Link to Reporting Services

Good day. Back in SCCM 2007, one could run a report and the results you would be able to share the link with management. Now with SCCM 2012 and SSRS, I do not find a way to provide management with a link providing the results being asked. If
I provide them a link, it will still prompt them to select the specific parameters. Is there a why to create a link (hyperlink) to the results of a report that we run? Any info greatly appreciated. Thanks

You can actually link, you have to use the ReportServer URL though. Note everything after Render, use & to seperate and the parameter must match the report parameter name exactly.
Original URL:
http://lousrswps09:8081/Reports/Pages/Report.aspx?ItemPath=%2fConfigMgr_CAS%2fCIT+Reports%2fOSD+-+1E+PXE-Nomad+Masters+-+Cached+Packages+by+WKID&ViewMode=Detail
Working URL w/paramaters:
http://lousrswps09:8081/ReportServer/Pages/ReportViewer.aspx?%2fConfigMgr_CAS%2fCIT+Reports%2fOSD+-+1E+PXE-Nomad+Masters+-+Cached+Packages+by+WKID&rs:Command=Render&WKID=CITPXEWPW01
Daniel Ratliff | http://www.PotentEngineer.com

Similar Messages

MS SQL Server 2014 Report Services Link error

I have installed SQL Server 2014 with Report builder 3 for 2014 report builder is perfect working, but report services is not working when click on this link "http://microsoft:80/ReportServer" then message is alerted " Reporting
Services error" The permissions granted to user 'Microsoft\MCSD'
are insufficient for performing this operation. (rsAccessDenied)and when click on this link "http://microsoft:80/Reports" then message is alerted:
"User 'Microsoft\MCSD' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed."
i am using MCSD account as administrator so how resolve this problem?

Hi Visio,
I think this issue can be caused by BUILTIN\Administrators might be deleted by someone else. Local Administrators group is equal to BUILTIN\Administrators group on Report Manager. By default, BUILTIN\Administrators user is granted with Content Manger Role.
When someone delete the BUILTIN\Administrators group in the Folder Settings, Local Administrators group cannot access report manager and report server any more.
To fix this issue, please use an account which has access to report server to assign some sufficient permissions to the account “Microsoft\MCSD”.
Another possible is the operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications. To fix this issue, please open the Report Manager in Internet Explorer with Run as administrator option.
References:
http://technet.microsoft.com/en-us/library/aa337491(v=sql.105).aspx
http://social.technet.microsoft.com/Forums/exchange/en-US/f095f769-2081-4173-ac16-b806941f0811/uireportmanager01219c08072014161821-e-error?forum=sqlreportingservices
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Sharepoint 2013 Reporting services not fetching data via linked server

We have a functional SharePoint 2013 farm in production with WFE (Server 1 , windows server 2012) and WFE ( Server 2 , windows server 2012) and SharePoint databases including report server databases on (Server 3, which SQL Server 2012 on windows
server 2012)
Kerberos Authentication is enabled and Windows Authentication happens. Claims to Windows Service seems to work correctly too. No double hop issue. The SharePoint Reporting Services seem to be configured correctly and Reports get generated as expected
in the following cases.
1. If data is being pulled from Server A (SQL Server 2008 R2 Server on Windows Server 2008), Report gets generated no issues.
2. If data is being pulled from Server B (SQL Server 2008 R2 Server on Windows Server 2008), Report gets generated no issues.
The problem:-
We have a view on Server A, which is fetching data from Server B. This report does not get generated. Gives an NT/Authority logon failure. Server B is created as a linked Server on Server A. The setting to run under users security context is checked.
If I execute Query Builder from Report Builder 3.0, the query on the view gets the data and data is displayed in the report for next 10-15 min but after that the connections gets lost or if the user logs out and logs back in, the connection is lost
again.
Has some one experienced a issue like this? Can a report not work on a view getting data from linked server? Or I have missed some thing really important.
Any help is highly appreciated?
cheers!
Rachna
Rachna

Hi,
From your description, my understanding is that you got an error when you clicked System settings after configuring Reporting Services service application.
What size did you use for the memory? Please make sure the server has enough memory to run SharePoint and all services.
In addition, please open
http://localhost:xxxxx/SecurityTokenServiceApplication/securitytoken.svc to check if there is something about this issue.
Here is a similar post about this issue, please take a look at:
http://whitepages.unlimitedviz.com/2012/07/setting-up-reporting-services-2012-with-sharepoint-2013/
As this issue is about Reporting Services, I suggest you create a new thread on SSRS forum, more experts will assist you with SSRS.
SSRS forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=sqlreportingservices
Best Regards,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

$100 to the person that can work with me on getting Lightswitch, Telerik Reporting, Azure reporting service working.

I give up. I am not a professional developer however I am pretty good at coding. But I have limitations and do not understand how all the pieces fit together when it comes to WCF, LightSwitch and Telerik Reporting service.
I have spent the better part of the past 5 evenings attempting to deploy a WCF service to my azure account to create reports for my application. I know this should be simple but I cannot find an example that ties all the pieces together.
I have a
working lightswitch application deployed to Azure
20+ working telerik reports created in a separate project (Reports have parameters that is one of the problems)
No way to get the two to talk together.
If you have experience and feel you can help me please respond to this post and I will set up some time for us to work together online.
Regards a very frustrated part time developer
Cliff
P.S. Sorry if this is an inappropriate use of the forum but I am at my wits end!

(I am not in the running for the 'bounty' just trying to help on the WCF RIA part...)
When you deploy the application to Azure you should be able to hit the WCF RIA Service using:
site/{class name}.svc/
For example if you look at the reports I have in this example:
LightSwitch Survey: Handling
Complex Business Logic Using WCF RIA Services
You can use the live application at the following link: https://survey.lightswitchhelpwebsite.com/HTMLClient (use your
username and password from
LightSwitchHelpWebsite.com)
The call in Fiddler looks like this:
/WCF_RIA_ServiceData.svc/SurveyResults?$filter=(SurveyId%20eq%202)&$top=45&$inlinecount=allpages
This is what your reports should be calling. Can you get this far?
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

Reporting Services point

I'm trying to install the reporting services role and have hit a road block. We have one primary site and the site database is in a cluster with 3 nodes. The SQL Reporting Services is not installed on the cluster nodes but is installed on its own database
server. Does anyone know if this configuration can be used? If so any help would be appreciated.
I think I should be able to add a new Site System Role for the server hosting the SQL Reporting Services in Administration and install the reporting services point on that site system.
Thank you

Hi,
Please refer to the links below:
Deploying SCCM 2012 Part 12 – Installing and Configuring Reporting Services Point
http://prajwaldesai.com/deploying-sccm-2012-part-12-installing-and-configuring-reporting-services-point/
Configuring Reporting in Configuration Manager
http://technet.microsoft.com/en-us/library/gg712698.aspx#BKMK_InstallReportingServicesPoint
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!

Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks!

Reporting services in three tier SharePoint 2013 environment

Hi,
I am trying to integrate SQL Server 2012SP1 Reporting Services in a three tier SharePoint 2013 environment, but it seems it is not succesful.
The setup is as following:
SRV1: SQL Server with content, config,... and the Reporting Service databases.
SRV2: SharePoint 2013 Application server & Central Administration
SRV3: SharePoint Web Front with SharePoint sites
All application pools are started with domain accounts on SRV2 & 3
When opening the Central Administration site, the Reporting Services Service Application and its Proxy is created and configured. On SRV2 the Application exists in the application pool in IIS, but it does not appear in the SRV3. Should it be created manualluy?
In Central Administration, when opening the site settings the Reporting Services section is created, but when opening the Site Settings for the root site the section shows variables:
$Resources:ReportServerResources,ReportServerSiteSettingsGroupTitle;
$Resources:ReportServerResources,ScheduleList;
$Resources:ReportServerResources,SiteLevelSettings;
$Resources:ReportServerResources,ManageSiteDataAlerts;
I believe i need some help here.
Thanks in advance.
Best regards,
J

Hi J-S,
Generally, the issue occurs if you are in the Windows Powershell instead of the SharePoint Management Shell or the Reporting Services - SharePoint mode feature is not installed. So, please double check you are using the SharePoint Management Shell or install
the Add-in by installing the rssharepoint.msi instead. Here is the download link:
http://www.microsoft.com/en-us/download/details.aspx?id=35583
If it is not the issue, please install the Reporting Services - SharePoint mode from the SQL Server 2012 installation media.
Reference:
http://msdn.microsoft.com/en-us/library/ms144289.aspx#bkmk_cmdlets_not_recognized
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Upgrade 2010 to 2013 with SQL Reporting Services

I'm getting ready to upgrade to 2013.
When I run the Test-SPContentDatabase I get:
Category : MissingWebPart
Error : True
UpgradeBlocking : False
Message : WebPart class [ab6d9dad-e23c-ce4f-ff98-f6575a1ccf4c] (class [
Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportView
erWebPart] from assembly
[Microsoft.ReportingServices.SharePoint.UI.WebParts,
Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91]) is referenced [24] times
in the database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this web part.
Remedy : One or more web parts are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
web parts.
Locations :
Category : MissingAssembly
Error : True
UpgradeBlocking : False
Message : Assembly
[Microsoft.ReportingServices.SharePoint.UI.ServerPages,
Version=10.50.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91] is referenced in the
database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this assembly.
Remedy : One or more assemblies are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
assemblies.
Locations :
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [is.photomask.com] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of
target web application and the source web application.
Ensure that the authentication mode setting in upgraded web
application is the same as what you had in previous
SharePoint 2010 web application. Refer to the link
"http://go.microsoft.com/fwlink/?LinkId=236865" for more
information.
Locations :
The first two have to do with reporting services. I'm trying to workout how to go about getting these errors to go away. I don't want to remove SQL reporting or migrate a broken site and fix it later. FYI it does migrate but reporting services
is of course broken.
So what I was wanting to do was to upgrade SQL Reporting Services for SharePoint 2010 from 2008 SQL to 2014 SQL first. This would be in the hopes that it would make the migration to SharePoint 2013 work as the assemblies would change to the proper
version.
Can anyone elaborate on my upgrade path?
I'm still looking up the "Claims Based" authentication thing. I've found an article on how to migrate it so not a big deal. I do wonder however if this is tied to the issue I saw with default.aspx and home.aspx being denied to all users
after I did migrate a content db.
David Jenkins

Hi David,
The following sections describe the basic steps needed to upgrade or migrate from 2008 versions of Reporting Services SharePoint mode to 2014 version.
SQL Server 2008 R2 to SQL Server 2014
Starting environment: SQL Server 2008 R2, SharePoint 2010.
Ending environment: SQL Server 2014, SharePoint 2010.
In-place upgrade is supported and there is no down time for your SharePoint environment.
Install the SQL Server 2014 version of the Reporting Services add-in for SharePoint on each web front-end in the farm. You can install the add-in by using the SQL Server 2014 installation wizard or by downloading the add-in.
Run SQL Server 2014 installation to upgrade SharePoint mode for each “report server”. The SQL Server installation wizard will install the Reporting Services Service and create a new Service application.
If you also want the ending environment to run SharePoint 2013, you need to complete a database-attach upgrade of the SharePoint 2010 to SharePoint 2013.
For more scenarios information, please refer to:
http://msdn.microsoft.com/en-us/library/ms143747.aspx#bkmk_sharePoint_scenarios
Per the supported combinations of SharePoint and Reported Services Components, I’d recommend you firstly upgrade Reporting Services to 2014, then upgrade SharePoint to 2013.
For more information:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
The link below is the reference for migrating a Reporting Services:
http://msdn.microsoft.com/en-us/library/hh759331.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Report Services Integrated mode : Error 503 after 100 seconds

Hello,
After resolving an issue with some timeouts in shared datasets (updated value not taken into account), i am now facing another timeout (?) issue with our production sharepoint server and reporting services :
If a report takes more than 100 seconds to display, the following message is displayed on the top of the page :
"Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503"
The exception is triggered by the scriptmanager, but i don't know why : all the applications pool are running fine, and if i look in SSRS log, it shows that the task completed successfully !
Our development server is not affected by this strange behavior.
Is there a secret timeout switch hidden somewhere ??

Hi Raphael,
In Reporting Services, if the report server is under high memory pressure, the report server will refuse new requests until the current application domain is unloaded and a new one instantiated. While requests are refused, you will receive HTTP 503 errors.
To avoid this issue, you can add more memory, move the report server installation to a computer that has more memory, or change the memory configuration settings. For the detail information about it, please see HTTP 503 Service is Unavailable section on the
link below:
http://technet.microsoft.com/en-us/library/ms159778(v=sql.105).aspx
Besides, for the timeout issue, you can refer to the links below to troubleshooting it.
http://blogs.msdn.com/b/mariae/archive/2009/09/24/troubleshooting-timeout-errors-in-reporting-services.aspx
http://geekswithblogs.net/ssrs/archive/2009/10/30/steps-to-resolve-ssrs-timeout-issues.aspx
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Unable to create Database in Reporting Service Configuration

Hi,
We have SQL Server 2012 in our environment. I want to enable monitor report in Lync 2013. i have separate Lync sql instance.
I am trying to configure new database in Reporting Service Configuration manager in report Server database Configuration wizard.
while testing connection getting below error.
could not connect to server:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to
allow remote connections.(provider:Named Pipes provider,error:40-could not open a connection to SQL Server)
kindly help to resolve issue.

Hi Rakesh,
Please check the below details information:
Check the ReportServer db is present in the Database engine.
Go and check the report server configurations (go here:Start -> All Programs -> Microsoft sql server 2012-> Configuration Tools -> Report Service Configuration Manager
check all the connections if still not working. then create a new reporting services Database. While creating it make sure you select native mode, if you want to create a share point services then select share point integration mode.
If the above didn't work, Please check which port is used for SQL Server database engine from SQL Server Configuration Manager.
If we are using dynamic port, please make sure:
SQL Server Browser service is running.
UDP 1434 port is enabled in the firewall.
If we are using static port, please make sure the port is enabled in the firewall.
Below is useful link about how to troubleshoot connection issue:
http://blogs.msdn.com/sql_protocols/archive/2005/12/22/506607.aspx
https://msdn.microsoft.com/en-us/library/ms156468.aspx?f=255&MSPPError=-2147217396
Similar thread for your reference:
http://www.mssqltips.com/sqlservertip/2340/resolving-could-not-open-a-connection-to-sql-server-errors/
If you have any more questions, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to set the minimial right to run a report only on SQL express Reporting Services

Hi,
I tried several times on setup a SERVERNAME\USERA from the "Home-Report Manager --> Site Settings --> Security --> New Role Assignment..
I also checked it already have the roles (System Administrator, System User) being assigned
When I try to run the report remotely via
http://ThisISdomainNameURL/Reports_SQLEXPRESS/Pages/Report.aspx?ItemPath=
User 'SERVERNAME\USERA' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed
The permissions granted to user 'SERVERNAME\USERA' are insufficient for performing this operation (rsAccessDenied)

Hi kkcci88888,
Based on your description, you are experiencing the problem when login on the Report Server remotely, you got some error about required for permissions, right?
Generally, Reporting Services uses role-based security to grant user access to a report server, and there are two types of roles: Item-level roles and System-level roles. On a new installation, only local administrators have access to a report server. If
the user need to have access to reports, folders, models and shared data sources, we can assign Item-level roles on the root node (the Home folder) or on specific folders or items. In this case, you can check if you have assigned an Item-level role first.
bellow are about how to assign an Item-level role:
Start Internet Explorer together with the Run as administrator option. To do this, click Start, click All Programs, right-click Internet Explorer, and then click Run as administrator.
Open Report Manager. By default, the Report Manager URL is
http://<ServerName>/reports_sqlexpress. If you use a named instance of Reporting Services, the Report Manager URL is
http://<ServerName>/reports_<InstanceName>.
In the Home dialog box, click Properties.
Click New Role Assignment.
Type a Windows user account name by using this format: <Domain>\<User>
Click to select the Role(5 default roles) check box and click OK.
If you already assigned a role for the user, this issue might be caused by the UAC settings, you can find more details in this link:http://support.microsoft.com/kb/934164 and you can follow the steps below
to do the right configuration on your remote computer:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Click Security.
Click Trusted Sites and then click Sites.
Under Add this Web site to the zone, type http://<ServerName>. If you are not using HTTPS for the default site, click to clear the Require server certification (https:) for all sites in this zone check box,
Click Add.
Repeat step 4 and step 5 to add the http://localhost URL, and then click Close.
Close Report Manager and Use Internet Explorer without the Run as administrator option to reopen Report Manager.
Links bellows are about the similar thread which answered are for your reference:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/e8da121a-c0ac-4d0b-8774-abd5128d88fe
http://stackoverflow.com/questions/14433068/user-does-not-have-required-permissions-ssrs-2008-on-windows-8
https://connect.microsoft.com/SQLServer/feedback/details/622737/user-does-not-have-required-permissions-verify-that-sufficient-permissions-have-been-granted-and-windows-user-account-control-uac-restrictions-have-been-addressed
If you still have any question, please feel free to ask.
Regards
Vicky Liu

Domain users and local users can't login to reporting service web environment

Hello,
We installed reporting services at one of our customers but aren't able to use domain users to login. We've tried to login with a domain user, a local user but both aren't working. We set the proper permissions for the users on the reports folders.
We can only login with the buildin/administrator account on the local url: http://servername/reports
How can we allow login with domain users on other report manager url's?

Below link may be helpful,
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/623da309-21fa-42a8-905f-1424144a347d/setting-up-a-user-in-ssrs?forum=sqlreportingservices
Regards, RSingh

Latest Ccritical Update seems to have broken Reporting Services in SharePoint

The error I'm getting in my logs is: Cannot find site lookup info for request Uri
http://spapp-prod0:32843/29869a14ea294b42bf388f54c08b252d/ReportExecution.svc.
Here is a screen grab of the actual error. Can anyone help?

As I see the error,it seems that the RSS dependency is missing or not working after the patch.please check the links below for the same issue.
http://forums.asp.net/t/1496930.aspx?Could+not+load+file+or+assembly+Microsoft+ReportingServices+ProcessingObjectModel+
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f38b205b-df47-46fe-aca2-ee7bf83f3d88/ql-server-reporting-services-2012-sharepoint-integrated-mode-error-when-viewing-report?forum=sharepointadminprevious
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

How to print pdf file in SQL Server Reporting services report using command prompt?

Is there a way to automatically print a SQL Server Reporting services report on command prompt? For eg: We can save a pdf file using rs.exe utility. I want to print a pdf using rs.exe utility. Is it possible? I don't want to install any 3rd party software.

Thanks Simon for replying to my question.
In oracle form, there is oracle command to print the report from command prompt with the help of rwrun.exe
e.g: rwrun.exe REPORT="D:\Test\REP_25\MLA.REP" DESNAME="testprinter" DESTYPE="PRINTER" P_FORMNAME="MLA.FMX" P_SPRACHE="E" P_SPRACHE_NR2="1" P_WHERE_BEDINGUNG="order by land_nr" USERID="test/test.world" PSV_NAME="PSV_DEMO" PSV_JOB_ID="PS$9583" RECURSIVE_LOAD="NO"
BATCH="YES" NONBLOCKSQL="NO" ARRAYSIZE="1" PARAMFORM="NO" ERRFILE="c:\temp\psv16.tmp"<
and to save the report we just need to change DESNAME="c:\temp\OC_100001349.pdf" DESTYPE="FILE" in above command instead of DESNAME="testprinter" DESTYPE="PRINTER".
DESNAME and DESTYPE are the input parameters of the respective report.
In SSRS, we can run the file from the command prompt and save it.
rs -i "C:\Users\pujarswa\Documents\reports\new\LoadReport.rss" -s ww2004760:80/ReportServer_MSSQL -v fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"
-v reportPath="/TipsReport/LoadListTabular" -t -v format="PDF" -v LandNr=4 -u ap\swati -p test@# -e Exec2005
But we cannot use same command for printing as you said we need to create another script for printing files.
I have gone through the links but I dont want to use Adobe Acrobat Reader exe for printing because client it may not have Adobe Acrobat Reader on their machine.
Also I want to pass a input parameter as type="Printer" to my report which will print directly for me and same I can acheive in command prompt passing type="Printer" fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"

[Forum FAQ] How do I add an average line to series group on SQL Server Reporting Services column chart?

Introduction
In SQL Server Reporting Service (SSRS), you may need an average value on column chart.
For the above chart, add an average score line to the chart, you can get which student’s score is larger than average score, and which student’s score is less than average score clearly. This document demonstrates how to add an average line to series groups
on SSRS column chart.
Solution
To achieve this requirement, you can add another values to the chart, change the chart type to line chart. Set the value to average value of the series group and set the line to show only once by using expression. Please refer to the link below to see the
detail steps.
Click the chart to display the Chart Data pane.
Add Score field to the Values area.
Right-click the new inserted Score1 and select Change Chart Type. And then change chart type to line chart in the Select Chart Type window.
Change the Category Group name to Subject. Here are the screenshot for you reference.
Right-click the new inserted Score1 and select Series Properties.
Click the expression button on the right of Value field textbox, type the expression below:
=Avg(Fields!Score.Value,"Subject"))
Click Visibility in the left pane, select “Show or hide based on an expression”, and type in the expression below:
=IIF(Fields!Name.Value="Rancy",FALSE,TRUE)
Name in the expression is one of the Students. Then only one line chart is be displayed by using this expression.
Click Legend in the left pane, type Average_Score to the Custom legend text box.
The report looks like below:
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Link to Reporting Services

Similar Messages

Maybe you are looking for