Linking 2 PDFs in the same web page

I'm trying to find the coding to link 2 or more PDFs into one embeded Adobe Reader in a web page.  Click one and it loads in the embed reader below.  Click the other and it loads that one instead.  I'm sure it exists somewhere, but I haven't had any luck in finding it.  Any input?

WM,
The best you can do is place Text in your Sheets and/or their tables and other text containers, and then use the Find feature to locate and jump to them.
It works quite well, in my opinion. Find will not search for Sheet and Table names, but if you use Cell A1 to contain the Sheet and/or Table name, Find will take you there in short order. If your Master Sheet has a cell displaying "Cow", you can select that cell, Command-C to copy, Command-F to raise the Filter panel, Command-V to place "Cow" in the search filed and use the arrow buttons to take you to each instance of Cow in the document, in turn.
Jerry

Similar Messages

  • After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
    * Preferences that have been modified are shown as '''bold (user set)'''.
    * Preferences can be '''Reset to the default''' or changed via the right-click context menu.
    -> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
    * Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
    * Change value from 0 to whatever you want over 0 (Default value is 50)
    * click OK
    -> Close the '''about:config''' tab and then Restart Firefox.
    See this post:
    * https://support.mozilla.com/en-US/questions/860894#answer-229574
    Check and tell if its working.

  • MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

    MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

    Go step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    3. Deselect Proxies if selected.
        System Preference > Network > Advanced  > Proxies Tab
        Under "Select Protocol", uncheck any box if selected.
        Click "OK" then  "Apply”.

  • Links to other locations on same web page not working in FF6

    On my 32 bit Windows 7 machine with 4 GB of RAM, all links worked with FF up through version 5 and links to other pages and/or sites still work in FF6 but not those to the same page (bookmarks). Load the same page in ie8 or ie9 and those links work perfectly.

    Safe Mode had no effect. However, I added a link on the page to another site in order to see if it was only the "bookmark" (same page) link that wasn't working. As it turns out, neither type of link works in FF6 but they do work in ie9.
    So I tested another site built by me and the links work perfectly.
    I also tested both pages on another computer using both browsers and got the exact same results.
    It is obvious that something about the pages on the new site are in conflict with FF6 but not with ie9 but, I can find no differences in the way the page is set up (including the DOCTYPE) or in the way the links are built.
    Any suggestions about where to look would be most appreciated.
    Thank you.

  • Hebrew and English on the same web page

    I am having a problem displaying Hebrew on my web page.
    I have figured out how to have the right-to-left display, but when I publish it, the font does not seem to work (I get all ?). I keep going around in circles as to why this is - a dreamweaver issue (character set, right now the page is set to iso-8859-1, but I have tried UTF-8 with the same result), or if this is a compter problem (I don't think this is the issue, as I am able to see the hebrew characters in Word, Dreamweaver (when I am typing), and all other programs.
    Any help would be appreciated for those who have dealt with this bilingual program.

    There is a Middle Eastern version of Adobe Dreamweaver CS4-ME, with full support
    of Hebrew, Arabic, Farsi and other languages,
    see http://www.fontworld.com/me/dreamweaverme.html

  • Two Flex app on the same web page + BlazeDS

    Hi,
    On our welcome page, we have two small apps that display advertisement; they are both identical and use BlazeDS. When the welcome pas shows, I always have one of the app that receives this fault :
    [RPC Fault faultString="Detected duplicate HTTP-based FlexSessions, generally due to the remote host disabling session cookies. Session cookies must be enabled to manage the client connection correctly." faultCode="Server.Processing.DuplicateSessionDetected" faultDetail="null"]
    I feel the problem comes from the fact that two apps from the same page access the same service at the same time. Am I wrong?

    Hi. I believe you are right. Using a HTTP sniffer such as Charles to look at the HTTP headers would tell us exactly what is happening but I think we can assume that you are in the ballpark.
    If the server gets a request with no session cookie header, I think it will create a new session and then send a Set-Cookie header on the response with the new session id. It is likely that if both your apps are making their initial requests to the server at roughly the same time that neither of the requests has a session cookie header. In that case the server is probably creating two sessions, one for each request and that is likely causing problems.
    While I haven't tested this particular scenario, I have been doing some testing around session cookie handling in BlazeDS recently. I would see if you can workaround this problem by already having a HTTP session established with the server before either of your apps runs. One way to do this would be by having a jsp page redirect to your welcome page. The call to the jsp page would cause a session to get created on the server. The server would return a Set-Cookie header with the new session id. The browser would then request the welcome page sending a session cookie header on the request. Your apps would load. Each app would make its initial request to the server only this time the requests would contain a session cookie header for the same valid HTTP session. . . and you would avoid getting duplicate session detected errors. . . at least that's I hope would happen.
    If I have some free time I will try running through this scenario (having two small apps on the same page) and report back.
    Hope that helps.
    -Alex

  • Just got my MacBook Pro....having trouble opening up certain web pages...just keeps scrolling and scrolling, my 7 year old desk top that is on the same wireless network for internet opened up the same web page right away, so I think the Internet is OK

    just got my MacBook Pro and I'm having trouble opening up certain websites, it just keeps scrolling and scrolling and never opens up the page....this is not the case with all websites, however my 7 year old desk top - which is connected to the same wireless Internet connection opened up the same page right away, so I don't think it's the Internet, any suggestions?

    Use Software Update to update your os and anything else that needs to be updated.   Repair permissions and restart your computer when done.
    Not sure if your new Mac came with 10.7.2 pre-installed as you make no mention of your os system.

  • When I open new tabs, how do I set my tabs to open to the same web page every time?

    I have my home page set, but I don't see an option to set what site my tabs open with. I did have a website opening in my tabs, but it wasn't a change I made. According to one of the help articles, an extension may have changed what site kept appearing in new tabs. Now, my tabs are back to the eight tiles, but I'd like to set them to a specific website. How do I make this change to my tabs?

    You will have to open the <b>about:config</b> page and set the new tab page by changing the value of the browser.newtab.url pref via the right-click context menu as stated in the KB article.
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config

  • IOS password autofill for more than 1 account on the same web page

    Can Safari in IOS 7 remember more than 1 login info for the same website?
    When I try to save 2 sets of user names and passwords for the same website it only autofills the last one set when I try to go back to the website.
    thanks
    Carlos

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to use multiple iPods, iPads, or iPhones with one computer

  • When I click on a link, I would like the new web page to open in the same window. What settings do I need to do this ? Thank you.

    I tried the options / tabs and I could not find a setting for this. I am running Windows 7 with Firefox 5.0 Thank you.

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

  • Communication between JApplet and Applet on the same web page

    Hi Freinds
    I have a JSP page containing two applets as follows :-
    <jsp:plugin type="applet" code="TreePageJavaClass.class" codebase="/MYOA" width="200" height="300" name="Applet1">
    </jsp:plugin>
    <jsp:plugin type="applet" code="TreePageJavaClass2.class" codebase="/MYOA" name="Applet2" width="200" height="300">
    </jsp:plugin>
    First applet extends JApplet class and has a tree constructed using swing.
    Second applet extends Applet class.
    Now I want to call a method in second applet on selecting a particular tree node on first applet. I can call method on second applet from first applet when both extends Applet class (not JApplet)
    So please tell me what's the problem here and how it can be solved.
    Thanks

    There is a Middle Eastern version of Adobe Dreamweaver CS4-ME, with full support
    of Hebrew, Arabic, Farsi and other languages,
    see http://www.fontworld.com/me/dreamweaverme.html

  • I can't print from firefox. The paper feeds throught the printer but does not print. The same web pages will print when I use internet explorer. And the printer works fine with word, excell etc, just not with firefox.

    Whenever I try to print any page opened in firefox it will not print. The paper feeds through the computer, but does not pring.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Communication between two JApplets on the same web page

    Hi Freinds
    I have a JSP page containing two applets as follows :-
    <jsp:plugin type="applet" code="TreePageJavaClass.class" codebase="/MYOA" width="200" height="300" name="Applet1">
    </jsp:plugin>
    <jsp:plugin type="applet" code="TreePageJavaClass2.class" codebase="/MYOA" name="Applet2" width="200" height="300">
    </jsp:plugin>
    First applet extends JApplet class and has a tree constructed using swing.
    Second applet extends Applet class.
    Now I want to call a method in second applet on selecting a particular tree node on first applet. I can call method on second applet from first applet when both extends Applet class (not JApplet)
    So please tell me what's the problem here and how it can be solved.
    Thanks

    First Applet :-
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.tree.*;
    import java.applet.*;
    public class TreePageJavaClass extends JApplet {
    JTree tree;
    JTextField jtf;
    Container contentPane;
    public void init() {
    contentPane = getContentPane();
    contentPane.setLayout(new BorderLayout());
    DefaultMutableTreeNode top = new DefaultMutableTreeNode("MakeYourOwnAds");
    DefaultMutableTreeNode a = new DefaultMutableTreeNode("User1");
    top.add(a);
    DefaultMutableTreeNode a1 = new DefaultMutableTreeNode(getParameter("param1"));
    a.add(a1);
    DefaultMutableTreeNode a2 = new DefaultMutableTreeNode(getParameter("param2"));
    a.add(a2);
    DefaultMutableTreeNode a3 = new DefaultMutableTreeNode(getParameter("param3"));
    a.add(a3);
    DefaultMutableTreeNode a4 = new DefaultMutableTreeNode(getParameter("param4"));
    a.add(a4);
    tree = new JTree(top);
    int v = ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED;
    int h =ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED;
    JScrollPane jsp = new JScrollPane(tree, v, h);
    contentPane.add(jsp, BorderLayout.CENTER);
    jtf = new JTextField("", 20);
    contentPane.add(jtf, BorderLayout.SOUTH);
    // Anonymous inner class to handle mouse clicks
    tree.addMouseListener(new MouseAdapter() {
    public void mouseClicked(MouseEvent me) {doMouseClicked(me);
    void doMouseClicked(MouseEvent me)
    TreePath tp = tree.getPathForLocation(me.getX(), me.getY());
    TreePageJavaClass2 app = (TreePageJavaClass2)getAppletContext().getApplet("Applet2");
    if(tp != null)
         if (tp.toString().equals("[MakeYourOwnAds, User1, Ajay]"))
         jtf.setText(tp.toString());
              if (app == null)
              app.setData("null");
              else
                   app.setData("Ajay");
         else
              jtf.setText(tp.toString());
    else
    jtf.setText("");
    Second Applet :-
    import java.awt.*;
    import java.awt.event.*;
    import java.applet.*;
    public class TreePageJavaClass2 extends Applet
    private Label msg;
    public void init()
    setLayout(new BorderLayout());
    setBackground(Color.LIGHT_GRAY);
    msg = new Label("Applet2 is running...", Label.CENTER);
    add(BorderLayout.CENTER, msg);
    public void setData(String message)
    msg.setText("Selected Node is " + message);
    Hope you guys will help me.
    Thanks

  • I have a pdf registration form on my website.  It has a link that take the user to a payment page within my website.  They pay then submit the form.  The link currently opens in the same browser tab as the form and the user thinks that is the submission,

    I have a pdf registration form on my website.  It has a link that take the user to a payment page within my website.  They pay then submit the form.  The link currently opens in the same browser tab as the form and the user thinks that is the submission, which it is not.  I want my link to open into a new browser tab.  How do I do that?

    You can use the following JS code:
    app.launchURL("http://www.example.com", true);

  • Action link URL calling from another screen from the same web server not work

    Hi there,
    I have an action link URL calling from another screen from the same web server, used the following syntax:
    /analytics/saw.dll?Go&path=.....
    But it is not working, when open the page, it shows error message
              Oops! Google Chrome could not find analytics
    Any help? Thanks!
    Ling

    That's a +1 from me... same issue and yes, isn't inelegant or a shortcoming for some might be the cause of boldness as they rip their hair off their head so thanks in advance for keeping the refinement of the magic potions making the EA secret magic sauce... which may help stop hairloss
    Cheers!
    tfbkny

Maybe you are looking for

  • 865PE Neo2-PLS users running on Prescott 3.0Ghz and above please come in

    It's showing garbage for the cpu voltage in my bios and for those who read my previous posts know what I mean as I had posted the pictures before. I have flashed with different bios ver, tested using different psu, graphics, rams but no luck. Tested

  • BDC_OK code for scrolling in custon table control

    Hi All, I have a requirement to create a BDC program for transaction ME31K, but the problem is this ME31K transaction is enhanced adding a custom screen which has three custom table controls. Now this screen is also included in the BDC program. I am

  • Creating server proxy from FM

    Hi all    I have a Function module ,I want to generate a server proxy from this FM.    How can i do it?Can anyone please help me?I don't want to use RFC Adapter. thanks in advance.

  • Address Book crashing after upgrade to 10.7.2

    Haven't been able to find anyone else experiencing this problem. Since I updated to 10.7.2 Address Book hangs and closes about a minute after opening. It doesn't seem to make a difference what action I am performing, if any. I have tried deleting pre

  • Windows 8.1 and no wifi

    Hello, I just upgraded from 8.0 to 8.1 and the wifi doesn't work at all. I googled it and it seems a common problem since the preview release. I reinstalled the driver many times but nothing changed. I tried to install the beta driver that is in the