LinkageError at Interface Mapping in Integration Repository

Hello,
I have created interface Mapping and when I test them in Integration repository, it gives the following error.
Please can anyone suggest on the same.
Thanks
vijaya
Messages:11:53:40 Start of Test
  - LinkageError at JavaMapping.load(): Could not load class: com/sap/xi/tf/_MM_Material_
  - java.lang.NoClassDefFoundError: Illegal name: com/sap/xi/tf/_MM_Material_
       at java.lang.ClassLoader.defineClass(ClassLoader.java:538)
       at java.lang.ClassLoader.defineClass(ClassLoader.java:448)
       at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:173)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
       at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.load(RepJavaMapping.java:130)
       at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:49)
       at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:75)
       at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:110)
       at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:141)
       at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:120)
       at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:51)
       at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:305)
       at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:266)
       at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:292)
       at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
       at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:118)
       at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
       at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
       at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
       at java.security.AccessController.doPrivileged(Native Method)
       at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
       at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:144)
11:53:40 End of Test

Hello Homiar,
Thanks for the Reply.
I am on SAP J2EE Engine/6.30.
Also, I a using j2re1.4.2_05 and j2sdk1.4.2_05. But I am still having the same error.
The above Java versions are on my m/c. Should the Java runtime on server also should be the same.
Please suggest.
PS: I am putting the same reply on my initial Query also. If u need to reply to that linkage, you can select the hyperlink above the message saying 'Reply to the message'
thanks
Vijaya

Similar Messages

  • Activating ABAP Mapping in Integration Repository?

    Hello Everyone,
    I am trying to activate the ABAP Mappings. I have followed the guide "how to use ABAP mapping in XI 3.0".
    But ABAP Mapping Type didn't appear in the List
    I have also cross-checked with this blog
    /people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
    I have tried a number of options(Probably all possible options):
    1. SLD Cache Refresh
    2. Refresh Properties from Administration console of XI
    3. Full Cache Refresh
    4. Restart of Integration Repository
    5. Restart of J2EE instance from SMICM
    6. Restart of Entire XI Server
    7. All types of Refreshes from Administrator Console
    Also SLDCHECK works fine
    I find the property in the 'All Properties' Menu of the of the Administrator console of XI , but it is not reflected in the drop downlist!!
    Any Other possible options or solutions.
    XI is on SP 16.. Does that have anything to do ??
    Thanking you in advance
    Satish

    hi
    of course michal
    I have already mentioned that I have followed the steps of the guide.
    and I do a lot of home work by myself  before asking a question
    any  more ideas.
    thank u
    satish

  • About Interface objects in Integration Repository

    Hi All,
       I want to know details about Data type enhancements & Context objects in Interface Objects.Please help me.
    Thanks,
    GOPI.

    Hi Gopikishor,
            _Context objects:_ Its nothing but  to access a  element payload of the message,in Simple terms,  X-Path expressions in the repoistery..
    Deeply Nested elements in the Message structure.
    Ex:
    <Header>
         <PurchaseOrgData>
                <Sender>
                       <PurchaseData> Goods</PurchaseData>
                 </Sender>
         </PurchaseOrgData>
    </Header>
    Define X-path for the above structure: \Header\PurchaseOrgData\Sender\PurchaseData\
    Once we can define the "Context Objects" we can use following situations..
    1) Receiver Determination: During the Receiver Condition in the Integration directory,
    2) Integration Process: During the processing business process depends upon content of message.
    Datatype Enhancement:
    http://help.sap.com/saphelp_nw04/helpdata/en/a5/04623c4f69b712e10000000a114084/frameset.htm.
    Regards,
    Sateesh N.

  • No interface mapping in Interface detemination

    Hi all ,
              while creating interface detemination Integration Configuration i am not able to choose any thing in interface mapping though i have created one interface mapping in integration repository .
    regards
    praveen

    Hi Praveen,
    Please make sure u have activated ur IM and MM.
    If yes then also check tht whether u have chosen the right pair of interfaces.
    If u have a udf in ur MM then check tht it is error free.
    Please revert back in case of issues.
    I hope this helps.
    Regards,
    Sumit

  • ID-Error: Interface Mapping Not Found

    Hi,
    While doing the test configuration in Integration Directory, i'm getting the below errors, after pasting in the payload area & after executing step by step:
    Sender Agreement
    Also, once when i'm adding message interface to interface mapping in Integration Repository, i'm getting the error as:
    "Message Interface does not exits on any software components"
    afterwards this error not came once again.
    Plsssssssss help me to resolve the same.
    Regards,
    Balaji

    Hi Balaji,
    try to do a cache refresh,using tools>>clear SLD cache.
    also see if message mapping and interface mapping have been created properly and activated.
    Check the following:
    --> The o/b and i/b interfaces in the mapping program are same as used to create the interface det. object.
    --> THe Interface mapping shld be active...
    Refer to the topics at the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/ef761a5ecfb1418b79896e10fe4c57/content.htm
    Reward points if this helps
    Regards
    Vani.

  • Message Mapping And Interface Mapping

    Hi,
    I have 2 software components.
    One is for sender and one is for receiver.I have created all the Data types,Message type and Message Interface fro sender in the first Software component and data types ,message type ,message interface for the receiver in the second software component .
    Now, in which Software component should i create Message Mapping and Interface Mapping?
    Thanks in Advance,
    mvk

    Hi,
    You could use the created Message type and Message interfaces in Sender as well as receiver software components for creating message mapping, interface mapping and integration scenario.
    Generally it makes sense to maintain the message mapping, interface mapping and integration scenario in receiver software component. The message mapping and Integration scenario is specifically based on the receiver end requirments, so its preffered on receiver software component.
    The sender side details could be reusable in case if you need those for another new receiver software component. If you maintain it in sender component, then that will lead to mix-up all the things on sender side even though its based on receiver end.
    I think this could help you.
    In PI7.1 now there is concept of Folders to maintain all the interfaces appropriatly and leads for reusability of existing objects.
    Please refer below links for more details,
    /people/thorsten.nordholmsbirk/blog/2006/07/25/structuring-integration-repository-content--part-1-software-component-versions
    http://help.sap.com/saphelp_nw04/helpdata/en/42/ed903cf6c4492ce10000000a114084/frameset.htm
    Thanks
    Swarup
    Edited by: Swarup Sawant on Jan 26, 2008 8:33 AM

  • Define Inbound Interface for Interface Mapping with Java functions

    Hi,
    we are developing an R/3-XI-ITK-SBO system. We realized our SOAP component as custom java functions and we installed it on ITK.
    We need to import and configure these functionality in XI because we need to reference to it when we define the Message Interface and the Interface Mapping in Integration Builder Design.
    Someone is able to tell us how we can import and configure these java function or definition in XI?
    Thanks in advance.
    Best regards.

    Hi,
    INBOUND:
    Step 1. EDI Subsystem creates an IDoc file from EDI Messages
    2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
    3. Data in Control Record is validate against the Partner Profile.
    4. IDoc is generated in Database and syntax check is carried out.
    5. IDoc file is deleted once file read.
    6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
    7. Check for Process Immediately.
    If NO
    Execute RBDAPP01 Program
    Else
    Read Process Code from Partner Profile
    Process Code Points to Function Module
    Application Document Posted.
    further help:
    check url
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/ale/configuration.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapdevelopment.co.uk/training

  • Integration Repository: Dependency Button for Mappings is disabled

    Hi experts,
    we are using SAP PI 7.0. When I open a mapping in Integration Repository and want to display the dependencies, the button (and some others) are greyed out.
    Do you have any idea why this happens ?
    Thanks in advance and kind regards,
    Jürgen

    Hi Surya,
    thank you very much for your reply. A very good idea and I've checked it, but unfortunately it didn't help. The buttons are still disabled.
    Kind Regards,
    Jürgen

  • No interface mapping in interface determination.

    Hi ALL,
    I am doing a simple File to File scenario. i have created all repository elements and activated them.
    Now while configuring them in Directory at interface determination level I can enter
    inbound Interface but in interface mapping i can´t see my Interface mapping object so i am getting error while testing scenario in Directory. 
    Can anybody tell me where exactly can be problem_
    Please note that i have created interface mapping object in repository.
    Thanks,
    Atul

    Hi Atul,
    After creating your business system or business service, click on your BS and include  the sender and receiver interfaces.
    Regards,
    Ramesh P

  • Interface Mapping Not Found in Integration Directory

    Hey guys!
    I'am getting this error in the test configuration part of the integration directory:
    "Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
    I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
    BTW,  I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
    Regards,
    Glenn

    The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
    Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
    When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
    :P

  • NO Interface Mapping found in the Integration Directory (Configuration)

    Hi,
    I've got following problem with PI 7.0::
    I have a Mapping Scenario designed in the IR. It works - using test function - there. If I go to the COnfiguration Tool during creating of the Interface Determination it doesn't find the Interface Mapping. The Sender resp. Receiver Interfaces are correct assigned to the Business Systems.
    - Sender Business System is a FTP Server, which contains the needed Sender Interface.
    - Receiver Business System is a SAP R3 System containing the RFC Receiver Interface.
    I had to change the Related Integration Server of the SAP Business System in the SLD. How can I be shure, that my PI System is syncronous with the SLD? How can i get the newest changes - BS, TS or SC - from the SLD updated to my PI?
    Thx in advance
    Michael

    Hi,
    You must make sure that you have correctly identified the interfaces in your interface mapping.
    1. Message Interfaces are correctly configured
    2. Outbound/Inbound Interfaces are correctly declared in Interface Mapping
    Otherwise, your interface mapping would not be found in the interface determination in Integration Directory.

  • Integration Repository - Message Mapping Dependencies Button

    Hello everybody,
    I have a problem in my message mappings, I have the dependencies button and the other buttons in this tool bar unavailable, but I can use them in a mapping template is there a reason for this and the others buttons in this toolbar to be unavailable???, thanks in advance.
    Regards,
    Julio Cesar

    HI,
    Please check your Java version which is installed.
    goto Help->Information in Integration repository.
    To download J2SE JRE use the following link
    http://java.sun.com/j2se/1.4.2/download.html
    Also enabled the option 'Objects are modifiables' in the Software Component version
    Thanks and Regards,
    Chirag Gohil

  • Mapping edited in Integration repository

    Hi
    can anyone let me know which all mappings are edited in integration repository
    regards
    jm

    Hi,
    XSLT is eidtable in IR.  The restriction is that the XSLT Structure has to be defined extrernly , jar created and uploaded in Xi. Import as Archive.
    The value -of Statements ( selects in XSLTs) can change in XI.
    Java : Develop you code using Eclipse of NWDI. 
    Implement the stream Transformation interface. 
    Create a JAR
    Import as Archive.
    Hope this clarifies the Doubt.
    Regards
    Abhishek

  • Pls send me PDF'S for Integration Repository and Mapping

    Hello All,
    I need to make presentation.
    Pls send me different PDF'S for Integration Repository and Mapping
    Regards

    Henry,
    I hope this will help you.
    http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d046c490-0201-0010-84b6-9df523cbca31
    raj.

  • Error in XSLT mapping TEST in the Integration Repository?

    Hi,
    I try to use imported .xsl file for mapping. I have configured the interface mapping using this .xsl file for transformation. But when I try to test the transformation in the TEST (bookmark), it returns as the result the same .xsl - the stylesheet!
    Is it a bug?
    Thanx, Peter

    What more, it doesn't work so only in the test... I used this transformation in the BPM process and it has produced the stylesheet as the result of the transformation... It doesn't seem as a bug...
    What is wrong?
    ...one more thing: detailed log of the transformation in the TEST shows NO WARNING!

Maybe you are looking for