Linked Dimension is P-C (Account type) and it won't process in consuming cube

Hi I have an SSAS 2008R2 cube with a Finance Account dimension (p-c with custom rollup). I want to create a linked measure and dimension structure in another General Use cube, but when I add the link and try to process the General Use cube I get an unknown
error.
Internal error: An unexpected exception occurred.
I have tried changing the Account type, I have tried creating a referenced dimension inside the Finance cube and exposed the Referenced dim in the General Use cube (which had no linkage to the facts on the dimension usage grid). Not quite sure - can I use
an Account type dimension in a linked dimension structure?
Thanks for any insight!

OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

Similar Messages

Define a DFF depending on account type and OU

Hi!
I am updating the standard payment format for Swedish BG payments and need to store an information in the DFF "Bank accounts" (AP).
However I need to have this DFF available only for the Swedish OU and only if the account type is "Supplier".
Any hint?
Thanks in advance!
//BR
Karima

karima plztel me naaaaaaa dff means wat!!!!DFF = Descriptive Flexfield

Skype account blocked and they won't unblock it.

I had this really old skype account, I believe I created it when they released skype, but I had like 7 contacts or less, and used it like once a month, sometimes once a year, I don't know. But I used msn messenger a lot, and my account was really old aswell, and when they merged it with skype, I had to merge my accounts, so that's what I did. but at that time, it was so complicated, you had like two contact lists, on the same software you could send messages as a messenger account, or a skype account, to messenger or skype contacts, and it was really not user friendly, it was impossible to use, even tried to clean my list, deleting duplicated entries, people i never talked to, but still didn't do it, so once again, I abandoned skype and went to facebook. so last year I went away and wanted to do a video call to my girlfriend, so we installed skype. I didn't remember what account name I should use, or wich password was correct, and for some reason my account got blocked. i'm not even sure that i entered a wrong password, but it got blocked anyway. when i tried to retrieve it, said i had to contact support and cmon, to reset your password you have to contact support???? no thanks, decided not to use skype again, and made a video call with facebook. but as of this week, I wanted to make a video call from my android phone, and decided to give skype another go, people told me that it was a good video app, so why not. and there was i trying to retrieve my password, when i ran through this form to fill with a lot of irrelevant information: if i "used credit card to pay for a skype service or if i used paypal." how the hell should i remember a thing i did once in my life and many years ago? i don't know if i used credit card or paypal, how should i know wich credit card i used? ok, next field: "what email address you provided when you registered." ok, when i registered my first skype account, or my messenger email wich i merged later? because i don't know what email i was using back when they launched skype, ffs. so i put my messenger email and procceeded. next question, when did i create my skype account (year AND month). again, my old account, or the one i merged later? and how the hell should i freaking now the year or even the month i created it??? was like centuries ago, cmon!!?! next question, "provide five names that are in your contact list." heck, I had hundreds of people on my messenger, wich i often deleted and replaced, and barely 5 or 7 contacts on skype, wich i never used, and when they merged, i reorganized my list, so i had no idea wich list they were talking about, or who was on it. next question, "what is the total cost of a recent order that you have made." you're kidding, right? next, on what date did you place the recent order (dd/mm/yy)? ... next, "please provide two phone numbers that you have recently called or contacted using skype." god, i tried to order a pizza once, and i called my mother another time, but how am i supposed to remember wich pizza place, and if i called mother at home, work, cellphone 1, 2, or what? jesus. I answered the other questions properly, but apparently they 'don't have enough information to retrieve my account" thanks microsoft. I really wanted to use that account, since it's linked with my microsoft email, wich is also my xbox live account, and some other stuff, and I don't want to have 2 ms addresses, but ok, i really needed to make a video call, so i tried to create another account. I was on my pc trying to solve this problem, so I opened skype website and clicked create account. luckily (or is it?) there was an option to create account with facebook, so that's what I did. and when I went to my phone to login, bam, no option to log in with facebook, and when you create an account that way, you just don't have a name or password to log in on your mobile. good job ms! thanks for ruining my day, and good luck beating apple, google or facebook when you keep treating your costumers like **bleep**.

I've recently noticed that my skype account has been blocked. I don't know what the issue is. I have the password, but it won't let me make calls. I have cash on the account too. But now it is requesting me to fill in forms. What year did I set up my account? 10 years ago or so, maybe 11, maybe 9, 8, 7, not sure. What card did I use to last put money on it.... not sure, it was about a year ago, debit or credit? Can't remember. But out of the 10 questions, I seem to have got one wrong, but it won't tell me which one. I have asked customer service for help, but the genius just asked me to refill in the form. I did again, same issue, something wrong (waiting for 24 hours for failure notification on both occasions) I've asked him to point out what is wrong, but genius refuses to. Honestly, a pathetic customer service experience. 0/100 score. Just some autogenerated BS from India. I've had to now set up an entirely new Skype account. So warning, if your account is blocked, don't bother with customer service. They are useless. Just set up a new account and forget about what ever cash is on your account. Thanks Skype!!

I set my Exchange account up and it won't connect to any of the other apps

I reccently set up my exchange email account on my laptop and I can get and send emails from the account, but the laptop won't let me connect the exchange account with my calender, contacts, reminders, notes, safari, facetime, or any of the other apps on my laptop. It always asks me for my password and when I put it in it still says it can't connect to the exchange account. Why won't it let me connect my exchange account to my laptop apps?

When ever I try and login to my exchange account on Safari it says it can't connect to the account to the account and to call the administrator, but then i tried tologin again and it worked. Anyway I then tried my contacts and it is still not working.

My account type and billing changed without notification!

I was given a promotional internet offer of Blast internet + TV with 12 mth of HBO promotional offer in late May. They said that even if I move my offer will stay. It did even after the move initially until I exchanged the set-top box (because my new place required different box due to different signal type). Now they changed it to Performance pro with TV with higher bills and slower internet speed without notifying me. They even did a new credit inquiry even though I've been their costumer for over 3 years. I talked for hours with a representative and apparently no one is able to change it back to my previous plan. I am so disappointed with the service.

Purchases are charged against the balance of the redeem gift card first.
If the balance runs out, any further charges go against a credit or debit card on file.
iTunes Store: Changing account information

"edge animate - exception error" (red box, red type) and app won't open

Hi,
I'm hoping someone can help me... I'm not quite sure how to go about explaining the situation, but when I try to open Adobe Edge Animate, this "Edge Animate - Exception" error box appears, (please see below) then the program quits unexpectedly. I can't make out what the words say as it has red type on a red background.
I have Uninstalled the program and reinstalled it, and the same error appears.
I'm new to this app so I have no clue as to how I go about resolving this issue.
I hope someone can help me, I know this is brief so please feel free to ask me any further questions.
Thank you in advance,
Tom

Hi Manigandan,
Thank you very much the problem is resolved, but instead of removing the folder, I placed it on my desktop and placed it back, I have given a more detailed explanation below. And no this is not the entire log on the crash report, it's rather long though.
I followed your instructions, and removed the '5.0.1' folder that was in the 'Edge Animate' folder and stored it on my desktop. It had no content at the time I moved it, like in the '5.0.0' folder in the image below:
I then tried to open Edge Animate again, and the 'Red Error box' didn't show up, however it crashed instantly with the same 'Quit unexpectedly' report.
So I put the '5.0.1' folder back in the 'Edge Animate' folder, and the contents just seemed to be there all of a sudden? (please see image below) and now the program launches fine.
I am still yet to start a project and see if that works ok whilst working on it, however I will inform you if it works fine or any further problems occur, but for now it is all ok.
Thank you very much for you help on this.
Kind Regards,
Tom

Link material type and item category.

Hi,
Can you brief me on how following setting in SPRO works?
Plant maintenance - Maintenance and service processing - Maintenance and service order - General data - Define default values for componenet item category
When i checked, this setting is to link item category with the material type and item category is defined based on the material type and maintenance plant. But what is the relation in term of the order type i.e. whenever i create any order with a specifica order type, the default item category should get reflected on the componenets tab of the order?
Is it possible?
Can you guide me how to do this setting.
Thansks

Hi,
Yes it is posible to make all order types item category mark as stcok item "L" as default value. Very well u can set it at following menu path under PM&CS Node
Maintenance and Service Orders
Functions and Settings for Order Types
General Data
Define Default Values for Component Item Categories
Ramesh

Acount type and Variance reporting on account member set up

Hi
Apologies if the question may seem obvious....
However we are planning on loading monthly actual data into our application from a flat file where revenues are negative and costs are positive. For reporting purposes within the application we need to switch the signage.
Therefore when setting up account members if i tag the account type as revenue or expense will this solve the issue?
Also would anybody know what the "variance reporting" field is used for
Many thanks

Hi,
Variance reporting is good when you report your data from FR or WA as these tools are financially aware of account types and settings in variance reporting.
When you set an account as expense in variance reporting declines (between versions, months etc.) in your data for those accounts are taken as a positive change and vice versa. On the other hand, reduction in non-expense accounts are taken as negative change.
Hence, when you create a report where you define conditional formating on variance field, increases can be shown green in revenue accounts and red in expense accounts.
You can give this a try in Web Analysis by creating a very simple report using Sample:Basic.
The other question you ask for can be done via a calculated field in FR or WA. Or you can create a reporting version in Planning where you can multiply expense accounts by (-1) and leave the rest as they are.
Cheers,
Alp

Time Balance and Account Type

According to docs, time balance are system-defined based on account type. However, I can set any time balance. And it not enfore time balance setting on app validation and deployment.
So, is any relationship between account type and time balance?

Hello,
Check this forum, see if that helps..
Time Balance is set to Last for EPMA Essbase application in Essbase Outline
The last post in the above thread might be helpful.
Thanks,
hyperionEPM
Please mark answer as helpful or correct for others to find it easliy.

Account Type for Rollup/Parent Nodes in Fusion GL Hierarchies

We are currently implementing Fusion GL. As part of creating reporting hierarchies, there is some unclarity around requirements for how to assign the Account Type field (Asset, Liability, Owner's Equity, Exp, Rev) for the rollup/parent nodes in the natural account dimension. Does the Account Type field impact any reporting or functionality when applied to a rollup/parent node? Or can they all be defaulted to one option?
Thanks.

Hello Vadim,
Thanks for prompt reply.
Can you please elaborate with an example.
I have a GL account no 4000 for AST and my parent node is NEWB
After loading master data I am getting ACCTYPE for GL Account No 4000 as AST but my parent node NEWB is EXP due to above mentioned mapping.
Do I have to map all my GL accounts and hierarchy nodes in my conversion file with respective ACCTYPE?
Regards
Gaurav

Change GL Account Type from Balance Sheet Account to P&L Statmt Account

Hi Experts's
We have mistakenly defined the GL account as type Balance Sheet Account type and Some postings are done on this GL, we need to change it to P&L Statmt Account, When we do that it's throwing message FH602, as below.
Change balance sheet control in spite of account balance
     Message no. FH602
Diagnosis
     You have changed the G/L account from a "balance sheet account" to a
     "P&L account" or conversely.
     The balance of the account is, however, not zero.
Procedure
     Check your entries.
     If the G/L account was already posted in the previous year, execute the
     balance carryforward again for the current fiscal year. (program
     SAPF011).
Please let me know the procedure to do this change, or do i have to run any report.
Thanks

HI
If you are mid-year please try this:
Balance sheet having 10000 credit balace
try to post like this manually
Balance sheet account dr 10000
to Profit and loss account 10000
now tick the Profit and loss account and reverse the entry
try this in test environment first
Thanks & Regards
Phaneendra

Account type "iCloud" not available on my iCal

I'm trying to sync up my iCal with my iPhone, etc. However, while I can put an event in iCal, it will not show up on my iPhone/iPad, etc. When I go to iCal>Preferences>Accounts>+>Account Type and hit the dropdown menu, the only options I see are "Automatic / CalDAV / Exchange 2007 / MobleMe / Google / Yahoo!" There is no option for "iCloud".
When I try to create a calendar under "MobleMe" using my apple ID, I get the following error message:
The server responded with an error.
Access to account “[email protected]” is not permitted.
The server responded:
“HTTP/1.1 403 Forbidden”
to operation CalDAVAccountRefreshQueueableOperation.
I know I'm using the correct apple ID and password. I'm running iCal 4.0.4. Any idea what's up?

No, I am using a G5 not I g3. I forgot to change it
What computers do you show under System
Preferences...>.Mac>Advanced...The following
computers are being synchronized using this .Mac
account?
***** This may be the problem!!
It only shows this one computer on the above question. On my wife it only shows hers. Is it supposed to show both? If so how do I add them?
Merle,
I do not know why it worked with the Address Book and
not the Calendar. That confuses me too
If so, you may want to ensure that you have Reset
.mac sync from all computers. Make sure that you have
backed up your database (iCal>File>Backup
Database...) As stated in the Reset article, "If you
sync between computers with different versions of Mac
OS X, try to reset the sync data from the computer
with Mac OS X 10.4, if possible." I am using the same systems: 10.4.6
What computers do you show under System
Preferences...>.Mac>Advanced...The following
computers are being synchronized using this .Mac
account? Are they all registered with a recent
synchronized date?
the date on my computer shows a sync today as does my wifes.
;~)
src="http://i15.photobucket.com/albums/a381/Ferdsky/Sm
allWings.png"

FI_Document Archiving - Account type life not reached (T071)

Hi,
This is related to archiving FI_Documnt. Few of the documents are not able to archive and the reason is Account type life not reached (T071). I have entered same number of retention dayes for account type and document type, that is too for all account type (*) and document type. My understanding is system first checks the header level retention i.e. document type and then moves on to check account level. If retention days are same for doc and account type, when document type retension reached why should I get mess as account type life not reached.
Could someone help me to understand what could be the reason.
Regards,
Shailesh

Hi Gurus
I'm in a project archive, I have a problem with FI_DOCUMNT, and set the days of Life Document / Account which exceeds the limit of days to archive, when I run the archive process sends me an error that life has not been reached, any ideas?
The year archiving is 2006.
Document Life 366
Life Account 366
release 4.7
Regards

Significance of Account Type EXP,LEQ,INC,AST in BPC- Need some valid reason

Hi,
I have a question why we need account type in BPC. Is there really any Business significance for maintaining Account Type ?
Account type LEQ, INC it behaves differently while load data/display data as sign change happens in SAP Back end. Major issue comes when you try to create a re-concillation report using BEX tool for LEQ, INC accounts in BPC and BI cube as you need to reverse the sign in BEX side for any calculation or any data match for INC and LEQ accounts.
My implication is : Is there anything wrong if we take all accounts as EXP account type because what data comes from other source/Input schedule remain as such for all accounts. There will be no Discrepancy/confusion of sign while in reporting in BI side or BPC side. You can follow normal calculation process if you have calculated any item in the report and does not bother about the account type and behaves same as the BI cube data.
Any idea or any issue if the above implication is implemented. I need some concrete reasons for the above issue as it create a extra headache/confusion in BPC impementation project.
Thanks
Debasisha

Hi Debasish,
Lets take a simple example. Lets say you have revenue as INC, sales as EXP and Profit as INC. You enter values from input schedule as below
Acct    Type    Value entered in IS      Value in DB
Revenue   INC   400                   -400
Sales   EXP     100                  100
Lets say Profit is the parent, then the values will be
Profit   INC   -300
In the report, you will see the data as 300 (since profit is of type INC).
However, if you keep all as EXP, then
Acct    Type    Value entered in IS      Value in DB
Revenue   EXP   400                   400
Sales   EXP     100                  100
Profit    EXP                             500
The above data, as you can see, is incorrect. Now, for making it correct, you need to put a formula for Profit as Revenue - Sales. This looks easy, however, will become cumbersome with more number of members.
Hope you got the idea now.

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

Linked Dimension is P-C (Account type) and it won't process in consuming cube

Similar Messages

Maybe you are looking for