Link to know the customer Commercial details in portal

Hi ,
One of our customer had paid AMC directly to SAP now they want to know the contractual information and commercial details if anyone of you could provide us the link from where it could be checked.
Thanks & Regards-
Mona.

Hi Mona,
All detail should be in your PO when you or your company finalized the agreement.SAP cant disclose the amount on web coz it could be very customer to customer.
thanks
Deepak Tyagi

Similar Messages

I need to know the Sales to detail

hi..
I need to know the Sales to detail, where one is the fields of dates, material, branch, amount, net value, etc
Mike

I need to know what is the table where the sales to detail are registered.
Mike

Anyone know the customer support phone number for eastern standard time

anyone know the customer support phone number for eastern standard time?

telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Anybody know the Executive Contact Details? Absolu...

Right I have tried serveral times contacting Nokia Customer Support by Email and Phone. On the email I made my point clear about why the Nokia N86 8MP maintenance release firmware (20.115) was allowed to be put on FOTA and even after its release on FOTA it got put on to the Nokia Software Updater, which is ridicolous as the firmware is totally unstable, its like as it was before Production Level so buggy. I even clearly stated there is no use in sending the phone off to repair like you always copy and paste the email instructing the phone to be sent to Nokia Care Centre which it does not need to as the latest firmware has been applied to the N86 and I have done numerous factory reset and stuff. I clearly asked for the Executive Director Details. I sent the email's like nearly two weeks ago and I have not received no reply in my inbox. I also contact Nokia Customer Service several times explaining this problem and the Nokia Customer Service did not even have a clue. I asked for the Nokia Exeuctibe details and everytime I asked that they go we putting you through, and guess were the call gets diverted to ? The Nokia Repair Centre (Annovo) in Theftord. What a waste of time and my breathe for a company like this which treats its customers like DIRT. The customer service rep told me to go to www.europe.nokia.com and check for software updates when latest version will be releasing. I clearly told him I ain't dumb and Nokia never release details on what firmware is going to be releasing and the dates. I told him you trying to get rid of me and dont take me for a mug and I asked him for Manager or Executive Details, and guess what after holding on the line it gets cut off!
I have sent all the details and video recording of the bugs on the N86 8MP to BBC Watchdog.
If i was given the chance to interview the Executive Director I would get my point across to him with this situation and for those who have problems with the lack of software updates for N97. These big time idiots just hide behind carpets and the employees at customer service as no better than monkeys. I wouldnt know what to class the customer service as, but all I can say apes can do better job than them. All lof of them are just useless sitting on the chair and talking **bleep**.
If you find my post useful then click on
Kudos!Nokia N86 8MP (v20.115 / RM-484)
Symbian-Master

metalfan wrote:
Customer service staff at NCC's are not their to detail to you faults and how to fix them, they're there to help you book your phone in, explain the processes it goes through etc etc.
They aren't trained to diagnose your problem nor trained to fix it.
Perhaps your exact unit is faulty. How do you know that it's "faulty" firmware? Have you tried other peoples phones?
Call the careline if you want to talk to Nokia.
My phone is not even faulty. Look at the other thread, I have those problems what they have so if its happening to majority of us does that mean everyones n86 is faulty those with v20.115?
Thread:
/discussions/board/message?board.id=swupdate&thread.id=58007
Well I clearly asked for a manger/supervisior to talk to and yet they put me through to somewhere else, and even better fast one they do is cut the line off. Nokia customer service should do magic tricks instead, becuase that what there good at.
Message Edited by mo_shef on 23-Oct-2009 03:11 AM
If you find my post useful then click on
Kudos!Nokia N86 8MP (v20.115 / RM-484)
Symbian-Master

How to fetch the customer contact details like phoneno,fax_no

Hi All,
i am knew to Apps .here i need to extract the details from database to text file.in my query i have a problem to get the details about customer contact_no like phone_no,fax_no,contact_person_name(first,last).anyone can help in this case.thank you in advance
Akepati

Hi,
you can get these information from Hz_Contact_points table. This table stores the phone,fax, email details about the contact of a party.
Join Condition between Hz_Contact_Points and Hz_parties is Owner_table_id where Owner_table_name ='HZ_PARTIES', owner_table_id is the party_id of Hz_parties.
I hope this helps
Regards,
Dinesh

To display the opening balances of the customer in detail and A/R invoice open status document

hi every one
i want a report
for the below code i am getting only the documents that are posted from 01/04/2014. But for some customers and vendors i have entered opening balances using J/E so in this report i want to display the detailed split of the BP Account Balance which i have entered in J/E
SELECT
T0.[CardName][Customer Name],
T0.[DocNum][Document Number],
T0.[DocStatus][Status],
T0.[DocDate][PostingDate],
T0.[DocDueDate][DueDate],
T0.[DocTotal][Total],
t1.SlpName,
DATEDIFF(DAY, T0.DocDueDate, GETDATE( )) AS 'Days Over Due'
FROM dbo.OINV T0 INNER JOIN OSLP T1 ON T0.[SlpCode] = T1.[SlpCode]
WHERE DocStatus = 'o'

I'm not sure if this will work but you can have a try good luck
select TOP 100 convert(nvarchar(10),j.refdate,101) [Posting Date] ,(case j.transtype when 24 then 'RC' when 13 then 'IN' when 14 then 'CN' when 30 then 'JE' when 321 then 'JR' else j.transtype end) Origin ,convert(nvarchar(max),j.baseref) [Origin No.] ,j.contraAct [Offset Account] ,convert(nvarchar(max),j.LineMemo) [Details] ,OJ.loctotal [C/D(LC)] ,(j.BalDueDeb - j.BalDueCred) [Balance Due(LC)]
,'' [C/D(FC)]
,'' [Balance Due(FC)]
,j.Debit [Debit(LC)]
,j.Credit [Credit(LC)]
FROM jdt1 j
left join ORCT R on j.baseref = R.docnum
left join OINV I on j.baseref = I.docnum
left join ORIN C on j.baseref = C.docnum
left join OJDT OJ on j.transid = OJ.transid
where j.shortname in (Select CardCode FROM OCRD) and i.DocStatus = 'O'
order by j.transid DESC
Note: you can removed the TOP 100 to show all the transactions.
to show only the invoice transaction you may want to add the filtering for J.TransType = 13
Regards,
Jim

Finding field KNA1_OIDRC in ECC6 / ERP2005 on the Customer Master details

Hi to all SAP Gurus
Could someone kindly advice how to find screen field "Diff.Ref.Co"/ Mag Area(KNA1_OIDRC) in the ECC6 environment. in the previous release of SAP 4.6C it was situated on General data in the Control Data tab. I have found SAP Note 973001 but this has not solved our problem. i have also checked in configuration to make sure the screen is a required entry.
Thanks
Phenyo

Hi,
Verify if
1. In SAPLOI0_MF02D and screen number 7123, the attributes of the field Diff. ref. code (KNA1-OIDRC). is 084.
2. Table TMODP has ONLY this entry
E T077D-FAUSA 084 Differential Reference Code
3. Check customizing in OB20 and also in SPRO -> Logistics-General -> Business Partner -> Customers-> Control -> Define Account Groups and Field Selection for Customers
Best Regards,
Hema

Want to know the complete hardware details of presario c700

can some one tell me hind out what is all in side my compa prsiaro c700
runs widows vist

Hi,
C700 series has many models, please look in this manual:
http://www.hp.com/ctg/Manual/c01301275.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to know the customer item in Basket in Adventure Works sample db

Dear all,
In AW sample DB there is a ShopingCartItem table where user can place product they want to buy.
In from that ShopingCardItem there seems to be no information a USer ID which place them in or is there somewhere ?
regards

It is not a complete, fully functional database. There is no ShoppingCart table for example.
AdventureWorks database is a very excellent demo database. Good job Microsoft!
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Tracing the Customer Number For deleted parked document

Hi,
I have wrongly deleted the park document . My client wants to know the customer Number of the deleted park document. Where can I fetch this details from.
I found that the Accounting document Number is stored in table BKPF with a deletion flag Can u please suggest which table the deleted customer no. for the park document is stored
Thanks in advance
Ratna & Susan

Hi Rathna
Oneway to find out the customer number is, thro transaction FBL5N, select all customer open items (with key date before the parked document was deleted) and select the noted items also.
You will be able to see the document.
Thanks
Ashok
Reward points if this is useful

Sales order According to the Customer PO

Hello all,
I am very new to SAP SD. I am using ECC 6.0 machine.
When i search and display any sales order, it contains PO number. I want details of this Purchase Order. For that i used 'BAPI_PO_GETDETAIL'. But after executing it shows me that 'PO Does Not Exist.'
After some investigation i realized that it is a Customer's Purchase Order. I need the details of the Customer PO. Is there any built in BAPI which will give me these details?? Or any table which will store the details of this PO so that i can write custom RFC to fetch data from the same??
Any Help??
Thanks,
Prashant

hello, friend.
do i understand correctly that you would like to see information related to the customer's PO?
1) normally, you receive a call from the customer with his PO or your salesman submits a customer's order with customer PO, and you create a sales order. you manually enter the PO in the field for PO in the sales order. the details of the order are what you enter in the sales order.
an alternative is that the customer PO details are first entered in an inquiry or quotation, which are later referenced/copied when you create a sales order.
that's about all of the details you can get. however...
2) if you use IDOCs or XI in receiving orders from the customer, the XI consultant maps the customer's PO number and targets the PO field in the sales order. if this is what you do in your project, then the XI consultant can help you with the PO details.
hope this helps you even a little.
regards.

Customer Hierarchy details in SAP ERP BP transaction

Dear All,
Currently we are using BP transaction in SAP ERP and also using customer hierarchy transaction VDH1N.
Now the problem is we cannot see customer hierarchy in BP transaction, we have any option that we can create relationship in the BP transaction, however its a double effort. Is there any option that we can see the Customer Hierarchy details in SAP ERP BP transaction?
Regards,
Murali

Hello Murali,
With BP transaction, do you mean business partners in XD03 / VD03?
>> we cannot see customer hierarchy in BP transaction
No, you can't see the customer hierarchy in XD03. That's correct.
In XD03 you have sold-to, payers, bill-to and ship-to.
You also have hierarchy nodes (012).
In my opinion, the customer hierarchy should only have relations between hierarchy nodes and sold-to(s).
Therefore these are different information segments => No need to see the hierarchy from the BP transaction.
Hint: Maybe that is the reason why the functionality is not available in the standard system!

Customer Bank Details creation in Lockbox using EDI

Hi Experts,
I am working on a Lockbox implementation project. Here we migrate the BAI2 based file processing to the IDOC (FINSTA01 ) based one.
When we used BAI2, in the standard program RFEBLB20, there was a logic to create the customer bank details, if they are not present in the KNBK Table. I do not see any such logic in the IDOC file processing Function Module IDOC_INPUT_LOCKBX. Is this functionality missing and we need to do it manually?
Any help on this would be greatly appreciated.
Thanks,
Ajith Cheruvally

Thanks Nithin,
I am aware of that configuration. And there is a corresponding subroutine in the BAI2 file processing program to create the BDC Session with the name that we mention there.
However, I am unable to find any relevant code for creating the BDC session in the FINSTA IDOC's IDOC_INPUT_LOCKBX function module.
No worries, I have implemented an exit with the required logic in that FM.
Thanks,
Ajith Cheruvally

FM for deleting customer contact detail

Hi,
is there any function module to delete the customer contact details.
If so, please tell me .
thanks
chandra

Hi,
You can check the FM ISAI_CONTACT_DELETE.
Regards.

How do we know the portal version ?

Hi ,
Could you help on this .
How do I know the exact version of my portal , J2ee engine .where is the best place to see this .
Thanks
Aneez

Joshua,
Thanks for your speed reply . I just copied from the location you have told me and pasted before .
Portal Version Details
#Tue May 03 18:51:22 CEST 2005
Creation-Date=20050503
Creation-Time=1851
Manifest-Version=1.0
Implementation-Title=Portal version.info
JDK-Version=1.3
Creation-User=jointadm
Implementation-Vendor=SAP AG
Sync-Changelist=45786
Implementation-Vendor-Id=com.sap
version=6.0.12.0.0
Specification-Vendor=SAP AG
Implementation-Version=6.4.0.0.200505031851
Make-Release=60NW_VAL_REL
Sync-Timestamp=2005/05/03 16\:36\:13
Version History
6.0.12.0.0.Enterprise_Portal_Support_Release
Can u make out some thing ?
Aneez

Link to know the customer Commercial details in portal

Similar Messages

Maybe you are looking for