Linking Audio Clips

I am trying to combine two different audio clips together so the music is "seamless" (no break in music)....right now I have the two audio clips on the same row underneath the video clips in the timeline...I do not see how to "link" these together? Right now the first clip ends and there is a few second break in the music before the 2nd audio clip starts.

Butt the two tracks against each other. Select the edit point and press Cmd-T to make a cross fade. Drag it out to make it longer.

Similar Messages

Linking audio clips in timeline

This must be as simple as I obviously am:
I would like to link some audio clips together (which currently run one after another) in the timeline in order that I can then drag them into the the viewer where I can then alter the levels and pans across the clips as a whole.
At the moment, when I select the clips and then drag them into the viewer, I just get the first clip as if taken from the browser, with the in / out points marked (i.e. what I originally dragged from the viewer into the timeline).
Have I explained this well enough? Can anyone help please?

as usual there a few ways you can do this .. just not the way you're trying to!
you can adjust pan for a selection of clips by choosing Modify menu > Audio > Pan Left/Center/Right
you can adjust the levels for a selection of clips by choosing Modify menu > Levels... which brings up the Gain Adjust window: in there you can make a releative or absolute adjustment to the selected clips
alternatively you could select those clips then choose Sequence meny > Nest Items which will create a new sequence containing those selected clips, replacing the selection in the current sequence with a single (nested sequence clip) ... then you can drag that one up into the viewer and adjust pan and levels as if it were a single merged clip
alternatively you can change your View menu > Playhead Sync to "Open"
then as you move your playhead in the timeline/canvas the clip under the playhead will be automatically loaded into the Viewer window where you can adjust pan/levels as required

Paste attributes prompt box (only 1st linked video & audio clip)

what is up with that box? how can I avoid this? I need to paste attributes to all 4 audio tracks and not just the 1st one!
The box reads:
Paste Attributes will only use the first video and first linked audio clip for parameters and content to be pasted. Do you wish to continue?

You'll get that warning if you copied more than one clip. The message is telling you that it will only paste the attributes of the first clip of the group you selected.
To avoid that warning, you should only copy ONE clip. After you've copied one clip you can then past the attributes of that clip to as many clips as you select.
-DH

How do you link two audio clips to one video clip?

Hi guys,
I want to think multiple audio clips to one video clip and aint know how to do it! I found this page on Adobe knowledge base:-
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS1c9bc5c2e465a58a91cf0b 1038518aef7-7f40.html
It says you can do it but I don't think it explains how? Can anyone provide me with the simple steps required to link two audio clips to one video clip? Many thanks.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

FR: Keep Video and Audio clips Linked in Multicam once razored

Here is my feature request, if you agree please cut and paste and submit to feature request!
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
*******Enhancement / FMR*********
Brief title for your desired feature:
Keep Video and Audio cuts in a Multicam sequence linked together when using the razor tool.
How would you like the feature to work?
Whether inside a multicam created sequence, or a multicam sequence that has been pasted into another layer on a separate sequence, I want the video and audio to remain linked together when a cut is made. Currently, when I make a cut, the audio and video become unlinked and I have to first a. make all the razor cuts, then b. go and relink the video and audio clips back together. Takes an extra 30 minutes every time now.
Why is this feature important to you?
To save time and stop the long redundant process of click selecting the video and audio and linking them, over and over and over, in a multicam sequence. Obviously if I can do it manually, it can also be done in-program.

When you create the multicam sequence manually (still the best way, I think), video and audio remain linked.

How to link multiple audio clip to one video?

I have multiple audio clips in the timeline but I can't link them all to a video in the timeline.
The "Clip" -> "Link" option is only enabled if I select a single audio clip.
Video:
http://www.bartelsmedia.com/vid/tmp_premiere_question4.swf
Could anybody help, please?

See
Group clips in the Premiere Pro Help.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Linking All Video and Audio Clips at Once

I'm running the most recent version of Premiere CC 2014 on OSX.
Somehow I accidentally unlinked every video and audio track on my timeline (I didn't make them offline - I unlinked them so that they select independently on my timeline when I want linked video and audio from the same clip to select simultaneously).
I don't want to have to go through my entire timeline and re-link every clip. Is there a way to easily select all media and link it? I've tried highlighting everything, right clicking and selecting "Link," but this hasn't worked.
Any tips would be appreciated.

I have to start you from the beginning to make sure everything is set correctly.
Under the Edit menu, make sure "Linked Selection" is checkmarked (also Shift+L).
Once that is done, make sure the video clip is linked the it's corresponding audio in the timeline. Do this by selecting them all, and choosing "Link" under the Modify menu (or hitting command + L).
Try that and if it doesn't work we'll go from there.
Joni

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

Embedding Audio Clips in PDF Document

Hello,
I would like to be able to embed very short audio clips/files in a document, with a "play" button/icon that allows users to click on it and here a brief text excerpt. Is this possible with Acrobat? Would I have to use Flash to accomplish this? Can someone point me to instruction on how to accomplish this task? Thanks so much for your help.

The exact process will depend on the version of Acrobat you have. In AA7, I just selected TOOLS>Advanced Editing>Sound Tool and added a sound file to the document. There were options for AA5 and AA6 compatibility as well as for embedding the sound file in the PDF.
When you select the sound file, it asks if you want to play the file or accept the file as trusted for future requests. The file then played just fine. When I added the link, I was given a box to use to surround the area of interest on the page. You can set the border color and such (like make it invisible, though that might confuse folks).
I am not sure what more you want. It is possible to add audio to open when you open the page also as well as set timing for the page. That would provide a way for the person to essentially have a lecture presented on your system without having to intervene. For the playing of the pages and timing, you may ahve to have the file open in full-screen, not sure.

Video and audio clips not moving together on timeline

So every time I move my video clips in the timeline, the audio clips are not following.
I know "make a stereo pair" links up the audios, but is there any way to make the video and both the appropriate audio tracks move together?
Thanks
D

Link them - select the video and audio tracks and press ⌘L.
Patrick

Trouble loading audio clips after frame 1

Hey, everyone!
The project I'm working on consists of a bunch of pages, each with narration. Each page is a separate frame on my main timeline. Due to all kinds of issues I was having, I am now loading in the audio via actionscript, rather than placing an instance of it into an object and going from there.
The issue I am now having is that when I tried to simulate a download, the movie would sit on frame zero until all audio was loaded, so it took a long time to get to my preloader, and by then the movie was just about finished loading. It was suggsted that I uncheck "export at frame 1" on my audio files, but now I am getting errors that I am making a call to a possibly undefined method (random audio file name of choice).
If I am loading my my audio via actionscript, do I have to load it all in on frame 1? And if so, is there any way for my movie to get to my preloader before trying to load things?
I have also tried setting my publish settings to export my classes on frame 2 or 3, in the hopes of it getting as far as my preloader before stopping, but no luck so far.
Any ideas?

I'm not sure I understand that last part --
Here's my setup:
I have my raw audio files, which are each linked to separate classes, named Frame1, Frame2, etc. Those classes are then called from separate movieclips (which also contain some actionscript to cue things in the movie at the proper time, etc).
So, do I put every movie clip that contains the call to the classes (the movieclips that are actually used in the project) on frame 1 (or 2, or whichever frame I have it exporting classes from), or do I put all the raw audio clips on that frame, or do I just write in code to have random varables call in each class name...?

Using Slip Edit tool on video and linked audio

Am not able to do a slip edit on a video clip that has a linked audio track w/o the two falling out of sync. After doing a slip edit on the video I have to go back and do a slip edit on the audio track separately, even though it is marked as linked, in order to re-align it w/ the video. Shouldn't I be able to do one slip edit on both the video and audio tracks at the same time and keep them in sync?
Jack

I understand that they're linked. If they're underlined they're linked. Linked selection is different. It's the behavior that controls what happens when you select a clip in the timeline. Check the linked selection button in the upper right of the timeline or check the Edit menu or use Shift-L.

When I move video clip, my audio clips (unlinked) split ??

I have separate video and audio clips on the timeline (they are not linked). When I try to move a video clip (or multiple clips at one time), before I let go of the mouse, the audio clip(s) below the video split, so that they are before and after the moved video clip. They are not linked together. How do I move a video clip without affecting anything else?
Thanks.

This might be helpful from some of my old notes. The ripple behavior can be overcome by the use of the CTRL
button. However it depends on whether you press CTRL before or after you start moving the clip. When moving clips
around in the timeline there are 4 basic types of movement Lift, Extract, Insert and Overlay:
The first two, Lift and Extract have to do with how the clip is moved OUT of it's current position. To see what I
mean, hover your mouse over a clip in the timeline, then press and release the CTRL key while watching the status
text string in the lower left of the application window, you'll see that holding CTRL before clicking and dragging
triggers the extract behavior (which tells the timeline that there is a gap being created that should be closed)
but clicking and dragging with no CTRL modifier allows the Lift behavior (which tells the TL to ignore the gap)
The second two, Insert and Overlay have to do with how the clip is placed IN to it's new position, that is,
whether it is Overlaid over exisitng footage without any ripple movement or Inserted within the existing footage,
causing any following media (including that on other tracks) to be rippled forward.
Since there is no way to lock down tracks in PE, you must always be mindful of what this default rippling behavior
is doing to overlapping media on other tracks.

How to get audio clips to play at site but not actually download?

Would like person to be able to listen only to audio clips but not to be able to download clip to add to their iTunes library. In other words, am selling an audio product, and while I'd like people to be able to hear samples at my site (built with iweb), I don't want them to retain clip. Any suggestions on how to accomplish this would be much appreciated!

Stopping people from downloading anything that's published to the internet is virtually impossible.
I would recommend that you first edit your files so that you only have about a one minute clip online....
http://www.iwebformusicians.com/AudioFiles/Import.html
Dragging you files onto the iWeb page is not the best way to present them as a large percentage of PC users won't be able to play them. The Wordpress standalone flash player is still about the best way to play audio and you have to know how to get into the source code to be able to download the files....
http://www.iwebformusicians.com/MusicPlayers/FlashPlayers.html
Or use a flash jukebox....
http://www.iwebformusicians.com/Website-Music-Movies/Flash-Audio-Jukebox.html
For the increasing number of people using iPhone/iPad you can use this dual player....
http://www.iwebformusicians.com/Website-Music-Movies/Wordpress-Flash-HTML5-Audio .html
or have an alternative page using HTML5 players.....
http://www.iwebformusicians.com/Website-Music-Movies/HTML5-Audio-Player.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Help Syncing audio clips from a double camra system

I am editing a short film in which everything was shot with 2 HVX cameras. I imported all the footage and labeled it with no problem.
Is it possible to link audio from other clips to different piece of video. What is the most efficient way of doing this?

the only way Ican think of doing this is kin dof dirty but it would be to create seperate movie files created from sequences where you would frankenstien the media how you want it. Really though, the best way of handling multi camera sync issue without using multiclip is to put the clips on a timeline and match them vertically.
Find a sync point like a sharp sound or video that can be distinguished between the two cameras and do your back and forth cutting that way.
Short answer, no there is no way of 'linking' audio from one source to another without creating it as it's own movie file.

Linking Audio Clips

Similar Messages

Maybe you are looking for