Link with an object or an image?

why isn't it possible to establish a link with an object or an image?

See the topic 'How To Link An Image' in the iBA user tip 'iBA Tips and Tricks 01'.

Similar Messages

Link with SAP objects documents already stored in Docuemntum

Hi all,
I am working in the configuration of archivelink between SAP RE-FX and Documentum with Object Type BUS1503.
I am able to store documents from SAPGUI in Documentum but now I would like to do the other way around. It means, documents already stored in Documentum I want to link them to this object Type to been able to display them from SAP-GUI. Where can I find documentation about this? I ahve been checking but I can not find anything.
I have no access to Documentum itself so it is quite difficult for me to check this other way around.
Thanks
Diana

Hi Diana,
Chekc whether object links available in documentum or not? I am quite doubtful about the feathure.
If not then access from SAP GUI and link to this object as you don't have access to documentum.
I hope this can help better.
BR,
Ravindra

DMS Object Linking with Appropriation Request (Ecc6.0)

Dear All,
ECC 6.0(ERP 2005)
<b>Steps:-</b> (Error in Object Link for Appropriation Request)
I am opening DIR in change mode
going to object links TAB
attaching object link for appropriation request
saving the DIR
Re-opening the same DIR with Appropriation Req. Object link
going to object link TAB
double clicking the attached object for Appropriation Req.
<b>Error****this does take me to maintained TCODE IMA11 for Appropriation Req. "but it does not display specific attached object"</b>
I mean it is not displaying attached object (Appropriation req.,Variant) it just take me to initial screen of IMA11....
IF any one knows possible solution pls. reply
Regards,
Tushar Dave

Hi Dave,
please change the transaction from IMA11to IMA3 and see if the request is now
displayed. In transaction SPRO under
Cross-Application Components
-> Document Management
   -> Control Data
       -> Maintain Key Fields
the entry for object IMAV should look like this:
IMAV     IMA3     POSNR1
I hope this information will help you.
Best regards,
Christoph

Object link with finanace Documents (Vendor Invoice) Tcode FB03

Hi all,
Can DMS object link be maintained with finance documents for ex Vendor Invoice?
Tcode FB03.
Thanks
Ansih

Hi,
you can link documents to purchase order item or purchase requisition then obviously this will be displayed in vendor invoice.
Best practice is to use SAP DMS standard functions. Don't go to link with vendor invoice.Anyhow MIRO and MIGO transaction are
depeandent on purchase requisition.I hope this will resolve your query and is a best practice.
Regards,
Ravindra

TextImage shows links with chainlink image. Why?

The TextImage component shows my links with chainlink image. Why? Even in preview mode, it shows the chainlink image and the links are not clickable.
See the bottom-right of the attached image. How can I fix the links?

Thanks Justin. That was the problem. I had written "www.google.com" instead of "http://www.google.com".

Object link with RFQ

Hi
How can we Object link with Request for Quotation (RFQ)?
Regards

hi,
YES,
you could use object link in DMS, CV01n, Basic data screen, select request for quatation, and add your RFQ Number.
save the entry.
note: prereqisite is u have to configure this object in DC10. object is 'EBAN' in define Object links.
Benkaraja
??P

Promoted links with Image Carousel (Rotating Banner)

Hi,
I am using promoted links webpart. I want to have cycle of images. For eg: I have 10 images . With the slider , I can go to next image horizontally. Once I reach the 10th image,there won't be any next option. I want to display the 1st image after
the 10th. Means, the sliding should be never ending. How can I achieve this. I think I can use javascript to override the default promoted links functionality. Please suggest on how to do this. Thank you

Hi,
According to your post, my understanding is that you want to achieve rotating banner for promoted links web part.
With JavaScript, it will be easier to implement such a web part.
Here are two links with code demos for your reference:
http://www.codeproject.com/Articles/667584/Image-Rotator-in-JavaScript
http://jsfiddle.net/jtbowden/UNZR5/1/
You can also take use of these jQuery image plugins in your project:
http://www.jssor.com/index.html
http://www.webdesignerdepot.com/2011/08/25-jquery-image-galleries-and-slideshow-plugins/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Linking a Light with a object

How can I link the position of a light with a object?
I've draw a mask on a 2D solid (Light-Spill) that appears to be the light (Light-Spot) hitting the floor (another 2D object (still photo)) and I want to be able to move the Light in the X dimension and have the Light-Spill follow with it. Now, I can do this by hand but I thought there would be a way to link the position properties by a behavior but none seem to be the correct thing. Can you not just add a "script" to a property like postion.Light-Spill=positon.Light-Spot
TonyTony

Hey Case,
That did work. I had to make the Light-spill group a 3D group (then turned off lighting) and applied Match Move, dropped the Light-spot object in the source well. My Light-spill moved off the screen somewhere until I changed the transform pulldown from Attach to Mimic.
A behavior (expression) that you can change various things on would still be a nice addition. I could see one called Link (in the Basic Motion group), that you apply, then drop a source object in the well, then have some pulldowns the allow you to pull from a particular property and then modify that information and apply to a particular property. Something like take scale from object A and effect rotation of object B. Also would be nice to see the expression in a text field somewhere. This why you could make you own.
Probably throw this into the Motion user feedback.
Thanks, your Special.
TonyTony

Document Object Linking with Material

Dear All,
I have a small query regaridng the object linking between document and material. Whenever i create part in CAD system, i am creating a document and material for the part in the SAP PLM system using the CAD Interface. Then if i log onto the SAP PLM system under document i am able to see the linked material in object links. Where as i am not able to see the document link in the material basic data screen.
Where can i found the document linkage information for the material in material master screens.
regards,
rajesh.

Hi Rajesh,
in transactions MM02 and MM03 you have to go to the "Additional Data" Screen. Please use the button and then switch to the "Document Data" tab. Here you should be able to see the linked document info record.
Best regards,
Christoph
P.S.: Please reward points for usefull informations.

Link a "Smart Object" with his Mask - possible?

Hello -
Is there a way to link a smart object and his mask?
It's really annoying, because, when I move my smart object, his mask doesn't follow!
Thank you, have a nice end of day
- Dimitri

At this time, Smart Objects can't have masks linked to them. So place your smart object in a group by itself, then create a mask for the group.

Can ObjectStates become buttons that link to another object state?

Hi. I am working on Adobe CS5 and I am trying to create an Image gallery. I know how to create the basic type which is stacking the images, making them as object states, and then linking the navigation buttons to "Next State".
The type of image gallery i'm trying to make involves thumbnails. In the thumbnails menu, there are back and forward arrows that will move the thumbnails from left to right. The way i did it was grouping the thumbnail images, convert them as object states, and just do the Left/Right animation through the Object State menu. The problem is, I can't make those thumbnails link to the picture it is assigned to. The Object states that appear in the button menu is just the object state of the thumbnails and not the Image viewer it self.
If it is needed that i post a SWF demonstration of this, can someone show me how to?

Here is a sample image
What I'm trying to do is have a scroll like action with the thumbnails and when the user clicks the specific picture/thumbnail, the enlarged image will appear on the top.
the only way i can create the scrolling action is by making the thumbnails into MOS and just change their position in each state. the problem is I can't link the thumbnails specifically to the image it is supposed to display. I hope this explanation helps.

How to use data sets with smart objects?

Hi,
I have a psd of some mock-up boxes, and I want to apply different text to multiple versions. The solution here: http://helpx.adobe.com/photoshop/using/creating-data-driven-graphics.html is good, but doesn't seem to work with smart objects?
The file that I have has the box label as a smart object (which opens as a psb). How could I apply a data set to that, and have it pump out multiple jpegs?
If I apply the data set to the psb layers, then go back to the main image, I cannot export the whole complete picture anymore.
Thanks!

What database and connection type are you using? Are you connecting the report directly to the database, or trying to assign the datasource to object data?
It sounds like you might be trying to use a linked list, collection or other C# construct to pass your data in. This currently isn't supported by the Crystal Reports SDK. You can use a DataSet or a DataTable, and possibly also an IDataReader depending on which version of Crystal Reports you're referencing in your project. Of course you can also connect directly to the database, even if the database isn't on the same machine as the application.
The way to show master records with detail information is through the use of subreports and linked subreport parameters. Linked subreports take their parameter value from a record in the main report, so that only the data appropriate to that master record is displayed. The guys over in the [report design|SAP Crystal Reports; forum can help you out with this if you have questions on the specifics.

Working with PowerPoint objects in 7

I'm evaluating Captivate 7, comparing it with Articulate Storyline. One of the adverstised features of 7 is the ablity to import PowerPoint including, explicitly, all object and animations. I have tried this and so far it only looks like it creates an image of the PowerPoint slide. I can't see how to directly interact with the PowerPoint shapes, text, etc. except by opening a linked PowerPoint session. But I would like to create a drag and drop interaction with the objects in the PowerPoint slide, or apply other Captivate effects to the objects. This is easily done in Articulate Storyline which turns the objects into Storyline objects. Can I do the same in Captivate? What am I missing?

Hi folks
Slight correction here. PowerPoint slides are imported and converted to Flash animations. (.SWF files) and the .SWF is set as the background image.
Likely what is meant by importing all objects is that they are all included in the SWF? Not sure. Additionally, while any changes must be made using PowerPoint, Captivate has a way of opening PPT under its control to make changes.
Cheers... Rick

Detecting an object in an image

hi all
i need to know how to detect a particular object like a ball or a rectangular block within an image
i tried opencv but it failed to detect an object within an image the C code used in JNI is given below
#include <stdio.h>
#include <stdlib.h>
#include <jni.h>
#include "sift.h"
#include "imgfeatures.h"
#include "kdtree.h"
#include "utils.h"
#include "xform.h"
#include <cv.h>
#include <cxcore.h>
#include <highgui.h>
#include "helloworld_HelloWorld.h"
#define KDTREE_BBF_MAX_NN_CHKS 200
/* threshold on squared ratio of distances between NN and 2nd NN */
#define NN_SQ_DIST_RATIO_THR 0.49
/******************************** Globals ************************************/
char img1_file[] = "..\\football.png";
char img2_file[] = "..\\sift.png";
JNIEXPORT jint JNICALL
Java_helloworld_HelloWorld_printNat(JNIEnv *env, jobject obj)
IplImage * img1, * img2, * stacked;
     struct feature* feat1, * feat2, * feat;
     struct feature** nbrs;
     struct kd_node* kd_root;
     CvPoint pt1, pt2;
     double d0, d1;
     int n1, n2, k, i, m = 0;
     img1 = cvLoadImage( img1_file, 1 );
     if( ! img1 )
          fatal_error( "unable to load image from %s", img1_file );
     img2 = cvLoadImage( img2_file, 1 );
     if( ! img2 )
          fatal_error( "unable to load image from %s", img2_file );
     stacked = stack_imgs( img1, img2 );
     fprintf( stderr, "Finding features in %s...\n", img1_file );
     n1 = sift_features( img1, &feat1 );
     fprintf( stderr, "Finding features in %s...\n", img2_file );
     n2 = sift_features( img2, &feat2 );
     kd_root = kdtree_build( feat2, n2 );
     for( i = 0; i < n1; i++ )
          feat = feat1 + i;
          k = kdtree_bbf_knn( kd_root, feat, 2, &nbrs, KDTREE_BBF_MAX_NN_CHKS );
          if( k == 2 )
               d0 = descr_dist_sq( feat, nbrs[0] );
               d1 = descr_dist_sq( feat, nbrs[1] );
               if( d0 < d1 * NN_SQ_DIST_RATIO_THR )
                    pt1 = cvPoint( cvRound( feat->x ), cvRound( feat->y ) );
                    pt2 = cvPoint( cvRound( nbrs[0]->x ), cvRound( nbrs[0]->y ) );
                    pt2.y += img1->height;
                    cvLine( stacked, pt1, pt2, CV_RGB(255,0,255), 1, 8, 0 );
                    m++;
                    feat1.fwd_match = nbrs[0];
          free( nbrs );
     fprintf( stderr, "Found %d total matches\n", m );
     cvNamedWindow( "Matches", 1 );
     cvShowImage( "Matches", stacked );
     cvWaitKey( 0 );
cvReleaseImage( &stacked );
     cvReleaseImage( &img1 );
     cvReleaseImage( &img2 );
     kdtree_release( kd_root );
     free( feat1 );
     free( feat2 );
     return m;
i donot want help exactly with opencv but a java code to detect an object within an image will be helpful and
help on any modification i can make on the above program will be also helpful
thank u

Hi friend!
I have the following issue:
I'm trying to build a C++ DLL that uses OpenCV.
But when I try to compile, I have the following errors:
[Link Error] undefined reference to 'cvQueryFrame'
[Link Error] undefined reference to 'cvReleaseCapture'
[Link Error] undefined reference to 'cvReleaseImage'
I'm using Dev-C++, and I set all the libraries directories correctly. If I try to compile an .exe file that uses OpenCV, it compiles successfully.
Please help me! I'm getting "crazy" with that...

Remove All Missing Links with frames

How can I make a script to remove all missing links with frames In indesign?
var doc = app.activeDocument;
var links = doc.links;
for (var i = links.length-1; i >= 0; i--) {
if (links[i].status == LinkStatus.LINK_MISSING) {
try {
   links[i].parent.remove();
             var image = link.parent;
          var frame = image.parent;
          frame.remove();
          counter++;
catch (err) {
   $.writeln(i + " - " + err);
I try this script, but still remain a frame, what's wrong with that?

@Harvey – in priciple nothing's wrong with that.
But you need only to remove the parent.parent of the found link.
You could also resolve the object that is behind parent.parent to make sure it will work:
var myContainerToRemove = links[i].parent.parent.getElements()[0];
myContainerToRemove.remove();
No container, no image, no link ;-)
Of course that will leave a container frame behind, if the container of the graphic is itself nested into another object.
This could be a Texts object (together with a text frame) or a SplineObject like a Rectangle, Oval, Polygon, a Button as well as a State inside an MSO…
A remnant could also be a Group object containing only one page item…
Depends on how the page items are used and the layout is constructed.
Uwe

Link with an object or an image?

Similar Messages

Maybe you are looking for