Link to Web Analyzer from rsrt or query designer does not work.

If I start with the transaction RSRT a query in the Java Web would get the following error message:
Java Runtime Error
But if I had started earlier browser, the portal there is no problem. Is this a SSO problem?
The same problem I have when I would run in the Bex Query Designer the query.
Greetings
Kerim

Hi,
Do you have all the parameters correct in SPRO? Take a look at this, under the BW Customizing -> REporting relevant settings or BW Customizing -> SAP Web Application Server.
I dont remember the right place where you have to configure this, but it should be there.
The error is just "Java Runtime Error"? Try to talk with your Basis team, maybe there is a log to help you.
Regards, Federico

Similar Messages

I was gifted an iPhone5 from U.S and it does not work in dubai as it is locked how do i unlock it ??

i was gifted an iphone 5 from U.S and it does not work in dubai as it is locked how do i unlock it ??

Only the carrier it's locked to can unlock it. Have whoever you got it from contact the carrier it's locked to and request an unlock.

I just installed Adobe CreatePDF desktop printer, when I try to use from Word or Excel, it does not work. The Adobe print queue says "error" in the status screen. I have uninstalled and re-installed. Any ideas of what to do next?

I just installed Adobe CreatePDF desktop printer on a Windows 7 home PC. When I try to use from Word or EWxcel, it does not print. The Adobe print device queue reports an "error" in the status column.

Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well...

Linking Keynote on iPod-Touch with Keynote on MacBookPro does not work.

I purchased Keynote 5.0.5(942) for my MacBookPro (MacOS 10.6.7), and
KeynoteRemote 1.2 (53) for my iPod-Touch 4th generation.
I am trying to link KeynoteRemote on the iPodTouch with Keynote on MacBook Pro.
KeynoteRemote gives me a Passcode, which I enter in the preferences panel on Keynote for MacBookPro.
Verification does not work. Nothing happens, and after sometime an error message appears that
verification has failed.
I have tried to do all combinations of setting the firewall on or off, and checked out all linkage and network settings.
Does anybody know what the tricks are to get KeynoteRemote to work with Keynote on MacBookPro?
Or does KeynotePro not work at all?

thanks, David. it works now. I think the problem was the firewall. I fixed it now.

Drag and Drop from Photos app to Safari does not work (Regression to iPhoto)

Drag And Drop from the new Photos app to Safari does not work. This worked perfectly with iPhoto before.
I use this a lot to upload photos to a Wordpress blog. Is there a way to make this work again? Its a major regression to the old iPhoto behaviour -- at least for my workflow.
Regards

Use the Media Browser. This was written for iPhoto but it still works for 95% of Photos. It's the first option you want:
https://discussions.apple.com/docs/DOC-4491

Airplay on ATV and AX from Lion and ML: ML does not work...

Hi all,
I am having a problem with Airplay under Mountain Lion...but not under Lion.
On a MBP 13 (Summer 2009), I can use iTunes Airplay under Lion to stream music to both an Apple TV and to a Airport Express. In fact, I can play iTunes music on the MBP, the Apple TV, and the Airport Express simultaneously (all 3 or any 2 or any 1, individually). [Of course, Airplay display mirroring does not work under Lion, but iTunes Airplay does.]
On a MBP 15 (Early 2011), I can use Airplay under Mountain Lion to mirror the MBP's display on the Apple TV and thus through mirroring I can stream the music from iTunes to the Apple TV. I cannot stream from iTunes to the Airport Express, whether or not I an mirroring to the Apple TV. In other words, even when the mirroring to the Apple TV mirroring is Off and the Apple TV is off, I still cannot use iTunes to stream music to the Airport Express. Now the Airport Express speakers shows up as an option in the iTunes Airplay menu, but when I select it in the menu it does not do anything.
In summary, using Lion I can stream iTunes music to both an Apple TV and to an Airport Express speakers, individually or simulaneously. Using Mountain Lion, I can stream iTunes music to the Apple TV, but only through the use of Airplay display mirroring. I cannot stream music to the Airport Express speakers even though the AX shows up as an item in the iTunes Airplay menu.
Any ideas how to fix this for ML so that it works as in Lion? I checked and have the same Preferences set for both the Lion iTunes and ML iTunes.
Thanks,
Switon

...a little more experimentation...
I booted the MBP 15 (Spring 2011) from an external backup of Lion (made immediately prior to switching to ML). When I turn off the Server Firewall then I can iTunes Airplay to both the Apple TV as well as to the Airport Express. But when I turn on the Server Firewall, even after allowing ports 3689, 42000-42999 both TCP and UDP, the Airplay does not work. I could not determine which ports were needed for iTunes Airplay, all I could figure out is that when the Server Firewall is off then iTunes Airplay works but when the Server Firewall is on then iTunes Airplay does not work. I tried logging all denied packets, but to no avail, I still could not determine which ones were being denied.
Interestingly, when I turn off the Server Firewall and switch on the System Preference Security pane Firewall, I can still iTunes Airplay to both the ATV and AX. It makes me wonder if when I switched to ML from Lion that some ipfw rules were not left over from the Lion Server Firewall that then keeps ML from allowing iTunes Airplay to work. (I wonder if I restore my Lion Server, then switch off the Lion Server Firewall, then download and install ML once again, then download and install OS X Server once again, whether the iTunes Airplay would then work? Maybe when I have some more time I'll try this, in the meantime I'm going to try a little harder to figure out why the Lion Server Firewall stops iTunes Airplay from working. Dang nabbit, even "ipfw show" does not tell me which packets are being denied when the Server Firewall is ON and iTunes Airplay does not work...does anyone have any suggestions on how to figure out why the Server Firewall is stopping iTunes Airplay from working?)
Thanks,
Switon

Using local file links like file://n:/path/filename.txt in Announcements does not work

Hi all,
I would like to use the SharePoint 2013 announcement web part for our company intranet. Basically this works fine. Now and then we have the need to include local file links into the body of the announcement, e.g. "Read this new Version of
file x: link". When creating a new announcement I can insert a link like this:
file:///n:/path/file.docx or similar.
But as soon as I save the new announcement, the link is gone (href part is removed from the anchor).
Is this behaviour per design? Can I change it to allow local file links inside of list columns?
Thanks for your help,
Nothi

Hi Nothi,
We can go to that particular existing announcement list(e.g. mine is Announcement1)->list settings page.
1. then make sure the option "Allow management of content types? " is enabled from Advanced settings.
2. then click "Annoucement" content type link (like image below).
3. then click "Body" column link.
4. then click "Edit column" link.
5. then select "Rich text" option as above image showed, save the change.
6. then you can test again in this particular announcement list, it should work.
If you want make all announcement type lists could use link to network location in the furure, you can create a custom announcement content type with the Body column which has enabled this "Rich text" option, then use this
custom announcement content type for those lists.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Home link in upper left corner of Desktop Facebook site does NOT work. Will not go to Newsfeed

Pressing the "Facebook" logo in top left corner will not work most of the time. The newsfeed does work..but let me explain this a little better. Say, I'm on a friends facebook page using the full site...I want to go to my newsfeed so I click the "Facebook" logo in the left hand corner next to the notification icons....poof....nothing happens, except, I notice the little padlock on the left side of the address bar disappear. I can let it sit and it will never do anything. If I press the facebook logo about 15 times, then it will finally load the newsfeed. It seems like some kind of issue going from secured to unsecured pages. It does not do this when I am in one of my groups though...odd. I have always had to use the addeess bar to go back to the newsfeed . This problem has existed through many versions of Firefox. No other browser does this.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
The Firefox cache temporarily stores images, scripts, and other parts of websites while you are browsing. <br>
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies, do the following:
#Tap the menu icon located at the top right corner. This is the icon with 3 bars. On older Android devices you'll have to press the hardware menu key and then tap More.
#Tap '''Settings'''.
#After that, you will be taken to the settings screen. In the settings screen, look under the section '''''Privacy & Security''''' and select '''Clear private data'''.
#You will then be taken to a list of what can be cleared. Select the following 2 for deletion:
#*Cookies & active logins
#*Cache
#After those have been selected, tap the '''Clear data''' button to actually clear the cache and cookies.
Did this help you with your problems? Please let us know!

The BI report created by Query designer does not display all columns

Dear Experts,
I have created a BI report using the Query Designer.
When I execute the query, only 6 columns have been displayed.
The total columns are 12. I need to display all 12 columns at the first instance.
Could any one help me to resolve this problem?
Thank you very much!
Arthur

Hi Athul,
Thanks for your reply.
There is not marked for '.Supress Zero' in the Rows and Columns.
And I did not check for 'Hide repeated values' in the Display tab.
Any other place you could suggest to verify?
Thanks
Arthur

Dynamic Interface in Query String does not work?

Hi All,
i have exposed a interface as a webservice with the help of the Define Web Service in Configuration Builder.
In the SOAP Sender Communication Channel i have checked the options Use Encoded Headers and Use Query String
The url of the webservice looks like this:
http://server:50000/XISOAPAdapter/MessageServlet?channel=:BS:CC_SOAP_SENDER&version=3.0&Sender.Service=BS&Interface=http%3A%2F%2Fnamespace.com%2Fabc%2HER%2FGlobal%5EMIOS_GetDetails
This works which is great, i can now retrieve supplier details with this webservice. Now i want to expose another interface as a webservice. That URL looks like this:
http://server:50000/XISOAPAdapter/MessageServlet?channel=:BS:CC_SOAP_SENDER&version=3.0&Sender.Service=BS&Interface=http%3A%2F%2Fnamespace.com%2Fabc%2HER%2FGlobal%5EMIOS_EventBooking
As you can see i have a different interface in the URL's of the Webservices. I want to have both make use of the same Communication Channel which is possible according to [SAP Note 856597|https://websmp130.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=856597] See Q: Can I set the interface name dynamically from the client? also in this document : [How to Use the XI 3.0 Soap Adapter|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79]
The problem is that when i try to call the second web service (EventBooking) that is routes to the mapping of the GetDetails interface, i can see this in SXMB_MONI. Therefore it gives an Error.
When i try both scenarios in Configuration Builder they both work fine, only the webservice call of EventBooking ends up in the Message Mapping of GetDetail.... Why? And how to solve this?
Anyone have experience with the feature mentioned in the SAP note?

After some further examination it seems that both calls are picked up by the same interface. In the RWB both the messages are picked up by the MIOS_GetDetails...
How can i fix this?

Bridge Cache Destination Cannot be Changed from Old User and Find does not Work

Often administrators find themselves in a position of making a new admin account to resolve a lost system drive or some compatibility problem.
If Bridge has a cache destination linked to this old account, it is due to the older admin account being deleted before the new admin account is setup in Bridge with the cache destination properly linked to the new user cache in the library locations for bridge caches. This problem causes some headaches with things like keywords and find.
If you have had to restore your system or generate a "new user" account, it would be important to go into Bridge and ensure that your cache preference in pointing at the right location, before deleting the "old user". If the "old user" is deleted, you might find the cache location locked to this "old user" in a file structure that no longer exists. This makes if fixed and unchangeable.
If you encounter this problem, regenerate the old user name as an administrator account. Go into that account and start Bridge. Check the location of the cache file in the preferences. You will see that it is located in the proper place for this new account. It is also the same location as your current account which no doubt you have found is frozen into place.
At this point, while in the "old user" admin account:
Go get info on your "old user"/Library/Caches/Adobe/Bridge CS3/Cache
Note the folder nest and go to each folder and apply permissions to each of these folders that allow your "new user" read and write access. You can do this in one step by applying the permissions to the Library folder and all enclosed folders, but who knows what that might do. Focus on solving the problem.
Then:
Switch back to your "new user" (that is your current user) account, open Bridge, go to the preference for cache and you will note, magically, it is now located in the right account, it has been unfrozen from the "old user", once deleted, and now brought back to life to help you get ride of this problem.
For good measure, press the choose button, you will find you go to the finder to the right location in your "new user"/current user account.
You will also find that FIND works after this and also Bridge is zippy and fast as it should be.
You can now quit Bridge, Log Out of your "new user" account, log back in and find that all is just the way it should be. Once this is done, go into your system preferences for users and delete the "old user" account (into the trash, do not save a thread).
It seems that there are many situations where reviving and old user id will help with repairs to permissions problems in a mac that has been through system drive failure or significant application conflicts that require making a new user.
Hope this helps someone.

Often administrators find themselves in a position of making a new admin account to resolve a lost system drive or some compatibility problem.
If Bridge has a cache destination linked to this old account, it is due to the older admin account being deleted before the new admin account is setup in Bridge with the cache destination properly linked to the new user cache in the library locations for bridge caches. This problem causes some headaches with things like keywords and find.
If you have had to restore your system or generate a "new user" account, it would be important to go into Bridge and ensure that your cache preference in pointing at the right location, before deleting the "old user". If the "old user" is deleted, you might find the cache location locked to this "old user" in a file structure that no longer exists. This makes if fixed and unchangeable.
If you encounter this problem, regenerate the old user name as an administrator account. Go into that account and start Bridge. Check the location of the cache file in the preferences. You will see that it is located in the proper place for this new account. It is also the same location as your current account which no doubt you have found is frozen into place.
At this point, while in the "old user" admin account:
Go get info on your "old user"/Library/Caches/Adobe/Bridge CS3/Cache
Note the folder nest and go to each folder and apply permissions to each of these folders that allow your "new user" read and write access. You can do this in one step by applying the permissions to the Library folder and all enclosed folders, but who knows what that might do. Focus on solving the problem.
Then:
Switch back to your "new user" (that is your current user) account, open Bridge, go to the preference for cache and you will note, magically, it is now located in the right account, it has been unfrozen from the "old user", once deleted, and now brought back to life to help you get ride of this problem.
For good measure, press the choose button, you will find you go to the finder to the right location in your "new user"/current user account.
You will also find that FIND works after this and also Bridge is zippy and fast as it should be.
You can now quit Bridge, Log Out of your "new user" account, log back in and find that all is just the way it should be. Once this is done, go into your system preferences for users and delete the "old user" account (into the trash, do not save a thread).
It seems that there are many situations where reviving and old user id will help with repairs to permissions problems in a mac that has been through system drive failure or significant application conflicts that require making a new user.
Hope this helps someone.

2.1.0.62: Exporting query results does not work if SQL has a join

I get an error message, when I try to export the following test case to any data format.
create table test1 (id number(2), text varchar2(5));
create table test2 (id number(2), text varchar2(5));
insert into test1 values (1,'test');
insert into test2 values (1,'test');
select t1.*
from
test1 t1,
test2 t2
where
t1.id=t2.id;
I try to translate my german error message to english:
"There are no valid columns for export available. Clob- or Blob-Columns are currently not supported"
I get this message, when I right click into the query result grid and select export and then any data format.
Hope that is not a double post but searching for export did not find results for 2.1.
The following SQL also produces the error:
select t1.* from test1 t1;
These SQLs can be exported though:
select * from test1 t1;
select t1.id from test1 t1;
I should have mentioned that I work with Windows XP and Oracle 10.2.0.4.
Regards,
dhalek
Edited by: dhalek on Oct 13, 2009 5:04 PM

Hi,
Dhalek.
I've got the same problem here.
In my SQL Dev, I disabled the Autopopup code completion insight in SQL Worksheet. (Tools - Preferences - Code Editor - Code Completion - untick the checkbox). Restart SQL Dev. Tried to export a query.
The same error message appears.
My workaround is to re-enable the autopopup and restart SQL Dev.
The disabled autopopup code completion insight caused me these
2.1 EA1: Bugs - cannot Export Data from Grid
2.1 EA2: Bugs on code completion for displaying column name
Hope this helps,
Buntoro

How can I sign out from CC if my PC does not work?

Hi there, I have downloaded the CC programes on my PC Desktop and Apple MacBook. My PC stopped working and I have acquired a new Apple Desktop. Now I try to download the programs on the new Apple. I have received the message that I have to lock out from Creative Cloud on my PC Desktop. How can I lock out if I cannot start my PC? Thank you.

Contact support by phone or web chat and they can handle iit on their end.
Mylenium

The flash on my camera is not working. Even when I switch from auto to on it does not work.

I have witches from auto to on and the flash for my camera still doesn't work. I have not dropped it and the flash was working just 2 days ago.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Save document from word into sharepoint library does not work !

Hi,
I'm trying to resolve a problem that i have with word and my sharepoint website.
Some of my users have to open and RDP session on a windows 2008 server and work from there. They open their session with their credential and they do everything they do in local on sharepoint using IE.
BUT, we have always and ever had an issue on this server as they c'ant save a document (Word or Excel) from office. They have to upload it from sharepoint uising IE. In example, i want to save my document from word into the sharepoint document library I have
this error message :
"Windows doesn't find (http://intranet.sharepoint.com/DocumentLibrary/). Check and retry".
If I open my sharepoint site and i upload the document it works perfectly. Also if I open and edit an existing document from any library it will work with word. The problem seems to happen when i want to browse sharepoint from word for saving files...
As this server is a windows 2008, IE version is 9 and the office version is the same as on all computers (Office 2010 SP2 32Bit)
Any help would by appreciated
Regards

Hi,
I understand you encountered the issue when save document from Office client application to SharePoint 2010 site.
Is there any Proxy settings in networking side? Please bring up IE > Internet options > Connections > Lan settings. If so, please uncheck options in Proxy server and test the issue again.
If you have deploy GPO to add SharePoint site into Trusted sites, please check if there is any other GP associated with trusted sites that might affect the issue. You could also remove it from Trusted sites via IE options and test the issue again.
In addition, please provide more error message to help narrow down the issue, you could locate error information in Event log at least.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Link to Web Analyzer from rsrt or query designer does not work.

Similar Messages

Maybe you are looking for