Linker Conflict between UnicodeString and FilePath

I am trying to include ai::FilePath to my project using its two header files "IAIFilePath.cpp" and "AIFilePath.h"; however, there seems to be a conflicting function in each defined by static void check_result(AIErr) that is defined in both, as a result I'm getting linker errors.
Any ideas anyone?
Thanks in Advance.
Jeremy

1>j:\signplugin\illustratorapi\illustrator\iaiunicodestring.cpp(54) : error C2084: function 'void check_result(AIErr)' already has a body
1> j:\signplugin\illustratorapi\illustrator\iaifilepath.cpp(29) : see previous definition of 'check_result'
in my souce files both IAIFilePath.cpp and IAIUnicodeString.cpp define check_result in the ai name space.
I have temperarly cured it by editing the IAIFilePath.cpp file and commenting its definition out... but still concerned as to how this happened in the first place.

Similar Messages

Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device.

Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI. Sample rate 42804 recognized. Check conflict between Garageband and external device."
(Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
There's also a sound of static.
The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
Tony

Hello,
open your Audio MIDI Setup utility and set the input to 44100
https://discussions.apple.com/message/12710638#12710638

How can I resolve conflict between itunes and Windows 8.1

When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer. It is fine on other devices such as ipad and Windows phone. I can also pick up emails on online on the same laptop. There appears to be a conflict between itunes and Windows 8.1

Please see Boot Camp for comments.

[JS CS3] Conflict between palettes and panels

Hello,
I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long.
I have a window of the palette type. This palette has buttons and radio buttons. The buttons call up various functions.
The radio buttons, however, make visible/invisible a series of panels in the palette. The panels are stacked upon each other, only one of which is visible at any one time, depending upon which radio button is selected.
One of the buttons in the palette calls up another palette (which also has a series of buttons for various functions). Let's call it the little palette. The problem is, that after the little palette is called up, the radio buttons in the big palette no longer work. I can select them but they will not make visible/invisible any of the stacked panels. The buttons in the visible panel work as well as all the other buttons that are always visible. The only thing that does not work are the radio buttons.
My only workaround is to just dismiss the palette and call it up again. But I'd rather fix this bug.
Any ideas? If I need to I can strip down the coding leaving only the essentials, but rather not take the time if this is a problem others have run into and hopefully have a solution for.
Thanks,
Tom

Thanks. I'll give it a try, but I even uninstalled both programs, tried
reinstalling Reader only, and when that didn't work, uninstalled Reader and
then reinstalled Acrobat. Still a problem. The particular website is
www.officeally.com, and it opens the PDF file in a browser window, I believe
using an ASP file.
Larry

Search (priority) of linked contacts between iCloud and facebook

Hi,
on my iOS I have linked contacts between iCloud and facebook. There have to be a priority, at least for searching for details in the contact, because i only find some of the contacts that a have a same note set by me in the iCloud card. When I link contacts with different names, the unified contact get the facebook name. Then I can't search for the details I have set for the iCloud card. If I choose "Use This Name For Unitief Card" of the iCloud card, I can search for it's details from that moment on.
Can I set this generel priority to iCloud?!

does nobody has the same problem/can reconstruct the behaviour?

Name space conflict between static and instance method

Hello,
there seems to be a very unfortunate name space conflict between static and instance method name. Consider:
static String description() that should return a description of a class.
String description() that should return a description of an instance.
That seems to confuse the compiler. How come? Static and instance methods don't have anything to get confused about.
Thanks for any insights :-)

Umm...jeez.
It's not a bug, it's the way it's supposed to be.
Since a static method can be called the same way an instance method
A instance = new A();
A.staticMethod();
instance.staticMethod();it's not allowed.
Also in the class, you can call
public void myMethod() {
instanceMethodInClass(); // You don't need this, it's superfluous
staticMethodInClass(); // You don't need the class name.
}If you didn't understand, then just accept the fact that it is so. Some day you'll understand it.

Software conflict between iPhoto and Sony MP3 player

I am experiencing a major software conflict between iPhoto and my Sony MP3 player (model: NWZ-E443). In the past, whenever I connect the MP3 to my 2009 MacBook Pro, iPhoto always opened. I would simply close iPhoto and everything would be OK, though. But after upgrading iPhoto a few months ago via an upgrade download I am now unable to view images full-screen. Although thumbnails display OK, when I double-click on any of them to display full-screen, the MP3's 'Do Not Disconnect' image displays full-screen instead, even when the MP3 is not connected.
I have tried reinstalling iPhoto from the original iLife disc, but this didn't work and my fear is that the Sony software has somehow corrupted every image single file in my library.

Turns out my Mac put code on the mp3 player because after I reset the mp3 player to its 'factory settings', (erasing everything) it went back to normal and now shows up in the finder window.

Conflict between VPN and Airport disk

Hello Folks, I just bought a brand new airport extreme 802n.
I thought it would be working fine with my Macbook pro, but it doesn't.
I can't access any externe hard disk or USB Stick through the airport extreme, although the format is FAT32. I checked and checked but found nothing useful. All the settings are default.
Worth to mention, I always use a cisco VPN client to get connected to the Internet (university student).
There are few times when I disconnected the VPN Client, the USB Client can be found and read, but not be written.
I though it is a conflict between VPN and Airport disk. So I tried without VPN, but the USB stick and the extern hard disk still didn't work properly. I have no idea what is happening could somebody help?
By the way is it possible to set Airport extreme as a VPN router so I don't have to use the cisco VPN client anyway?
Any reply is appreciated
Thank you !

I have an Airport Extreme connected to a cable modem
with comcast as my isp. The Extreme is connected to
a G4 dual processor mac via ethernet. I also have 3
airport expresses around the house to work as range
extenders. When I had the G4 connect to the Extreme
via its internal airport card, I had no difficulty
connecting to any of the Expresses around the house
with my g4 powerbook. Now that I have the G4 Dual
directly connected by ethernet to get the fastest
speed, I cannot get my expresses or my laptop to
connect through my laptop to the base station. all
lights are green on the expresses, but running
network diagnostics on the powerbook shows red or
yellow for the last two buttons on the right. Do I
have a configuration problem or an Extreme that won't
bridge properly?
Check that the G4 Dual has a location configured with
only "Built-In Ethernet" activated, and that its
Ethernet connection isn't shared on AirPort.
Turn off all your AX and check that your
PB G4 is able to connect to "your" AirPort network.
Take advantage of this silence of all your AX
to run an analysis of your wireless environnement:
- check that you don't have any neighbor wireless
network,
- check that on each of your AX settlement you have a
very good reception of "your" AirPort network.
If everything works fine to that point, add one AX to
your network, and check the reachability of your network
where you wanted to extend it.
dan

Link Table between CRM and ERP

Hi Experts,
Does anyone knows the link table between CRM and ERP for Contact Person (Buss Part) CRM and Contact Person ERP.
In my customer system, contacts are automatically duplicated in CRM.
When you make a change in ERP, this change is automatically done in CRM.
So I suppose that there is a table between the both systems to find the corresponding number...
Thank you for your help and hope my English is good enough to understand :o)
Best regards,
Luis.

Hi Micky,
Thanks for your answer.
Unfortunatelly, number are differents...
I move this question to CRM forum ;o)
Kr,
Luis.
This has been solved in this thread:
Link Table between CRM and ERP
Edited by: Luis Loredo Marino on Feb 24, 2010 1:24 PM

Sharing linked files between mac and pc

Dear Community and AI Support,
My team is trying to share AI files between Macs and PCs. That works fine until we have Linked assets. Once we have linked assets, AI either forgets to, or is unable to, let us relink more than one of the linked files. We can't edit the links or even delete them. The linked files are just ignored, leaving the file half empty.
We've tried hacking the paths directly in the .AI file, hoping to eventually write a perl script to help us switch back and forth. but no luck. We assume there is a checksum or crc code or hash, etc..., as AI won't even try to open the file after that.
But to clarify the issue. here is an example of the Mac and PC links we need to switch between using an excerpt from the AI file. These are valid, working directories on both platforms.
Mac flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>/T/source/stories/00002/characters/puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Win flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>T:\source\stories\00002\characters\puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Thanks! :]
Chris

ooohhhhh very interesting. I did a find and replace on all the strings, but no dice. I didn't think to look at those types of data. But now that you have mentioned it, perhaps I'll do a diff on the same file saved on both platforms to see what has been changed. Should have already thought of it, but your note has made me check my assumptions.

DB Link issue between 8i and 11g

Hi, We have developed the shell script to connect oracle 11g database and do something and then update the oracle 8i database tables using the DB link. We have created the Public DB link in Oracle 11g database.
When we execute the script manually everything works fine. But while executing the same script using the LINUX - crontab the script failed to execute the DB link and throws the below error message
Error Message:
=========
ORA-12154: TNS:could not resolve the connect identifier specified Error loading the files
Anyone come accross this error before? please help
Thanks in advance

user4883361 wrote:
Hi sb92075:
How about Easysoft ODBC-Oracle Driver?
http://www.easysoft.com/products/data_access/odbc_oracle_driver/index.html
does this driver will permit me to create a DB link between 11g and 8i?
Thanks
Since it is not possible to prove a negative, you are left with the challenge to prove me wrong.
If you can make it work, then I was incorrect.
Please post your conclusion here, after you determine the answer to your question.

Link aggregated between NAS and a switch: the Mac as a very slow access...

Hello,
in my Office we're working with Macs and PCs and all the data is on a NAS.
Here is our configuration:
NAS <-link1->Switch<-Link2->Macs or PC.
Macs are connected with AFP protocol (because SMB is very slow).
We want to use Link Aggregation between the NAS and the switch (with 802.3ad procotol) but when we do that all the Macs have a very slow access to the NAS. But all is OK with the PCs.
What can we do? Is there a problem with macOS X and link aggregation?
Thank you for your help.
Nicolas

Sorry, not sure what the question is exactly.
You must have an Xserve, or Ethernet cards capable of Jumbo Frames for one, I assume the Switch & NAS are capable?
Possible clues...
http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c3ha3.html
http://discussions.apple.com/thread.jspa?threadID=1715388&tstart=0
http://www.macnn.com/articles/04/06/21/link.aggregation.for.macs/
http://www.smallnetbuilder.com/content/view/30556/53/
http://www.afp548.com/forum/viewtopic.php?showtopic=8309

Conflict between audigy and Olympus voice recor

I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
Any suggestions?
(5. sourround)

Bazbear wrote:
Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
Bazbear
Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff.

Metadata Conflicts between LR4 and CS6

I recently upgraded to LR4 and CS6 Extended. I will offer start in LR4 but switch to CS6 for additional editing. On some of my thumbnails, I will see a "!" in the upper right hand corner on the thumbnails. When I click on the icon, a pop-up window appear stating a Metadata conflict has occurred. The pop-up window gives you two options: Copy file data into the catalog or have the catalog overwrite the file data. What is the best thing to do knowing you are only working between LR4 and CS6?

This is a known issue with the latest PS update. Refer to the pertinent thread on the PS forum.
Mylenium

Linking files between Macs and PCs in InDesign

I'm Mac, my colleagues are PC.
They have removed the letter mapping from their server links to enable me and them to share InDesign files seemlessly. This works perfectly until an Indesign file draws graphics from two (or more) seperate servers. In this case, Indesign for me can only draw links from the server in which the file is saved. All graphics from the other server appear broken.
I'm sure PCs and Macs co-existing isn't rare. And I'm sure using graphics from multiple servers also isn't rare. How do I get around this problem?
Many thanks,
Nicola

All graphics from the other server appear broken.
What happens when you attempt to relink them?

Linker Conflict between UnicodeString and FilePath

Similar Messages

Maybe you are looking for