Linking Analyzer views

I'd like to do the following with the Analyzer:On the 1st view, the user selects his unit with a dropdown field. When he changes then to the other views (4 in total), his selected unit should be active for the tables and charts there. I can link certain cells of a table to other views with the "drill to" function. But the problem is: how can I link a dropdown selection and/or a Page selection?And is there another way to drill to another view than doubleclicking on a cell?Sorry if this sounds confusing, though for you experts out there it should be easy to understand anyway... Thanks in advance!

Try right clicking on the dimension you wish to drill from. When you define the drill link, click the checkbox to pass the filters and/or the page selections from the report you are drilling from to the report you are drilling to.dchurch

Similar Messages

  • Replication Link Analyzer Unusual Error

    Just finished upgrading my Heirarchy to SCCM 2012 R2, everything is fine after migration and the environment has been stable for several weeks.
    One site however, is showing warnings for Replication. The replication isn't failing, its been up to date at the site, but 3-4 hours behind on its most recent synchronization. This time delay seems to be within tolerance, and hasnt caused any problems.
    In troubleshooting that issue, RLA returns the following message. I dont understand and can't find any reference to the tested Local System account its referring to in the logs; and of the servers involved in this Replication, both have sysadmin access on
    the Database.
    "Replication link analyzer detected Database PS1 does not have a valid security scope for Local system Account. Please make sure Login for local System account exists and it has sysadmin role assigned".

    Hi,
    What's the error in rcmctrl.log, replmgr.log? Have you enable verbose?
    You could follow the blog below to troubleshoot replication issue.
    http://blogs.msdn.com/b/minfangl/archive/2012/05/16/tips-for-troubleshooting-sc-2012-configuration-manager-data-replication-service-drs.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to add SharePoint 2013 Promoted link list view web part in page programatically with Tiles view using CSOM.

    How to add SharePoint 2013 Promoted link list view web part in page programatically with Tiles view using CSOM. I found that it can be
    done by using XsltListViewWebPart class but how can I use this one by using shraepoint client api.
    shiv

    Nice, can you point me to the solution please ?
    I'm  trying to do this but I get an error : 
    Web Part Error: Cannot complete this action. Please try again. Correlation ID: blablabla
    StackTrace:    at Microsoft.SharePoint.SPViewCollection.EnsureViewSchema(Boolean fullBlownSchema, Boolean bNeedInitallViews)     at Microsoft.SharePoint.SPList.GetView(Guid viewGuid)   
    All help really appreciated.

  • Link to view responses bringing up error message

    My customer is encountering an error message when they click on teh link to view the response table.
    The error message reads 'That URL is not in the corect format for an Acrobat.com document link'
    The link works for me but they encounter this message each time?

    Sorry for the late response. I am not sure if you still have this issue. What I have seen in the past is that the text ofr the link and the associated url to that text in a email do not match. You might want to send the link that works for you again to your customer.
    Gen

  • View link between view based on entity(table) and view based on stored proc

    I've created a view based on a stored procedure. I need to link this view to a view based on an entity which is based on a table.
    I can create the view without issue, but when I attempt to run the application module that contains the relationship I get this error:
    (oracle.jbo.InvalidOperException) JBO-26016: Cannot set user query to view "SalesentityModuleApiView2" because it is a destination in a view link
    One thing that may be notable about this is that this view started out based on a database view. I later overrode the select related methods using the example here:
    http://download-east.oracle.com/docs/html/B25947_01/bcadvvo008.htm
    Any ideas? I will gladly post some code if someone will let me know what might help diagnose this.

    Hi,
    I solved my problem with adding transient field, and changing the value of it (true | false) on set method of field that can be changed so I can get which row was updated. What exactly do you mean when you say not updateable, I'm using a vo with no entity, and I can add, remove rows, in fact I think it's a good solution because I don't want to write to database immediately.

  • Linking the views

    Hi,
    i am facing a problem while linking two views in the bsp application (under the same controller).
    i am using the anchor tag <a> for the hyper reference,
    because i have to link the views through hyper reference only,
    can anyone please tell me the right way to do it.
    regards,
    Aayush

    Hi,
    As per my understanding, your requriement is: (Correct me if i am wrong).
    You have one default View and Window. In the View you are displaying the menu bar. Each menu bar item contails one specific URL. When user clicks on any of the menu bar item you need to open the corresponding URL in the same View.
    1)  Take the view set with two rows. In first row add the default MenuView (menu bar) and in second row embed another View (For example: ResultView).
    2). In RestultView create IFrame UI element (Note : it is deprecated). And bind one cotext attribute to url.
    Map this context attribute to MenuView also throug the Component Controller.
    3). Create inbound plug to MenuView and outbound plug to ResultView. On click on any of the menubar items change the URL in the context attribute and then navigate to the ResultView through plugs.
    Regards,
    Charan

  • A web link I viewed has remained as a tab I cannot remove or close . How can I get this off? ?

    I was using Bing on a topic-family trees- yestrday. One link I viewed has hijacked my browser and Icannot close it. Help, please.

    Just click to open 360.com and once there you can opt out.
    Wow, how easy is that, and as far as I can see it works

  • Links and View Sizes

    Using Acrobat 8, I have a long single page document with a set of links at the top which relate to articles down the length of the document.
    When I use the link tool to set these the destination always appears at the magnification I was using when the link was created. If go back and edit the link to make the destination inherit the view that was being used when the link was clicked the link breaks because this only appears to work on multi-page documents, and the link becomes the top of page 1.
    There is a feature called destinations which allows me to jump to another part of the same page, but that only works with a single fixed magnification, so the magnification changes to whatever it was when I set the link, and there appears no way of making it inherit the magnification used at the moment the link was clicked.
    I have exactly the same problem with any bookmarks I create.
    The last time I used Acrobat to make I was using an earlier version which used a different method to define the link destination that therefore I'm pretty sure it was possible to do what I want.
    Anyone know how to achieve this in Acrobat 8 (is it possible in 9)?

    No that doesn't make any sense or answer my question either...
    I've found more problems with this since my initial post.
    In the end for the sake of getting the job live, I set my initial view to 100% and all my linked and bookmarked views also to 100%. I went into the document properties dialogue and set it to resize the window to the initial page on opening the document.
    However on the next opening of the PDF although the initial view of the document was 100% all my link and bookmark views were now something like 55%. From what I could see it appeared that these had scaled down in proportion from the document window size (full wide screen) to the size the window was when reduced to fit the document at 100%.
    So of course I had to go through all the links and bookmarks again and reset them to 100% at the new window size.
    Either this whole concept of document view sizes is massively flawed and Adobe are ignoring the problems or Adobe's ideas of how links and views should work are completely different from mine (and many other users) in which case I would like them to explain their thinking behind how this works so maybe I can understand it too.
    For me a new link should always inherit to current magnification unless the author deliberately overrides this. That's certainly how I'd want to be navigating around a PDF.
    I the absence of any useful advice or rational from Adobe, I guess my next course of action will be to ask embarrassing questions at the next trade show where Adobe have a stand...

  • Analyzer View with external excel files

    I have "inherited" support of Hyperion Analyzer. I have a view that is a series of linked excel files. How do I add an additional excel document view? Where would I "point" these links in Analyzer?We are using Hyp. Analyzer 5.0.1

    Hi,I assume you are talking about the ability to view excel documents in Analyzer? Basically Excel views are saved into Analyzer via Excel itself. To be able to save views you need to have the Analyzer Excel plug-in installed. (Adds a menu to the toolbar for 'Hyperion Analyzer'). The toolbar has 'save' and 'save as' options. When saving it should be bring up a connection dialogue where you specify the Analyzer server name, user id, and password etc.Hope this helps.Paul ArmitageAnalitica Ltd

  • Using database-link in view to get around ORA-01031 error

    I have been granted select rights on a users table. I am therefore able to select from his table. If however I try create a view against his table I run into the ORA-01031 problem. I have worked around this problem by creating a database-link to myself and then adding that to the view creation and it works. What are the downsides of using the database-link in this way?

    The only down side I have been able to identify is that a extra session is created and that the CPU has a little extra work due to the LOOP BACK that takes place. I need to ensure the network is not unnessesarly used and therefore will need to ensure that 127.0.0.1 (local host) is used in the database connection discription. e.g.
    create database link my_db_link connect to scott identified by tiger using '(description=(address=(protocol=tcp)(host=127.0.0.1) (Port = 1521) ) (connect_data= (sid=ora10g)))';

  • Scheduled Discoverer report link for viewer in portal

    Hi,
    When a link for scheduled report for plus users is created in portal Oracle suggestes the following. This is good since it does not need the run number and the same link will work for all reruns.
    http://<host.domain>:<port>/discoverer/plus?cn=cf_a156&opendbid=SALES_ANALYSIS2&sheetid=42&workbooksource=Scheduled
    whereas for opening a scheduled workbook result in viewer the link needs the run number which prevents using the same link for every run.
    Do anyone found a way to workaround this
    Thanks for the help
    Jay

    Hi Jay
    I can see that you've had this posted for a little while so I thought I would at least let you know that I've read it. I'm afraid the answer is not what you hoped though as I don't know of a way off the top of my head to do what you ask.
    Sorry, regards
    Michael

  • How to maintain PDF links when viewed in Apple Mail

    Hi All
    I've created a single page promo flyer in InDesign which has an email and a web link at the foot of the page. The flyer is to be distributed to clients as a PDF attachment via Apple Mail. The PDF has been created from the InDesign doc and the links display and behave as they are intended to. When I attach the PDF to a mail it displays just fine. I want recipients to be able to click on and follow the links directly from the Mail view in a single action without having to download the PDF and then click on the links. However when you try to click the links the whole PDF highlights blue and no link is activated. Can anyone suggest a way to achieve this?
    I'm using Apple Mail v7.3 on an iMac running OSX v10.9.5.
    Thanks in anticipation!

    If you are asking about addresses that are not in your Address Book, they are listed in Windows > Previous Recipients.
    Allan

  • Using internal pdf links when viewing document online

    Hello
    I created a pdf document with internal links to different parts of the document. However, when I published it in Acrobat.com to share it, the links are no longer operational. Is there a way to keep the links operational when being viewed online? (Once you download them they're usable again)
    Thanks, Daniel

    Hi dalvo2002,
    I'm sorry, but links aren't rendered in the file previews that you see on Acrobat.com. The links aren't removed from the file (as you've discovered), they just aren't included in the preview.
    Best,
    Sara

  • Bad navigation bar buttons/links when viewing in browser

    i've created my own nav bar, but when i view it online, the buttons/links are out of line
    i.e. the page you view has the buttons below or above the horizontal of all the other buttons.
    this looks scruffy!
    everything is kosher when viewed in iWeb. none of the buttons overlap. i'm using standard web fonts (helvetica, courier).
    i'm scratching my head wondering what's gone wrong.

    here's one:
    www.drewpower.com
    i realised, after posting, that the offending button is the page title button you are on.
    e.g. when you're on 'links', the 'links' button is duff.
    my solution? well as they're redundant, i took em out.
    but any feedback would be helpful.
    ta!

  • Link to View all in New form

    Hi,
    I have a requirement where in i need to provide link View All for News iView created based on XML Form. On clicking on View All link new iVIew should be opened with all the news headline. Is it possibel to provide such link, if so how should i proceed.
    Regards,
    Ravi.

    When you are creating your XML Form, you should be able to add fields to the RenderListItem view.
    This is the view used when listing the news.  If you add all the content fields to this view, then the listing will have all the data you require.
    You can then create a link to that listing.
    Here is a link to the XML Forms Help in SAP Help.
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/8f/fe743c74fa6449e10000000a11402f/frameset.htm">Click Here</a>

Maybe you are looking for