Linked Smart Object: Allowed File Type and Editor

Please forgive my lack of knowledge. I'm evaluating PS CC 2014, own PS 5.1 and am a hair shy of being a novice. Presently I'm doing Photomerge Focus Stacking. What I'm hoping is that DNG files can be Linked Smart Objects and that I can modify the merged photo by editing the DNG files in Adobe Camera Raw. Is this possible? The Adobe Help article has a rather cryptic "You can’t perform operations that alter pixel data", that leads me to believe no but, I don't understand that fully.
Thanks.

Currently you can not use any of the merge options: pano, hdr, or focus stacking with a smart object. So you would not be able to do that with dng files and retain the ability to edit them in Camera Raw. It would be nice though!

Similar Messages

Linked Smart Object breaks a PSD after sync with Creative Cloud

After using a linked Smart Object inside a PSD and sync with Creative Cloud, the online version of file does not preview and does not work with any online feature, like Extract, Layers, or Anything else.
Any suggestion? Thanks in advance.

Thanks for the example Deryck,
The preview seemed broken on the comments tab but the image was appearing for me under the Extract one. When I downloaded the original it looked like the linking was preserved. The online version didn't seem to denote in any way that the Cecinas layer contained a Linked Smart Object, which might be helpful, but it did have the preview. Here are some screenshots of what I was seeing. Thanks for posting about it. I'll pass it on to our engineering department.

Linked Smart Objects - File Size Question

Hey guys,
first time using linked smart objects and I was pretty excited about it at first. I have a large photoshop file with 1920x1080 image assets. The file size is about 1GB and everytime I make a minor change the entire file has to be re-uploaded to my Dropbox.
So I figured that I could make all these image assets linked smart objects so that I can keep the master file down in file size since most of the actual assets don't change. However, even the PSD that contains nothing by linked smart layer objects is already 400MB large. And that's in addition to the external PSD's it is now linking to.
Even if I duplicate a linked smart layer object in this PSD file it increased the file size by an additional 10MB per duplicate. Is this supposed to happen? Why does it take so much space to just link to external objects? I was super excited about using linked smart layer objects but this doesn't look like it would be helping much to decrease file size.
Any thoughts would be much appreciated!
Thanks,
Philipp

Hey Chris,
thanks again! I guess I just had different expectations. In my mind I was going to see a parent file around 10MB or something with all of the content being dynamically loaded from the linked smart objects.
Maybe that could be a feature requests for future versions.

I dropped in 2 photos as a side by side (a before and after shot) in Pages. I went to upload it on a website, but said: not an allowed file type. I converted it to a pdf, but that didn't work either. Is there a way to convertPages doc to a jpeg?

I dropped 2 photos side by side (before and after shot) in Pages.
When I went to upload the photos on a website, message said
"Not an allowed file type". I then converted the Pages document into a PDF,
but that didn't work either. Is there a way to convert it to a JPEG? I didn't see
that as an option on scroll bar.

Hi iris117,
Welcome to the Support Communities!
One thing you can do if you can't just upload the photos individually, is to take a screen shot of your Pages document. Here's how:
OS X Mavericks: Take pictures of the screen
http://support.apple.com/kb/PH14212
Cheers,
- Judy

Open as linked smart object

Hello,
iam looking for a solution to open files in a folder
and copy then into a document.
Its working good, but i need the files to be linked smart object.
Anyone knows a solution ?
Here my Code so far:
See in line 33. Convert to smart object: ?
var file = new File('C:/User_MY PATH.PSD'),
docRef = open(file);
// Use the path to the application and append the samples folder
var samplesFolder = Folder('C:/USERS_MY FOLDER');
//Get all the files in the folder
var fileList = samplesFolder.getFiles()
// open each file
for (var i = 0; i < fileList.length; i++)
// The fileList is folders and files so open only files
if (fileList[i]instanceof File)
open(fileList[i])
// use the document name for the layer name in the merged document
var activeDocName = app.activeDocument.name;
var targetDocName = activeDocName.substring(0, activeDocName.lastIndexOf("."));
// Copy the Document
app.activeDocument.selection.selectAll()
//convertToSmartObject(); THIS ISNT WORKING - CONVERT IT ?
app.activeDocument.selection.copy()
// don’t save anything we did
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES)
//Select specific layer to paste the copy, this is to make sure the layers are in a specific position
var doc = app.activeDocument;
doc.activeLayer = doc.artLayers.getByName("bgr");
//Paste Document
app.activeDocument.paste()
app.activeDocument.activeLayer.name = targetDocName

Use scriptlistener:
var idPlc = charIDToTypeID( "Plc " );
    var desc2 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
    desc2.putPath( idnull, new File( "C:\\Photos\\myPhoto.psd" ) );
    var idLnkd = charIDToTypeID( "Lnkd" );
    desc2.putBoolean( idLnkd, true );
    var idFTcs = charIDToTypeID( "FTcs" );
    var idQCSt = charIDToTypeID( "QCSt" );
    var idQcsa = charIDToTypeID( "Qcsa" );
    desc2.putEnumerated( idFTcs, idQCSt, idQcsa );
    var idOfst = charIDToTypeID( "Ofst" );
        var desc3 = new ActionDescriptor();
        var idHrzn = charIDToTypeID( "Hrzn" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc3.putUnitDouble( idHrzn, idPxl, 0.000000 );
        var idVrtc = charIDToTypeID( "Vrtc" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc3.putUnitDouble( idVrtc, idPxl, 0.000000 );
    var idOfst = charIDToTypeID( "Ofst" );
    desc2.putObject( idOfst, idOfst, desc3 );
executeAction( idPlc, desc2, DialogModes.NO );

Linked Smart Objects

When you send a PS file which has a linked Smart Object to a print vendor, will you need to send the linked Smart Object file as well?

That's what I was afraid of. As a print vendor AND a designer I'm concerned that word has not gotten out that linked objects will need to accompany the file and we will end up dead in the water when we need to open up a photoshop file with a linked smart object. This is a relatively new problem for Photoshop, although InDesign and even many Illustrator users know that links need to be sent. In fact, we're seeing the opposite trend in InDesign, where artists are embedding artwork in their InDesign file rather than linking, which has both pluses and minuses.
Thanks!

Convert an embedded smart object to a linked smart object

Hey guys,
love the new "linked smart object" functionality. However, I can not figure out how I can convert (or export) an existing embedded smart object to a linked smart object.
I have a huge photoshop file with several embedded smart objects that I would like to break down into a lightweigt photoshop with with links to the varios smart object photoshop files.
Is there any way to do this?
Thanks,
Philipp

Thanks a lot guys.
I am just now putting a document together with linked smart objects and I'm noticing that the file size of the PSD file still increases quite a bit. I thought the hole point of this was to have lightweigh psd files?
I currently have 11 1920x1080 linked smart object files in the PSD and the file size is already at 140MB. Any ideas why this is happening?

How do I disable linked smart-object auto-update/refresh?

Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex. This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
How do I disable linked smart-object auto-update/refresh?

If you do not like a feature like smart objects there is nothing forcing you to use it. Use some other features to do what you want. Please don't ask Adobe to introduce bug into smart object support.
You could work on your bump maps textures in external files. When your done some time in the future you could edit your project with the smart object layer and use replace smart object. Only then will all smart filters be applied to the smart layer with the replaced smart object.
Or if by CC Auto save Layer you referring to CC Generate feature you can disable that feature.
I have no idea what your referring to when you write "CC auto-saves the layer" being a feature. I know CC Generate will write layers out as web files but that more a Web feature then a 3d feature. Where do you see your layer being saved?

Linked Smart Objects from Photoshop CC

Hi
I have a Photoshop file which makes use of the new Linked Smart Objects (introduced in the last major CC update). If I create a Reflow Project out of this .PSD the Linked Smart Objects are not being converted.
Am I doing something wrong or is it simply not implemented yet?
Cheers

If that's the case then keep the main grid container at 100% and then just add two boxes inside it. The outer one also stretch to 100% and have the inner one stop on column on either side and set the max-width on that. You could also just have the inner one strech to 100% with a max-width and have the underneath one show on the side only when it get really wide. I know it feels a little akward to use the grid like that, but we only have one container that the grid is on right now so this is what we can do. Here's an example using yellow for the outer container and red for the inner.
Hope that helps and thanks again for using Reflow!
Chris

Smart Objects between Photoshop, Illustrator and Dreamweaver while managing the version in Vesion Cu

Ok, so the title of this post sounds confusing. First off, I created a graphic in Illustrator CS3. It is to be used on a web page created in Dreamweaver CS3. I want to be able to streamline the editing process by using the Smart Object linking feature between Dreamweaver and Photoshop CS3.
Obviously, the problem is, I cannot link the Photoshop source to Dreamweaver because the source is not a Photoshop file, it is in Illustrator. The obvious solution to that is to export the Illustrator file as a Photoshop file. The problem with that is, I want to maintain the source in Illustrator and make edits in Illustrator.
So, my solution was to place the Illustrator file in Photoshop and make the Illustrator file a Smart Object in Photoshop. Then link that Photoshop file to the Dreamweaver page. So, basically, Photoshop is just the link between Dreamweaver and Illustrator. It works well! I click the little edit button in Dreamweaver abd it calls up the file in Photoshop. Then I double-click on the Smart Object layer in Photoshop and the source comes up in Illuistrator.
Now, here is the problem. To add to the confusion, I maintain versioning in Version Cue. So whenever I change the Illustrator file, I check it in to Version Cue. The Illustrator file I linked to in Photoshop is the local file on my computer. This file is syncronized with the version of the file that gets uploaded to Version Cue. This may sound complicated, but to see how I did it is pretty straight forward.
My assumption was, when I double clicked on the Smart Object layer in Photoshop, I would get the local copy of the Illustrator file to edit. But, that wasn't the case. Problem is, I got a temp file of the Illustrator graphic and NOT the original source file I linked to in Photoshop.
I can still edit the temp file and have those changes automatically made in Photoshop and then update the image in Dreamweaver. BUT, when I got to check in the new edits of the Illustrator file to Version Cue, it wants to create a new file and not rev-up to the new version of the original file. That's because the file I'm checking in is NOT the original file, it is a temp file.
Does anyone else use a workflow like this? If so, how do you do it?

Ok, so far I have come up with this solution. Usually after editing the Illustrator file I would check it in. But, as mentioned, I can't just do that because the file I'm editing is the temp file and not the original file syncronized with Version Cue.
So, instead of using Check-In when I'm done, I can use Save As... I can then overwrite my local file that is syncronized with Version Cue. That will save the new file as the correct name and automatically check it into Version Cue as the next version of the correct file.

Can you extract higher resolutions from Smart Objects or Linked Smart Objects?

When I am designing at 1x resolution, can I extract assets from smart objects or linked smart objects for 2x or more? If so, how do they scale up?

Yes with caveats.
PSD and Illustrator smart objects are also re-rendered and smoothly scaled to the requested resolution.
Other smart objects (including those with filters) are only scaled up from the resolution they are at within the Photoshop file. If you want them to re-render, you can paste them at 100% resolution into a linked smart object and get the smooth scaling.

PS CC 14.2: Linked Smart Objects workflow

I like the idea of the Linked smart objects. Just a question about possible workflow.
I work with large layered docs in the 2+GB range. It can get slow, particularly saving and opening.
Idea 1) I use textures on seperate layers. Just by lining the PLACE My file size will be smaller. I'm guessing saving will be faster.
Idea 2) Would it be possible. To work on a lower resolution "proxy" (example final version are images 10,000 x 10,000). Use all layers as SO, downsampled to 2k x 2k.
Everything will be much faster. But all my changes (Blend modes, Opacity, Smart filters) are on the Proxy images.
Now I want to generate my 10K version, could I swop out those 2k images in a folder for the High res?
Have PS "update?"
Maybe It would be required to change the image size to the 10K resolution, then update the Linked SO?
I'm just thinking if this could be possible.
Would save a ton of HD space, Make everything run quicker up until the final step.
What do you guys think?
Maxi
Linked Smart Objects

I've done a test.
Swopping a high res for the low res image does work, but PS does not respect the scale. So the image comes in very large.But if I reveal all. I can get the full image to appear. And Smart Plug ins like NIK Analog Efex do rerender at the full res.

How do you update the location of linked smart objects?

The new linked smart object feature was a low-key feature but it's fundamentally changing our workflow for the better!
Quick question, is there a way to update the paths to linked smart objects or will Photoshop work it out? I can't see a links panel under WIndow or file so am not sure how you do it sorry.
I'm about to edit these files at home and want to make sure Photoshop can find the links - as well as find everything when I copy it all back to the server and work.
Cheers
ben

Yes, the linked smart object can be either raster or vector, but they will be placed as raster images, just as the embedded SO are. SO can be embedded or linked to an outside file. Edits to the original will not update in the original until you select "Update modified content from the menu" when you reopen the file that has the place SO in it. otherwise it will update when you save the linked file. Yes, there still is an advantage to having an embedded SO. You may not want to maintain the links - send a file off and forget to include the linked files. You may want to alter the SO, but not the original file.
Ah, thanks. But does this mean that raster and vector smart objects can EITHER be located within the Photoshop file (as they have been since their advent) OR linked to an external file?
And if so,
1. Can this linked file be either raster or vector?
2. Do edits to it automatically update the Photoshop file?
3. Is ther any longer any advantage to having the smart object data stored within the Photoshop file when it can be linked?

Linked Smart Objects missing after last CC update?

I had an update come across CC for Photoshop & Dreamweaver yesterday. After applying the update I'm finding that linked smart objects are missing from my File>Place menu. Anyone else having this issue? I had them before & now they are gone. CC shows me as having no updates available. Just checked Photoshop & it's showing I'm back at 14.0.

Sounds like the updater failed and you are running 14.0.0 again.
Uninstall and reinstall.

CS5 is opening raw files as a smart object to files im currently working

I just bough new CS 5 and find this big error. When i open raw file in Camera Raw and i have opened some jpg in CS5, it always opened as a smart object to this small jpg i have opened before. The same is doing my CS 5 when i drag some file from desktop, it always ended as a smart object in file im currently working with. Normaly it has to open as a new file not as a smart object in this file im already working with.

How are you opening your RAW files? If you are dragging and dropping them onto Photoshop, on top of an already opened file's workspace - all files will be placed as smart objects. If you drag the files to anywhere else in the interface, for instance the grey area on top of the workspace, they should open as usual. If you are opening them via Bridge or by double-clicking them in Explore, they should open as normal.

Linked Smart Object: Allowed File Type and Editor

Similar Messages

Maybe you are looking for