Link to named anchor in current file not working

Links to named anchors are not working at this particular site. Works with Konqueror.
Go to this web site: http://www.kusc.org/playlist/
Right below the calendar displays is a section "Playing this Hour" and below is list hours for AM and PM. You should be able to click one of the hours and page should skip down to that hour in the playlist. This doesn't work with FIREFOX 7. Has not work since FIREFOX 5 or 6 at least. Works with other browsers.
Executing FIREFOX 7.0 on openSUSE 11.4. Mouseover shows the link as an anchor with #. Although, the referenced page is not the same. But again, this works with Konqueror on Linux and IE on Windows.

Something to do with your coding. The page we opens is HTML not a PDF file. When we click on the links, it opens the PDF. I can see that destination tag along with the URL and the PDF is properly bookmarked. So check ur code.

Similar Messages

TCS2 - Cross References between linked Frame files not working

Hi,
All the cross-references in my linked in FrameMaker 9 files work when output in PDF, however, when outputting WebHelp from RoboHelp 8, FrameMaker cross references that reference another FrameMaker file (i.e. not Current) do not work. The format is correct, they appear blue and underlined like every other link/cross-reference, but when moused over in the browser, there's no link to click. The HTML created by RoboHelp does not point to a file. For example, here's the HTML for one link not working as shown from within RoboHelp:
   •   <a>Create Supported App from
Install</a>.
RoboHelp appears to partially convert the link as appears in the HTML but I think there should be more information in the <a> definition, such as in the HTML created for a link that references a topic created from the same FrameMaker file.
   •   <a
 href="#XREF_17096_Creating_an">Creating an App</a>
I've ensured all the cross-references in each framemaker file in the book have the same format and are mapped to <$paratext> in the project settings. I've also tried importing the FrameMaker book instead of linking it and the same problem persists.
Any ideas on how to make RoboHelp create the link correctly? Any help you can offer would be greatly appreciated.
Thank you,
Jacquie Finney

Most of the major cross reference issues have been resolved in TCS 2 with further improvements in TCS 3.
Please ensure that you have all the patches of TCS 2 installed on your system.
If the issue is still there, there could be an altogether different reason for cross reference not working or the issue might have been fixed in TCS 3.
The reason or workaround can be analysed once the sample files with the issues are provided.
It will be great if you could share a small sample FM document containing the cross reference and target having the issue. If the cross reference is across documents, then a FrameMaker book along with its FM files can be shared in a zip format.
You can mail the documents to me at magrawalATadobeDOTcom
Mayank

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I was downloading podcast video in my itouch using wifi, but suddenly my wifi got disconnected and now there is a link in my podcast list which on opening uses wifi to play that video. I want to delete that link. Right to left swapping is not working.

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

Links to embedded pdf files not working in iOS reader

I have created a pdf document that links to a variety of embedded pdf files.
When I open this file in the iOS reader on my iPad 3, the links are not active. All of the embedded files are listed in the attachments list, but the links themselves do not launch the attachments.
Please help!
Thank you

We only support internal and http links in the current reader,not including links to attachments. However, PDF attachments should be open-able using the attachments button (bottom right). It should also work for password protected documents. If it does not, please share a sample file with us at [email protected] so we can investigate.
Thanks!
Pat

A link to other pdf files not working in only Android OS. How Can I fix it ?

If there is many folders and pdf files in there and a pdf file is at root and the root pdf file has many link to pdf files.
In Windows OS links work well. but In Android OS, not working. when I click links, there is no difference. How can I fix it?

Hi,
Are you trying to open a portfolio or a pdf with attachments on Adobe Reader on Android or a pdf file with links(in form of text) to other pdfs? Would it be possible for you to share the pdf with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Captivate 5 files not working in Atlantic link, help please

Version Captivate 5
Published file swf
Atlantic link's Content Point version 1.31
I've previously been using Captivate 4 and publishing swf files to be loaded in to Atlantic Link's Content Point. To get the swf files to work in the past have publish set the publishing preferences to using Action Script 2 (AS2) settings. This is not an option in Captivate 5. When I put the swf files in to Content Point and publish the elearning the swf files will not run correctly, different elements appear all over the screen.
Does anyone know of a way to resolve this problem.
Regards
David

David
Captivate 5 SWF are now AS3 .looks like you have to setup your Content point to AS3 .
Thanks
Suresh

Spry and link to named anchors

I have a page - http://jenniferyarro.com/schedule_postcardNew.htm. I want it to link to the named anchors within a tabbed Spry widget - see page http://jenniferyarro.com/schedule_detailNew.htm.
I put a named anchor inside each tabbed panel, I also tried to put the anchor on each tab. Neither one works. It appears that the anchor sees the widget as one object, therefore I am taken to the correct page, but always to the same tab (ie the one that is set as default). I was wondering if there is a way to have it link directly to the tab that I want open.
Regards,
Lisa

You may try posting this question in the Spry Forum... as this is the InContext forum.
http://forums.adobe.com/community/labs/spry
Good Luck,
-Tom

JRE7Update25 Deployment Properties File Not Working And Cant Disable Next Gen Plugin

Good Day
Our organisation needs to deploy JRE7U25 to over 4000 workstations. Our desktops are running the following Windows and IE combinations:
WinXP 32 Bit/IE7
WinXP 32 Bit/IE8
Win7 32 Bit/IE8
Win7 32 Bit/IE9
Win7 64 Bit/IE8
Win7 64 Bit/IE8
We use the 32bit JRE installer across all environments and all IE browsers use 32Bit IE. On all of our environments the Deployment.properties and config files no longer work due to what appears to be a bug in the JRE7U25 installer. Our deployment files are as follows:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
deployment.security.level=MEDIUM
deployment.security.level.locked=
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
deployment.security.mixcode=HIDE_RUN
deployment.security.mixcode.locked=
deployment.console.startup.mode=HIDE
deployment.console.startup.mode.locked=
Both files are being copied to the following location:
C:\Windows\Sun\Java\Deployment
After the installer runs and deployment files are copied to the workstation the deployment.properties and config files look like this:
Deployment.config
deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
deployment.system.config.mandatory=true
Deployment.properties
#System Deployment Properties
#Mon Jul 01 12:29:20 CAT 2013
deployment.security.level=MEDIUM
I have tried changing the deployment.config file as follows in an attempt to fix this to no avail:
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=false
5. deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
None of the above mentioned works. So all our required settings in the deployment.properties file are being overwritten when opening the Java console? Our other major problem is that Changing the registry key to 0 in order to disable the next generation plugin does not disable the next generation plugin in Jre at the usual location as it worked for us machine wide (across multiple profiles for JRE6U29):
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\10.25.2]
"UseNewJavaPlugin"=dword:00000000
^^I have observed on a fresh install of JRE7U25 that the above mentioned registry key no longer exists in this version so a computer wide disablement of this option is no longer possible via the registry.
On our 32Bit and 64bit machines running the 32 bit JRE 7U25 client when we disable the next generation plugin it keeps enabling itself again. Even when we run the javacpl.exe to run as administrator by changing the compatibility settings and disabling the next generation plugin it enables itself again. This is a huge problem for us because our company Oracle web based applications need this plugin to be disabled in order to run the apps properly.
These are major obstacles for our deployment as we desperately require assistance or any advice in addressing these issues as there appear to be numerous bugs with the JRE7U25 release. Thank you in advance.
Update 7 July 2013:
I have observed that if you have the following options in your Deployment.config file it doesn't allow our java webstart apps which use jnlp extensions to run.
1. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=true
2. deployment.system.config=C:\\WINDOWS\\Sun\\Java\\Deployment\\deployment.properties
    deployment.system.config.mandatory=false
3. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=true
4. deployment.system.config=C:\WINDOWS\Sun\Java\Deployment\deployment.properties
    deployment.system.config.mandatory=false
The jnlp file association is also broken on Windows XP workstations with JRE7U25. We are having to manually associate the .jnlp file extension with javaws.exe on workstation for Web start apps or else users cannot lauch JRE whn clicking on .jnlp links.
The only Deployment.config syntax which allows our Webstart applications to run is as follows:
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
What a mess!

I don't have an answer to the problem, but I am having problems with the system level deployment.properties file and IE9 on Windows 7 32/64bit.
Starting with version 13, the IE plugin seems to igonore the system level deployment.properties file in favor of the user level deployment.properties file. When I open the Java Control Panel, the settings are correct per the system deployment.properties file. Currently to get the Java Plugin to work reliably in IE9 I have to set the following:
_JAVA_OPTIONS = -Djava.net.preferIPv4Stack=true
Disable caching
Set the proxy to Direct Connection.
If I set the _JAVA_OPTIONS as an environment variable and the other two in the system deployment.properties file, Firefox works fine, but IE wont load either of the Java tests. If I removed the system deployment.properties files and configure the user deployment.properties file, both IE and Firefox work fine.
I find it interesting that if I set the configuration through the control panel, then apply the system deployment.propteries file, the user deployment.properties file reverts to defaults when the system file is removed.

Mac Finder previews for .AI files not working

[I'm using fully updated OS X 10.8.5, using Illustrator CS6 16.0.4]
In the Finder, all my .AI files show up only as a generic AI file icon. Trying to Preview the files in the Finder also only show the generic icon.
I've tracked down the QuickLook Generator locations, and found that I've got a generator named "illust.qlgenerator". But when I run in the Terminal.app this command: "qlmanage -t <ai file>" tells me this:
[WARNING] Plug-in at file://localhost/Library/QuickLook/illust.qlgenerator/ is 32bit
[ERROR] Can't load plug-in at file://localhost/Library/QuickLook/illust.qlgenerator/: The bundle “PDF” couldn’t be loaded because it doesn’t contain a version for the current architecture.
That Quick Look Generator is only 32-bit, which seems to be causing problems.
When I moved it to a different folder to disable it, then the native PDF.qlgenerator takes over, and puts the obnoxious grid behind the previews.
Problems with the OS X PDF QuickLook generator:
Obnoxious grid behind the actual content instead of resizing to maximize the thumbnail
Native .AI files saved without PDF compatibility show no preview, just "This is an AI file without PDF content"
To get the preview, saving with PDF compatibility would double the file size. Double.
And I still get the grid.
Is there a native Illustrator QuickLook Generator? I don't want to uninstall and reinstall CS6 just to find there's no difference. Does CS6 install any better previews than I'm getting? Another Mac user with the same setup shows beautiful full-color previews of the same AI sample files without requiring PDF compatibility or the obnoxious grid.
Thanks
Darryl Z

Hi Monika,
Unfortunately, I neglected to mention that because I work with very large illustrations with many layers, paths and nested symbols the PDF preview is not very fast.
I prefer not to save a complete pdf inside my AI files because it multiplies the file size which I find slows the cloud synchronisation of the very large files I work on.
A quick raster preview would be the most performant option, lazy loading any available pdf or ai render if the item was enlarged.
Thanks,
Luke

Absolute links on hml page in local directory not working

All the absolute links on my html pages (which are on my hardrive) are being treated as local links and are therefore not working - i.e. Firefox is adding the local file path before the url. For example, the original link is: http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article
But Firefox is adding the directory path so the url string becomes: /www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article%E2%80%9D
It is also being appended with: %E2%80%9D (which, when tested from a Word page, leads to site but generates page not found error).
For testing purposes, is there any way I can reconfigure Firefox to parse my links as absolute?
Many thanks

Thanks, both. I have carried out cor-el's suggestion of replacing the smart quotes with dumb quotes, then tried viewing link on file again using different encoading, including UTF-16 - same result as before.
Below I've set the HTML of the whole page, as per yalam96's request (it includes cor-el's suggested fix to the "prosecute" link):
<pre><nowiki><h3>Who do you need to inform (in the UK)?</h3>
If you have a mortgage, you will need to inform your provider (with most lenders this shouldn't be an issue – you do not need “consent to let” as you would if you were letting out the whole property) but you do still need to inform them; why? This is partly for the protection of your lodger, if you should default on the mortgage or die, but mostly for your own protection – if the property was destroyed or badly damaged because of the negligence of your lodger.
If own your property and it's leasehold, check the lease – you may need permission from the freeholder.
If you rent your property, you will need to firstly check with your landlord (this applies whether you rent privately or from a public landlord – Local Authority or Housing Association), and get their permission in writing, just as you would with a mortgage provider. Incidently, in the UK, a public landlord is only likely to object to the let if moving a lodger in would mean your home becomes over crowded (e.g. you have a two bed flat and your children would have to share your bedroom). They will also object – they might even <a href=”http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article">prosecute</a> - if you move out and let the whole property to the “lodger” (who wouldn't be a lodger in that case, but a full tenant, with full tenant's rights).
You may also need to cancel any existing residential home insurance and take out <a href=”http://www.landlordinsurance.biz/landlord-insurance-guides/landlord-insurance-faq/”>landlord insurance</a>. A few residential policies will, however, allow lodgers. Landlord insurance will not cover the lodger's possessions, they will need to get their own insurance, known as Tenant Insurance – policies can be compared on sites such as <a href=”http://www.confused.com/campaign/home-insurance/tenants-content-insurance?MediaCode=1054&kw=lodger+contents+insurance+broad&gclid=CPbbn9-Nj7MCFanItAod3GAAog”>confused.com</a>
If you get a single occupier's discount on your council tax, you will need to inform your local authority, unless your lodger is <a href=”https://www.gov.uk/council-tax/council-tax-exemptions”>exempt</a> from paying council tax (e.g. they're a university student).
NB People claiming Jobseeker's Allowance and most other benefit claimants are not exempt – they are, however, usually entitled to Council Tax Benefit to help with some or all the cost of their council tax.
If you're letting on a Monday – Friday basis (to someone who only needs a week night let), this person would not normally pay council tax at your property, as they already pay against their main (family) home. However, if for whatever reason you and your Monday – Friday lodger decided that they would use your address as their main home, they would then become liable to pay council tax at your address and you would lose any single occupier's discount.
If you claim any kind of means tested benefit (such as job seeker's allowance, housing benefit or council tax benefit) as benefit rules currently stand (January 2013) your rental income will affect this. Contribution based Job Seeker's allowance (JSA(C)) will be affected if your weekly rental income exceeds £50. If you're on income based jobseeker's allowance (JSA(I)), it's very likely to be affected; however, to what extent will depend on your rental earnings and circumstances and a DWP adjudicator will decide this.
However, from October 2013, when Universal Credit takes effect in the UK, <a href=”http://www.insidehousing.co.uk/tenancies/lodger-rules-to-ease-impact-of-bedroom-tax/6522846.article?MsgId=57059”>a public housing tenant's income from renting a room will no longer affect their benefit entitlement.</a></nowiki></pre>

SWF File not working after upload to server, but works on local system

HELP PLEASE.....I have created a Fla and exported a swf file
from Flash 8 and Export (Flash 6). I can preview the page in
Dreamweaver just fine, but when i upload it and the html file, it
isn't showing up. It leaves a blank spot on the page. It is just a
simple banner with graphic clips and motion tween text, with image
bgd. All images are jpg.
I have tried:
1. Using a full link to the swf file.
2. Removed drop-shodows in swf file
3. convert to Flash mx 2004 file
4. Exported to higher Flash version to see if the flash
player was an issue.
5. Exported with no dashes in name
6. Added Scr file into Dreamweaver
7. Made a new test file to see if it was something in the
current html doc, same result.
8. Tried viewing on a pc, same result. Created on mac.
Here is the test page if anyone wants to take a look.
THANKS FOR ANY ADVISE.
Test
Page Link

The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file.

Edge.oam animation file not working in Muse

Anybody tell me what I'm doing wrong?
I've created an edge animation, published an .oam file and placed it on a Muse wepage (no prob).
Preview in Muse works beautifully.
Preview in browser from Muse works beautifully.
Export Muse to HTML and Edge animation not displaying – looked at the code, shows an iframe with link to edge html, but just not working.
...help please

Someone please help me with this... I dont understand where the src path should point to when updated? Can you give an example path. I am not using edge animate but instead HYPE 3 which is relatively the same thing, exports html animations as an OAM or html file. When I use the OAM in muse it previews fine in browser and in Muse. But when I publish it shows a blank box. I looked at the code and see the iframe pointing to assets/example/example.html.
I've tried exporting the Muse file as HTML after I've placed the OAM widget in Muse.. Then I navigate to the assets file and open the HTML file and try and locate the iframe code line but it does NOT exist. But if i Publish the site with Muse and OAM widget and use the developers tools I can see the iframe. After that I've tried going through filezilla to the assets folder and opening the HTML file but still NO iframe code line exists. I only find src for .js code.
PLEASE HELP... would really like to integrate these animations into my projects.
Thanks

Y Generate to File not working?

Hai,
V are facing some probelms with reports6i.
1.we are calling the report using the command line method not
run_product.for these reports 'Generate to File' menu is not working.It shows
an error like Umimplemented Error (rep-0999).How to solve this problem.
2.In one report we are using CLOB field.but when we take the print output of
this field some of the characters are missing in print out.the problem what
we think is that, there is no entre key padding when a word wrap is
occuring.We have to give it manually which is not applicable in all
cases.Please give some methods to solve these probelms.
Please treat this as an urgent matter.
thanking you,
dilip

hai,
regarding the 1st point there is one default printer attached to my m/c.but still the same error is coming. is it bcoz v r using command line arguments.but there should not be any link how u r calling the reopt.do v need to to pass any argument for doing this operations.my generate to file menu is enabled any way.pls help me to solve this problem.
regards,
dilip

WebLogic 9.0 - HTC files not working when specified as a part of cascading

Same problem as described in:
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10511.htm
but resolution does not work for me.
I have created a mimemappings.properties file in BEA directory BEA\user_projects\domains\myDomain\config\mimemappings.properties with following content:
htm=text/html
gif=image/gif
jpg=image/jpeg
htc=text/plain
png=image/png
CSS file:
.calendarClass {behavior:url(calendar.htc)}
Web.xml:
<mime-mapping>
<extension>htc</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
I also tried htc=text/x-component.
Stop / Start of server, Redeploy of War, this does not work.
Any idea ?

Thanks Ben!
That helped. I also was using that
from the examples, and it did not play well in the HTMLPanel.
I appreciate the quick assistance, as I am pretty new to Spry. I have been creating version 2 of my website code, and one of the conversions has beenfrom JQuery to Spry for almost everything. Spry is a lot easier to conceptualize, except I completely missed the setting you gave me.
One of my problems is lack of knowledge on how to see what is happening, or not ahppening with javascript on a page. I have firebug, and that seems to give me some info. But when I tried to look at stuff with scripts running on the HTMLPanel, I was unable to see anything.
Thanks again,
Jamie

Link to named anchor in current file not working

Similar Messages

Maybe you are looking for