Link to Oracle 9i Release 2 CD?

Hello,
I'm on a dial-up and I simply cannot spend weeks downloading Oracle 9i Release 2 from the OTN Downloads section, I read that the Production version of the software is available at Oracle World but since I don't live on the same continent, I can't attend Oracle World, I was wondering if I could get Oracle 9i Release 2 on a CD from somewhere, hopefully not having to pay $$$ to get it.
Any advice/ep would be greatly appreciated

Hello
Main steps:
- make a cold backup of DB
- install new version of oracle (9iR2) and apply patchset 9.0.2.4 (on windows also should apply 9.2.0.4.3)
- change environment settings
- start DB with new version (start service, but DO NOT open with DB, startup DB with migrate option) or run ODMA
- run u0900010.sql
or run ODMA from 9iR2 Home
By the way follow the migration guide instructions!
lajos

Similar Messages

"Oracle 9iAS Release 2" Link not working

hi
I want to download Oracle 9iAS Release 2(9.0.2.0.1), but the problem is the link is not working
"http://www.oracle.com/technology/products/ias/9ias_index.html"
this is link which directed to "Oracle 9i Application Server Relase 2".
I need the 9iAS on urgent basis but ............
please solve my problem

I think you will have better luck on the 9iAS forum:
Oracle Application Server - General
Personally, I had a lot of difficulties getting the full install going on 512M (it is fine if you are running JDev and OC4J and DB) but a full 9iAS, even turning off services is tough. Given you are trying 392, I think it is even more problematic.
Mike.

SQL Server 2K "Linked Server" to Oracle 9i Release 2 via "Oracle Provider

Hi,
I'm trying to set up a SQL Server 2000 "Linked Server" to Oracle 9i Release 2 via "Oracle Provider for OLE DB". I have downloaded and installed "Oracle Provider for OLE DB Release 9.2.0.2.0"
My SQL*Net alias/datasource in tnsnames.ora works (It passes the test in "Net 9i Configuration Assistant", I can connect from SQL*Plus, and I can get a Linked server going with the "Microsoft OLE DB Provider for Oracle").
When I set up my Linked Server with Oracle Provider for OLE DB, I need to supply the following three fields (with description from the read-only field at the bottom of the "Linked Server Properties)
Product name: (The product name is the OLE DB data source to add as a linked server.)
Data source: (The data source is usually the name of the server or filename.)
Provider string: (This is the entire provider string.)
Here is my tnsnames.ora entry that works as described above (names may have been changed to protect the innocent)...
PROD9I.XYZ.LOCAL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nn.nn.nn.nn)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PROD.ora2.xyz.mno.com)
With every combination of values I have tried for these fields, when I try to use the Linked Server I get this error message...
Could not create an instance of OLE DB provider 'OraOLEDB.Oracle'.
OLE DB error trace [Non-interface error: CoCreate of DSO for OraOLEDB.Oracle returned 0x80040154].
Any help would be greatly appreciated
Thank you,
Daniel Jameson

Thanks Norman.
Well, I've made it a step closer. I uninstalled everything Oracle from my machine and reinstalled the 9i stuff, including the Oracle OLE DB Provider. Now, after I set up the linked server, and I try to view the Tables or Views under the Linked Servers, I get this error message...
Error 7399: OLE DB provider 'OraOLEDB.Oracle' reported an error.
OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IDBINitialize::Initialize returned 0x80004005: ].
Does anyone have any idea what this is about? My other Linked Server using the same Oracle SQL*Net alias, but using the Microsoft OLE DB Provider, works fine.

Link to download previous release - Oracle WCI 10g Release 3

Hi,
Does anybody know the link to download a previous version of webcenter Interaction. On the Oracle website, I can only find a link to download 10g release 4 and cannot see a page for previous releases.
The previous version I am looking for is, WebCenter Interaction 10.3.0.0.0

Go to http://edelivery.oracle.com and enter the site.
Complete the Export Restriction validation page
Select Oracle BEA and your OS on the following page.
Scroll down the product list for WebLogic Portal 10.0 and click the download button.

Installation of Oracle 11g Release 2 on Windows Server 2008 R2

Hi:
When I tried to install 64-bit Oracle 11g Release 2 on a system running 64-bit Windows Server 2008 R2.
One of the system pre-requisites failed with the following error message:
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
I presume 6.0 is Windows 2008 Server and 6.1 should be Release 2.
Does this mean that this version is not compatible with Server 2008 Release 2?
venki
Edited by: thevenkat on Jan 20, 2010 9:37 PM

Hans Forbrich wrote:
[email protected] wrote:
Does anyone know when we can expect 11g R2 for Windows?No one outside of Oracle officially knows (and they are under NDA)
No one inside Oracle is permitted to say, or pre-announce release dates for legal reasons.
Which is why I gave you the link - so you could monitor for yourself.OK, thanks...
I was just hoping there was an official release date and I just couldn't find it.
Is there any information about features in 11gR2 for Windows available yet?
Or can you maybe tell me if it will be possible to mount the new "database filesystem" like we can do on linux?
I remember oracle did something similar with Oracle ifs (Internet File System) back in Oracle 9i. (or was it 8i?)
Regards
Thomas

Hanging with Oracle 10g release 2 on Windows XP !!!

Hi,
I am trying to Install Oracle 10g release 2(10.2.0.1.0) on Windows XP Professional(SP2).
Existing environment:
1. Java(SDK & Runtime Environment) 6 update 1.
2. Configured Eclipse.
The installed procedure:
1. Downloaded "10201_database_win32.zip" from Oracle website.
2. Unzip it and run setup.exe
3. It gives an error like below :
"javaw.exe - Entry Point Not Found"
"The procedure entry point longjmp could not be located in the dynnamik link library orauts.dll."
Installation completed(forcefully) without the below.
1. Oracle Net Configuration Assistant (Failed)
2. Oracle Database Configuration Assistant (Failed).
and in services: "No Oracle process exist".
I tried the below:
A. Change the environment variables (remove ORACLE_HOME/ORACLE_SID etc)
B. 2 to 5 times un-install oracle(including registry, directory etc) and install.
C. Uninstall Java SDK & Runtime Env. Then install Oracle.
D. Installing Personal edition, Enterprise edition etc etc.
E. Checked the orauts.dll in 3 places(i. BIN ii. out/bin iii. oui/lib/win32
F. Copied the orauts.dll to system32 directory.
What ever I do the above appers all the time and installation is incomplete.
Due to this problem I couldn't move further, please do help me in solving this.
Thanks a lot in advance.

Hey Guys,
I am Srinivas Here who had been trying to install Oracle Database 10G on Windows X86 on Windows XP Professional.
If you have Win-XP Professional as your Operating System. Do not download the oracle Database using windows - XP Professional because XP will block certain installation files while downloading. In your machine install Windows 2000 or any other Windows version as a dual boot. First the download Database Zip files using your other version of Windows Operating system and then when you Unzip the files it will create a folder called Database and all the files will be present in it.If you want to store the same to cd for having to install the 10G Rel 2 database through CD then copy the contents of the unzipped database folder and store only the contents of the database folder and write them to CD's. Please see to it that while writing on cd's do not copy the folder itself .
After this, restart the system and get into windows XP Professional (Your XP Professional should be with Service Pack 2 in order to install 10G Database on windows XP - The Basic requirements for Oracle Database 10G on Windows X86).
I request you to check the software and hardware requirements from oracle Documents before you install the Oracle Database 10G on Windows x86 as well as Oracle Database 10G on Linux X86 or any other operating systems.
Finally, After you run the Oracle Universal installer in the last you will get messages for all products installed Success and finally it will ask the password for DBA and open the password management and give the password and reenter password and on the left you will have to unlock the items you would like to use.
In the last it will give you various URL links for Isqlplus, DBA, Enterprise Manager and a log report stored into oracle directory stored in your C:\Program files\Oracle folders. The correct link will be given at the end and you will have to watch the installation carefully.You can find DBCA and other options working. Try login in to Oracle through Command prompt, Sqlplus prompt availabe in Start ->Programs->Orahome10G->application Development-sqlplus as well as login through isqlplus link- Before this you should login at the command prompt as SYSDBA. YOU CAN SEE THAT YOUR DATABASE IS NOW WORKING IN WINDOWS XP PROFESSIONAL.
THANKS IN ADVANCE TO ALL FORUM MEMBERS WHO GAVE ME IDEA AND SUPPORT
REGARDS,
SRINIVAS

Unable to install Oracle 11g Release 2 in windows 7 64 bit OS

Hi,
Am trying to install the oracle 11g Release 2 database on my Laptop,
I have downloaded the two zip files from Oracle Site
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
After downloading I have unzipped started process, but after some process, am getting an error mentioning that, am missing a file in the below location
C:\$Oracle_BASE$\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications
but my unzip is successful for both the files, Please let me know why am getting this error when I have downloaded the files from Oracle site, Please let me know if I need to have
any additional s/w installed on my machine before running the Oracle database installation
Thanks

973946 wrote:
Thanks Srini,
After checking the link, I was able to install it but there were some error messages.
I have another problem log in the SQL PLUS. When I open the SQL PLUS window, it asked for Username and after I typed "sys" or "system" and hit Enter; it was prompted for password, however, it did not let me type in any word; and after I hit Enter again, the error message " ORA-12560: TNS:protocol adapter error" appeared
Any hints would be apprecieted, thanks.
SamIt wasn't preventing you from typing a password, it just wasn't echoing your keystrokes back to the screen. This is a security security feature common to most software, not just oracle. Either when asking for a password, either echo back a 'masking' character like '*' or don't echo anything. It's so common, I'm surprised you seem to have never seen it before.
So after entering your password ... the 12560 probably comes from
1- the fact you didn't have the environment variable ORACLE_SID set, so sqlplus didn' know the name of the instance/process you wanted to connect to, or
2 - the windows service for the database was not started.
Those two possibilities account for 99.99999 pct of ora-12560 on Windows installations.
Edited by: EdStevens on Nov 29, 2012 6:41 PM

We need to access a view on a 32 bit Oracle 9i - Release 9.2.0.8.0 databas

Hi
I don't know if this is the correct forum:
We need to access a view on a 32 bit Oracle 9i - Release 9.2.0.8.0 database running on Windows 2003 Server, from a MS SQL 2008 R2 64 bit system running on Windows Server 2008 64 bit.
The DBA for one of the vendors involved has concluded that it is not possible to link from 64 bit MS SQL to a 32 bit Oracle install.
If it is possible, can you advice what we need to do. Thank you.

Wrong forum.
Only solution I can think to actually get to the view.
1. SQL Server, in TSQL, alllows access to ODBC driver
2. Use a ODBC driver that can access Oracle (which probably means any SQL driver that will install.)

DB Links AND Oracle Version Compatibility

Both Client & Server running on Windows.
We have an 8.0.6 Database that has a public Database link connecting to another 8.0.6 database.
Using an OCI application to perform a simple select (using Oracle 9 Release 2 Client) :-
"SELECT * FROM USER.TABLE@LINK_NAME" gives us "ORA-03113 End of file on communication channel".
Running the same application on other client versions has given the following results:-
Oracle 8.0.5 Client - Works Fine
Oracle 8.1.5 Client - Works Fine
From the above we assume the problem lies in the Oracle client / servier combinations. Mainly that it doesn't work with a 9 client and an 8.0 server.
However, when we try the same SELECT statement on an Oracle 9 (Release 2) client in SQL-Plus it works fine.
I used Dependency Walker to check the DLLs that SQL-Plus is using. OCI.DLL is not one of them.
Is this a problem with the Oracle 9 version of OCI.DLL ?
Hope someone out there can help.
Adrian
PS: Is there a matrix somewhere that tells us the compatibillity between versions of the client against versions of the database.

Does your table contain any NVARCHAR columns?
I ran into similar problem in the past when I was
dealing with NVARCHAR columns over dblink to 8i server.
I found a patch (#1634613) that is supposed to address
the problem. That might help you also.

Oracle 10g Release 2 (10.2) for Linux x86-64

Hi All,
During installation - Oracle Database Configuration Assistance, I have got below error and thus I stuck. As per Metalink note 293988.1, this will be resolved if I do [root@localhos]# echo 1 > /proc/sys/vm/disable_cap_mlock . But problem is when I do this because I dont have /proc/sys/vm/disable_cap_mlock file in my system, it giving ¨bash: /proc/sys/vm/disable_cap_mlock: No such file or directory¨ error. So I am unable to get rid of this error. I also set SELinux Default and Current mode as permissible and rebooted it.
No use, Its giving same error.
ORA-27125: Unable to create shared memory segment.
DB Details_
Oracle 10g Release 2 (10.2) for Linux x86-64
Choosen Basic Installation
OS Details:_
*[root@localhost vm]# uname -rm*
2.6.32-100.0.19.el5 x86_64
*[root@localhost vm]# uname -a*
Linux localhost.localdomain 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
*[root@localhost etc]# cat /etc/redhat-release*
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
*[root@localhost etc]# make -v*
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for x86_64-redhat-linux-gnu
This is bugging me since last two days. Any help would be appreciated.
Thanks in advance.
Regards,
Mahi

Trust me I verified installtion guide and release notes atleast 20 times. I never had luck witht any thing. I was wondering how come edelivery.oracle.com packages (both Linux 64 bit Linux with upgrade to Unbreakable and Oracle 10g db version) is not workign for me. Finally below trick to the installed file could make my installation work(Ref link http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora2.php) . In this I am setting DISABLE_HUGETLBFS to value 1. My only doubt is, does this have any impact on performance? Can some one relay on such tweeking for prod installtions? Ofcourse I am yet to go for commercial. At present I dont have ULN or metalink authorised access.
cd $ORACLE_HOME/bin
mv oracle oracle.bin
cat >oracle <<"EOF"
#!/bin/bash
export DISABLE_HUGETLBFS=1
exec $ORACLE_HOME/bin/oracle.bin $@
EOF
chmod +x oracle
Edited by: TechMahi.com on Nov 7, 2010 10:15 PM

Oracle 10g Release 2 Spatial

Hi,
I couldn't move these questions from another post, so I deleted them and put them here:
Re: Migrating SDO_GEOMETRY to 10g TOPOLOGY
Posted By: [email protected] on Dec 3, 2004 11:08:52 AM
Hi, is there somewhere a roadmap (with dates) or/and a list of new spatial features in future releases of the oracle database
Rolf
Re: Migrating SDO_GEOMETRY to 10g TOPOLOGY
Posted By: ronan.crowley on Jan 20, 2005 8:40:07 AM
I agree, a roadmap with attached release dates and
feature listings would be an excellent resource.
Ronan

Oracle isn't allowed to provide futures information in advance of product announcements, except under non-disclosure agreements.
Oracle 10g Release 2 has been announced, so here is some high-level information about Spatial Features included in it:
EPSG Coordinate System Support
New parameters to sdo_filter, sdo_relate, and sdo_within_distance to only return data above or below a certain size with respect to the screen size(to prevent a large amount of data from rendering on a single pixel on the display, for instance)
New indexing parameter to define how Spatial/Locator internally batches index updates at commit time to allow faster index processing during inserts, updates, and deletes.
New utility function to automatically try to fix invalid geometries
First shipping release of the spatial routing engine
In GeoRaster:
Compression (JPEG and DEFLATE)
Cross-schema usage
Requirements for raster data table uniqueness, and procedures to help maintain uniqueness
Enhancements to GeoRaster Viewer
In Topology:
Add geometry interfaces for points, lines, and polygons
Create feature interface (first full release)
Load topo map procedure
remove obsolete nodes
Find the features this feature is created from in a hierarchy
Can build feature layers in a hiercharchy either from previous layer or from primitives
Simplified export/import
Network Data Model
Bidirected links
cost columns based on function (dynamic costing)
Also, numerous bug fixes across the board, and some other minor changes/additions

Need to have more info about the latest patch on Oracle 10g Release 2

Please this is the follwing answer that was given to explain the purpose of patching the latest release of Oracle 10g release 2.
We are applying the patch to the 32bit environment to resolve memory errors.
This patch should be applied to the 64bit environments too as to maintain consistency in our database versions
Personaly I don't believe the response is accurate to patch the database.
Does someone can tell me where to find more information about the latest path of Oracle 10g release 2?
Thanks a lot

You can find more information about a patchset by going over the readme document associated with the patch. As such, it is not exactly clear what kind of information you are looking for.
Login into Metalink=>Patches&Updates=>Simple Search=>
Product or Family=> RDBMS
Select your OS
if will your a link to the readme file...
Hope this helps
Thanks
Chandra

Cloning Oracle Applications Release 12 with Rapid Clone

Hi,
I was going through metalink doc 406982.1 Cloning Oracle Applications Release 12 with Rapid Clone.
I couldn't understand a few points.
I would appreciate if someone can guide me regarding the following queries.
There is a statement in the doc
1)An important principle in Oracle Applications cloning is that the system is cloned, rather than the topology ....
--What is meant by topology in this description?
2)The Cloning methodology posted on this document requires full Autoconfig complience.
--didn't get this point.
3)Note: In the copying tasks below, UNIX/Linux users should ensure that the symbolic links (soft links) are preserved when copying. On most UNIX platforms, this can be accomplished with the cp -RH command. Consult the UNIX man page for the cp command to check the parameters available on your platform.
--what soft links are being talked about?will the regular cp -R command not preserve the soft links?
4)For patching AutoConfig on the E-Business Suite R12 instance, AutoConfig needs to be enabled on both the applications tier and the database tier. (387859.1)
--HOw do I check if AutoConfig is enabled or not?
5)Why do I need to synchronize appsutil on database tier from application tier?
6)Why do we need to maintaain snapshot information?
What does snapshot actually do?
Thannks,
Rushi

This is what I get when doing "grep rror" from 9239089 logfile.
will be ignored without error.
will be ignored without error.
will be ignored without error.
0 files had fatal errors.
0 files had fatal errors.
Performing second half of mirrored copies...
No mirrored copies were executed in this patch.
oracle/apps/ad/splice/adError [120.0.12010000.1] {oracle/apps/ad/splice/adError.class }
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/forms/java/frmall.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.2/jlib/ewt3-nls.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/lib/xmlparserv2.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/oafm/applications/mapviewer/web/WEB-INF/lib/mvclient.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/mail.jar: No metadata entry META-INF/JRIMETA.DAT found
Cause: Error while trying to read metadata from file /appldev/apps/tech_st/10.1.3/j2ee/home/lib/activation.jar: No metadata entry META-INF/JRIMETA.DAT found
oracle/apps/media/ieu_status_error
oracle/xml/parser/v2/XMLErrorMsg
oracle/xml/parser/v2/mesg/XMLErrorMesg
oracle/xml/parser/v2/mesg/XMLErrorMesg_ar_AE
oracle/xml/parser/v2/mesg/XMLErrorMesg_ca_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_cs_CZ
oracle/xml/parser/v2/mesg/XMLErrorMesg_da_DK
oracle/xml/parser/v2/mesg/XMLErrorMesg_de_DE
oracle/xml/parser/v2/mesg/XMLErrorMesg_el_GR
oracle/xml/parser/v2/mesg/XMLErrorMesg_en_US
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_AR
oracle/xml/parser/v2/mesg/XMLErrorMesg_es_ES
oracle/xml/parser/v2/mesg/XMLErrorMesg_fi_FI
oracle/xml/parser/v2/mesg/XMLErrorMesg_fr_FR
oracle/xml/parser/v2/mesg/XMLErrorMesg_hu_HU
oracle/xml/parser/v2/mesg/XMLErrorMesg_it_IT
oracle/xml/parser/v2/mesg/XMLErrorMesg_iw_IL
oracle/xml/parser/v2/mesg/XMLErrorMesg_ja_JP
oracle/xml/parser/v2/mesg/XMLErrorMesg_ko_KR
oracle/xml/parser/v2/mesg/XMLErrorMesg_nl_NL
oracle/xml/parser/v2/mesg/XMLErrorMesg_no_NO
oracle/xml/parser/v2/mesg/XMLErrorMesg_pl_PL
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_BR
oracle/xml/parser/v2/mesg/XMLErrorMesg_pt_PT
oracle/xml/parser/v2/mesg/XMLErrorMesg_ro_RO
oracle/xml/parser/v2/mesg/XMLErrorMesg_ru_RU
oracle/xml/parser/v2/mesg/XMLErrorMesg_sk_SK
oracle/xml/parser/v2/mesg/XMLErrorMesg_sv_SE
oracle/xml/parser/v2/mesg/XMLErrorMesg_tr_TR
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_CN
oracle/xml/parser/v2/mesg/XMLErrorMesg_zh_TW
Errors and warnings are listed in the log file
Also I am getting same kind of errors for patches 8919489,9171651,9833058 and 12404574.
Although there were neither failures nor any ORA- error in any of the log files.
Please guide what needs to be done regarding the shown errors for the patches.
after executing adpreclone on db tier I got the following message in logfile.
error while preclone on db tier:Attempt to remove existing adcrdb.zip failed
What could have been wrong?
Is the message normal and can it be safely ignored?
As a pre-install task of patch 9239089,I executed adgrantsall.sql
which gave me a prompt Enter a value for 1:
I entered apps (apps schemaname/username)
Is it ok?
Thanks,
Rushi

NTLM module for oracle 10g Release 2 Apache on Windows 2003

Hi,
I want to implement autologon on my HTML DB application depending on the Windows username. I understand that I can implement this feature with the Apache module modntlm.
Is there anyone who has got this working on Windows 2003 Server in combination with Oracle 10g Release 2 Apache on Windows 2003.
Which version NTLM software do I need and where can I download the version for Windows 2003 server?

Nothing fantastic, we have the username/id passed in from the linking application (company intranet) as part of the URL. The process is invisible to the end-user. Possibly not ideal if you want really tight security/authentication, but it was sufficient for our needs, and the problems we had previously where users were unable to use the application have disappeared. I'd like to know the reasons for the problems we had with mod_ntlm (running on AIX), but it was more important to
me to deliver a working app than to spend time resolving probelms in 3rd party software.
Cheers.

How to download Oracle 10g Release 2?

If you look at this page "http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linx8664soft.html",
there are plenty of links. Which should I use to download Oracle 10g Database Release 2 (10.2.0.1.0). I require the one for Linux ES 4, AMD Sempron processor. There are links for Oracle Companion, Oracle Client, Cluster & Gateway. In fact, I have no idea of these softwares... Suggestions may be of great help.
Prajeeth

You could derive the answer from the Install manuals from http://tahiti.oracle.com - there is a separate install manual for each of those downloads.
A quick summary:
Oracle Database 10g Release 2 (10.2.0.1.0) Enterprise/Standard Edition
- this is the actual database and management tool set.
- this is sufficient for 85% of new environments
Oracle Database 10g Companion CD Release 2 (10.2.0.1.0)
- extras - each describe in it's own manual at http://www.oracle.com/pls/db102/portal.all_books
- Oracle HTML DB (replaced by Application Express)
- Oracle HTTP Server
- Oracle JDBC Development Drivers
- Oracle SQLJ
- Oracle Database Examples
- Oracle Text Supplied Knowledge Bases
- Oracle Workflow Server
- Oracle Ultra Search
- Natively Compiled Java Libraries
-JPublisher
Oracle Database 10g Client Release 2 (10.2.0.1.0)
- Instant Client
- Java Oracle Enterprise Manager console
- Runtime libraries (ProC, ProFortran, OCCI)
Oracle Clusterware Release 2 (10.2.0.1.0)
- infrastructure for RAC
Oracle Gateways 10g Release 2 (10.2.0.1.0)
- high performance connectivity to other databases

Link to Oracle 9i Release 2 CD?

Similar Messages

Maybe you are looking for