is for the the last cell in the column-header so should essentially be the same styling as column-header* */
.table-view .column-header-background {
     -fx-background-color: linear (0px,0px) to (0px,8px) stops (100%, rgb(127,127,127)) (10%, rgb(89,89,89));
     -fx-font: 10pt "Century Gothic";
     -fx-text-fill: #f1f3f2;
     -fx-font-weight: bold;
     -fx-border-color: #F1F1F1;
     -fx-border-weight: 1px;
Is there a CSS change List?

Dynamic Link between Premire Pro and AE not working

I've been having this issue where dynamic link is grayed out in the Premiere Pro menu, when i try to link a clip to AE. It's the same the other way round (i.e. AE to Premiere), and also the "Replace with After Effects Comp" is grayed out as well. Im using the CC version (Not CC 2014), so it should work?
Thanks for your help!

Hi Kevin,
Thanks for your reply. I'm using CS6 (if that's what you mean by version - otherwise I think it's 7.0). I've never come across verifying the programs, how do I go about it?
Thanks

Link to desktop software and update not found

I have been trying to update mt curve 8300 and when I try and download the file I get a file not found. I have ATT. Someone please help.

1. Desktop Manager 4.6.0 B16 Multilanguage - With Media Manager... Download Software, save to desktop. install to PC.
2. BlackBerry Handheld Software v4.5.0.152 (Multilanguage) for 8300 smartphone... Download Software, save to desktop. install to PC(Desktop Manager must be closed.
3. Open Desktop Manager, plug in device, select UPDATE.

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2. need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?

Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

Link between Invoice and Delivery note

Hi,
Here I am having a requirement to get all the GR made against an Invoice.
Let me explain it.
I am having one Purchase order. Now I made the GR with a delivery note number. Now in MIRO I pass the bill or create the Invoice against the delivery note. Now I want to know the delivery note number against that invoice number.
I cant go by the Purchase order no and item number also. Because I have to show the delivery note number against that Invoice number only. Because so many Invoices and GR can be created for the same PO item.
FYR please go through the my thread in ABAP general
[Link between the Invoice and material document;
Regards
Shiba Prasad Dutta

Hi Experts,
I also need help on this issue. I have a PO with several GRN per item. Also, I already have some invoices registered ate MIGO.
On EKBE table, per PO, per item, i can check how many GRN I have (VGABE=1) and how many Invoices do I have (VGABE=2) regarding that item of the PO.
What I need to konw is how can I link the Invoice to the PO.
Example: EKBE table
PO ITEM VGABE Material DOC Number
A    10        1                   100
A    10        1                   200
A    10        2                   300
I can I know, in terms of tables and fields linkage, to what GRN does Invoice 300 links to?
Many thanks.
Joana Faria

I just had to have my toshiba laptop hard drive replaced and I am unable to move my itunes library from my ipad back to the laptop. It says it is linked to another library and I can only transfer purchased music etc and not the rest of the library.Help!

I have just had my Toshiba laptop hard drive replaced. This has resulted in all previous content held on the laptop to be lost. I wanted to try and transfer my music library from my ipad to the laptop, but it will not allow me to do so. The message is that the ipad is linked to another computer and it will only allow the transfer of the items purchased on through the ipad and nothing else. Does anyone know if the full library can be transferred back to the computer?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

After upgrading from Vista to Windows 7, Firefox lost all my stored passwords, never asks to save them, even though I've checked box for saving them, have made sure history is not cleared, and am not in Private Browsing.

In Windows 7, Firefox 8.0 does not ask to save passwords, and does not save, them, even though I checked the box to save passwords. I have confirmed that clearing history is not on and that I am not in Private Browsing. This is so frustrating, it almost makes me want to go back to Vista. I have looked at all the suggestions to fix the problem in "Help" and have followed the suggestions, and none of them help.

I have the TX2 1012NR and its can upgrade just fine! Here is a few recommendations "only if u have the HP Upgrade program disks"
If you have them you can install a clean copy and delete everything... Do not use the use me first disk included because it prompts you to install an older BIOS.... Just use the windows 7 upgrade disk and start the process. The clean install clears your entire drive but does not void your warranty! When you use the use me first disk after the install it actually loads everything else needed to get you up in running. The touchscreen driver and the HP Mediasmart programs will have to be downloaded from the HP support site. Once again its recommended that if there were any programs installed delete them do not try to update them! This causes issues and countless errors. Specifically with touchscreen drivers etc uninstall them before installing the ones from HP support. I found this was not the easy way to do it but the best way... I also recommend that when doing any sort of BIOS update that you remove your Battery and leave it connected to a power cord only! Last but not least if you really mess up and its under warranty... Send it to HP they will set it back up to factory defaults under Windows Vista with the more up to date BIOS installed. I hope my information helps! Sure you might loose some programs but in the end your computer runs faster and smoother because all the programs installed are made for Windows 7.... Also they did release the Touch Pack for download from the Microsoft website here is a link telling more about the features and benefits and how to get it as it is a totally free download...
http://windowsteamblog.com/windows/b/windows7/archive/2009/05/27/introducing-the-microsoft-touch-pac...
Microsoft Link for download:
http://www.microsoft.com/downloads/details.aspx?FamilyID=b152fadd-82e4-4ddb-a46a-aebe49944428&displa...

TOC link with a subscript character does not work in PDF

Hi,
has anyone come across with this? A heading has a subscript character and when you generate a PDF, the TOC page has no link. Other TOC heading links work out just fine, but all these that have subscript, these do not.
I have used Save As PDF and selected even create named destinations for all Paragraphs. Usually the TOC works fine even if that is not selected. A link with subscript does not work in either case.
I appreciate any help with this, thanks

> The link is always terminated before any change in the character format. That's not a bug.
In user-authored manually-created hypertext links, sure. And in that case, we know that we have to re-apply the Marker to the various fragments of the desired text. I would not expect this behavior for a generated file where we have limited control over the auto-tagging.
> Therefore if you have subscript or superscript applied, the link starts at the beginning of the paragraph and ends before the character format change (sub-/superscript).
It's not just format changes in body <$paratext> that break this. If you so much as apply a different format to the elements on the TOC Reference Page TOC (such as making the page number a different font), that breaks the HT of the page number in the PDF.
> As far as I know Rick Quatro offers a FrameScript script for this problem.
Well, Adobe might consider this to be an Enhancement Request item, but I consider it to be a defect.
Is there anyone who would object if the TOC entries had functional full-string HT links by default? If so, Adobe could fix the problem, and have an Update tickbox to revert to legacy broken behavior.
In any case, the Unicode solution is not really a "work-around", even though I put it that way. For anything where Unicode has a glyph that you would otherwise implement as FrameRoman with a Character Format, use Unicode.

Link to FM ToC and MIX not made

Similar Messages

Maybe you are looking for