Linked policies not copying to sysvol\domain\policies?

This problem started recently, and I have not been able to find any resolutions online.
This is a relatively new installation of Server 2012 R2 on a small network of about 25 PCs. I was able to set up a number of GPOs without issue, but all of a sudden, newly linked GPOs are not copying to sysvol\domain\policies. That path is accessible from client
PCs, but the folder itself (5C53E...) isn't created, and gpupdate is producing the error:
The processing of Group Policy failed. Windows attempted to read the file \\dominionair.local\SysVol\dominionair.local\Policies\{5C53EB48-F4BA-4763-8500-E05BB54E3AB4}\gpt.ini from a domain controller and was not successful. Group Policy settings may
not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled. 
Computer Policy update has completed successfully.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.
I AM able to add to existing GPOs and the settings update on client PCs, so this doesn't appear to be a permissions issue. Any idea where to start on this?
Thank you!

> /The processing of Group Policy failed. Windows attempted to read the
> file
> \\dominionair.local\SysVol\dominionair.local\Policies\{5C53EB48-F4BA-4763-8500-E05BB54E3AB4}\gpt.ini
> from a domain controller and was not successful./
Your sysvol replication is broken. Check NTFRS or DFSR eventlogs on all
DCs and then follow either
http://support.microsoft.com/kb/315457
(NTFRS) or
http://support.microsoft.com/kb/2218556 (DFSR).
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

  • Blackberry Link will not copy my transfer data to my z10

    The error message i receive is:
    "Data could not be copied to your device due to the following errors:
    - There could have been a problem with the device or connection during the restore. Verify that the device is turned on and connected. "
    Yes my Z10 is turned on and connected. And BB link was able to transfer data to from itunes earlier. 
    I'm trying to get my data off my BB Curve 8900. Someone please help.
    The error message displays right after i've clicked on the picture of my device. BB link show the message, "preparing to transfer data", then it fails with the above useless message. Oh and I've tried this on my Mac OS and Windows 7 OS (my OS's are setup on a Macbook Pro as dual boot).
    Thanks in advance  - Derek

    Hello dbess, 
    Welcome to the forums. 
    Please contact your mobile network provider and ask that your case be transferred to BlackBerry for investigation.
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Transfer Z10 contacts to Q10, link does not copy everything.

    I sued the Blackberry link to trasnfer the Z10 data to the Q10 but quite a few peoples numbers just show up with out their name.  Does anyone know what the problem is?  I have tried everything and I am tired.  I just want my Q10 to work like the Z10.
    Any help would be appreciated.  All the data and apps transferred fine, contacts seem to be a problem.  Could it be contacts that had "links" made? 
    Thanks.
    Solved!
    Go to Solution.

    i did use the latest Link, and upgraded Q10 to the latest OS available, but stil it says there is no device detected, please try to ensure that the device is on and connected.... this happen after the device is detected by Link and i press restore ...
    i gave hope on BlackBerry, what kind of company who releases products which is unstable unreliable (BB10) bugs everywhere, even the Link software is annoying didn't it occur to them thay MAYBE we wanna switch from Z10 to Q10 and MAYBE wanna switch back to Z10 and without loosing any of important data we have, ohhh not to mention, open chats also gone on every attempt switching devices...
    i'm back on OS7.1 devices now, i think if this company (RIM) keeps delivering products and no support at all like this, we are all gonna stop buying it right? they are basically sending away the old customers who needs the reliability of  BlackBerry as a smartphone to supports our jobs and bussiness, we don't care about games or even **bleep**ty apps on BB world, WE JUST WANT OUR DATA SAFE ON EACH TRANSFER OF DEVICES, AND PLEASE WHERE IS THE PROTECT FOR BB10 USERS?
    sorry i have to make it in capitals, i'm desperate

  • When at the "results" page of a search, clicking on "blue" link does not display webpage. Copying "green" urldoes.

    When at the "results" page of a search, clicking on "blue" link does not display webpage although url is shown in address bar. Copying "green" url, shown at bottom of a result, into address bar and hitting "enter" goes to the address and displays the page. Have tried different selections at tools/options with no change. Is there some other setting that needs to be changed?

    Sorry, this is bad reply. I wanted to write this reply to another question.

  • Copy Protection without DLT - Link does not work

    I'm trying to find out how I can protect DVDS with Encore. Or if anyone knows of reasonably priced software to do this. I see there is a link to something called, Protection without DLT, but the link does not work....
    Help!
    Jessica

    CSS keys are only licensed to replicators, player manufacturers, etc. so it is highly unlikely that there will ever be a free solution for creating encrypted DVDs.
    CSS encryption is worthless, by the way.  It has been compromised for over a decade.  There are more complex copy-protection methods available that work by creating malformed structures on the DVD meant to confuse "ripping" programs.  However, they are an additional cost from third parties and, more significantly, they run the risk of making your product incompatible with older players or with some computer DVD-ROM drives or software players. 
    Your replication facility can tell you which additional copy-protection methods they offer and what their cost is.

  • Files not Copied Error Message in BB Link

    Some of my iTunes music won't copy to my Z10. Here is the message I get:
    Files not copied to Blackberry-AD6F as they are protected by digital rights management (DRM) technologies: 4
    Midnight Bottle
    Realize
    Bubbly
    The Little Things
    Those are Colbie Caillat songs if you need to know!
    Any suggestions would be great!

    Hello Amber,
    Thank you for your question.
    Content owners use digital rights management technology (DRM) to protect their intellectual property. BlackBerry Link doesn't support audio files that use digital rights management (DRM) technologies.
    Thank you.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Can not copy links to other menus correctly

    When I try to copy a link to another menu, it does not copy just the link itself. Instead, it copies that target menu and all it's submenus, and pastes them into that menu. So when I past a link and then look at the DVD map, everything is repeated within another submenu. The problem snowballs from there. The help menu clearly states that when you copy a link, it only copies the link itself and that it will link back to the original menu, when in fact it is creating an entirely new menu. Does anyone have any idea what's going on ? Thank you very much for any input.

    Hello Micah,
    When you copy a button in iDVD you are copying that button's properties.
    For example: I have a button "Submenu 1" and that button leads to a menu with a movie inside called "My Great movie".
    I then click on the button "Submenu 1" and go to Edit > Copy and then Edit > Paste it pastes that button again.
    Both buttons lead to the same menu with the same movie inside of it (much the same way as an alias works in the Finder). The DVD Map view shows them as 2 separate menus with their own tree of items. However the actual files are not duplicated, simply referenced.
    You can check to see if content is being duplicated by going to Project > Project Info.
    In the "Media" section you will see a reference to every video / audio file used in the project.
    In this case of my project there is only 1 copy of the movie in the window: "My Great Movie".
    This means that rather than duplicating the files, it is making a reference (alias/link) to the original.
    Hope that helps.

  • Slow-link detection not working.

    Slow-link detection not working.
    In our branch office in Ethiopia we are experiencing some issues with the access to mappings. Our main office is located in the Netherlands. The Offices are connected with a VPN site2site solution.
    We map a home folder to H:\ (which is working).
    We map a Document share to L:\ (which is not working).
    We map a Programs share to X:\ (which is not working).
    All shares are DFS namespace.
    We have set the according GPO which results in the following reg keys:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\NetCache\SlowLinkParams]
    "\\\\DOMAIN.XXX.NL\\dfsdata"="Latency=32000"
    "\\\\DOMAIN.XXX.NL\\dfsdata\\Home1"="Latency=360"
    "\\\\DOMAIN.XXX.NL\\dfsdata\\Home2"="Latency=360"
    "\\\\DOMAIN.XXX.NL\\dfsdata\\ConcernData"="Latency=360"
    "\\\\DOMAIN.XXX.NL\\dfsdata\\Programs"="Latency=360"
    The detection says in the eventvwr (OfflineFiles)  says:
    Path \\ DOMAIN.XXX.NL \dfsdata\home1 transitioned to slow link with latency = 106 and bandwidth = 270472
    So the Homedrive is working.
    But when I try to access the DFS root I get:
    Windows cannot access "\\DOMAIN.XXX.NL\dfsdata
    You do not have permission to access....."
    And yes, the user has permission.
    So the L-drive and X-drive are not accessible.
    How come?

    Hi,
    >>Slow-link detection not working.
    Did we check group policy result to see if the policy setting was applied successfully? We can run command gpresult/v or gpresult/z to collect group policy result.
    Besides, instead of just focusing on slow link, this issue may be related to DFS namespace.
    Regarding this point, the following blog can be referred to for more information.
    Using DFS Namespaces and Offline Files
    http://blogs.technet.com/b/filecab/archive/2006/01/19/using-dfs-namespaces-and-offline-files.aspx
    Regarding how to troubleshoot DFS namespace problem, the following article and blog can be referred to for more information.
    How to troubleshoot Distributed File System Namespace access failures in Windows
    http://support.microsoft.com/kb/975440/en-us
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards,
    Frank Shen

  • Windows 2008- Account Lock not working and getting Domain Policy access denied

    Hi
    Windows 2008 Root Domain we tried to Edit the policy and we were getting the error "Access Denied on the Domain Policy template" we resolved by giving Write permission for authenticated user on the Template. later we applied account lock out policy.
    but it is not applying and automatically reset to 0 in account lockout tool.
    Error:"Access Denied:\\sysvol\Domain.com\policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Windows NT\SecEdit\GPTmpl.inf.Make sure that you have the right permission to this object.

    Hi,
    The error message is Access Denied, so it should be a permission issue.
    You mentioned that you tested the account lockout in isolated network, it was working fine without any problem, by which did you mean that you didn’t get the Access Denied error message, or account wasn’t lockout out?
    If you are facing account lockout problem, here are some troubleshooting articles below for you:
    Troubleshooting Account Lockout
    http://technet.microsoft.com/en-us/library/cc773155(v=WS.10).aspx
    Troubleshooting account lockout the PSS way
    http://blogs.technet.com/b/instan/archive/2009/09/01/troubleshooting-account-lockout-the-pss-way.aspx
    Appendix Two: Gathering Information to Troubleshoot Account Lockout Issues
    http://technet.microsoft.com/en-us/library/cc778156(v=WS.10).aspx
    Best Regards,
    Amy

  • I can't get download to work - it will not copy the mp3 file to my chosen location (as set in tools/options) - it gives me a new window with a player - no dwnlo

    I am running windows xp sp2 and I have set my dowload location under (tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my chosen location on my HD - instead, it opens up a new window with a makeshift "player" and begins loading the player with the MP3 file. The problem is that I have no idea where on my system firefox has copied this file to, so, I cannot leave and come back later and play this MP3 file using winamp. I have to listen to it right then or lose it - if I close that new window (with that puny little "player"), then I lose the download, wherever firefox put it on my PC (I got no idea where it is). This is all under firefox 25.0
    I am also running FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file I want, and firefox 12.0 (on win2k, sp4) downloads it to my chosen location (on my HD), and it gives me the download window so I can watch its progress and have some control over pause, and resume, and, when it is done, the download window offers me the option to "open containing folder" so I can make sure it got to where I wanted it. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox 25.0 on winxp sp2!!!!! What gives? I went through and set up my options for XP just like I did with Win2k and it all looks good, but firefox 25.0 just ignores my chosen location and always defaults to give me that makeshift player and I am not able to actually copy the mp3 file to my harddrive - it makes firerox 25.0 almost unusable since downloading mp3 files is a big part of my firexfox use - please help - I am not able to upgrade windows at this time, and, since firefox 12.0 still works fine on win2k, I can't understand what happened at firefox?

    Phillipp,
    I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
    Littleberry

  • HP LaserJet 1536dnf MFP will not copy or scan but does print

    My HP LaserJet 1536dnf MFP will not copy or scan but does print.  It does not matter if I use the ADF or the glass.  When copying or scanning I get a completey black page.  The light bar does move from one end of the printer glass to the other.  There are no connectivity issues as the printing function and the e-print function work fine.
    Thank you for your help

    Hi @akb3,
    I understand that when you try to scan or copy, you are getting a black page. I can help you with this.
    Please keep the scanner lid open and then press the copy button.
    Check if the scanner bulb glows.
    Check if the scanner moves freely across the glass.
    If it does not try connecting the printer directly to the wall jack and try again.
    Update the printer's firmware if the bulb glows and scanner moves freely. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
    If the issue persists, then I would recommend to call HP Tech Support for further assistance to see what other options are available for you at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Price and Pricing conditions are not copied to PO for a line item !!

    Hi
    I have created a PO w.r.t a PR which has only one line item.
    Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
    How do i rectify this error !!
    Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
    MaruthiRam

    What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
    please reply

  • Dashboard link is not working from BI Publisher

    Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.

    Please somebody guide me.
    Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
    Thanks,
    Vara

  • Excise values are not copying in my excise invoice

    Hi experts,
    When am doing factory sales with tranasaction code j1iin from billing  The excise duty is not copying into my excise invoice.  What could be the reason what needs to be done to run this scenario perfectly.
    excise invocie is generarting  with out value.  Iam working  ecc 6.0 version and taxinn procedure.
    Thanks & regards
    Rack29
    T

    Go through these threads
    [BED NOT FLOWING TO EXCISE INVOICE J1IIN   |BED NOT FLOWING TO EXCISE INVOICE J1IIN]
    [eXCISE INVOICE   |eXCISE INVOICE]
    [Excise Values Not Flowing in J1IIN-(export Excise Invoice) |Excise Values Not Flowing in J1IIN-(export Excise Invoice)]
    [excise values in exports   |excise values in exports]
    Though your issue relates to domestic, the above links is applicable to your issue also.
    thanks
    G. Lakshmipathi

  • After updating to V 15.0 I have the issue that suddenly many but not all of the functions do not work anymore. Menues and download links do not work.

    I have updated my firefox to version 15.0. After this I have the effect that at some unspecified time during use many of the functions stop working. Menu's do not open, download links do not work anymore and so on. Opening new tab's or windows still works. Links on pages partly work partly not. Copy and paste does not work anymore on webpages. It takes ending the firefox process and restarting to correct the issue until it happens again. I have those effects on totally different webpages. At this time it happens every time after I start Firefox but not right away. Firefox first works for some time and then it suddenly doesn't anymore without me having done anything special

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

Maybe you are looking for