Link with table CAWN and MSEG

Hi Friend how can i link with clasification
fields(CAWN-ATWRT) with meterial document no(MSEG-MBLNR)
in MM in the transaction migo.
Thanks and Regards
D Tarun Kumar
Edited by: Devalla Tarun Kr. on Sep 9, 2008 2:29 PM

If you want the Material Classification, then for each Material in the Material Document (MSEG-MBLNR) get the CUOBJ value from the MARC Table. Input the MARC-CUOBJ in the CAWN-ATINN to get the ATWRT Value for the same.
Hope it was clear.
Thanks and Regards,
Venkat Phani Prasad Konduri
Edited by: Konduri Venkata Phani Prasad on Sep 9, 2008 6:15 PM

Similar Messages

Link b/w QALS and MSEG TABLE

hi,
i want to make a link up between QALS AND MSEG table as i want to those inspection lot which have the UD = REJECTED and stored in SC01 etc storage locations. Till now i am able to find that the Item which are rejected having material documents present in the MSEG table but not present in QALS.
I had tried to make a link up with fields such as MATRN,CHARG,KDAUF, KDPOS etc.. but the right data is not displayed in it.
Please provide me guidelines to solve this problem.

this i Functional question asked at wrong place .
but i will gice you the relation :
MSEG: Document Segment: Material
Fields:      MBLNR
     MJAHR
     ZEILE
Relation :
MATNR      EBELN     EBELP MJAHR MBLNR
QALS: Inspection lot record
Fields:      PRUEFLOS
can use this table also
QAVE: Inspection processing
Fields:      PRUEFLOS
                KZART
     ZAEHLER
rgds aryan
Edited by: Aryan@sap on Jun 4, 2009 8:21 AM

Tables MARDH and MSEG - daily stock position

Hi gurus of MM.
I'm from BW and posted a thread about data from MM:
Thread: 1876587
As I understand, I can calculate the stock for a given date directly from tables MKPF (field BUDAT) and MSEG.
MSEG has normal movement and also the initial stock value (posted as movement type: field BWART = 561), so this is possible.
But I still didn't understand what's the logic to fill the different types of stock: fields LABST (unrestricted), UMLME (in transfer), INSME (quality inspection), EINME (restricted), SPEME (blocked) and RETME (returns).
With MSEG I arrived to the total value.
Which is coherent with the values that I found in MARD and MARDH (the sum of these types of stock).
What's the logic to distribute total value among these types of stock ???
Thanks in advance.
César Menezes

Dear Amit
I'm looking for technical information.
But if you can also indicate some documents that explain the business rules I'd appreciate.
The technical question is:
Using tables MKPF and MSEG (basically fields BUDAT, MENGE and SHKZG) I can arrive to the values in tables MARD and MARDH.
But until now I can arrive only to the totals of MARD and MARDH (the sum of fields LABST, UMLME, INSME, EINME, SPEME and RETME).
The question is: what's the logic to arrive to each type of stock: LABST (unrestricted) and so on.
I'm doing this because I need a daily stock position.
MARD has a position at the moment, I can't use it to a report like: stock at day 10 plus movement of day 11 equal stock at day 11.
MARDH has a montly, not a daily position.
And I saw that I can arrive to daily stock position using only MKPF and MSEG.
Thanks
César Menezes

Please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

mohammed aljasim wrote:
there are many people that error is happened with them and one of this people is me ,, Apple must be find the solution for this problem
You are absolutely WRONG. Apple bears no responsibility in this at all. YOU purchased a STOLEN phone. You are guilty of receiving stolen property at best. Take it back to wherever you bought it and demand a refund. Failing that, turn it over to the police. You got ripped off. I'm sorry you wasted your money, but there is NOTHING Apple or anyone else can do for you. Only the rightful owner of the phone can unlock it.

Link between table BSEG and BSET

Helo All.
Can you please tell me what is the link between tables BSEG and BSET in FICO?
Regards

Hi
Please check below thread Ramesh answerd for same query
Relation between RSEG Table and BSET Table
Thanks,
Syf

HT2500 Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

Hi, I have a problem with my mac mail account. Its linked with my website and i've just transferred my domain and host plan to 123-reg.co.uk Now for some reason emails disappear from my inbox! Emails come in and then my inbox is empty.. Help!

Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

How can I link table KONV with table VBRP and VBRK using KSCHL field?

Hi experts,
How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
Thanks,

Hi,
If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
select-options: x_KSCHL for T685l-KSCHL.
select kwert
           kbetr
           knumv
           kposn
           kschl
      from konv
      into CORRESPONDING FIELDS OF TABLE it_konv
      FOR ALL ENTRIES IN it_all
      where knumv = it_all-knumv
      and   kposn = it_all-b_posnr
      and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
endif.
Hope this helps.
Regards,
Chandravadan

Can't see Manage Link to work with tables views and links

I have an Azure account linked to Office365, and a Pay as you go subscription; and have been working with SQL for a few months without any problem.    I wanted to move one of my databases to my own Azure account (not tied to our O365)
so I get a free trial, and then converted that to paid with my credit card.   I had someone help me move the database, but now when I look at it in the new account there is no "Manage" link at the bottom to open and see the tables, fields,
views, etc.     I don't understand why that isn't there. I can copy, delete, all sorts of things.   But I can't "manage".    any ideas would be greatly appreciated.

I checked with a college and he pointed me to another post on the same topic:
Clicking the ‘Manage’ button in Azure Management portal launches the SQL Azure Management (SilverLight) Portal in a new tab in the browser. At this time, we do not plan to support this SilverLight-based SQL Azure Management Portal with V12 databases and
servers.
We are working hard on an HTML-based T-SQL editor experience that will deeply integrate with the preview Azure Management Portal. Until then, we encourage customers to use Visual Studio Community 2013 which is a full-featured free version of Visual Studio
2013 to connect to Azure SQL databases for tasks such as running T-SQL, designing schema and for offline and online database development.
You can click the the ‘Open in Visual Studio’ in the database page in the Azure Management portal to launch VS2013 on your computer and easily connect to your SQL Database.
In addition, you can also use SQL Server Management Studio 2014 with CU6 to connect to Azure SQL Database. More details are on this blog post.
This posting is provided "AS IS" with no warranties, and confers no rights
I hope that helps,
Jan

Oracle Hint on Table MKPF and MSEG : force index MSEG~M to be utilize

Hi Experts, I'm quite new to ABAP performance tuning, I try to put details as much as I can in my question below, just to have a quick overview of my problem below, I want to use/force in my SQL below to force the utilization of index MSEG~M.
added an Oracle Hint forcing index MSEG~M
SELECT MATNR BWART MENGE
FROM   MKPF
INNER JOIN MSEG
     ON MKPFMANDT EQ MSEGMANDT
    AND MKPFMBLNR EQ MSEGMBLNR
    AND MKPFMJAHR EQ MSEGMJAHR
   INTO CORRESPONDING FIELDS OF TABLE T_MSEG2
WHERE MKPF~BUDAT IN S_GSTRP    "(index bud should be used)
   AND MSEG~MJAHR IN R_DOCYEAR
   AND BWART IN ('931', '932',
                  '901', '902',
                  '701', '702',
                  '703', '704',
                  '707', '708',
                  '711', '712',
                  '713', '714',
                  '715', '716',
                  '717', '718',
                  '551', '552',
                  '553', '554',
                  '555', '556') "ZZCHK: Constants Not Applicable
         AND MATNR IN R_MATNR3
         AND MATNR IN R_COMPNTS
         AND WERKS EQ P_WERKS
%_hints oracle u2018INDEX(u201CMKPFu201D u201CMSEG~Mu201D)u2019.
Note: I'm assuming that you'll take not some comments on further enhancement:
- " INTO CORRESPONDING FIELDS "
- use of field symbols
- I didn't modify it yet since my focus if for MSEG~M
- cannot make material number as mandatory field
Objective: Force to use index MSEG~M
Problem:
After adding the Oracle Hint, I did the analysis in ST05 and it seems like index M is still not being forcefully
utilize instead MSEG~0 is being used.
I replaced the Oracle Hint with:
%_hints oracle u2018INDEX(u201CT_01u201D u201CMSEG~Mu201D)u2019.
In ST05, I can get see that index MSEG~M is now being utilize BUT worst thing happened after applying this, the program timed out.
I already take a look on the following Notes: 129385, 130480, 772497, 162034, 818321 but nothing seems to be helpful in my problem.
Questions:
1. In syntax %_hints oracle u2018INDEX(u201CT_01u201D u201CMSEG~Mu201D)u2019. T_01 stands for MKPF right which is the first table, do you what's the reason for the program time out after adding this Oracle Hint? Is this the proper syntax?
2. How can I force in my code to use index MSEG~M without any program timeout?
For the whole source code of my question above, please see the link:
http://rapidshare.com/files/211740852/ZDXX0028.txt.html

Hi Thomas, thanks with the prompt reply (even if it's Saturday )
Yes, MKPF~BUD is being used.
The budat selection is narrowed to 28 days though users can input any date range, a warning message will just be displayed if budat selection exceeded.
Yes, optimizer usually chooses the right index; I'm not in as the same experience as you are though, but I find it interesting that after I added the Oracle hints (several combination) the performance of the program was optimize up to 40% to 50%.
I uploaded a detailed SQL trace and the ABAP change done in my program, if you'll notice in the summary of the changes, after adding some hints, the duration of the program was improved..
(SQL Trace Summary of my program) this worth taking a look
http://rapidshare.com/files/211870091/ZD28_SQL_Trace.zip.html
I made a custom index in MSEG, but unfortunately I doubt that it will be approve by our performance capacity team. But I somehow have a hunch that this will further optimize the program.
MSEG~Z03
MANDT     Client
WERKS     Plant
BWART     Movement Type (Inventory Management)
LGORT     Storage Location
What do you think Thomas and SAP experts?
**Sorry for pasting the whole ST05 result
     SELECT STATEMENT          ( Estimated Costs = 131.250 , Estimated #Rows = 450 )
                    6          FILTER
                    Filter Predicates
                    5          NESTED LOOPS
                    ( Estim. Costs = 131.249 , Estim. #Rows = 450 )
          Estim. CPU-Costs = 1.885.249.948 Estim. IO-Costs = 129.700
                    2          TABLE ACCESS BY INDEX ROWID          MKPF
                    ( Estim. Costs = 14.442 , Estim. #Rows = 288.570 )
               Estim. CPU-Costs = 206.401.140 Estim. IO-Costs = 14.272
               1          INDEX RANGE SCAN          MKPF~BUD
                    ( Estim. Costs = 655 , Estim. #Rows = 519.426 )
          Search Columns: 2
          Estim. CPU-Costs = 30.640.783 Estim. IO-Costs = 630
          Access Predicates          Filter Predicates
                    4          TABLE ACCESS BY INDEX ROWID          MSEG
                    Estim. CPU-Costs = 5.818 Estim. IO-Costs = 0
          Filter Predicates
          3          INDEX RANGE SCAN          MSEG~0
               Search Columns: 3
     Estim. CPU-Costs = 1.564 Estim. IO-Costs = 0
     Access Predicates          Filter Predicates

Link between table SOFFPHF and FI document

Hello Experts,
I have a requirement to find all the FI documents with the attachement .
We have a table SOFFPHF (SOFF: Files of Physical Information Objects) where i can get the details of attachement, But now how to link this table with the FI document which has this attachement.
I tried the link using table SRGBTBREL , But i am not getting entries from table SOFFPHF in this table.
Thanks.
Regards,
Ganesh.

Hi Shivkumar,
When you enter the item category as 'D'then a purchase order is
classified as a service purchase order.
When you use ML81N to perform a service entry, then automatically
the GR document is generated.The basis for this is a service can
only be performed and cannot be stored.
The PO history table will give you a good idea of the relation.
You can check the EKBE table.Enter the service entry sheet number
in the field LFBNR of EKBE table, enter the SES number, you will
see all the documents associated with it.

Link between table VBKPF and RSEG.

Dear FI GURUS n EXPERTS,
Will you tell me how can I link table VBKPF and RSEG.
Thanks in advance.
DSC

Hi
You can do it through ABAP program by applying LookUp technique for each *BKPF document (Creating a reference AWKEY variable, and applying concatenate *BKPF-BELNR and *BKPF-GJAHR), with the internal loop on RSEG through query (select single * from RSEG into itab_rseg), and append each to your desired result-set
I'm not sure if you can do it through SQVI and SQ02 infosets as *SEG documents cannot be used there.
Hope this helps
Regards
Nayab

Link beetween Tables IBIN and COMM_PRODUCT

Hi experts.
Can anybody explain me how i can retrieve a product in the table COMM_PRODUCT from a component in table IBIN ?
In transaction IB53, i see the component and products together but i need to define how the data is linked in database.
Or if somebody knows a FM to get the product with the component guid, it will be very helpful. Thanks for the help.

Hi,
Here is the link betweent the product and instance.
Pass IBIB-INSTANCE into the IBINOWN-INSTANCE.
IBINOWN-INSTANCE=IBIN-INSTANCE
you will get the details about objkey.
Pass this objkey into the COMM_PRODUCT-PRODUCT_GUID.
Regards
Srinu

EH&S: How to make a link between tables PA0002 and T7EHS00_ANA_HEAD

Hi all, I need to make an Infoset for EH&S and a I can't link tables PA0002 and T7EHS00_ANA_HEAD, i search values in tables an the values in the field PRNR in both tables are different. I need to know if there is a table that contains some reference of a the data of an employee so i can make the link an obtain the data of an employee. Thanks.
Edited by: Albio Vivas on Mar 5, 2009 4:16 PM

Hi Albio,
Check the compatability of the remote cube & edit Phrase Sets. You can display additional information for a phrase set by choosing Utilities - Administration Info. To display the phrase set-to-attribute assignment, choose Utilities - Attribute Assignment.
However, i suggest to go throught he links, which are helpful.
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/2871000a6c11d28a220000e829fbbd/frameset.htm]
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/8d/c8fa3a4dbdf428e10000000a114084/frameset.htm]
http://help.sap.com/erp2005_ehp_04/helpdata/EN/85/b70bdba5944cab8ed7967ec3aea807/frameset.htm
with regards,
mahesh

My iphone is linked with my pc and i want to use my laptop for the icloud

My iphone is linked with my pc but i want to use my laptop and connet via icloud HOW????

is your pc you mentioned the same as your laptop?
here's a link
http://www.apple.com/icloud/setup/pc.html

G/L accounts linking with sales tax and VAT

Hi gurus,
I want to link the G/L account with Sales tax and VAT for this wat i can do and where,plz help me, it is very urgent.
Regards,
Dharma.

there r four steps to link sale tax
step 1 go to OBYZ
Create tax procedure to your company code
step 2 Go to FTXP
step 3 Go to FS00
step 4 go to OB40
srikant

Link with table CAWN and MSEG

Similar Messages

Maybe you are looking for