Linked project not opening in current window

I built several projects and one links to another on the last
slide of each project. I embedded the first project into my course
window in my LMS and it plays it that window just like I want, when
it gets to the last slide it starts the next project like it
should, but in a new window, rather than in the current window. I
have specified to open the new project in current window on the
last slide of the previous project, but still opens a new window.
My LMS will not use the HTM file, so I am using the swf file
directly with the skin. Does anyone have any suggestions?

This thread has been cross-posted to two different forum
categories. Please direct any replies to where the thread first
appeared. You may do this by
Clicking
This Link

Similar Messages

Pdf links will not open in ie8 windows 7

I have installed, uninstalled Adobe Reader 10 and Internet Explorer. I have tried all the solutions listed in some other posts. PDF links will not open the files on some web sites, Fidelity.com in particular. I have reset IE8 Advanced Options and Advanced Options Reset, Created another Windows Administrative user, performed clean boot in Windows and run IE8 (no addons) from the accessory menu and unchecked the Display PDF in Browser box in preferences. None of these options have resulted in correcting the problem. Adobe Reader 10 works fine on the Fidelity web site in Firefox.

Hi All,
We have had a few bug reports related to Adobe Reader X protected mode coming in from you in this forum. We have addressed a large number of them in our upcoming Reader update and we would like to hear your feedback.
To that extent, we would like to invite you to the Adobe Reader Prerelease program and try out the latest build. To participate, please fill in the form available at https://www.adobe.com/cfusion/mmform/index.cfm?name=reader_prerelease_ interest and indicate Adobe Reader as the product of your interest.
We look forward to your active participation, feedback and help towards making Reader a better product.
Thanks and regards,
Adobe Prerelease Team

Project wont open in current window

I built several projects and one links to another, I embedd
the first project into my course window in my LMS and it plays it
that window, when it links to the next project I am calling up it
launches, but in a new window, rather than in the current window. I
have specified to open the new project in current window on the
last slide of the first project, but still opens a new webpage. My
LMS will not use the HTM file, so I am using the swf file directly
with the skin. Does anyone have any suggestions?

Hello Rick
Thanks for that. I probably didn't explain myself very well.
I am happy with the exe files opening in different windows it is
the html files that is the problem. The three menu files are all
html files and it is when moving between these that the multiple
window problem arose. I say 'arose' because following my message I
went back to try yet again and found that if I put all the files on
the CD without any being in a folder AND in the Advanced dialogue
box of the Text Properties - where the Link is defined - clicking
on the 'Apply to All links' button, then the menus actually open
using the same window; or at least, the sub menus do, the Main menu
window remains open with the Main menu in it. I have spent so long
messing around with this that I am going to have to settle for that
outcome I think.
All very confusing really!!
John

Linked Projects Not Opening

Some background first... I am working in Captivate 2
developing an elearning tool for my company. This tool will be
delivered through the SCORM 1.2 LMS system our company uses. I am
new to Captivate and have spent 4 weeks on this project.
I have nothing to do with the LMS administration, I am only
developing the tool in Captivate, then I will submit the SWF file
to our LMS administrator.
Well, I am remote so I have been developing these projects
and uploading the SWF file to the Adobe Connect Enterprise Server
in order to provide a link for my end users, so they may review and
submit changes back to me. It has all worked flawlessly and after 4
weeks I am done developing getting ready to record audio and have
run into a snag. Up until now I have been sending them the project
in TWO Parts (TWO Captivate Projects). Lets say Part I and Part II.
I have set the Project End preferences to open Part II in the
Curent window, so the user is just redirected. When I publish the
project to open the Part II SWF file, Part I runs, but Part two
will not open? I have tried everything I can think of, and I get
redirected back to Adobe Connect Enterpise saying file not found.
Then I tried linking the Part II HTML file (instead of the
SWF zip file) and it does work, but that is only because it is on
my computer and the HTML defaults to my harddrive. When I upload
the file to Adobe Connect enterprise and run the URL, Part II still
will not come up, but no errors, it does not even look to try to
open something. I also tried to include all of the Part II zipped
files in with the Part I files, by zipping them together and
uploading in to Adobe Connect Enterpise that way, and that did not
work. What do I need to do? How do I make sure the output file has
all that it needs to get the content to open as it is set up?
Mel

I'm not sure how to resolve the problem.
The reason for the issue, however, may be that when you make
a Captivate
file SCORM compliant, it makes assumptions about the file;
such as when
it ends, it's complete and may send that status to the LMS.
Even if that doesn't occur, if you have scored interactions
in the
lesson, I'm not sure how the second file's interactions will
coexist
with the first. There's a chance, I think, that the second
file's
interactions will overwrite the interaction results and score
of the
first file.
In short, I don't think what you're trying to do is a good
idea (if even
possible) with the SCORM requirements you have and
Captivate's fairly
limited customizing capabilities (you can't tell the first
file to 'be
aware' of the second file).
So barring any other solutions (which there may be?), I'd
stick with
delivering one file for each lesson - which is a better
approach IMO
anyway, using the LMS as the 'menu'. Or, if you must deliver
them
together, I think you'll need to invest time into integrating
them into
an overall 'shell' program that can gather the two lessons
scores and
send them cumulatively to the LMS, as well as negate any
'finish' LMS
command the first file may send and any 'initialize' command
the second
file would send.
HTH
Erik
mel4_marrev wrote:
>
>
> Some background first... I am working in Captivate 2
developing an elearning
> tool for my company. This tool will be delivered through
the SCORM 1.2 LMS
> system our company uses. I am new to Captivate and have
spent 4 weeks on this
> project.
>
> I have nothing to do with the LMS administration, I am
only developing the
> tool in Captivate, then I will submit the SWF file to
our LMS administrator.
>
> Well, I am remote so I have been developing these
projects and uploading the
> SWF file to the Adobe Connect Enterprise Server in order
to provide a link for
> my end users, so they may review and submit changes back
to me. It has all
> worked flawlessly and after 4 weeks I am done developing
getting ready to
> record audio and have run into a snag. Up until now I
have been sending them
> the project in TWO Parts (TWO Captivate Projects). Lets
say Part I and Part II.
>
> I have set the Project End preferences to open Part II
in the Curent window,
> so the user is just redirected. When I publish the
project to open the Part II
> SWF file, Part I runs, but Part two will not open? I
have tried everything I
> can think of, and I get redirected back to Adobe Connect
Enterpise saying file
> not found.
>
> Then I tried linking the Part II HTML file (instead of
the SWF zip file) and
> it does work, but that is only because it is on my
computer and the HTML
> defaults to my harddrive. When I upload the file to
Adobe Connect enterprise
> and run the URL, Part II still will not come up, but no
errors, it does not
> even look to try to open something. I also tried to
include all of the Part II
> zipped files in with the Part I files, by zipping them
together and uploading
> in to Adobe Connect Enterpise that way, and that did not
work. What do I need
> to do? How do I make sure the output file has all that
it needs to get the
> content to open as it is set up?
>
> Mel
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

PDF in Frame - Open Web Link does not open in new window

I actually have 2 problems.
1. Acrobat 7.0.9. Added a link to open a web page. When the pdf is viewed from within a frame on a web page, the web page link in the pdf does not open in a new window but replaces the pdf in the frame.
2. If I download the pdf to my workstation and open it and click on the link, it does open in a new window BUT opens up 2 browser windows where the 2nd one opened is blank (yes, I am single clicking on the link)
Issue 1 occurs in both IE 6, IE 7 and Firefox ?.??
Doug

Try Ctrl-Y for preview.

Links will not open in new window from iPad but work in IE on desktop.

I am trying to set some links to open in a new tab but for some reason they just keep opening in the original tab. External links work fine but when I try to make another page from my website open in new tab, it will not work.
I have looked at the code and it all looks fine.
<a class="nonblock nontext shadow rounded-corners clearfix grpelem" id="u105617-9" href="metro_tweets.html" target="_blank"> Metropolitan Region TWEETS</a>
I have also ticked the box that says "open the link in a new window or tab".
Any ideas what the issue could be? It has worked before so I am sure it can be done.
Would it have anything to do with the site hierarchy?
Cheers
Garry

Hi Aish,
Thanks for the quick reply.
I had a feeling you would ask me those questions so I'll give you a bit more background of what I am doing.
I have created a locally accessed web app as part of project I am working on at Universty. It is a mockup of an iPad app that I will eventually build, although it is fully functional in it's web app state. For this reason it is not hosted on any web server but instead transferred to the iPad via DiskAid and accessed from Mercury Browser.
Mercury browser is the only browser that I have found that can display html files from within it's own file storage and make it look like it is being served from a server. Safari browser will not let you do this and the only other browser that I found that could do it has been discontinued (Terra Browser).
Adobe Muse has been fantastic for doing this kind of work and as I said before, the internal links opened in a new tab with Mercury Browser previously, so I am not really sure what is going on.
Any ideas would be appreciated.
Cheers
Garry

Quick link does not open in new window

Hi all
I created an URL iView and assigned a quick link to it. The "launch in new New Window" property is set to
"display in separate window".
If i call the quick link url the iView is not shown in a separate window, but in the content area. Why?
If I click in the portal on that iView, it opens in a new window.
What am I missing here or is it a portal bug?
Thanks for your help.
Paul

Hi Paul,
I face the same problem, any findings so far?
Thanks!
Best regards,
Sandra

Pdf links will not open in new browser window

I have created a pdf document in Acrobat 9 Pro that is password protected. You must enter the password to open it. In this document there are perhaps 15 links to other pdf documents. I set up each of the links to open in a new window. The links work as expected in Acrobat, each opening in a new window, however, when I posted the documents to the web, the links open in the same window as the original document. This would not be a big issue if the original document were not password protected, but each time the user clicks on a link, it takes him out of the original document. To get back to the original document requires re-entering the password. This is a major irritation with so many links.
I know that you can set Acrobat to display the documents in its own window rather than in the browser, but my users don't know that. Control clicking on a pdf link does not open it in a new window as it would with an HTML link. Is there a simple fix to this problem that does not involve user intervention?

Well, I came up with a solution, thanks to Ted Padova who offers a simple JavaScript solution on his blog at http://www.acrobatusers.com/blogs/tedpadova/opening-pdfs-new-browser-windows.
The solution is clearly laid out even for beginners, if you know how to create a link or button.
It seems to me that a prime objective of Adobe in developing Acrobat would be to have it behave the same way in free-standing mode and as a plug-in. In this case it does not, and obviously, it has not for the last forty-eleven years that Acrobat has been on the market. Maybe some day they will get around to a fix for this obvious problem. In the meantime, read Ted's blog and be happy we have guys like him who can solve these problems.

New links will not open in a tab, only in the main window

with firefox 21, links will not open a new tab, only in the main window. I have set the option for tab opening, but it still will not work

Did you installed ASK toolbar?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
 To Enable SafeMode 
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Left click on a link does not open the link; a small blue window opens saying loading then closes.

Left click on any link in a web page does not open the link. A very small blue window appears with the word loading and a few moving dots. In a few seconds the blue window closes but the link does not open. Links used to open. If I right click the link, I can open the link in a new window. Many new windows pile up. This is a nuisance.
I am using Firefox 3.6.8 for Canonical 1.0 in Ubuntu 9.10.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Links not opening in new window

I have everything set properly, but the links will not open in a new window, even though the box is checked. What could be causing this. It is very important that some particular links open in a new window. Website is adstreet.com and the link is the Apparel & Specialties link. Any ideas?

You're referring to these links at the bottom, correct?
HOME • ABOUT US • PORTFOLIO • CLIENTS • TESTIMONIALS • APPAREL & SPECIALTIES
Use the text tool to select whichever text has links you want to have open in a new window, then click on Hyperlink in the Control Strip and check the box for "Open the link in a new window or tab".

Aggregator exe project not opening another project

aggregator exe project not opening another project when published.
The same works fine in HTML.
I tried in Captivate 7 and 8 as well.

I'm having a similar issue. I've used a "home" button to return to the main menu of the course. However, all it does is return me to the last screen I was on. I've tried linking the button to a the aggregator htm and to the swf. Neither gives me the results I want. I currently have it set to open in the current window. However, I get the feeling that it's automatically invoking a bookmarking feature and I'm not getting the pop-up box asking me if I want to return to the last screen or not.

Mail links do not open in Safari automatically

Problem started today, when I click on a link in an email, the link does not open in Safari, repaired disk permissions, restarted mail and safari, Safari is the default browser, restarted MacBook Pro a few times, not working. Any ideas?
Cowboy Bill

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

PE 13 - Project not compatible with current version of premier elements

I have PE 13 (recently installed on a system that also has PE 10)
I archived in PE 10 to a location, openend up the project with PE 13 and it appears to open just fine. I then save and close it and try to open it up a 2nd time and it fails with the error: "Project Not compatible with current version of premier elements"
I attempted to move all the media outside of the "Copied_XXX" folder per the troubleshooting steps, but it still fails even with all the media in a different location. Funny thing is that it knows about the media still because it appears in the loading content status bar at the very bottom left of the screen. it completes all 600 or so loads, but they are definitely not on timeline or listed in project assets.
Windows 7 Professional is the OS.

stegeler
There is no guarantee that a project created in an earlier version will open in a later one. The classical recommendation is to finish a project in the version in which it is created.
If you do want to try to edit the project created in the earlier version in the later version, then make sure to work from a copy of the original. Once you edit the project created in the earlier version in the later version, you cannot go back to edit the later version edited project in the earlier version.
If you have your Premiere Elements 10 project archived, then you do not want to go moving copies of the project's source media outside that Copied Folder. The copy of the project file in that folder needs to trace back to that copied media in that Copied Folder. What you are seeing in Premiere Elements 13 is probably conforming of audio and video files, processing of rendered files, and such, maybe even some indexing. You do not want to proceed in Premiere Elements 13 until you do not see any further activity in the progress bar at the bottom right of the workspace. Have Premiere Elements 10 and 13 been on the same computer?
How did you open the project file in the Copied Folder - right clicked the project file, Open With, and then selected Adobe Premiere Elements 13? What is the duration of the Timeline of the original project in 10?
Have you been working with a copy of the Copied Folder and its contents?
More on this in the morning.
ATR

Published iMix will not open iTunes in Windows Vista

Hello,
I have an issue wherein when I click an iMix link to get to an iMix that someone has published on their website, the link does not open my iTunes store, as it does on another pc running Windows XP. Instead, with Vista, it brings up a window that says "do you want to save this file, or find a program online to open it." Neither choice gives me any resolution.
I'm sure it is a security setting somewhere in Vista, but I can't seem to find it. Any help would be greatly appreciated!!
Thanks,
Tara

Karlluch...
Try here > iTunes for Windows: "Error 7" message when opening iTunes

Linked project not opening in current window

Similar Messages

Maybe you are looking for